Couteaux Japonais en acier au carbone

Les couteaux de cuisine japonais en acier au carbone ont un tranchant très fin et tranchant. Ces couteaux peuvent être affûtés jusqu’au tranchant d’un rasoir. Les aciers au carbone japonais les plus populaires et de haute qualité sont l'Aogami (« papier bleu ») et le Shirogami (« papier blanc »). Les deux aciers sont de très haute qualité et conviennent à la fabrication de couteaux de cuisine. Le Shirogami est plus facile à aiguiser jusqu'à obtenir une pointe très pointue, mais il est plus fragile et sensible à la rouille. Le tungstène, qui fait partie de l'acier Aogami, résout ces problèmes en rendant les lames des couteaux de cuisine japonais plus durables. Dans notre assortiment, vous trouverez les meilleurs couteaux de cuisine japonais en acier au carbone.

Santoku Japanese kitchen knife Daisuke Nishida Small Shirogami Bocote DN-11223BGA 12cm
Santoku Couteau de cuisine Daisuke Nishida Small Shirogami Bocote 12cm DN-11223BGA
Small Santoku knife handmade by Daisuke Nishida. 12 cm blade is made of Shirogami carbon steel with iron clad. Daisuke Nishida santoku has handle made of bocote wood. This  knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by Japanese knives bones and meat with bones, coconuts and other nuts, other hard products. Daisuke Nishida knives due to hand-made may slightly differ from the pictures and dimensions shown. 
151,81 €

En stock

Nakiri Japanese kitchen knife Tsutomu Kajiwara TK-1118BGA 18cm
Nakiri Couteau de cuisine Tsutomu Kajiwara 18cm TK-1118BGA
Nakiri knife handmade by Tsutomu Kajiwara. Blade 180 mm is made of Aogami 2 steel with iron damascus clad. Traditional handle is made of bocote wood with God’s ash ferrule. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
252,01 €

En stock

Yanagiba Japanese kitchen knife Hideo Kitaoka 11 Shirogami Layers CN-4207 21cm
Yanagiba Couteau de cuisine Hideo Kitaoka 11 Shirogami Layers 21cm CN-4207
Handmade yanagiba knife by Mr. Hideo Kitaoka with 11 layers of a great Shirogami carbon steel on the 21 cm blade. Handle made of a natural rosenwood. The Yanagiba is a Japanese single-beveled knife, originally designed for sushi and sashimi. Hideo Kitaoka in Takefu, Fukui Province specializes in the production of high-quality single-edged kitchen knives. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
242,90 €

En stock

Nakiri Japanese kitchen knife Ittetsu Shirogami Tall 75 mm IW-11840Z 18cm
Nakiri Couteau de cuisine Ittetsu Shirogami Tall 75 mm 18cm IW-11840Z
The Ittetsu Tall Nakiri knife W-11840Z with 180 mm blade. Tall nakiris are longer and taller than a normal nakiri knife. This one is 75 mm tall. This nakiri is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal Keyaki (Zelkova). Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
172,06 €

En stock

Yanagiba Japanese kitchen knife Ittetsu Shirogami 2 IJF-11424 24cm
Yanagiba Couteau de cuisine Ittetsu Forge-welded Shirogami 2 24cm IJF-11424
The japanese knife Ittetsu Yanagiba IJF-11424 with 240 mm blade. The rosewood handle is both beautiful and practical. Forge-welded blade is made of Shirogami #2 carbon steel. This knife has a bevel on only one side of the blade, to help achieve even slices. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. Ittetsu knives are handmade in Echizen city, Japan.
191,29 €

En stock

Japanese kitchen knife Ittetsu Usuba Shirogami 2 IJF-11143 21cm
Couteau de cuisine Ittetsu Usuba Forge-welded 21cm IJF-11143
Designed specifically for cutting vegetables the Japanese kitchen knife Ittetsu Usuba IJS-11143 with 210 mm forge-welded blade made of Shirogami #2 carbon steel. As another tool in the kitchen, the Usuba knife can become invaluable when preparing traditional Japanese cuisine. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
253,02 €

