Hay existencias
Los más vendidos
Hay 4380 products.
Folding knife Acta Non Verba A200 Black ANVA200-001 is here to perform over and over again. Thanks to its lightweight, yet durable construction made of G10, you'll almost forget that you have it. But when the time comes, the superb deep cryo treated blade made of Uddeholm Sleipner will get the job done. Being fully ambidextrous and super safe at all times A-lock makes the A200 perfect EDC for your everyday adventure.
133,87 €
Hay existencias
La navaja plegable Acta Non Verba A100 combina a la perfección las características clave de una navaja EDC. Sus cachas GRN con perfil 3D y contorno son muy ligeras, resistentes y cómodas de usar. La hoja de la A100 está fabricada en acero en polvo Magnacut, sometido a un profundo criotratamiento, lo que garantiza una excelente retención del filo, además de una excelente resistencia a la corrosión y durabilidad. El sistema de bloqueo A, apto para zurdos, protege todo el conjunto y garantiza un uso seguro y muy agradable. La A100 también está equipada con un espaciador trasero negro en contraste, que sirve tanto como reposamanos como punto de anclaje para el cordón.
167,74 €
Hay existencias
Tabla de cortar antibacteriana grande Tenryo Manaita. Adecuado para uso profesional y doméstico. Tamaño 600x300x20 mm. El material antibacteriano es inorgánico (sin efecto sobre el cuerpo humano), por lo que es excelente en términos de seguridad, resistencia al calor y durabilidad. Eficaz contra una amplia gama de bacterias (E. coli, estafilococos, salmonela, etc.). Puede ocurrir un cambio de color durante el uso, pero la eficacia no cambiará. Peso - 3,4 kg. Hecho en Japón.
127,42 €
Hay existencias
La tabla de cortar japonesa Tenryo Manaita está fabricada con material sintético antibacteriano de alta calidad. Medidas: 500 x 250 x 20 mm. El material antibacteriano es inorgánico (no afecta al cuerpo humano), por lo que ofrece una excelente seguridad, resistencia al calor y durabilidad. Es eficaz contra una amplia gama de bacterias (E. coli, estafilococos, salmonela, etc.). Puede decolorarse durante el uso, pero su eficacia no se verá afectada. Peso: 2,4 kg.
96,77 €
Hay existencias
Tabla de cortar japonesa Tenryo Manaita, fabricada en material sintético. Medidas: 600 x 300 x 20 mm. Fabricada con un polímero especial resistente a la humedad, la temperatura y los daños mecánicos. Esta tabla de cortar profesional cumple con todos los requisitos de una cocina de restaurante. Peso: 3,3 kg.
76,61 €
Hay existencias
Tabla de cortar sintética Tenryo Manaita. Medidas: 500 x 330 x 20 mm. Esta tabla combina alta resistencia, higiene y facilidad de uso. Adecuada para cocinas domésticas y uso profesional. Peso: 3 kg. Fabricada en Japón.
73,39 €
Hay existencias
La superficie antideslizante de esta tabla de cortar profesional Tenryo Manaita, grande y resistente, protege tus manos y permite una precisión excepcional. La tabla de cortar Hi-Soft está hecha de material sintético de alta calidad, especialmente diseñado para imitar el color y la textura de la madera. Medidas: 600 x 300 x 30 mm. Fabricada en Japón, el suave acetato de polivinilo reduce el impacto del cuchillo, minimizando la tensión en la mano y el impacto sobre el cuchillo, lo que resulta en una mejor retención del filo y una mayor vida útil de tus cuchillos. Material: High-Soft (acetato de polivinilo). Peso: 5,4 kg.
137,10 €
Hay existencias
Tabla de cortar japonesa Hi-Soft Tenryo Manaita. El tamaño 55x27x3 cm es adecuado para una cocina profesional. La tabla de cortar está hecha de material sintético de alta calidad que se asemeja a la madera en color y textura. El material de acetato de polivinilo suave reduce la carga de impacto del cuchillo, minimizando la carga en la mano y el impacto en el filo del cuchillo. Peso 4,5 kg.
125,00 €
Hay existencias
La tabla de cortar profesional Hi-Soft Tenryo Manaita está hecha de material sintético de alta calidad. El material se asemeja a la madera en color y textura, pero a diferencia de la madera, no absorbe olores, no se deforma y no requiere cuidados especiales. Tamaño 500x250x30 mm. Peso 3,8 kg.
