Couteaux de cuisine manche en bois

Les couteaux de cuisine manche en bois ont fière allure dans n'importe quelle cuisine. Nous proposons une large gamme de couteaux avec des manches en différents bois : noyer, olivier, chêne et autres. Veuillez noter que les couteaux de cuisine avec manche en bois ne passent pas au lave-vaisselle.

Couteau à filet Old Hickory OH417 15.9cm
Couteau de cuisine Old Hickory 15.9cm OH417
Old Hickory fillet knife with 6 1/4" (159 mm) stainless blade. Superb American hand craftsmanship, the finest high carbon steel and genuine hickory wood are the ingredients for the OLD HICKORY line of knives. Over 20 hand operations are performed to produce an OLD HICKORY KNIFE, the fastest selling line of carbon steel knives on the market. Blades are tempered and hand ground to retain sharpness. Hickory handle are flame burnt and buffed for a unique antiqued finish. Packaged in a protective skin pack or open carded.
28,87 €

En stock

Santoku Couteau Japonais TOJIRO Zen Black FD-1567 16.5cm
Santoku Couteau de cuisine TOJIRO Zen Black 16.5cm FD-1567
Le couteau Santoku Tojiro Zen Black FD-1567 possède une lame de 165 mm. Ce couteau utilitaire japonais peut remplacer ou compléter un couteau de chef. Sa lame présente une construction traditionnelle à trois couches, typique des couteaux japonais. Le noyau est en acier VG-10, tandis que les couches extérieures sont en acier chromé avec une finition d'oxydation noire. Le manche traditionnel est en bois de châtaignier japonais. Ce couteau passe au lave-vaisselle et ne doit pas être utilisé pour couper des aliments congelés. Le couteau Santoku Tojiro Zen Black FD-1567 pèse 125 g. Il est présenté dans un élégant coffret et constitue un cadeau idéal.
139,67 €

En stock

Couteau de cuisine universel Böker Damascus Olive Santoku 130437DAM 17.2cm
Couteau de cuisine Böker Damascus Olive Santoku 17.2cm 130437DAM
Boker Damascus Olive Santoku kitchen knife combines traditionally Japanese handle made of olive wood with razor-sharp blade made of stainless Damascus with 37 layers of steel, characterized by a beautiful grain. The extremely high-impact core of the Damascus blade consists of the high-performance VG-10 steel. The noticeable sharpness when cutting is breathtaking and makes cooking an experience. The Japanese design of the knife handle with the matted stainless steel clamps gives the line its special character. The Santoku is a knife that is also becoming more and more popular in Europe. Translated, his name means "The Three Virtues", it is equally suitable for meat, fish and vegetables. Thanks to the wide blade, the Santoku is particularly easy to handle. Please only hand wash the knives, do not place in dishwasher. Total 29,8 cm, Blade 17,2 cm, Thickness 3 mm. Weight 140 g.
200,40 €

En stock

Gyuto Couteau Japonais Daisuke Nishida Shirogami DN-11212 18cm
Gyuto Couteau de cuisine Daisuke Nishida Shirogami 18cm DN-11212
Japanese chef knife gyuto is handmade by Daisuke Nishida. Blade length 180 mm. Blade of this chef knife is made of Shirogami carbon steel. The whole is complemented by a handle made  of cherry wood  finished  with a plastic cap. The structure is extremely light and the D-shaped  handle perfectly fits the hand. Weight is 165 g. This  knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by Japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. Daisuke Nishida knives due to hand-made may slightly differ from the pictures and dimensions shown. 
151,81 €

En stock

Kiritsuke Couteau Japonais Goko Hamono Shirogami S/S Clad GHO-009 20cm
Kiritsuke Couteau de cuisine Goko Hamono Shirogami S/S Clad 20cm GHO-009
Goko Hamono kiritsuke knife with is 20 cm blade. Kiritsuke blades have arguably the most iconic profiles of any blade in the Japanese knife world. The reverse tanto tip gives the knife a very weapon-like appearance. Constructed using a core of white #1 steel and covered with a stainless outer cladding. Comes with a nice oak octagonal handle and a durable pakka wood ferrule.
282,38 €

