In magazzino
Più venduti
4380 prodotti.
Folding knife Acta Non Verba A200 Black ANVA200-001 is here to perform over and over again. Thanks to its lightweight, yet durable construction made of G10, you'll almost forget that you have it. But when the time comes, the superb deep cryo treated blade made of Uddeholm Sleipner will get the job done. Being fully ambidextrous and super safe at all times A-lock makes the A200 perfect EDC for your everyday adventure.
133,87 €
In magazzino
Folding knife Acta Non Verba A100 Red ANVA100-009 perfectly combines key EDC features together. Its 3D profiled and contoured GRN scales are both super light, durable and very comfortable to use. The Blade of A100 is made of deep cryo treated powder steel Magnacut, that gives it amazing edge retention while maintaining superb corrosion resistance and durability. Fully ambidextrous A-lock secures the whole assembly and ensures safe and very pleasant user experience. A100 also features contrasting black floating backspacer that both works as support for the hand as well as lanyard attachment point.
167,74 €
In magazzino
Tenryo Manaita Antibacterial large cutting board. Suitable for professional and home use. Size 600x300x20 mm. The antibacterial material is inorganic (does not affect the human body), so it is excellent in terms of safety, heat resistance and durability. Effective against a wide range of bacteria (E. coli, staphylococci, salmonella, etc.). During use, color change may occur, but the effectiveness will not change. Weight - 3.4 kg. Made in Japan.
127,42 €
In magazzino
Japanese cutting board Tenryo Manaita is made of high quality antibacterial synthetic material. Size 500x250x20 mm. The antibacterial material is inorganic (does not affect the human body), so it is excellent in terms of safety, heat resistance and durability. Effective against a wide range of bacteria with virtually no selectivity towards bacteria. (E. coli, staphylococci, salmonella, parahemolytic vibrio, etc.) Discoloration may occur during use, but the effectiveness will not change. Weight-2,4 kg.
96,77 €
In magazzino
Japanese cutting board Tenryo Manaita made of synthetic material. Size 600x300x20 mm. It is made of a special polymer that is resistant to moisture, temperature and mechanical damage. This professional cutting board meets all the requirements of a restaurant kitchen. Weight is 3,3 kg.
76,61 €
In magazzino
The synthetic cutting board Tenryo Manaita. Size 500x330x20 mm. This board combines high strength, hygiene and ease of use. Suitable for home kitchens and professional use. Weight is 3 kg. Made in Japan.
73,39 €
In magazzino
The non-slip surface of this large and heavy professional cutting board Tenryo Manaita keeps your hands safe while allowing for precision and accuracy. The Hi-Soft Cutting board features high quality synthetic material that is specially designed to resemble the color and texture of wood. Size 600x300x30 mm. Made in Japan, the soft polyvinyl acetate material reduces the impact of the knife, minimizing stress to the hand and impact on the knife, resulting in better edge retention and a longer lifespan for your knives. Material: High-Soft (polyvinyl acetate). Weight-5,4 kg.
137,10 €
In magazzino
Japanese cutting board Hi-Soft Tenryo Manaita. Size 55x27x3 cm is suitable for a professional kitchen. The cutting board is made of high-quality synthetic material, which resembles wood in color and texture. Soft polyvinyl acetate material reduces the impact load of the knife, minimizing the load on the hand and the impact on the cutting edge of the knife. Weight 4.5 kg.
125,00 €
In magazzino
The professional cutting board Hi-Soft Tenryo Manaita is made of high-quality synthetic material. The color and texture of the material resembles wood, but unlike it, it does not absorb odors, does not deform and does not require special care. Size 500x250x30 mm. Weight 3.8 kg.
111,29 €
In magazzino
Japanese folder Kanekoma Higonokami VG-TR is designed for everyday use and will cope with any task assigned to it. The 7 cm blade is made of the famous Japanese VG-10 stainless steel. The titan rainbow handle is equipped with a lanyard hole. According to tradition, the knife does not have locking mechanisms, and the reliable fixation of the blade in the open state is ensured solely by the force of friction. Experience history personally with the Kanekoma Higonokami knife.
73,30 €
In magazzino
Made in the best ancient Japanese traditions, the Kanekoma Higonokami BA-LL is designed for everyday use and will cope with any task assigned to it. The 95 mm blade is made of the famous Japanese Aogami carbon steel. The brass handle is equipped with a lanyard hole. According to tradition, the knife does not have locking mechanisms, and the reliable fixation of the blade in the open state is ensured solely by the force of friction. Experience history personally with the Kanekoma Higonokami knife.
33,47 €
In magazzino
Coltello giapponese nakiri forgiato a mano da Yoshimi Kato, artigiano tradizionale certificato di Takefu, prefettura di Fukui, in Giappone. Lama in damasco nichelato VG-10. Lunghezza lama 165 mm. Manico in legno di pakka rosso. Il nakiri è un coltello per verdure. Non tentare di tagliare, colpire o tritare prodotti congelati o ossa. La lama potrebbe scheggiarsi o rompersi. Lavare a mano con acqua tiepida e asciugare con un panno.
