Steel Will

Filtra per
Categorie
Prezzo
Paese
Acciaio
Maniglia
Lunghezza lama, mm
Fodero
Chiusura
Filtro
Coltello da tasca Steel Will Modus Grey 7cm F25M-14
Folding knife Steel Will Modus Grey F25M-14 has 7 cm blade made of D2 steel. It is bright, interesting, and light assistant for any tasks EDC knife might face. Handle made of FRN. Total length of the knife is 17cm. Modus has pocket clip.
40,24 €

In magazzino

Coltello da tasca Steel Will Censor Spear Point 8.9cm F13-A1B
Folding knife Steel Will Censor Spear Point F13-A1B has 8,9 cm blade made of D2 steel. Since one of the most popular Steel Will models Censor had been released, there've been a lot of inquiries in regards to a folding option of this knife. And now we are ready to introduce you to F13 Censor – a folding blade bearing ideology of its' forerunner. And the succession is seen in every detail: the same blade shape, the same half-pistol shaped handle, which helps to grip a knife intuitively right, the same inlaid handle patter, the same breaker on the handle. The only difference is that now all those features are presented in a more compact folding flipper knife with a speedy opening. Handle made of FRN.
56,37 €

In magazzino

Coltello da tasca Steel Will Censor Clip Point 8.9cm F13-A3B
Folding knife Steel Will Censor Clip Point F13-A3B has 8,9 cm blade made of D2 steel. Since one of the most popular Steel Will models Censor had been released, there've been a lot of inquiries in regards to a folding option of this knife. And now we are ready to introduce you to F13 Censor – a folding blade bearing ideology of its' forerunner. And the succession is seen in every detail: the same blade shape, the same half-pistol shaped handle, which helps to grip a knife intuitively right, the same inlaid handle patter, the same breaker on the handle. The only difference is that now all those features are presented in a more compact folding flipper knife with a speedy opening. Handle made of FRN.
56,37 €

In magazzino

Coltello da tasca Steel Will Avior Red 8.9cm F62-05
Folding knife Steel Will Avior Red F62-05 has 8,9 cm blade made of D2 steel. The main characteristic of F62 Avior is its’ composition with a flipper put to the front. Due to this peculiarity and ceramic ball-bearings used, the knife has a really great flipping action - fast and smooth. Ergonomic G10 handle with finger hollows and evident choil allow for a comfortable grip of any kind - both during a hard work as well as when work should be precise and accurate.
52,34 €

In magazzino

Coltello da tasca Steel Will Onrush 9.4cm SW612
Folding knife Steel Will Onrush SW612 has 9,4 cm blade made of N690Co steel. Onrush is perfectly suit to be your EDC knife. It has textured G10 handle with pocket clip. Made in Italy. 
160,48 €

In magazzino

Coltello da tasca Steel Will Warbot 8.9cm F10-033S
Serrated folding knife Steel Will Warbot F10-033S has 8,9 cm blade made of D2 steel. Warbot is made for heavy duty and special tasks, and that could be seen in each its’ element: the flipper not only functioning to flip open the knife, but as a guard as well ensuring a reliable rest and a safe holding even in wet or weak hands; ergonomic G10 handle allowing for use in any grip without sacrificing comfort or grip reliance; glass breaker on the back of the handle, which could be removed in case it’s not needed and be replaced with a hidden screw (a special tool to remove the glass breaker is included); a solid design on washers and two full-sized liners guaranteeing overall steadiness of the knife, so it is able to assist the owner in any situation. Warbot clip allows for a deep and firm carry in the pocket.
95,97 €

In magazzino

Coltello da tasca Steel Will Warbot 8.9cm F10-03
Folding knife Steel Will Warbot F10-03 has 8,9 cm blade made of D2 steel. Warbot is made for heavy duty and special tasks, and that could be seen in each its’ element: the flipper not only functioning to flip open the knife, but as a guard as well ensuring a reliable rest and a safe holding even in wet or weak hands; ergonomic G10 handle allowing for use in any grip without sacrificing comfort or grip reliance; glassbreaker on the back of the handle, which could be removed in case it’s not needed and be replaced with a hidden screw (a special tool to remove the glassbreaker is included); a solid design on washers and two full-sized liners guaranteing overall steadiness of the knife, so it is able to assist the owner in any situation. Warbot clip allows for a deep and firm carry in the pocket.
95,97 €

