Offerte

Filtra per
Categorie
Prezzo
Produttori
Filtro
-15% Sold out
Gyuto (coltello da chef) Coltello da cucina Miyabi 5000MCD 24cm 34373-241-0
Zwilling Miyabi 5000MCD Gyutoh, 24cm chef's knife is perfect for cutting or slicing through meat or fish. Its slim yet stable blade delivers a perfectly controlled and clean cut. It has an authentic Japanese profile with an extremely sharp Honbazuke honing and is symmetrically polished at an angle of 19 degrees. The blade is first sharpened twice on rotating stones and is then polished on a leather wheel. The gyutoh's handle is made of Masur birch to give each knife a unique wood-grain pattern. An end cap and subtly styled mosaic pin complete the knife's elegant look. The handle is D-shaped to give the knife perfect balance and control for effortless and precision cutting. The blade has beautiful Damask patterning and a hard core of MicroCarbide MC63 powder steel enclosed within 100 layers of two different steels. The CRYODUR® blade is ice-hardened at -196 degrees Celsius to achieve a hardness rating of around 63 Rockwell that keeps the blade sharp and flexible. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Zwilling Miyabi 5000MCD Gyutoh chef's knife made in Japan. There are only best kitchen knives in MyGoodKnife’s range.
314,64 €
370,16 €

Sold out

-15% Sold out
Santoku Coltello da cucina Kenshiro Hatono Red lacquer 16.5cm HRS
Santoku knife handmade by Kenshiro Hatono. Blade 165 mm made od damascus steel with VG10 core. Traditional handle made of red lacquer. Kenshiro Hatono is a knife maker from Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
142,58 €
167,74 €

Sold out

-15% Sold out
Santoku Coltello da cucina Kenshiro Hatono Black lacquer 16.5cm HBS
Japanese santoku knife handmade by Kenshiro Hatono. Blade 165 mm made od damascus steel with VG10 core. Black lacquer handle. Kenshiro Hatono is a knife maker from Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
142,58 €
167,74 €

Sold out

-15% Sold out
Gyuto (coltello da chef) Coltello da cucina TOJIRO Atelier 21cm TA-CH210
Gyuto japanese knife Tojiro Forged with 210 mm damascus balde. The gyuto is a Japanese designed chef’s knife. New series from Tojiro are hand forged by masters of Tojiro Atelier. This chef knife has classic kitchen knife's handle made of reinforced laminated material. Unique damascus blade with black finish. Tojiro knives of this exclusive series are forged by hands, using same method as japanese swords traditionally were made.
301,61 €
354,84 €

Sold out

-15% Sold out
Nakiri Coltello da cucina TOJIRO Atelier 16.5cm TA-VE165
Special japanese Nakiri knife Tojiro Forged with 165 mm balde. A nakiri knife, also known as a nakiri bocho, is a Japanese-style knife used for chopping vegetables. New exclusive series from Tojiro are hand forged by masters of Tojiro Atelier. This nakiri knife has classic kitchen knife's handle made of reinforced laminated material. Unique damascus blade with black finish. Tojiro knives of this exclusive series are forged by hands, using same method as japanese swords traditionally were made.
268,71 €
316,13 €

Sold out

-15% Sold out
Santoku Coltello da cucina TOJIRO Shippu Special 16.5cm
New! Limited edition of Tojiro Shippu series. Santoku with 165 mm blade. Unlike usual Shippu series knives, this has 95 layered Damascus Steel blade with a VG-10 core. Oak wood handle. This Shippu Special Santoku has buffalo horn bolster.
122,70 €
144,35 €

Sold out

-15% Sold out
Gyuto (coltello da chef) Coltello da cucina Mcusta Zanmai Classic Pro Zebra 21cm HFZ-8005D
Mcusta Zanmai Classic Pro Zebra Gyuto knife. Blade lenght is 21 cm. Gyuto is a chef knife. The blade of Mcusta Zanmai Classic Pro Zebra gyuto knife is made of of Damascus steel (VG-10), 33 layers. The handle is pakka wood with mosaic pin. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives at our stores are original and made is Seki city, Japan.Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
164,52 €
193,55 €

