Couteaux Deba

Filtrer
Prix
Fabricants
Blade Length, mm
Country
Steel
Handle
Collection
Hardness
Filtrer
Deba Couteau Japonais Hideo Kitaoka 11 Layered Shirogami 15cm CN-4202
Couteau Deba personnalisé 150 mm. Fabriqué à la main par M. Hideo Kitaoka. Acier Shirogami, 11 couches. La lame est affûtée d'un côté. Manche en palissandre japonais, qui a une bonne résistance à l'eau et une surface lisse. Le Deba est traditionnellement utilisé pour nettoyer et fileter des poissons entiers, mais il est également couramment utilisé pour décomposer et habiller la volaille et les viandes avec de petits os. Veuillez utiliser vos couteaux en carbone avec précaution. Il n'est pas recommandé pour ces couteaux - de les laver au lave-vaisselle, de les laisser dans l'eau, de les nettoyer avec des liquides acides, de couper des fruits acides comme le citron. Séchez votre couteau à la main : cela doit être fait immédiatement après le lavage avec un torchon propre. Frottez avec de l'huile minérale. Si vous remarquez des taches de rouille, frottez une légère couche d'huile minérale et laissez sécher.
167,33 €

In stock

Deba Couteau Japonais Hideo Kitaoka 11 Layered Shirogami 16.5cm CN1203
Custom Deba knife 165 mm. Handmade by Mr. Hideo Kitaoka. Shirogami steel, 11 layers. Blade is sharpened on one side. Handle made from Japanese magnolia wood, which has good water resistance and smooth surface. Deba is traditionally used to clean and fillet whole fish, but it is also commonly used for breaking down and dressing poultry and meats with small bones. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
167,33 €

In stock

Deba Couteau Japonais Ittetsu Forge-welded Shirogami 2 16.5cm IJF-11107
The japanese kitchen knife Ittetsu Deba IJF-11107 with 165 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
104,03 €

In stock

Deba Couteau Japonais Hideo Kitaoka 11 Shirogami Layers 21cm CN-4205
Couteau à poisson Deba de M. Hideo Kitaoka avec la lame composée de 11 couches d'un grand acier au carbone Shirogami. Ce couteau Deba lourd de 0,5 kg a une lame de 21 cm. Manche en bois de rose naturel. Il n'est pas recommandé pour de tels couteaux - de les laver au lave-vaisselle, de les laisser dans l'eau, de les nettoyer avec des liquides acides, de couper des fruits acides comme le citron. Séchez votre couteau à la main : cela doit être fait immédiatement après le lavage avec un torchon propre. Frotter avec de l'huile minérale. Si vous remarquez des taches de rouille, frottez une légère couche d’huile minérale et laissez sécher.
257,26 €

In stock

Couteau Japonais Daisuke Nishida Shirogami Bocote 16.5cm DN-11211
The Funayuki DN-11211 knife is forged by Daisuke Nishida and is one of the greatest, magnificent examples of Japanese knives. Funayuki was originally used by fishermen to prepare meals at sea. This is a universal knife, it is equally convenient for them to butcher medium-sized fish, butcher its fillet and cut vegetables. Funayuki combines the look of a deba, a nakiri, and a yanagiba. Blade 165 mm is made of carbon steel Shirogami No. 1 by forge welding with a black coating. The Daisuke Nishida Funayuki has an octagonal walnut handle with a maple ring. The bolster is made of Macassar ebony wood. This knife cannot be washed in the dishwasher. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Daisuke Nishida knives due to handmade may differ slightly from those shown in the photos and sizes. Weight 240 gr.
137,10 €

In stock

Deba Couteau Japonais Ittetsu Forge-welded Shirogami 2 24cm IJF-15112
Large Deba knife by Ittetsu has 240 mm forge-welded blade made of Shirogami #2 carbon steel.  Weight is 700 g. The oval shaped handle is made of magnolia wood.  Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
282,26 €