En stock

Yanagiba Japanese kitchen knife Ittetsu Shirogami 2 IJF-11126 30cm
Yanagiba Couteau de cuisine Ittetsu Forge-welded Shirogami 2 30cm IJF-11126
The japanese knife Ittetsu Yanagiba IJF-11126 with 300 mm blade. This knife has a bevel on only one side of the blade, to help achieve even slices. Forge-welded blade is made of Shirogami #2 carbon steel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. Handle is made from magnolia and has good water resistance. Ittetsu knives are handmade in Echizen city, Japan.
241,89 €

En stock

Yanagiba Japanese kitchen knife Ittetsu Shirogami 2 IJF-11122 18cm
Yanagiba Couteau de cuisine Ittetsu Forge-welded Shirogami 2 18cm IJF-11122
The japanese knife Ittetsu Yanagiba IJF-11122 with 180 mm blade. Forge-welded blade is made of Shirogami #2 carbon steel. Handle is made from magnolia and has good water resistance. This knife has a bevel on only one side of the blade, to help achieve even slices. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. Ittetsu knives are handmade in Echizen city, Japan.
121,45 €

En stock

Deba Japanese kitchen knife Ittetsu IJF-11112 24cm
Deba Couteau de cuisine Ittetsu Forge-welded Shirogami 2 24cm IJF-11112
The japanese kitchen knife Ittetsu Deba IJF-11112 with 240 mm polished blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
253,02 €

En stock

Deba Japanese kitchen knife Ittetsu Shirogami 2 IJF-11108 18cm
Deba Couteau de cuisine Ittetsu Forge-welded Shirogami 2 18cm IJF-11108
The japanese kitchen knife Ittetsu Deba IJF-11108 with 180 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
141,69 €

En stock

Deba Japanese kitchen knife Ittetsu Shirogami 2 IJF-11106 15cm
Deba Couteau de cuisine Ittetsu Forge-welded Shirogami 2 15cm IJF-11106
Couteau de cuisine japonais Ittetsu Deba IJF-11106 avec lame forgée de 150 mm en acier carbone Shirogami n° 2. Le manche ovale est en bois de magnolia. La lame est à simple biseau. L'acier carbone est sensible à la rouille et doit être maintenu sec et propre en permanence pour éviter l'oxydation et la décoloration. Lavez à la main à l'eau tiède et essuyez avec une serviette. Les couteaux Ittetsu sont fabriqués à la main à Echizen, au Japon.
129,00 €

En stock

Deba Japanese kitchen knife Ittetsu Shirogami 2 IJF-11104 12cm
Deba Couteau de cuisine Ittetsu Forge-welded Shirogami 2 12cm IJF-11104
Couteau de cuisine japonais Ittetsu Deba IJF-11104 avec lame forgée soudée de 120 mm en acier carbone Shirogami n° 2. Ce couteau est utilisé pour la découpe de petits poissons, de viandes et de légumes. Son manche ovale est en bois de magnolia. La lame est à simple biseau. L'acier carbone est sensible à la rouille et doit être maintenu sec et propre en permanence pour éviter l'oxydation et la décoloration. Lavez à la main à l'eau tiède et essuyez avec une serviette. Les couteaux Ittetsu sont fabriqués à la main à Echizen, au Japon.
119,00 €

En stock

Couteau Japonais Ittetsu Uraoshi Usuba Stamped IJS-11141 18cm
Couteau de cuisine Ittetsu Uraoshi Usuba Stamped 18cm IJS-11141
Le couteau de cuisine japonais Ittetsu Uraoshi Usuba est conçu pour couper et râper les légumes. Le couteau a une longueur de lame de 180 mm. Le manche ovale est en bois de magnolia. La lame est en acier au carbone Shirogami #2. L'acier au carbone est sujet à l'oxydation, le couteau doit donc être conservé au sec et propre. Seul le lavage des mains à l'eau tiède est autorisé, avec essuyage obligatoire. Les couteaux Ittetsu sont fabriqués à la main dans la ville d'Echizen, préfecture de Fukui, au Japon.
121,45 €

En stock

Couteau Japonais Ittetsu Uraoshi Kaisaki Stamped IJS-11155 15cm
Couteau de cuisine Ittetsu Uraoshi Kaisaki Stamped 15cm IJS-11155
The kaisaki it's a small general purpose single bevel traditional Japanese knife, which resembles a small Yanagiba and can be used for filleting small fish and shellfish, peeling and slicing vegetables, gutting or slicing small pieces of meat. Japanese kitchen knife Ittetsu Uraoshi Kaisaki IJS-11155 with 150 mm polished blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
80,97 €

