Meilleures ventes

Filtrer
Catégories
Prix
Fabricants
Filtrer
Sold out
Sujihiki Couteau de cuisine Nakagawa Satoshi Ginsan 27cm NG-GS270
Sujihiki forgée à la main par Nakagawa Satoshi. La longueur de la lame est de 27 cm. La lame du couteau sujihiki est en acier ginzan silver 3. L'acier Ginsan est également connu sous le nom de Ginsanko, ou Argent-3 a d'excellentes propriétés inoxydables. Il s'agit d'un acier au carbone inoxydable, avec 14% de chrome ajouté. Ginsan a une dureté similaire à Shirogami # 2 et presque la même rétention des bords. Le manche est en bois de wenge. La hauteur de la lame est d'environ 34,5 mm. Ce couteau ne doit pas être lavé au lave-vaisselle. Les couteaux de cuisine japonais ont une lame très dure mais fine. Il n'est pas permis de couper par des couteaux de chef japonais des os et de la viande avec des os, des noix de coco ou d'autres produits durs.
334,68 €

Sold out

Sold out
Gyuto Couteau de cuisine Nakagawa Satoshi Ginsan 24cm NS-GG240
Couteau Gyuto forgé à la main par Nakagawa Satoshi. La lame du couteau de chef gyuto est en acier ginzan silver 3. L'acier Ginsan est également connu sous le nom de Ginsanko, ou Argent-3 a d'excellentes propriétés inoxydables. Il s'agit d'un acier au carbone inoxydable, avec 14% de chrome ajouté. Ginsan a une dureté similaire à Shirogami # 2 et presque la même rétention des bords. Ce couteau de chef japonais fait à la main a la belle poignée en bouleau stabilisé et traité thermiquement avec entretoise blanche. La hauteur de la lame est d'environ 50 mm. Ce couteau ne doit pas être lavé au lave-vaisselle. Les couteaux de cuisine japonais ont une lame très dure mais fine. Il n'est pas permis de couper par des couteaux de chef japonais des os et de la viande avec des os, des noix de coco ou d'autres produits durs.
330,65 €

Sold out

Sold out
Lame Nakagawa Satoshi Ginsan Kiritsuke 21cm NG-BGKG210
Lame japonaise forgée à la main, maître Nakagawa Satoshi. La lame est en acier ginsan silver-3. 3 couches. L'acier Ginsan est également connu sous le nom de Ginsanko, ou Argent-3 a d'excellentes propriétés inoxydables. Il s'agit d'un acier au carbone inoxydable, avec 14% de chrome ajouté. Ginsan a une dureté similaire à Shirogami # 2 et presque la même rétention des bords. La hauteur de la lame est d'environ 42 mm (peut avoir de petites différences dues à la main).
273,39 €

Sold out

Sold out
Paracorde Atwood Rope Tactical Urban RG1156
Atwood Rope Tactical Urban RG1156 est un cordon solide de 3/32" (2,28 mm) de fabrication américaine éprouvé pour une variété d'usages. Longueur (100 pieds) 30,48 m. La force de rupture est de 124 kg (275 lb). Inhibé par les UV. Pourriture et résistant à la moisissure. La conception offre une très faible élasticité. Il peut être utilisé comme produit fini dans le tourisme et diverses solutions domestiques. Noyau intérieur en nylon à 4 brins. Fabriqué aux États-Unis. La couleur peut varier en fonction du lot de teinture. Il peut être utilisé pour créer des bracelets tressés, des cordons, des ceintures et est également utilisé comme produit fini dans le tourisme et diverses solutions ménagères.
Il est important de noter que ce type de paracorde n'est pas destiné à être utilisé en alpinisme - ses caractéristiques ne répondent pas aux exigences des cordes d'escalade, son utilisation à ces fins est donc fortement déconseillée !
5,64 €