In magazzino

Coltello Fisso Steel Will Adept Dagger 14.3cm SW1000
Tactical knife Steel Will Adept Dagger SW1000 has 14,3cm blade made of N690Co steel. The “Adept” is a gladius for modern day Spartans. Possessing an extremely comfortable G10 handle and remarkable symmetry, the “Adept” is equally comfortable for cutting and thrusting from any position. The “Adept” is a knife which simultaneously embodies the utilitarian practicality of a cutting edge product and the spirit of an ancient warrior’s weapon. Made in Italy. Kydex sheath. Full length is 27,8cm.
225,00 €

In magazzino

Coltello Fisso Steel Will Argonaut Drop Point 16.5cm SW820
Tactical knife Steel Will Argonaut Drop Point SW820 has 16,5cm blade made of AUS-8 steel. TPR handle with deep grooves ensures slip resistance, even when handled with wet or slippery hands. Two-side hand guard provides safety while performing even the most intense tasks. Full length 31,2cm. Sheath of the knife made of polymer.   
79,84 €

In magazzino

Coltello da tasca Steel Will Arcturus Black 9.5cm F55-03
Folding EDC knife Steel Will Arcturus F55-03 is 8.9" full length. Knife has 3.75" black stonewash finish D2 tool steel blade and black G10 handle. Extended tang. Pocket clip.
57,26 €

In magazzino

Coltello da tasca Steel Will Plague Doctor Green handle, black blade 8.6cm F16M-33
A new Steel Will knife designed by Vaeringi. Folding knife Steel Will Plague Doctor F16-33 is a useful tool, combining high cutting and piercing capabilities.The Plague Doctor pocket knife is 8.35" full lehgth. Knife has 3,4" black stonewash finish D2 tool steel blade and green G10 handle with a coarse texture ensuring a grip feeling. Also knife has an extended tang, lanyard hole and pocket clip with an additional left-hand clip.
66,13 €

In magazzino

Coltello da tasca Steel Will Intrigue 8.3cm F45M-17
Folding knife Steel Will Intrigue F45M-17 with Its elegant shapes and narrow blade fits for everyday using as an urban folder. Exquisite design and light weight make the knife insensible in your pocket.
Intrigue poсket knife is 7.5" full length. It has 3.25" satin finish D2 tool steel blade and blue textured FRN handle. Blue aluminum backspacer. Extended tang. Pocket clip.
41,12 €

In magazzino

Coltello da tasca Steel Will Arcturus Tan 9.5cm F55-06
Coltello pieghevole Steel Will Arcturus F55-06 con lama stonewash scura e impugnatura beige. Il modello prende il nome dalla stella più luminosa dell'emisfero settentrionale. La lama è lunga 9,5 cm, la lunghezza totale è di 22,6 cm. La lama è realizzata in acciaio D2. Impugnatura in G-10. Il coltello pieghevole Steel Will Arcturus è dotato di clip da tasca.
57,26 €

In magazzino

Sold out
Coltello da tasca Steel Will Resident Black 9.1cm F15-51
Folding knife Steel Will Resident F15-51 is elegant and stylish, It's a true gentleman’s knife. Featuring high tech options such as carbon fiber and titanium, as well as a more affordable version with a textured anodized aluminum handle, the Resident F15 knife’s looks can only be outdone by its performance.
Steel Will Resident F15-51 folding knife is 8.27" full length. It has 3.6" satin finish D2 tool steel drop point blade and black textured aluminum handle. Thumb stud. Pocket clip.
57,26 €

Sold out

Il rinomato marchio di coltelli Steel Will è stato fondato nel 2014 da SMG Inc (Sport Manufacturing Group Inc), un'importante azienda americana. Il lancio sul mercato del marchio è stato impressionante e notevole grazie alla varietà dei nuovi modelli introdotti. L'azienda sta ora ampliando costantemente la sua linea di prodotti e produce un'ampia gamma di coltelli per un'ampia gamma di applicazioni e compiti. Nella produzione vengono utilizzati vari gradi di acciaio, tra cui N690Co, D2 e ​​1095. Per i manici vengono utilizzati Micarta e fibra di vetro G10. Steel Will ha sede a New York City, negli Stati Uniti, e i suoi coltelli vengono prodotti in stabilimenti in diversi paesi: Stati Uniti, Italia, Taiwan e Cina. L'azienda sviluppa internamente tutti i modelli di coltelli, senza il coinvolgimento di designer di fama. La gamma di coltelli Steel Will può essere suddivisa in tre categorie: coltelli tattici, coltelli da esterno e coltelli da città.