Dagues

Cols Steel Counter Tac I dagger is a handy boot knife with a wicked penetration potential. The blade shape is inspired by ancient Japanese arrows. There are 2 flat ground edges and a slightly concave edge on the back. This configuration allows for intense penetration and a lightweight tool. The Counter TAC boot knives were designed with this simple philosophy in mind. The full tang blades are made from beautifully stonewashed AUS-8 Stainless steel that's vacuum heat treated, and sub-zero quenched for strength. They end in a sturdy but needle sharp point that’s ideal for effortless penetration, and of course the edge is razor sharp. The ergonomic design of the Kray-Ex grip is comfortable and adaptable to any fighting style, and the deeply textured surface and double guard will insure that the knife is not likely to slip from your hand under any circumstances. Finally, each Counter TAC is shipped with a state of the art Secure-Ex sheath, complete with a removable boot/belt clip and lashing slots so you can carry or conceal it just about anywhere. Weight 4.6 oz (130 g.)

Cols Steel Counter TAC II dagger is a small boot knife, which comfirms that good design never goes out of style. The knife has a 3.375" full tang blade, whis is made from beautifully stonewashed AUS-8 Stainless steel that's vacuum heat treated, and sub-zero quenched for strength. They are hollow ground and end in a sturdy but needle sharp point that’s ideal for effortless penetration, and of course the edge is razor sharp. The ergonomic design of the Kray-Ex grip is comfortable and adaptable to any fighting style, and the deeply textured surface and double guard will insure that the knife is not likely to slip from your hand under any circumstances. Finally, each Counter TAC is shipped with a state of the art Secure-Ex sheath, complete with a removable boot/belt clip and lashing slots so you can carry or conceal it just about anywhere. Weight 2.1 oz (60 g.)

The Drop Forged Boot Knife is a knife designed for concealed carry. With a keen double-edged 5” blade and needle sharp tip, it’s a substantial and shockingly effective last ditch self-defense tool, but thanks to its slim profile and one-piece construction it carries remarkably flat without “printing”. Cold Steel Drop Forged Boot is 9" overall. Knife has 5" double edge 52100 high carbon steel blade, one-piece construction. Lanyard hole. Knife comes with black Secure-Ex clip sheath.

Sheffield Commando Dagger Black Knife. 11.875" overall length. 6.875" Stainless Steel Black Finish blade. Black Stainless Steel Handle. Sykes Fairbairn pattern. Stainless Steel guard. Comes with Black Genuine Leather belt sheath. Made in Sheffield, England.

Taking inspiration from the classic "Trench Knives" from both World Wars of the last century, Cold Steel has developed a series of new tactical fixed blades that are suitable for the challenges faced by today's modern day warriors. Cold Steel Chaos series fixed blades are equipped with unique "D" ring guards made from reinforced 6061 aluminum, allowing for an incredibly secure and comfortable grip while protecting the hand both from incoming attack and damage while striking or cutting an opponent who's covered in body armor, ammo, flashlights, magazines and gear! Their extra thick 1055 carbon steel pommels are tapered to concentrate the percussive force of a hammering strike, and their full tang SK-5 High Carbon steel blades are expertly heat treated for maximum performance. Their tough Secure-Exª sheaths are Molle-Lok and Tek-Lok compatible, with rugged adjustable Cor-Ex belt loops and retaining straps for a secure and reliable lock up when not in use.The Chaos series combine maximum safety and security with extreme performance and combat potential.

Cold Steel Chaos Push dagger is designed from the ground up to be the best in the toughest military and special operations environments. The blade with a wide double-edged blade, sharpened to a razor sharpness, is made of Japanese SK-5 carbon steel. But it is the D-guard grip that really makes it unique as it provides unparalleled protection for your hands and fingers. Injection molded Griv-Ex ™ handle with Kray-Ex ™ grips for comfort and impact resistance. This dagger delivers multi-directional impact strikes using the Skull Crusher's twin detachable tips. The Secure-Ex® sheath is highly functional and comes with a Cordura belt loop, so the Chaos Push can be carried with you all the time.

Cold Steel Drop Forged Wasp dagger is 12.25" (31.12cm) overall. Dagger has a 6.75" (17.15cm) black finish double edge 52100 high carbon steel blade. Black sculpted synthetic handle. Full, extended tang. Lanyard hole. Black Secure-Ex belt sheath. Weight 8.0 oz (230 g).

The knives by DJ Urbanovsky have become fixtures in Boker program. His designs are always strongly influenced by his striking style, while always taking the knife's intended use into consideration. With the Boker Plus M92, the knifemaker from Nebraska is presenting his first purebred dagger. The typical handle design clearly shows his signature style, and the milled logo gives the G10 scales of the M92 knife a secure grip. The partially coated 440C blade is double-edged and very sturdy thanks to its generous thickness. Comes with a versatile Kydex sheath.