In stock

Deba Couteau Japonais Ittetsu Forge-welded Shirogami 2 for left-handed 18cm IJF-15108L
 This Deba knife is made for left-handed. Knife has 180 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood.  Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
193,55 €

In stock

Deba Couteau Japonais Ittetsu Forge-welded Shirogami 2 for left-handed 18cm IJF-11108L
 Ittetsu Deba knife IJF-11108L with 180 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. The blade is single bevel and this model is made for left-handed. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
161,29 €

In stock

Deba Couteau Japonais Tojiro Zen 15.5cm FD-571
Traditional Deba. The essence of “Tojiro”, fusion of Japanese-style sticking to the keenness and Western-style. This is a standard series with basic functions of Japanese-style knives have been cultivated in their mind by working hard. Edging is the sharpness is the same as upper grade’s even if this is a standard series. Please feel Japanese knife culture close to you.
92,74 €

In stock

Deba Couteau Japonais Ittetsu Forge-welded Shirogami 2 18cm IJF-15108
 This Deba knife by Ittetsu has 180 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood.  Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
136,29 €

In stock

Deba Couteau Japonais Ittetsu Forge-welded Shirogami 2 16.5cm IJF-15107
 Ittetsu Deba knife with 165 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood.  Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
120,16 €

In stock

Deba Couteau Japonais Ittetsu Forge-welded Shirogami 2 15cm IJF-15106
 Ittetsu Deba knife with 150 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood.  Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
112,10 €

In stock

Deba Couteau Japonais Ittetsu Forge-welded Shirogami 2 21cm IJF-11110
The japanese kitchen knife Ittetsu Deba IJF-11110 with 210 mm polished blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
192,74 €

In stock

Deba Couteau Japonais Ittetsu Forge-welded Shirogami 2 24cm IJF-11112
The japanese kitchen knife Ittetsu Deba IJF-11112 with 240 mm polished blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
201,61 €

In stock

Deba Couteau Japonais Ittetsu Forge-welded Shirogami 2 18cm IJF-11108
The japanese kitchen knife Ittetsu Deba IJF-11108 with 180 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
112,90 €

In stock

Deba Couteau Japonais Ittetsu Forge-welded Shirogami 2 15cm IJF-11106
The japanese kitchen knife Ittetsu Deba IJF-11106 with 150 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
96,77 €

In stock

Couteau Japonais Ittetsu Uraoshi Ajikiri Stamped 12cm IJS-11102
Japanese kitchen knife Ittetsu Uraoshi Ajikiri IJS-11102 with 120 mm polished blade made of Shirogami #2 carbon steel. Ajikiri is used for small fish, meat and vegetable. The oval shaped handle is made of magnolia wood. The blade is single bevel Uraoshi. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
59,68 €

In stock

Couteau Japonais Ittetsu Uraoshi Ajikiri Stamped 10.5cm IJS-11101
Ajikiri is used for small fish, meat and vegetable. Also it's a paring knife in the can be used as a small paring knife. Japanese kitchen knife Ajikiri Ittetsu IJS-11101 with 105 mm polished blade made of Shirogami #2 carbon steel. The blade is single bevel Uraoshi. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
55,65 €

In stock

Deba Couteau Japonais Tojiro PRO SD for Left-Handed 16.5cm F-636L
With a VG10 as core steel, clad by 13-chrome stainless steel, Tojiro Pro SD Deba has achieved both professional sharpness and easy maintenance. Special version for left-handed. Followed by traditional Japanese wood handle, its handle is asymmetric D-shaped. It is hygienic all-stainless steel with tornado texture on one side that brings anti-slip effect and comfortably support your cooking. Weight 250 g. 
248,39 €