111,29 €
Hay existencias
Japanese folder Kanekoma Higonokami VG-TR is designed for everyday use and will cope with any task assigned to it. The 7 cm blade is made of the famous Japanese VG-10 stainless steel. The titan rainbow handle is equipped with a lanyard hole. According to tradition, the knife does not have locking mechanisms, and the reliable fixation of the blade in the open state is ensured solely by the force of friction. Experience history personally with the Kanekoma Higonokami knife.
73,30 €
Hay existencias
Made in the best ancient Japanese traditions, the Kanekoma Higonokami is designed for everyday use and will cope with any task assigned to it. The 9,5 cm blade is made of the famous Japanese Aogami carbon steel. The brass handle is equipped with a lanyard hole. According to tradition, the knife does not have locking mechanisms, and the reliable fixation of the blade in the open state is ensured solely by the force of friction. Experience history personally with the Kanekoma Higonokami knife.
33,47 €
Hay existencias
Cuchillo nakiri japonés forjado a mano por Yoshimi Kato, artesano tradicional certificado en Takefu, prefectura de Fukui, Japón. Hoja VG-10 Níquel Damasco. Longitud de la hoja 165 mm. Mango - pakkawood rojo. Nakiri es un cuchillo de verduras. No intente cortar, golpear o picar productos congelados o huesos. La cuchilla puede astillarse o romperse. Lavar a mano con agua tibia y secar con una toalla.
225,80 €
Hay existencias
Folding knife We Knife Mini Buster 2003C has 8.7cm blade made of CPM 20 CV steel. If you need a robust folder for everyday carry or a combat scenario that will not let you down, you've just found it in the Mini Buster. This collaboration between WE Knives and Snecx Design Lab is one of the most exciting pieces of the year and we could spend all day heaping praise on this knife if we wanted. It is a production priced Snecx with the feeling and feature-set of a mid-tech knife. The trademark Snecx design aesthetic may not be for everyone but the design is a do-it-all and do-it-all-well kind of a knife whose utility functionality cannot be disregarded. Its traditional sheepsfoot blade is great for all sorts of cutting tasks apart from stabbing but it does have a reinforced tip if you tend to do most of your cutting concentrated on that area. The handle, honestly, couldn't be more ergonomic and we love the very straightforward, no-nonsense look of the overall design. You will not be disappointed with the Mini Buster, it's going to be a hard-use EDC knife we recommend for years to come.. The knife is 20,2cm open and 11,5cm closed.
298,39 €
Hay existencias
La daga suiza ya era utilizada como arma común por los piqueros suizos en los siglos XV y XVI y, debido a la longitud de su hoja, a menudo ocupaba una posición intermedia entre una daga y una espada. La daga, también conocida como baselard, servía principalmente como arma secundaria y, por lo general, no se entregaba como una pieza de equipo, sino que los soldados tenían que adquirirla en privado. La hoja de la daga, afilada por ambos lados y afilada en punta, ya tenía una sección transversal en forma de diamante en los modelos históricos, porque esta construcción demostró ser extremadamente estable y eficaz. El diseño del guardamanos y el pomo es característico de la daga suiza. La forma curva inusual se remonta a principios del siglo XIII y también se puede encontrar en la forma auténtica de la nueva edición, que elaboramos a mano. El reluciente mango oscuro hecho de ébano importado certificado y seleccionado a mano está enmarcado por el pomo altamente pulido y el protector de mano y forma una unidad perfecta con la hoja de acero inoxidable. La funda de cuero cosida a mano y decorada especialmente diseñada para este modelo subraya la exclusividad de esta codiciada pieza de colección. La entrega se realiza con un número de serie individual en una caja de madera noble y con un certificado de autenticidad. Hecho a mano en la fábrica de cuchillos Boker en Solingen y estrictamente limitado a 500 piezas en todo el mundo.
1.141,83 €
Shipping after 10-20 business days
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
For the Böker Sherman EDC 110665 blade, Magnacut was used for the first time, which is not without reason glorified as “wonder steel”. Unlike the tool steels usually used, this steel was developed specifically for knife making. The three desirable properties of a steel - edge retention, toughness and rust resistance (stainless in the DIN category) - represent a conflict of goals. To make the steel rust-resistant, the addition of chromium is necessary, which makes the structure coarse, brittle and susceptible to fracture under normal conditions. High hardness, which has a positive influence on cutting durability, is usually achieved at the expense of toughness. With Magnacut, despite the high chromium content of 10.7% and an impressive hardenability of over 62HRC, it has been possible to achieve a very fine microstructure and thus high toughness and shock-load tolerance. The addition of nitrogen plays a central role here. Nitrogen is actually a steel pest in the alloy. However, due to sophisticated heat treatment, among other things, the nitrogen of the Magnacut is integrated into the crystalline lattice structure of the steel structure and thus achieves the otherwise contradictory material properties.