Extrema Ratio Adra Ordinanza 17 Stormo dagger with black oxide-coated blade 178 mm (7 in) and 17th Stormo logo, serrated partly. 
The “Arditi Distruttori della Regia Aeronautica” (lit. royal air force brave destroyers) were an Italian battalion serving in the North African theater during WW2, and awarded two silver medals of honor.
This ADRA dagger, with its classic European shape, was designed for and with strong input from the commanders and operatives of the 17th. Comes in in ABS engraved case with an ankle sheath and a sand-color parade belt sheath. Total length 311 mm (12.2 in). Weight 331 g (11.7 oz) 

Le poignard Suppressor Operativo d'Extrema Ratio est le poignard commémoratif, émis pour commémorer le trentième anniversaire de l'unité G.I.S., la célèbre unité antiterroriste des Carabiniers (police militaire italienne). Lame oxydée noire 176 mm (6,9 in), sans logo, acier Böhler N690. Gaine latérale incluse. Poids 302 g (10,7 onces)

Ce couteau "Botte de combat" a une lame en acier inoxydable à double tranchant de 4,75" (12 cm) au fini noir. Poignée en ABS noir. Trou de lanière. Gaine de ceinture en nylon camouflage. En boîte.

United Cutlery M48 Cyclone Push dagger is 7.38" (18.75cm) overall. The dagger has 5.75" (14.61cm) two-tone finish 2Cr13 stainless blade. Black TPR handle. Twisted blade design. Black TPR belt sheath. 

The main competition to the Bowie knife from the late 1830's to the period just after the Civil War was the Cold Steel Arkansas Toothpick 88GTP. The model got its namesake as an ironic reference to the coarse, rough and tumble culture that populated the lowlands of Arkansas and the Mississippi delta in the mid 19th century. Travelling journalists from Europe often made up stories about how they commonly saw men and old boys picking their teeth with giant knives that they dubbed Arkansas Toothpicks. Like the Bowie it was frequently a large knife almost always double edged with a sharp acute point. The knife almost always had a double quillon guard and many were fancy and some imitated the Bowies of the day in size and appearance. Sure, some were plain, but most were elaborately decorated. This version has a substantial double edge spear point blade, with a Malaysian Sal wood handle and a fancy pommel with an alligator motif. The scabbard is equally stunning, it's finely made and decoratively enhanced to complement the handle.

Extrema Ratio Herring is one of the fan favorite military daggers. The dagger that entered the history of Italy during the World War II, thanks to the deeds of the young soldiers of the 1st Reconnaissance Squadron Folgore, armed with this weapon during Operation Herring. Extrema Ratio wanted to pay homage to this dagger while retaining the original design using most modern production techniques. The unique handcrafted finish on the handle mimics the aging of brass and gives the dagger a vintage look. The Herring NE version has an unsharpened cutting edge, which allows you to safely store this dagger.

Le Dagger Böker Magnum Sledgedog est un modèle durable avec une large protection en acier inoxydable. Dessinateur Fernando Santos. Lame en acier inoxydable satiné 440B à double tranchant. Le Magnum Hunting Sledgedog offre une fonctionnalité et des performances maximales avec un minimum d'entretien. La poignée ergonomique est en TPR. L'extrémité de la poignée est dotée d'un rivet décoratif en laiton creux pour attacher des cordons. Comprend un étui en cuir de haute qualité.

Suppressor Trentennale from Extrema Ratio is the memorial dagger, issued to commemorate the thirtieth anniversary of the unit G.I.S., the renowned counter-terrorism unit of the Carabinieri (Italian military police). Suppressor Trentennale GIS is a commemorative limited and numbered series of 1000 daggers, bearing both historical and current unit logos. Comes in a hand-polished, clear plexiglass display case. Blade 176 mm (6,9 in), Böhler N690 steel. Weight 302 g (10.7 oz)

Le couteau tactique Extrema Ratio Nimbus Special Edition est une version moderne du couteau d'assaut italien Nimbus de la Seconde Guerre mondiale. L'édition spéciale est livrée avec un manche en bois, une lame en satin, un étui en cuir et un étui spécial en cuir. La lame tactique de 141 mm (5,55") est légère et compacte pour une utilisation facile et est fabriquée en acier Böhler N690. La longueur totale du couteau Nimbus est de 263 mm (10,35 pouces). Ce couteau célèbre la bataille de Case Grizzano qui a eu lieu le 19 avril 1945 entre les parachutistes de Nembo et la 1 Division allemande Fallschirmjäger « Green Devils », une escarmouche au corps à corps extrêmement cruelle et sanglante de 12 heures.

New version of Böker Swiss Dagger 121550. The Swiss Dagger was a common weapon of the Swiss pikemen in the 15th and 16th century, which often had a middle position between dagger and sword due to its blade length. The dagger, also known as Baselard, was usually not issued as ordinance weapons, but had to be purchased privately by the soldiers and then served as a secondary weapon. Characteristic of the Swiss Dagger is the design of the pommel and the crossguard. The unusual, curved design can be traced back to the early 13th century and can also be found in the authentic design of our hand-made edition. Handpicked local cherry wood is used for the handles of the dagger, which has enjoyed great popularity since ancient times, especially because of its reddish color. The dagger blade, sharpened and pointed on both sides, already had a diamond-shaped cross-section in historical models, because this construction proved to be extremely stable and effective. It is made of the classic carbon steel C75 and impresses simply because of its length. The logo and the individual serial number guarantee the authenticity of the knife and stand for consistently high production quality. With elaborate metal sheath. Handmade in the Boker Knife Manufactory Solingen.