Sold out

-15% Sold out
Coltello da cucina Mcusta Zanmai Classic Pro Zebra Petty 9cm HFZ-8000D
Mcusta Zanmai Classic Pro Zebra paring knife. Blade lenght is 9 cm. The blade of Mcusta Zanmai Classic Pro Zebra Paring knife is made of of Damascus steel (VG-10), 33 layers. The handle is made of pakka wood with mosaic pin. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives at our stores are original and made is Seki city, Japan.Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
102,14 €
120,16 €

Sold out

-15% Sold out
Coltello da cucina Mcusta Zanmai Classic Damascus Petty 15cm HKC-3002D
Mcusta Zanmai Classic Petty utility knife. Blade lenght is 15 cm. The blade of Mcusta Zanmai Classic Petty knife is coated with 33 layers of Damascus steel and has a VG-10 core. The handle is made from Corian, a composite material that consists of 2/3 natural minerals and 1/3 acrylic with pigment.
102,14 €
120,16 €

Sold out

-15% Sold out
Coltello da cucina Mcusta Zanmai Coreless Aranami Petty 15cm ZUA-1002C
Mcusta Zanmai  “coreless steel” series Petty knife with 15 cm blade. VG-10 and VG-2 are laminated together like Damascus steel. Literally there is no core of the steel, that's why this Mcusta kitchen knife series called "coreless". Also the blade patterns are remarkably clearer than on Damascus steel. Mcusta use  “ocean wave” motif which came from a traditional Japanese painting. Handle of Mcusta Zanmai Coreless Aranami Petty knife is made of red pakka wood with a bolster and bottom cap. Mosaic pin on handle and bottom cap. Each knife Mcusta Zanmai Ultimate Coreless Aranami goes in wooden box.
198,79 €
233,87 €

Sold out

-15% Sold out
Coltello da cucina Santoku Mcusta Zanmai Revolution SPG2 18cm ZRB-1203G
The Mcusta Zanmai Revolution SPG2 Santoku is a fantastic japanese chef's knife with a very thin 3-layer steel blade and SPG2 core, a japanese powder steel known for excellent resistance to wear and corrosion. Hardness level is 61HRC with an amazingly lasting sharpness. The soft line between the side supporting steel and the core steel makes an incredibly beautiful blade with design reminding of japanese swords. Revolution has an ergonomic soft, bent handle compared to many other models from japanese Zanmai. The beautifully designed handle of black pakka wood lies perfectly in the hand and gives a firm and steady grip. Blade length: 18 cm. Full length: 34 cm. Weight: 166 gram.
164,51 €
193,54 €

Sold out

-15% Sold out
Gyuto (coltello da chef) Coltello da cucina Mcusta Zanmai Forest 21cm HBG-6005M
Japanese chef knife gyuto Mcusta Zanmai Forest with 210 mm blade. Mcusta Zanmai Forest Molybdenum Series is a great introduction to high quality Japanese knives. For this series, Zanmai forges each blade using Molybdenum Vanadium 8A steel and sharpens them utilizing Zanmai's famous Hamaguri V-Cut form. This grinding method results in incredibly sharp knives that are easy to use and maintain. The handle’s end caps are mirror finished and provide additional balance. The beautiful green micarta hangles are triple-riveted to complete this professional quality knife at an affordable price. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives and scissors at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
88,43 €
104,03 €

Sold out

-15% Sold out
Yanagiba Coltello da cucina TOJIRO Shirogami for Left-Handed 24cm F-908L
Tojiro Shirogami Yanagi-Sashimi knife 24 cm for left-handed. Knife for sushi and sashimi has single edged blade. Core blade by Shirogami steel, outer layer by soft iron, it is easy to re-sharpen and has good edge retention. Handle of Shirogami Yanagi-Sashimi 24 cm is made from magnolia and has good water resistance. Tojiro Shirogami carbon knives should be used carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
113,80 €
133,88 €