225,80 €
In magazzino
Folding knife We Knife Mini Buster 2003C has 8.7cm blade made of CPM 20 CV steel. If you need a robust folder for everyday carry or a combat scenario that will not let you down, you've just found it in the Mini Buster. This collaboration between WE Knives and Snecx Design Lab is one of the most exciting pieces of the year and we could spend all day heaping praise on this knife if we wanted. It is a production priced Snecx with the feeling and feature-set of a mid-tech knife. The trademark Snecx design aesthetic may not be for everyone but the design is a do-it-all and do-it-all-well kind of a knife whose utility functionality cannot be disregarded. Its traditional sheepsfoot blade is great for all sorts of cutting tasks apart from stabbing but it does have a reinforced tip if you tend to do most of your cutting concentrated on that area. The handle, honestly, couldn't be more ergonomic and we love the very straightforward, no-nonsense look of the overall design. You will not be disappointed with the Mini Buster, it's going to be a hard-use EDC knife we recommend for years to come.. The knife is 20,2cm open and 11,5cm closed.
298,39 €
In magazzino
The extraordinary Twisted Damascus is now followed by the Mosaic Damascus, which is also very complex to manufacture. It is one of the royal class of Damascus forging and makes the impressive dagger an absolute highlight in every knife collection. In contrast to conventional Damascus, no layers are produced in the manufacture of Mosaic Damascus. Instead, complex Damascus bars are forged by hand into a mosaic in an elaborate and very complicated process. To do this, the Damascus package, which initially consists of stacked layers, is cut up and reassembled in a staggered manner to create a unique mosaic pattern at the end faces of the bar. The Damascus is then cut up again and the complex process is repeated several times, the resulting pattern becoming finer and more unique with each step. Finally, the individual packages are stacked and forged in the shape of a square so that the ends of the individual pieces form a new surface. Forging temperature, forming, deformation rate and the previous steps must be optimally coordinated. This extremely demanding forging process, which only few Damascus smiths master, is carried out to perfection for our Swiss dagger by Chad Nichols. The dagger blade, sharpened and pointed on both sides, already had a diamond-shaped cross-section in historical models, because this construction proved to be extremely stable and effective. Characteristic of the Swiss Dagger is the design of the pommel and the crossguard. The unusual, curved design can be traced back to the early 13th century and can also be found in the authentic design of our hand-made edition. The shimmering dark handle made of hand-picked certified imported Ebony is bordered by the highly polished pommel and the crossguard and forms a perfect unit with the fine blade. The leather sheath, specially designed and handsewn for this model, underlines the exclusivity of this coveted collector‘s item. It is delivered with an individual serial number in a noble wooden box and with a certificate of authenticity. Handmade in the Boker Knife Manufactory Solingen and strictly limited to 500 pieces worldwide.
1.141,83 €
Spedizione dopo 10-20 giorni lavorativi
For the Böker Sherman EDC 110665 blade, Magnacut was used for the first time, which is not without reason glorified as “wonder steel”. Unlike the tool steels usually used, this steel was developed specifically for knife making. The three desirable properties of a steel - edge retention, toughness and rust resistance (stainless in the DIN category) - represent a conflict of goals. To make the steel rust-resistant, the addition of chromium is necessary, which makes the structure coarse, brittle and susceptible to fracture under normal conditions. High hardness, which has a positive influence on cutting durability, is usually achieved at the expense of toughness. With Magnacut, despite the high chromium content of 10.7% and an impressive hardenability of over 62HRC, it has been possible to achieve a very fine microstructure and thus high toughness and shock-load tolerance. The addition of nitrogen plays a central role here. Nitrogen is actually a steel pest in the alloy. However, due to sophisticated heat treatment, among other things, the nitrogen of the Magnacut is integrated into the crystalline lattice structure of the steel structure and thus achieves the otherwise contradictory material properties.
The central structural difference to the M4 Damascus model is the flipper, elegantly integrated into the contours, which allows the blade to slide open smoothly with a small impulse and invites you to play. The ball-bearing blade is opened alternatively by thumb stud and locked by a sturdy titanium framelock with stonewash finish. An overdrive stop acts as an over-extension protection for the lock. The milled titanium clip (tip-up/r) with a steel ball as well as the handle scales made of wild carbon fibre complete the harmonious overall picture.
A special highlight of the Boker Sherman EDC is the protruding backspacer made of Damascus, which is equipped with a lanyard hole in elongated slotted design. The Damascus of the backspacer was forged from various materials from the production of M4 Sherman tanks by Chad Nichols in the Customized Ladder pattern and is reminiscent of the tank tracks left in the ground by the heavy chains of the M4 Sherman.
The central structural difference to the M4 Damascus model is the flipper, elegantly integrated into the contours, which allows the blade to slide open smoothly with a small impulse and invites you to play. The ball-bearing blade is opened alternatively by thumb stud and locked by a sturdy titanium framelock with stonewash finish. An overdrive stop acts as an over-extension protection for the lock. The milled titanium clip (tip-up/r) with a steel ball as well as the handle scales made of wild carbon fibre complete the harmonious overall picture.