Sold out

Sold out
Paracorde Atwood Rope ARM Battle Noire RG1123H
Atwood Rope Battle Noire RG1123H, un cordon de 5,6 mm de fabrication américaine très durable et solide, éprouvé pour une variété d'usages. Longueur (100 pieds) 30,48 m. Testez 350 lb (158 kg) par noyau. La force de rupture est de 1 106 kg (test de 2 650 lb). Résistant aux UV. Les couleurs ne déteignent pas et ne déteignent pas. La conception offre une très faible élasticité. Il peut être utilisé comme produit fini dans le tourisme et diverses solutions ménagères. Noyau intérieur en nylon à 7 brins. Fabriqué aux Etats-Unis. La couleur peut varier selon le lot de teinture.
It is important to note that this type of paracord is not intended for use in mountaineering - its characteristics do not meet the requirements for climbing ropes, so its use for these purposes is strongly discouraged!
16,12 €

Sold out

Sold out
Kiritsuke Couteau de cuisine Nakagawa Satoshi 21cm NS-GKG210
Couteau Kiritsuke gyuto forgé à la main par Nakagawa Satoshi. Il s'agit d'un hybride japonais d'un couteau de chef et d'une trancheuse. La lame du couteau kiritsuke est en acier ginsan silver 3. L'acier Ginsan est également connu sous le nom de Ginsanko, ou Argent-3 a d'excellentes propriétés inoxydables. Il s'agit d'un acier au carbone inoxydable, avec 14% de chrome ajouté. Ginsan a une dureté similaire à Shirogami # 2 et presque la même rétention des bords. Manche traditionnel en bois d'ébène japonais. La hauteur de la lame est de 42,3 mm. Ce couteau ne doit pas être lavé au lave-vaisselle. Les couteaux de cuisine japonais ont une lame très dure mais fine. Vous ne pouvez pas couper les OS, les noix et autres aliments trop durs.
297,58 €

Sold out

Sold out
Couteau à lame fix Mac Coltellerie Outdoor 16.5cm 631B
Le couteau de survie Outdoor Noire 631B de Mac Coltellerie est très tranchant, durable, fiable et idéal pour une variété de tâches. La lame est en acier Nitro V avec une revêtement en oxyde noir. Le modèle a une poignée en caoutchouc texturé noir. Trou pour cordon. Queue pleine et allongée. Comprend un étui de ceinture synthétique noir.
66,94 €

Sold out

Sold out
Paring Couteau de cuisine Zwilling J.A.Henckels Bob Kramer Euro Stainless Damask 10cm 34890-101-0
Zwilling Bob Kramer paring knife 10 cm from the series Euro Stainless Damask is ideal for cutting, cleaning and peeling fruit and vegetables. The blade has beautiful unique Damask patterning and a hard core of SG2 powder steel enclosed within 100 layers of two different steels. CRYODUR® ice-hardened blades are particularly cut-resistant, corrosion-resistant and have the best blade flexibility.The non-slip handle with ergonomic shape for comfortable cutting is made of micarta (multilayer material made of linen and synthetic resin), with stainless steel rivets and decorative logo pin. The handl is particularly dimensionally stable and moisture-resistant.It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.Zwilling Bob Kramer paring knife is made in Japan.
172,58 €

Sold out

Sold out
Couteau pliant Böker Plus Collection 2023 8.7cm 01BO2023
Equipped with a ball-bearing spearpoint blade made of MagnaCut and a handle and all screws made of titanium, the dynamic Böker Plus Collection 2023 01BO2023 puts some serious horsepower on the road. The collector's knife, which is strictly limited to 400 pieces worldwide. The powder metallurgical steel was specially developed for knife blades and combines the essential requirements of high edge retention, toughness and rust resistance. The noble satin finish on the blade, which is opened with the removable thumb stud, provides the necessary understatement. The CNC-milled titanium handle offers many facets, which reliably secures the blade thanks to the solid framelock with an integrated stainless-steel inlay and overtravel stop. The suggestive bolster in the first third of the front handle is smooth, while the main part has a crosshair-like texture; secure grip and unique look included. The design language is rounded off by the ribbed backspacer, which promises a firm grip and consistently continues the Sal Manero design concept. The visual highlight is the dazzling ring with Damascus-like patterning made of the titanium alloy Ti-Mascus, which surrounds the blade axle screw and is additionally accentuated by the blue anodised screws on the handle and titanium clip (tip-up/r). The Boker Plus Collection 2023 is delivered with a high-quality felt pouch for storage and a certificate of authenticity.
361,29 €