En stock

Bunka Couteau Japonais Goko Hamono Shirogami S/S Clad GHO-008 17cm
Bunka Couteau de cuisine Goko Hamono Shirogami S/S Clad 17cm GHO-008
Goko Hamono bunka knife with is 17 cm blade. Bunka is a general purpose knife tackling a wide range of common kitchen tasks. Constructed using a core of white #1 steel and covered with a stainless outer cladding. Comes with a nice oak octagonal handle and a durable pakka wood ferrule.
262,13 €

En stock

Gyuto Couteau Japonais Goko Hamono Shirogami S/S Clad GHO-005 18cm
Gyuto Couteau de cuisine Goko Hamono Shirogami S/S Clad 18cm GHO-005
With an overall blade length of 18 cm, the Goko Hamono gyuto is the perfect knife for almost all of your daily cutting and chopping needs. It comes with a lovely rustic blade constructed of white #1 carbon with a cladding of stainless steel. The steel is hardened to 60-61 HRC. A lovely rustic finish and oak wood octagonal handle complete the package.
258,08 €

En stock

Santoku Couteau Japonais Goko Hamono Shirogami S/S Clad GHO-003 16.5cm
Santoku Couteau de cuisine Goko Hamono Shirogami S/S Clad 16.5cm GHO-003
Goko Hamono santoku Japanese kitchen knife with is 16,5 cm blade. Santoku knife is the best model for slicing, dicing and mincing. Constructed using a core of white #1 steel and covered with a stainless outer cladding, this small and nimble knife is the ideal utensil for small slicing and dicing jobs as well as a great tool for those intricate garnishes. Goko Hamono santoku comes with a nice upgraded oak octagonal handle and a durable pakka wood ferrule.
200,40 €

En stock

Petty Couteau Japonais Goko Hamono Shirogami S/S Clad GHO-002 15cm
Petty Couteau de cuisine Goko Hamono Shirogami S/S Clad 15cm GHO-002
Goko Hamono petty Japanese kitchen knife with is 15 cm blade. Petty is the Japanese word for a paring or utility knife, it comes from the French word “petite". Constructed using a core of white #1 steel and covered with a stainless outer cladding, this small and nimble knife is the ideal utensil for small slicing and dicing jobs as well as a great tool for those intricate garnishes. The petty now comes with a nice upgraded oak octagonal handle and a durable pakka wood ferrule.
191,29 €

En stock

Petty Couteau Japonais Goko Hamono Shirogami S/S Clad GHO-001 12cm
Petty Couteau de cuisine Goko Hamono Shirogami S/S Clad 12cm GHO-001
This 120mm Goko Hamono petty is a perfect example of their simple philosophy to blade making. Constructed using a core of white #1 steel and covered with a stainless outer cladding, this small and nimble knife is the ideal utensil for small slicing and dicing jobs as well as a great tool for those intricate garnishes. The petty now comes with a nice upgraded oak octagonal handle and a durable pakka wood ferrule.
160,92 €

En stock

Gyuto Couteau Japonais Ryusen Hamono BU-305 18cm
Gyuto Couteau de cuisine Ryusen Hamono 18cm BU-305
Japanese chef knife Ryusen Hamono Bonten Unryu Wa with 18 cm blade. The Bonten Unryu is one of the signature lines by Ryusen. It is considered as one of the best VG10 line by any Japanese maker, because of its unmatched artistics and more importantly, their VG10 blades are hande forged one-by-one. The blade of the Unryu wa series, is constructed identical as the western handle Unryu series.It has a core of VG-10, with 63 layers of stainless damascus steel. The blade is relatively thin, with a medium / light weight, but not as thin as a laser. Due to the classic Japanese perfectly shaped octagonal handle, it is easy to control and effortlessly will do exactly what it is made for cutting perfectly. The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Gyuto  knife goes in black gift box.
273,27 €