The central structural difference to the M4 Damascus model is the flipper, elegantly integrated into the contours, which allows the blade to slide open smoothly with a small impulse and invites you to play. The ball-bearing blade is opened alternatively by thumb stud and locked by a sturdy titanium framelock with stonewash finish. An overdrive stop acts as an over-extension protection for the lock. The milled titanium clip (tip-up/r) with a steel ball as well as the handle scales made of wild carbon fibre complete the harmonious overall picture.
A special highlight of the Boker Sherman EDC is the protruding backspacer made of Damascus, which is equipped with a lanyard hole in elongated slotted design. The Damascus of the backspacer was forged from various materials from the production of M4 Sherman tanks by Chad Nichols in the Customized Ladder pattern and is reminiscent of the tank tracks left in the ground by the heavy chains of the M4 Sherman.
For the Böker Sherman EDC 110665 blade, Magnacut was used for the first time, which is not without reason glorified as “wonder steel”. Unlike the tool steels usually used, this steel was developed specifically for knife making. The three desirable properties of a steel - edge retention, toughness and rust resistance (stainless in the DIN category) - represent a conflict of goals. To make the steel rust-resistant, the addition of chromium is necessary, which makes the structure coarse, brittle and susceptible to fracture under normal conditions. High hardness, which has a positive influence on cutting durability, is usually achieved at the expense of toughness. With Magnacut, despite the high chromium content of 10.7% and an impressive hardenability of over 62HRC, it has been possible to achieve a very fine microstructure and thus high toughness and shock-load tolerance. The addition of nitrogen plays a central role here. Nitrogen is actually a steel pest in the alloy. However, due to sophisticated heat treatment, among other things, the nitrogen of the Magnacut is integrated into the crystalline lattice structure of the steel structure and thus achieves the otherwise contradictory material properties.
The central structural difference to the M4 Damascus model is the flipper, elegantly integrated into the contours, which allows the blade to slide open smoothly with a small impulse and invites you to play. The ball-bearing blade is opened alternatively by thumb stud and locked by a sturdy titanium framelock with stonewash finish. An overdrive stop acts as an over-extension protection for the lock. The milled titanium clip (tip-up/r) with a steel ball as well as the handle scales made of wild carbon fibre complete the harmonious overall picture.
A special highlight of the Boker Sherman EDC is the protruding backspacer made of Damascus, which is equipped with a lanyard hole in elongated slotted design. The Damascus of the backspacer was forged from various materials from the production of M4 Sherman tanks by Chad Nichols in the Customized Ladder pattern and is reminiscent of the tank tracks left in the ground by the heavy chains of the M4 Sherman.
241,13 €
Hay existencias
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
The folding knife Helle Kletten Kebony 662K is the sister knife of Kletten. Its robust construction with a back lock mechanism and scandi grind blade makes this a perfect companion for any adventure and has quickly become a staff favorite.
Kebony is actually not a type of wood, but rather an improvement of traditional, softer Northern wood. By adding furfuryl alcohol (based on waste biomass), the cell structure is altered in a secret process. The infusion locks the wood cells and strengthens the material by 50% in the process and stabilizes the wood.If sealed with oil and treated occasionally, the handle will remain dark. If untreated, it will turn grey and get an aged look.
This unique pocket knife takes its name from a small and rugged hill known as “Kletten” by the locals, situated near the Helle factory and overlooking the small village of Holmedal.
The short blade is made from Helle triple laminated stainless steel and has a classic Scandinavian grind..
The folding knife Helle Kletten Kebony 662K is the sister knife of Kletten. Its robust construction with a back lock mechanism and scandi grind blade makes this a perfect companion for any adventure and has quickly become a staff favorite.
Kebony is actually not a type of wood, but rather an improvement of traditional, softer Northern wood. By adding furfuryl alcohol (based on waste biomass), the cell structure is altered in a secret process. The infusion locks the wood cells and strengthens the material by 50% in the process and stabilizes the wood.If sealed with oil and treated occasionally, the handle will remain dark. If untreated, it will turn grey and get an aged look.