In stock

Deba Couteau Japonais Tojiro Aogami 18cm F-977
Tojiro Aogami Deba Knife with 180 mm blade. Blade is made from premium carbon steel Aogami, it has excellent sharpness and wear resistance. A bit of experience may necessary for re-sharpening, however holds very good edge retention. Handle made from Japanese magnolia wood, which has good water resistance and smooth surface. Water buffalo ferrule prevents blade from rattling and coming off. Affectionate back side with rounded edge. Weight of Tojiro Aogami Deba F-977 knife is 315 g. Deba is traditionally used to clean and fillet whole fish, but it is also commonly used for breaking down and dressing poultry and meats with small bones. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
308,87 €

In stock

Deba Couteau Japonais Tojiro Aogami 16.5cm F-976
Tojiro Aogami Deba Knife with 165 mm blade. Blade is made from premium carbon steel Aogami, it has excellent sharpness and wear resistance. A bit of experience may necessary for re-sharpening, however holds very good edge retention. Blade of Tojiro Aogami Deba F-976 is single bevel for right-handed. Handle made from Japanese magnolia wood, which has good water resistance and smooth surface. Water buffalo ferrule prevents blade from rattling and coming off. Affectionate back side with rounded edge. Weight of Tojiro Aogami Deba F-976 knife is 270 g. Deba is traditionally used to clean and fillet whole fish, but it is also commonly used for breaking down and dressing poultry and meats with small bones. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
263,70 €

In stock

Deba Couteau Japonais Sakai Takayuki Ajikiri Inox 12cm 04378
Japanese Sakai Takayuki Ajikiri  Inox knife with  12cm  blade. Ajikiri or Ko-Deba commonly used in coastal areas of Japan to fillet and butterfly small saltwater fish, particularly Aji (Japanese horse mackerel) - hence the alternative name of Aji-deba, or Aji-kiri. However, it is just as adept at dealing with small freshwater fish, such as trout. The Ko-deba is useful knife for home cooks that prefer to clean and fillet the smaller sizes of fish themselves, rather than buy fish which have already been filleted.  Blade is made chrome and molybdenum 8A stainless steel. Sakai Takayuki Inox knives are sharp and do not rust easily due to their special material. The U shaped magnolia handles and water buffalo bolsters are easy to grip and are comfortable in the hand, even through long hours of use.  This Sakai Takayuki Ajikiri knife is easy to sharpen and recommended for business and home use. 
72,58 €

In stock

Deba Couteau Japonais Tojiro Hammered Black 21cm F-1077
Traditional japan Deba. Hand made. In modern society, everything is rationalized and made efficient. However, workplaces of free hand forging are taking over traditional manufacturing process and everything has been processing by hand. Every single piece is made by hand and put craftsman’s skill in the every single process such as forging, edging and putting handle etc. They are all holy works to put their soul into knives. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
185,48 €

In stock

Deba Couteau Japonais Tojiro Zen 11.5cm FD-570
Traditional Mini Deba. The essence of “Tojiro”, fusion of Japanese-style sticking to the keenness and Western-style. This is a standard series with basic functions of Japanese-style knives have been cultivated in their mind by working hard. Edging is the sharpness is the same as upper grade’s even if this is a standard series. Please feel Japanese knife culture close to you.
77,42 €

In stock

Le couteau Deba est un couteau lourd utilisé pour vider et fileter le poisson. La plupart des debas sont à simple chanfrein, ce qui signifie que le couteau est affûté d'un seul côté et que l'arrière du couteau est plat. Traditionnellement, ils sont en acier au carbone, ce qui nécessite un entretien régulier et une huile pour éviter la rouille. De nos jours, le deba est également couramment utilisé pour découper et habiller la volaille et d'autres viandes contenant de petits os. Comme la cuisine japonaise utilise de nombreuses tailles et espèces différentes de poissons et de fruits de mer, il existe de nombreux types et tailles différentes de deba disponibles. Dans la boutique MyGoodKnife, vous pouvez acheter des couteaux deba des meilleures marques japonaises.