Sold out

-15% Sold out
Coltello da cucina Sakai Takayuki Mukimono Inox 18cm 04397
Japanese Sakai Takayuki Mukimono Inox knife with  18cm  blade. Mukimono is kitchen knife with a thin blade that is commonly used for the Japanese art of Mukimono (Creating decorative garnishes), and also Kazari-giri (“Decorative vegetable carving”). However, it is often used as a general-purpose knife.  The Mukimono Hōchō has blade geometry similar to the Usuba, but it is ground much thinner and is smaller in size. Similar to the Kiritsuke, it also has a 'clipped point’ / ‘reverse tanto tip’ that is primarily intended for making the decorative cuts mentioned above, but it is also useful for any task which requires the precise cutting of soft ingredients.  Blade is made chrome and molybdenum 8A stainless steel. Sakai Takayuki Inox knives are sharp and do not rust easily due to their special material. The U shaped magnolia handles and water buffalo bolsters are easy to grip and are comfortable in the hand, even through long hours of use.  This Sakai Takayuki Mukimono knife is easy to sharpen and recommended for business and home use. 
104,19 €
122,58 €

Sold out

-15% Sold out
Gyuto (coltello da chef) Coltello da cucina TOJIRO Home 20cm F-1303
Japanese Tojiro Home Chef knife Gyuto with 20 cm blade. This new Tojiro Home series is created to fulfill the requirements of modern life quality wise and design wise. Handle of Tojiro Home Chef knife F-1303 is made of blue/black mikarta. It hand carved and polished, comfortably fits in your hand. VG10 as core blade, covered by anti-rust 13 chrome stainless steel on both sides, which establish both professional sharpness and easy maintenance for home users. Edge is convex ground so that it has good balance of sharpness and durability, and easy to re-sharpen. Weight of Tojiro Home Chef knife F-1303 is 180 g.Please, use your Tojiro knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
105,56 €
124,19 €

Sold out

-15% Sold out
Yanagiba Coltello da cucina TOJIRO Shirogami Left-Handed 27cm F-909L
Tojiro Shirogami Steel Yanagi-Sashimi knife for left-handed with 270mm blade. Core blade by Shirogami steel, outer layer by soft iron, it is easy to re-sharpen and has good edge retention.Handle is made from magnolia and has good water resistance. Weight of Tojiro Shirogami Yanagi-Sashimi F-909 knife is 160g.Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
146,01 €
171,78 €

Sold out

-15% Sold out
Kiritsuke Coltello da cucina TOJIRO Handmade 18cm J1
Japanese Kiritsuke knife handmade by Tojiro blacksmiths. Handle is made of wood. Blade is made of VG10 Damascus steel, 63 layered, hammered. Tojiro handmade chef knife goes in wooden box.Tojiro designs and builds several collections of chef knives at their shop in the Japanese city of Niigata, long known for its knife and tool making expertise. This Kiritsuke knife represents the pinnacle of their kitchen knives, hand-forged by a small team outside of the operations where many of their knives are produced.
260,48 €
306,45 €

Sold out

-15% Sold out
Gyuto (coltello da chef) Coltello da cucina Sukenari SG2 21cm S-512
Sukenari Gyuto japanese chef knife. Blade lenght is 210 mm. Traditional Japanese octagonal magnolia handle. Blade of chef knife Sukenari is made of SG2  steel (3 layers). The SG2 powdered steel is high carbon content and a high alloy stainless steel. Buffalo horn ferrule. This Sukenari Gyuto japanese chef knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
185,08 €
217,74 €