This unique pocket knife takes its name from a small and rugged hill known as “Kletten” by the locals, situated near the Helle factory and overlooking the small village of Holmedal.
The short blade is made from Helle triple laminated stainless steel and has a classic Scandinavian grind..
135,48 €
Hay existencias
The G. Sakai Ukimon Floral Textile GS11609 is a small, money clip knife. The handle is made of stainless steel with image. This image is done using a unique process involving raised printing and UV radiation. This technique is similar to screen printing is used to color the images. The result is finely textured renditions of famous Japanese works of art. The modified Drop Point blade is made of Damascus steel with VG-10 core. The model has a lanyard hole and pocket clip. The Ukimon is a tribute to Japanese craftsmanship, by traditional craftsmen.
95,97 €
Hay existencias
This Ukimon Blue Wave GS11606 features the “Kanagawa Okinamiura” meaning Under the Wave off Kanagawa, also known as The Great Wave or Blue Wave, from the series from a wood block print by renowned Japanese artist Katsushika Hokusai, part of his Thirty-six Views of Mount Fuji series, dating from 1830-1832. The handle is made of stainless steel. The modified Drop Point blade is made of Damascus steel with VG-10 core. The model has a lanyard hole and pocket clip. The Ukimon is a tribute to Japanese craftsmanship, by traditional craftsmen.
95,97 €
Hay existencias
The Ukimon G. Sakai Fish GS11168 is a small, money clip knife with a twist: the obverse scale of each Ukimon knife features a recreation of famous Ukiyo-e artistic prints. The handle is made of stainless steel. The modified Drop Point blade is made of VG-10 stainless steel with satin finish. The model has a lanyard hole and pocket clip. The Ukimon is a tribute to Japanese craftsmanship, by traditional craftsmen.
56,38 €
73,38 €
Hay existencias
The stylish G. Sakai Gentleman's Framelock GS11164 folding knife is made from quality materials in Japan. The red GS pattern handle is made of stainless steel. The blade is made of Damascus steel with VG-10 core. The model has a lanyard hole and pocket clip. Comes with black leather pouch.
121,61 €
151,61 €
Hay existencias
The Secure-Ex CSSK92DD black sheath for Delta with with neck chain. Sheath only, Delta sold separately.
10,28 €
Hay existencias
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
The Böker Magnum Army Rescue Bronze 01LL471 is fully functional and ready to use, but they have not been designed for the daily, demanding use of professional first responders. The bronze anodised aluminium handle always fits securely in the hand and is provided with a detailed army emblem. The equipment of this rescue knife offers a multitude of functions for any mission: glass-breaker, belt-cutter, pocket clip and a sturdy blade made of 440 stainless steel. Black coated partially serrated reverse tanto blade with flipper and assisted opener. The Böker Magnum Army Rescue Bronze 01LL471 knife weighs 139 g.
The Böker Magnum Army Rescue Bronze 01LL471 is fully functional and ready to use, but they have not been designed for the daily, demanding use of professional first responders. The bronze anodised aluminium handle always fits securely in the hand and is provided with a detailed army emblem. The equipment of this rescue knife offers a multitude of functions for any mission: glass-breaker, belt-cutter, pocket clip and a sturdy blade made of 440 stainless steel. Black coated partially serrated reverse tanto blade with flipper and assisted opener. The Böker Magnum Army Rescue Bronze 01LL471 knife weighs 139 g.
26,25 €
Shipping after 10-15 business days
Este Böker Bronco 121504 tiene una usabilidad óptima para todos los usuarios profesionales al aire libre, como bushcrafters, campcrafters, supervivientes, excursionistas, cazadores, equipos SAR y otros. La hoja universal de punta ancha con afilado de sable alto se ha fabricado con acero CPM al más alto nivel de posibilidades metalúrgicas. El mango que se adapta cómodamente a la mano incluso cuando se trabaja durante largos períodos de tiempo, encierra completamente la espiga y no disipa el calor de la mano cuando está fría. El modelo tiene una funda de cuero de alta calidad que se puede usar con o sin colgante, protege el cuchillo de pérdidas y daños, tiene un enchufe para un encendedor y está equipado con uno. Fabricación 100% en Solingen, Alemania.
137,06 €
Shipping after 10-20 business days