En stock

Gyuto Couteau Japonais Goko Hamono Shirogami S/S Clad GHO-007 24cm
Gyuto Couteau de cuisine Goko Hamono Shirogami S/S Clad 24cm GHO-007
Gyuto 240 made by Goko Hamono. This knife is made from 3 layers of steel using a technique called Sanmai (Forge welding). It involves laminating a piece of carbon steel with pieces of stainless steel, which gives the knife all the benefits of the carbon steel (edge retention, ease of sharpening, cutting feel) and the aase of Maintenance from stainless steel. 2-3 millimeters of the carbon steel is exposed at the curring edge of the knife and is susceptible to rust and discoloration if not properly maintained. Oak octagon handle. Hand-dry your knife. This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
302,62 €

En stock

Nakiri Couteau Japonais Gihei Hamono SLD GH-301 16.5cm
Nakiri Couteau de cuisine Gihei Hamono SLD 16.5cm GH-301
Japanese kitchen knife nakiri by Gihei Hamono. Blade is made of SLD steel with stainless steel clad.  SLD stainless steel was originally designed by Hitachi for cutting other steels. It holds an edge as long as a carbon steel, but is much easier to care for. The base of the steel is SKD11 with hardness up to 61-63HRC. This Gihei Hamono Nakiri has a handle of magnolia and plastic ferrule. Never wash any Japanese knife in a dishwasher. This knife has a thin blade and should not be used on hard items such as bones or frozen foods.
160,92 €

En stock

Sujihiki Couteau Japonais Ittetsu IS-46 27cm
Sujihiki Couteau de cuisine Ittetsu 27cm IS-46
Ittetsu Sujihiki knife with 27 cm blade. Blade is made of SLD steel by Hitachi. SLD is a cold work die steel with high abrasion resistance for general use, excellent harden-ability and minimal quench stress. Handle: ashtree / quince. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
252,01 €

En stock

Le set de couteaux Claude Dozorme Breakfast set 3 pcs Olive 2.13.105.89
-25,10 €
Le set de couteaux Claude Dozorme Breakfast set 3 pcs Olive 2.13.105.89
Stylish breakfast set from Claude Dozorme includes a small bread knife, cheese knife and butter knife. The blades are made of high quality stainless steel X50CrMoV15. Natural olive handles. Bread knife total length is 23 cm, blade 11,5 cm. Cheese knife 22 cm, blade 10 cm. Butter knife 19 cm, blade 7,5 cm. The set includes wooden packaging.
50,81 €
75,91 €

En stock

Couteau Japonais Ittetsu Honesuki IS-47 15cm
Couteau de cuisine Ittetsu Honesuki 15cm IS-47
Ittetsu Honesuki knife with 15 cm blade. Honesuki is specifically designed for de-boning and breaking down poultry, but is also capable of filleting fish or meat and carrying out many tasks. Blade is made of SLD steel by Hitachi. SLD is a cold work die steel with high abrasion resistance for general use, excellent harden-ability and minimal quench stress. Handle: ashtree / quince. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
177,12 €

En stock

Yanagiba Couteau Japonais Sukenari 2 layers VG10 S-1012 27cm
Yanagiba Couteau de cuisine Sukenari 2 layers VG10 27cm S-1012
Sukenari Yanagiba knife. Blade length is 270 mm. Traditional Japanese octagonal magnolia handle. Blade of this Sukenari knife is made of VG10 steel (3 layers). This Sukenari yanagiba japanese knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
403,83 €

En stock

Couteau Japonais Seki Kanetsugu Nami Wine 92011 10cm
Couteau de cuisine Seki Kanetsugu Nami Wine 10cm 92011
Seki Kanetsugu Nami Steak knife Wine colour. Steak knife Nami is made of coreless Damascus (laminated material of VG2 and VG10), blending high-tech with swordsmith tradition, the highest quality comfort was born. Seki Kanetsugu uses  “ocean wave” motif which came from a traditional Japanese painting. The founder Kanetsugu began to make the Japanese swards in the 14th century at Mino. Now Seki Kanetsugu incorporates "Hamaguriha" which is the sectional shape of Japanese sword into kitchen knife, making knife that lasts sharpness. Seki Kanetsugu Nami Steak knives are not allowed to wash in dishwasher.
150,80 €