Sold out

Sold out
Couteau pliant Böker Plus Karakurt All Black 7.8cm 01BO365
The Böker Plus Karakurt All Black  01BO365 knife by Jesper Voxnaes. Whether the European Black Widow has been a source of inspiration for the Boker Plus Karakurt remains the secret of Danish knifemaker Jesper Voxnaes. However, there are numerous indications that point to the black poisonous spider. The biting Clippoint blade 78 mm made of 154CM with with black Ceracote coating acts from the ambush and snaps shut mercilessly immediately after pressing the push button. The high-quality stainless steel is convincing with a hardness of 58 to 59 HRC. Preferred 'prey' includes the diverse cutting tasks of everyday life, which the pocket knife easily 'catches' because of its irresistible features. The handle made of anodised 6061-T6 aluminium is ergonomically shaped and sits securely in the hand, even for difficult tasks. The wave-shaped serrations on the underside promise additional grip. The knife also irritates its 'prey' with a convertible clip (tip-up/l-r) and a practical lanyard hole. Developed in collaboration with the switchblade specialist Hogue, the Karakurt is made in the USA and impresses with perfect workmanship. With high-quality nylon case for storage. Weight 95 g.
132,98 €

Sold out

Sold out
Couteau pliant Böker Barlow Copper Integral Micarta 6.6cm 110054
The compact knife Böker Barlow Copper Integral Micarta 110054 is an absolutely pocket-friendly companion, but is also large enough to handle most everyday cutting tasks with ease. The handy Böker Barlow, with its extra-long bolsters and wide blade, is a true milestone in the model history of the Böker Manufactory. This integral version of the timeless classic is provided with handles made of copper, which are milled from the solid and also form the characteristic bolsters of the Barlow. Thanks to the likewise contoured handle scales made of black burlap micarta, the exceptional gentleman's knife is extremely comfortable in the hand. The slipjoint blade, with a robust acid-wash finish, is made of ice-hardened N690 and opens with a nail nick.  Supplied with a high-quality felt case for storage. Handmade in the Böker Knife Manufactory in Solingen.
63,71 €

Sold out

Sold out
Lame Sukenari HAP40 S/S Clad 27cm S-3N9
Blade Sukenari HAP40 S/S Clad S-3N9 for Kiritsuke knife. Total length is 410 mm. The blade length 270 mm. Manufactured from three layers of steel (San Mai technique) with a cobalt alloyed HAP40 powder steel core with stainless steel clads. Not allowed to wash by dishwasher. It is not allowed to cut by Japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. Weight is 350 g.
290,32 €

Sold out

Sold out
Santoku Couteau de cuisine Yu Kurosaki Fujin R2 Oak 16.5cm ZRF-165SAONWQ
Santoku of special Fujin SG2 series by Yu Kurosaki. A functionally and aesthetically stunning Japanese knife. The octagonal handle is made this time of oak with a ring of natural turquoise. The blade with the unique Tsuchime forged pattern is crafted from three layers of SG2 stainless steel. In the manufacture of this series, Kurosaki was inspired by Fujin (Fujin) - the Shinto god of the wind, which can be seen in the forged pattern.
266,13 €

Sold out

Sold out
Lame Sukenari ZDP-189 27cm S-3N4
Blade 27 cm Sukenari HAP40 S/S Clad S-3N4 for Gyuto knife. Manufactured from three layers of steel (San Mai technique) with a cobalt alloyed HAP40 powder steel core with stainless steel clad. Total length is 410 mm. Stainless steel clads. Not allowed to wash by dishwasher. It is not allowed to cut by Japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. Weight is 350 g.
290,32 €

Sold out

Sold out
Gyuto Couteau de cuisine Ittetsu VG-10 Damascus 21cm IWZ-104
An excellent knife Gyuto IWZ-104 from Ittetsu with a blade length of 21 cm for chopping and slicing fish, meat, vegetables and fruits. The blade is made of high quality VG10 Damascus steel, hammer finish. The octagonal handle is made of pakkawood wood. This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 250 gr.
129,03 €