The ideal knife Ranger Short Stop TPRSS01 from TOPS, discretely carried, yet strong, effective, and reliable. The blade 1095 has an edge on both sides, and features the black traction coating. The compact dimensions and good balance make it an ideal companion in uncertain situations. The model has a black linen micarta handle. Includes kydex sheath and belt clamp.

Rambo Boot Knife RB9434 comes with an individually serial numbered and has measures 10.83" (27.51cm) overall length. Authentic reproduction of the knife used by Sylvester Stallone in Rambo: First Blood Part II. The blade is made of stainless steel with black finish. The model has a one piece inter-frame design with micarta inlay. The handle features a lanyard hole. Features a top quality satin finish stainless bowie blade. Comes with black leather belt sheath. Limited Edition of just 10,000 individually serial numbered pieces worldwide. 

Böker Applegate-Fairbairn 5.5 version. Nearly no other custom knife maker influenced the tactical knife scene like William H. "Bill" Harsey. His designs created an excellent reputation in the world of the tactical knives. His custom versions are asked for worldwide and they are hard to get. We are glad, that Bill starts with Boker a new collaboration for our serial production. We begin with a modification of the legendary Applegate-Fairbairn dagger. The Harsey 5.5 is in use with several elite units around the world and it will be paired with modern features into a highly functional knife concept. The blade length offer the perfect compromise between the ability to carry it and utility. The enlarged width and the better geometry of the double edged and finely bead blasted 440-C high performance steel blade improve the cutting abilities. The tang reaches out of the end of the handle and it can be used as a windowbreaker. The CNC machined handles, made of green canvas micarta, are extremely durable and comfortable and these offer even in wet environments a perfect grip. It comes with a premium tactical sheath made by Spec-Ops Brand (USA) in black. The sheath can be mounted in different positions and it has a pouch on top (for a multi tool or anything similar, not included!). Overall length 27 cm. Blade 14 cm. Thickness 5 mm. Weight 241 g.

Self-assured elegance complemented with aristocratic lines gives the Acta Non Verba Z400 DLC Black Dural ANVZ400-010 well-deserved dominance over the rest of ANV folding knives. A dagger-type blade with DLC Black coating made of Sleipner steel with a double guard enabling aggressive opening at the edge of your pocket, an extremely durable, grippy, yet light black handle made of Dural 6061-T6 Aluminum, a secure liner lock, or a double-sided deep carry pocket clip. All of this has been designed in combination with a sense for elegance and simplicity. This is the Z400.

Self-assured elegance complemented with aristocratic lines gives the Acta Non Verba Z400 Stonewash Coyote ANVZ400-005 well-deserved dominance over the rest of ANV folding knives. A dagger-type blade made of stonewashed Sleipner steel with a double guard enabling aggressive opening at the edge of your pocket, an extremely durable, grippy, yet light coyote handle made of G10 composite, a secure liner lock, or a double-sided deep carry pocket clip. All of this has been designed in combination with a sense for elegance and simplicity. This is the Z400.

The extraordinary Twisted Damascus is now followed by the Mosaic Damascus, which is also very complex to manufacture. It is one of the royal class of Damascus forging and makes the impressive dagger an absolute highlight in every knife collection. In contrast to conventional Damascus, no layers are produced in the manufacture of Mosaic Damascus. Instead, complex Damascus bars are forged by hand into a mosaic in an elaborate and very complicated process. To do this, the Damascus package, which initially consists of stacked layers, is cut up and reassembled in a staggered manner to create a unique mosaic pattern at the end faces of the bar. The Damascus is then cut up again and the complex process is repeated several times, the resulting pattern becoming finer and more unique with each step. Finally, the individual packages are stacked and forged in the shape of a square so that the ends of the individual pieces form a new surface. Forging temperature, forming, deformation rate and the previous steps must be optimally coordinated. This extremely demanding forging process, which only few Damascus smiths master, is carried out to perfection for our Swiss dagger by Chad Nichols. The dagger blade, sharpened and pointed on both sides, already had a diamond-shaped cross-section in historical models, because this construction proved to be extremely stable and effective. Characteristic of the Swiss Dagger is the design of the pommel and the crossguard. The unusual, curved design can be traced back to the early 13th century and can also be found in the authentic design of our hand-made edition. The shimmering dark handle made of hand-picked certified imported Ebony is bordered by the highly polished pommel and the crossguard and forms a perfect unit with the fine blade. The leather sheath, specially designed and handsewn for this model, underlines the exclusivity of this coveted collector‘s item. It is delivered with an individual serial number in a noble wooden box and with a certificate of authenticity. Handmade in the Boker Knife Manufactory Solingen and strictly limited to 500 pieces worldwide.