En stock

Couteau Japonais Ittetsu Uraoshi Ajikiri Stamped IJS-11102 12cm
Couteau de cuisine Ittetsu Uraoshi Ajikiri Stamped 12cm IJS-11102
Japanese kitchen knife Ittetsu Uraoshi Ajikiri IJS-11102 with 120 mm polished blade made of Shirogami #2 carbon steel. Ajikiri is used for small fish, meat and vegetable. The oval shaped handle is made of magnolia wood. The blade is single bevel Uraoshi. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
74,90 €

En stock

Bunka Couteau Japonais Ittetsu Shirogami IW-11836 21cm
Bunka Couteau de cuisine Ittetsu Shirogami 21cm IW-11836
Bunka knife Ittetsu with 210 mm blade. This bunka is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Zanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
197,36 €

En stock

Santoku Japanese kitchen knife Takeshi Saji Iron Wood HG-3104 18cm - 1
Santoku Couteau de cuisine Takeshi Saji Iron Wood 18cm HG-3104
Handmade Japanese santoku knife by Mr. Takeshi Saji. Blade 3 Layer Aogami Super steel with black hammered finish. Blade length 18 cm. Handle - iron wood with stainless steel bolster. Weight of santoku knife HG-3104 by Takeshi Saji is about 200 g.Takeshi Saji is a Chairman of Saji Balacksmith (Japan). Member of Japan Knife Guild and Japan Custom Knife Makers. In 1992, he was officially certified as Dentoukougeishi, a “Traditional Master Craftsman” by the Japanese “Ministry of International Trade & Industry”.
384,60 €

En stock

Nakiri Couteau Japonais Ittetsu Shirogami Tall 75 mm IW-11840 18cm
Nakiri Couteau de cuisine Ittetsu Shirogami Tall 75 mm 18cm IW-11840
Tall Nakiri knife Ittetsu with 180 mm blade. Tall nakiris are longer and taller than a normal nakiri knife. This one is 75 mm tall. This nakiri is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
191,29 €

En stock

Sujihiki Couteau Japonais Ittetsu Shirogami IW-11818 21cm
Sujihiki Couteau de cuisine Ittetsu Shirogami 21cm IW-11818
Sujihiki Ittetsu with 210 mm blade is a double edge slicing knife with a long narrow blade. This knife smoothly slices through meat or vegetables and preserves the integrity of each ingredient's freshness. This Ittetsu sujihiki is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
151,81 €

En stock

Petty Couteau Japonais Ittetsu Shirogami IW-11824 18cm
Petty Couteau de cuisine Ittetsu Shirogami 18cm IW-11824
Petty knife Ittetsu with 180 mm blade. This japanese kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
121,45 €

En stock

Gyuto Couteau Japonais Ittetsu Shirogami IW1187 18cm
Gyuto Couteau de cuisine Ittetsu Shirogami 18cm IW1187
Japanese chef knife gyuto Ittetsu with 18 cm blade. Blade is made of Shirogami Iron Clad steel. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. The Gyuto is the Japanese equivalent to a standard western style chef's knife and is an essential for the professional cook/chef.
154,85 €

En stock

Gyuto Couteau Japonais Tsutomu Kajiwara TK-1124 24cm
Gyuto Couteau de cuisine Tsutomu Kajiwara 24cm TK-1124
Japanese Chef knife gyuto handmade by Tsutomu Kajiwara. Blade 24 cm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
237,84 €

En stock

Gyuto Couteau Japonais Tsutomu Kajiwara TK-1122 18cm
Gyuto Couteau de cuisine Tsutomu Kajiwara 18cm TK-1122
Chef knife gyuto handmade by Tsutomu Kajiwara. Blade 180 mm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
187,24 €

En stock

Couteau Japonais Ittetsu Garasuki Shirogami IW11838 18cm
Couteau de cuisine Ittetsu Garasuki Shirogami 18cm IW11838
Garasuki knife Ittetsu with 180 mm blade. This garasuki is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Garasuki knife is designed for fillet chicken from bones, and fillet fish or pork or beef to remove meat from bones. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
156,88 €

En stock