Sold out

-15% Sold out
Gyuto (coltello da chef) Coltello da cucina Ryusen Hamono Bonten Unryu 21cm BU304
The Bonten Unryu is one of the signature lines by Ryusen. It is considered as one of the best VG10 line by any Japanese maker, because of its unmatched artistics and more importantly, their VG10 blades are hande forged one-by-one. This Gyuto (Chef knife) Ryusen Hamono Bonten Unryu with japanese type handle. The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Gyuto  knife goes in black gift box.
219,35 €
258,06 €

Sold out

-15% Sold out
Santoku Coltello da cucina Ryusen Hamono Bonten Unryu 17.5cm BU307
The Bonten Unryu is one of the signature lines by Ryusen. It is considered as one of the best VG10 line by any Japanese maker, because of its unmatched artistics and more importantly, their VG10 blades are hande forged one-by-one. This Santoku Ryusen Hamono Bonten Unryu with japanese type handle.The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Santoku knife goes in black gift box.
185,08 €
217,74 €

Sold out

-15% Sold out
Set di coltelli da cucina Mcusta Zanmai Limited Edition Suzaku ZLS-9999R
Exclusive Mcusta Zanmai Limited Edition Suzaku set, rainbow damascus with acrilyc resin handles. In order to celebrate 10 years of the Zanmai brand, the company has developed a limited series with 50 sets of knives. It is definitely a purchase for collectors!
Sets are numbered. At MyGoodKnife you can buy 48/50 and 49/50. Set contains 4 knives: 15 cm Petty, 18 cm Santoku, 21 cm Chef´s knife, 23 cm Kiritsuke.
Blade material: Hammered rainbow Damascus with core from carbon Blue steel (Aogami) #2. Bolster and handle are made from Nickel silver alloy. Octagonal handle with decorative rivet. Handle material: Acrylic with Suzaku design. Set is delivered in wooden bureau with drawers. Made in Japan.
2.741,93 €
3.225,80 €

Sold out

-15% Sold out
Gyuto (coltello da chef) Coltello da cucina Mcusta Zanmai Forest 18cm HBG-6004M
Japanese chef knife gyuto Mcusta Zanmai Forest with 180 mm blade. Mcusta Zanmai Forest Molybdenum Series is a great introduction to high quality Japanese knives. For this series, Zanmai forges each blade using Molybdenum Vanadium 8A steel and sharpens them utilizing Zanmai's famous Hamaguri V-Cut form. This grinding method results in incredibly sharp knives that are easy to use and maintain. The handle’s end caps are mirror finished and provide additional balance. The beautiful green micarta hangles are triple-riveted to complete this professional quality knife at an affordable price. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives and scissors at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
67,86 €
79,83 €

Sold out

-15% Sold out
Santoku Coltello da cucina Mcusta Zanmai Forest 18cm HBG-6003M
Japanese kitchen knife Mcusta Zanmai Forest Santoku with 180 mm blade. Mcusta Zanmai Forest Molybdenum Series is a great introduction to high quality Japanese knives. For this series, Zanmai forges each blade using Molybdenum Vanadium 8A steel and sharpens them utilizing Zanmai's famous Hamaguri V-Cut form. This grinding method results in incredibly sharp knives that are easy to use and maintain. The handle’s end caps are mirror finished and provide additional balance. The beautiful green micarta hangles are triple-riveted to complete this professional quality knife at an affordable price. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives and scissors at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
78,83 €
92,74 €

Sold out

-15% Sold out
Spelucchino Dritto Coltello da cucina Mcusta Zanmai Forest 9cm HBG-6000M
Japanese kitchen knife Mcusta Zanmai Forest Petty with 90 mm blade. Mcusta Zanmai Forest Molybdenum Series is a great introduction to high quality Japanese knives. For this series, Zanmai forges each blade using Molybdenum Vanadium 8A steel and sharpens them utilizing Zanmai's famous Hamaguri V-Cut form. This grinding method results in incredibly sharp knives that are easy to use and maintain. The handle’s end caps are mirror finished and provide additional balance. The beautiful green micarta hangles are triple-riveted to complete this professional quality knife at an affordable price.
52,78 €
62,10 €

Sold out