A special highlight of the Boker Sherman EDC is the protruding backspacer made of Damascus, which is equipped with a lanyard hole in elongated slotted design. The Damascus of the backspacer was forged from various materials from the production of M4 Sherman tanks by Chad Nichols in the Customized Ladder pattern and is reminiscent of the tank tracks left in the ground by the heavy chains of the M4 Sherman.
241,13 €
In magazzino
The folding knife Helle Kletten Kebony 662K is the sister knife of Kletten. Its robust construction with a back lock mechanism and scandi grind blade makes this a perfect companion for any adventure and has quickly become a staff favorite.
Kebony is actually not a type of wood, but rather an improvement of traditional, softer Northern wood. By adding furfuryl alcohol (based on waste biomass), the cell structure is altered in a secret process. The infusion locks the wood cells and strengthens the material by 50% in the process and stabilizes the wood.If sealed with oil and treated occasionally, the handle will remain dark. If untreated, it will turn grey and get an aged look.
This unique pocket knife takes its name from a small and rugged hill known as “Kletten” by the locals, situated near the Helle factory and overlooking the small village of Holmedal.
The short blade is made from Helle triple laminated stainless steel and has a classic Scandinavian grind.
Kebony is actually not a type of wood, but rather an improvement of traditional, softer Northern wood. By adding furfuryl alcohol (based on waste biomass), the cell structure is altered in a secret process. The infusion locks the wood cells and strengthens the material by 50% in the process and stabilizes the wood.If sealed with oil and treated occasionally, the handle will remain dark. If untreated, it will turn grey and get an aged look.
This unique pocket knife takes its name from a small and rugged hill known as “Kletten” by the locals, situated near the Helle factory and overlooking the small village of Holmedal.
The short blade is made from Helle triple laminated stainless steel and has a classic Scandinavian grind.
135,48 €
In magazzino
The G. Sakai Ukimon Floral Textile GS11609 is a small, money clip knife. The handle is made of stainless steel with image. This image is done using a unique process involving raised printing and UV radiation. This technique is similar to screen printing is used to color the images. The result is finely textured renditions of famous Japanese works of art. The modified Drop Point blade is made of Damascus steel with VG-10 core. The model has a lanyard hole and pocket clip. The Ukimon is a tribute to Japanese craftsmanship, by traditional craftsmen.
95,97 €
In magazzino
This Ukimon Blue Wave GS11606 features the “Kanagawa Okinamiura” meaning Under the Wave off Kanagawa, also known as The Great Wave or Blue Wave, from the series from a wood block print by renowned Japanese artist Katsushika Hokusai, part of his Thirty-six Views of Mount Fuji series, dating from 1830-1832. The handle is made of stainless steel. The modified Drop Point blade is made of Damascus steel with VG-10 core. The model has a lanyard hole and pocket clip. The Ukimon is a tribute to Japanese craftsmanship, by traditional craftsmen.
95,97 €
In magazzino
The G. Sakai Fish GS11168 is a small, money clip knife with a twist: the obverse scale of each Ukimon knife features a recreation of famous Ukiyo-e artistic prints. The handle is made of stainless steel. The modified Drop Point blade is made of VG-10 stainless steel with satin finish. The model has a lanyard hole and pocket clip. The Ukimon is a tribute to Japanese craftsmanship, by traditional craftsmen.
56,38 €
73,38 €
In magazzino
The stylish G. Sakai Gentleman's Framelock GS11164 folding knife is made from quality materials in Japan. The red GS pattern handle is made of stainless steel. The blade is made of Damascus steel with VG-10 core. The model has a lanyard hole and pocket clip. Comes with black leather pouch.
121,61 €
151,61 €
In magazzino
La funda negra Secure-Ex CSSK92DD para Delta con cadena para el cuello. Solo funda, Delta se vende por separado.
10,28 €
In magazzino
The Böker Magnum Army Rescue Bronze 01LL471 is fully functional and ready to use, but they have not been designed for the daily, demanding use of professional first responders. The bronze anodised aluminium handle always fits securely in the hand and is provided with a detailed army emblem. The equipment of this rescue knife offers a multitude of functions for any mission: glass-breaker, belt-cutter, pocket clip and a sturdy blade made of 440 stainless steel. Black coated partially serrated reverse tanto blade with flipper and assisted opener. The Böker Magnum Army Rescue Bronze 01LL471 knife weighs 139 g.
26,25 €
Spedizione dopo 10-15 giorni lavorativi
This Böker Bronco 121504 is optimal usability for all professional outdoor users such as bushcrafters, campcrafters, survivalists, cross-country hikers, hunters, SAR teams and others. The universal wide drop-point blade with a high-set saber grind has made of CPM steel at the highest level of metallurgical possibilities. The handle that fits comfortably in the hand even when working for long periods of time, completely encloses the tang throughout and does not dissipate heat from the hand when cold. The model has a high quality leather sheath that can be worn with or without a dangler, protects the knife from loss and damage, has a socket for a firestarter and is fitted with one. 100% manufacturing in Solingen, Germany.
137,06 €
Spedizione dopo 10-20 giorni lavorativi