En stock

Santoku Couteau Japonais Yu Kurosaki Shizuku R2 Keyaki ZR-165SA 16.5cm
Santoku Couteau de cuisine Yu Kurosaki Shizuku R2 Keyaki 16.5cm ZR-165SA
Couteau Santoku Yu Kurosaki avec lame de 165 mm. Cette série Yu Kurosaki est dotée de lames au fini tsuchime R2. Ce santoku R2 fait à la main a un niveau incroyable de finition et de polissage, avec les motifs Tsuchime "Shizuku" emblématiques de Kurosaki qui sont à la fois esthétiques et fonctionnels. La poignée octogonale est en bois keyaki. Laver et sécher avec une éponge douce et ranger en toute sécurité après utilisation. Évitez de couper dans les os, les aliments surgelés, les noyaux de fruits durs. Surface de coupe recommandée: le bois, les planches caoutchoutées et les composites haut de gamme, ainsi que les plastiques de qualité tels que le polyéthylène constituent des surfaces de coupe acceptables et aideront à protéger et à prolonger le tranchant du couteau. Évitez le verre, le métal, les comptoirs et autres surfaces rigides qui ne pardonnent pas. Yu Kurosaki travaille dans le village de couteaux de Takefu.
354,23 €

En stock

Yanagiba Couteau Japonais Tojiro MV F-1057 24cm
Yanagiba Couteau de cuisine Tojiro MV 24cm F-1057
Tojiro MV Yanagiba Sashimi knife F-1057 with 240mm blade. Blade made from wear and rust resistant Molybdenum Vanadium steel. So that its maintenance is easier than carbon steel knives and therefore suitable for beginners. However, edge is carefully sharpened without compromise by our craftsman. Handle is made from magnolia and has good water resistance. Weight of Tojiro MV Yanagiba F-1057 knife is 120 g. Like other traditional Japanese knife blades, this knife has a bevel on only one side of the blade, to help achieve even slices.
112,34 €

En stock

Sujihiki Couteau Japonais Tojiro Zen Black FD-1569 21cm
Sujihiki Couteau de cuisine Tojiro Zen Black 21cm FD-1569
Tojiro Zen Black sujihiki slicing knife with 210 mm blade. VG10 as core steel, clad by 13-chrome stainless steel, it has achieved both professional sharpness and easy maintenance. Black oxide processing, which is the technology often used for medical equipment, has been applied on blade. The blade thus has both outstanding corrosion resistance and beautiful visual aspect. Tojiro Zen Black Slicer FD-1569 weights 110 g. Chestnut handle has excellent durability, and additionally applied fire treatment on surface makes it even stronger. Tojiro Zen Black Slicer FD-1569 is not allowed to wash by dishwasher. It has very hard, but thin blade and not allowed to cut bones and meat with bones, coconuts and other nuts, other hard products.
139,67 €

En stock

Nakiri Couteau Japonais TOJIRO FD-1568 16.5cm
Nakiri Couteau de cuisine TOJIRO 16.5cm FD-1568
Le couteau nakiri Tojiro Zen Black FD-1568 possède une lame de 165 mm. Ce couteau de cuisine japonais, idéal pour trancher et hacher, est principalement utilisé pour les légumes. Sa lame est composée d'un noyau en acier VG-10 et de parements en acier chromé noir. Le manche ovale traditionnel japonais en bois de châtaignier passe au lave-vaisselle et convient parfaitement à la découpe d'aliments congelés, d'os et d'autres aliments très durs. Le couteau nakiri Tojiro Zen Black FD-1568 pèse 145 g et est présenté dans un élégant coffret de la marque.
136,63 €

En stock

Gyuto Couteau Japonais TOJIRO Zen Black FD-1565 24cm
Gyuto Couteau de cuisine TOJIRO Zen Black 24cm FD-1565
Le couteau de chef Tojiro Zen Black FD-1565 possède une lame de 24 cm. La lame à trois couches de la série ZEN est en acier VG-10 et offre un tranchant exceptionnel. Le fourreau est en acier chromé avec une finition noire oxydée. Le manche brun est en bois de châtaignier. Ce couteau de chef ne passe pas au lave-vaisselle et ne doit pas être utilisé pour couper des aliments congelés. Le Tojiro Zen Black FD-1565 pèse 170 g et est livré dans un coffret de la marque.
191,29 €

En stock