Sold out

Sold out
Couteau pliant Böker Plus Bill N Ted Operation 7.4cm 01BO629
Knife designer Keanu Alfaro offers the Böker Plus Bill N Ted Operation 01BO629 pocket knife for everyday use. The handle is made of aluminum and G10. The D2 steel Drop Point blade is a durable blade ideal for everyday use. The blade is brought into the desired position via a thumb pin and locks there via a proven liner lock. Versatile wearing options are offered with a pocket clip (tip-up/r). Weight 129 g.
55,60 €

Sold out

Sold out
Couteau à lame fix Sheffield Knives Green River 12.4cm SHE012
The J. Adams Sheffield England Green River SHE012 knife is 22.8 cm long. The carbon steel blade is 12.4 cm long. The handle is made of wood. Comes with a black leather belt sheath. 
31,45 €

Sold out

Sold out
Couteau pliant Roper Knife and Tin Combo AB051S1Y
The Roper Knife and Tin Combo is a set of 2 knives with satin-finish stainless steel blades. The handle is made of yellow Delrin. The model has a bolster(s) made of stainless steel. Inlay shield. Includes knife 3.5", 8,89cm closed with drop point blade; and knife 3.5" , 8,89 cm closed stockman with clip, sheepsfoot, and spey blades. Comes with Roper knives tin.
26,61 €

Sold out

Sold out
Couteau pliant Spartan blades Astor CF/G10 9.2cm SFBL8CF
The ASTOR is first folding knife created in collaboration of Spartan Blades with prolific knife maker Les George. 4.75" (12.07cm) closed. 3.75" (9.53cm) stonewash finish CTS-XHP stainless blade. Lanyard hole. Pocket clip. Thumb stud. Black G10 and carbon fiber handle.
108,06 €

Sold out

Sold out
Couteau pliant Sniper Bladeworks DMF 2020 9.2cm SBDMFODGS
This Sniper Bladeworks DMF comes is 4.75" (12.07cm) closed. 3.63" (9.22cm) satin finish S35VN stainless blade. OD green and gold G10 handle. Thumb stud. Lanyard hole. Pocket clip
402,42 €

Sold out

Sold out
Couteau pliant Spartan blades Harsey Fighter 7.6cm SFBL9BK
The Shoto folding knife from company Spartan Blade is a 5.25" (13.34cm) closed. Designed by Tu Lam from Ronin Tactics. 3" (7.62cm) black stonewash finish CTS-XHP stainless blade. Black textured G10 handle. Finger ring. Extended tang. Pocket clip.
133,87 €

Sold out

Sold out
Couteau à lame fix Sheffield Knives Commando 17.8cm SHE007
Sheffield Commando Dagger is 12" overall. 7" mirror finish carbon steel dagger blade. Black knurled metal alloy handle. Metal alloy guard and pommel. Sykes Fairbairn Pattern. Black leather sheath. Bulk packed.Made in Sheffield, England.
96,77 €

Sold out

Sold out
Couteau à lame fix Spartan blades George Raider 17.7cm SBBL3BK
Spartan Blades George Raider Dagger is 12" (30.48cm) overall. 7" (17.78cm) black powder coated SK5 carbon steel dagger blade. Black nylon handle. Full tang. Black plastic belt sheath. Boxed.
144,35 €

Sold out

Sold out
Couteau à lame fix Extrema Ratio Suppressor Trentennale GIS 17.6cm 04.1000.0312/BLK-30
Suppressor Trentennale from Extrema Ratio is the memorial dagger, issued to commemorate the thirtieth anniversary of the unit G.I.S., the renowned counter-terrorism unit of the Carabinieri (Italian military police). Suppressor Trentennale GIS is a commemorative limited and numbered series of 1000 daggers, bearing both historical and current unit logos. Comes in a hand-polished, clear plexiglass display case. Blade 176 mm (6,9 in), Böhler N690 steel. Weight 302 g (10.7 oz)
631,45 €

Sold out