Cuchillos y Navajas Böker

For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
Boker’s reissue of the Applegate-Fairbairn Fighting Knife uses fiberglass-reinforced Delrin handle, thickened in the center for a sure grip. A lanyard hole adds convenience. The handle meets a short, forward-bending cross-guard that protects the fingers. Boker achieved the knife’s preferred rearward balance by inserting steel weights into the handle - a beautifully ergonomic design. The 6" blade on this 10¾" knife has effective reach, with a 1" wide blade that’s beefy all the way to the tip. Struck of Solingen 440C stainless steel hardened to a Rockwell of 58, the blade has the signatures of Rex Applegate and W.E. Fairbairn etched into the bead-blasted finish. Sheathed in Kydex with large Tek-Lok.

 El Böker TRPPR Madera de abedul rizada 112098 es un cuchillo de caballero excepcional que lleva el espíritu del exitoso  Böker Trapper a una nueva era. La virola larga del cuerpo del mango de titanio reinterpreta el espíritu nostálgico y convierte al TRPPR con sus cachas de mango de madera abedul rizado estabilizada y su veta única en un nuevo modelo de la cultura cuchillera contemporánea. La hoja con cojinete de bolas hecha de MagnaCut pulvimetalúrgico se abre con una aleta, mientras que el elegante bloqueo integral del marco con incrustaciones de acero inoxidable y tope de sobrecarrera asegura de manera confiable el cuchillo. El acero de la hoja utilizado se caracteriza sobre todo por una alta resistencia al desgaste, alta tenacidad y alta resistencia a la corrosión y se completa con un atractivo acabado en dos tonos. Con el clip de titanio (Tip-Up/r). Para protegerlo contra la suciedad y los arañazos, el Böker TRPPR se entrega en un estuche de fieltro de alta calidad. Hecho a mano en la fábrica Boker en Solingen.

En esta versión especial, la clásica Barlow Integral Canvas Micarta Black 111944 recibe una hoja O1 con stonewash a la piedra y mango de micarta. El cuchillo se entrega en un estuche de fieltro de alta calidad para guardarlo. Hecho a mano en la fábrica Boker de Solingen.

Trapper Uno Jute Micarta Negro 110042 de la marca Böker con un largo de hoja de 84 mm. El modelo Trapper es desde hace más de cien años un clásico atemporal en la línea de los fabricantes de cuchillos clásicos más famosos del mundo. En la versión tradicional, el modelo está equipado con refuerzo superior e inferior. El Uno no tiene refuerzos al final del mango y recibe su nombre de esta modificación. Las empuñaduras ligeras están fabricadas en micarta de yute negra y contrastan bien con el refuerzo de alpaca. La hoja está fabricada en acero 440C y no es fija. El cuchillo articulado, fabricado íntegramente a mano en la fábrica Boker de Solingen, se entrega en un estuche de fieltro de alta calidad. El cuchillo Böker Trapper Uno pesa 67 g.

La Böker Optima 113002 es una navaja de bolsillo para agarrar y usar. El sistema de cambio transforma el cuchillo de una pieza en una práctica herramienta multifuncional. El cuerpo del mango está sinterizado a partir de una pieza de alpaca, las cachas son de palosanto fino, certificado e importado. La hoja extraordinariamente fuerte hecha de 440C es inoxidable, está hueca y se puede bloquear de forma segura con el bloqueo trasero. 

El Böker TRPPR Micarta 112943 (pronunciado: Trampero) es un elegante cuchillo de caballero. El largo refuerzo del mango de titanio reinterpreta el espíritu nostálgico de la época y transforma el TRPPR con sus cachas de Micarta con su veta única en un nuevo modelo de la cultura cuchillera contemporánea. Los acentos decorativos los ponen el tornillo del eje de la hoja delantera, que presenta la famosa marca del árbol de Boker, y el clip de titanio (tip-up/r) fresado del macizo con una bola. La hoja con rodamiento de bolas de pulvimetalurgia MagnaCut se abre de forma suave como la seda mediante una aleta, mientras que el elegante framelock integral con incrustación de acero inoxidable y tope de carrera asegura el cuchillo de forma fiable. El acero para hojas utilizado se caracteriza sobre todo por su alta resistencia al desgaste, alta tenacidad y alta resistencia a la corrosión y se completa con un atractivo acabado bicolor. Para protegerlo de la suciedad y los arañazos, el Böker TRPPR se entrega en una bolsa de fieltro de alta calidad. Hecho a mano en la fábrica Böker de Solingen.
Disponible a partir del 31/10/2023

En el corazón del extraordinaria Navaja Böker 1969 Z28 Damasco 111101DAM se encuentra una distintiva hoja de Damasco de 80 capas, que fue forjada por Chad Nichols. En colaboración con el diseñador italiano Tommaso Rumici, se creó un "cuchillo musculoso" único que combina los rasgos distintivos del carácter del Camaro Z28 en forma y fuerza. El tirador de aluminio en "Le Mans Blue" interpreta las líneas de la carrocería de forma nostálgica y presenta emocionantes detalles.  Diseñador: Tommaso Rumici. Total 18,6 cm cl. 8cm, peso 99g. Hecho a mano en la fábrica Boker en Solingen.
Disponible a partir del 17/04/2023

La clásica Barlow consigue en esta versión especial Böker Integral Burlap Micarta Damast 110943DAM una hoja noble de damasco de 200 capas en el patrón Riple y mango finamente afinado con cachas de Micarta negra y marrón. Con su característica virola demasiado larga y su hoja más ancha, el cuchillo Slipjoint es, por un lado, un compañero pequeño y absolutamente adecuado para el bolsillo, pero por otro lado también es lo suficientemente grande como para manejar fácilmente la mayoría de las tareas de corte diarias. Se entrega en un estuche de fieltro de alta calidad para su almacenamiento. Hecho a mano en la fábrica Boker en Solingen.

Como EDC, la navaja Böker Scout Negro / Naranja 112091 tiene el tamaño perfecto y ofrece un paquete general atractivo con su apariencia de alta calidad en combinación con el alto rendimiento de corte. La hoja está hecha de acero inoxidable 4034, tiene un acabado de lavado a la piedra y contribuye a la apariencia incomparable del Scout con su forma memorable. Un bloqueo trasero clásico se hace cargo del bloqueo y mantiene la hoja abierta de forma segura. Tanto el cuerpo del mango negro como las relucientes escamas de G10 naranja le dan al clásico un toque moderno. Hecho a mano en la fábrica Böker en Solingen.

La modificación del legendario Boker Applegate-Fairbairn 120545, diseñado por William H. "Bill" Harsey, combina el cuchillo utilizado por muchas unidades de élite con elementos modernos. El mayor ancho de hoja y la geometría más favorable de la hoja 440C, que está rectificada en ambos lados, mejoran las propiedades de corte, mientras que la longitud de la hoja ofrece un compromiso óptimo entre manejo y utilidad. La espiga de la hoja que sobresale en el extremo del mango se puede utilizar, entre otras cosas, como rompecristales. Las cachas del mango de micarta de lona verde fresadas con CNC son extremadamente resistentes, agradablemente estructuradas y ofrecen un excelente agarre incluso cuando están mojadas. Se entrega con una funda negra especialmente diseñada por la marca Spec-Ops de EE. UU. La funda de muy alta calidad se puede colocar de forma multifuncional y tiene un amplio bolsillo frontal.

For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
This impressive Böker Trapper Uno Curly Maple O1 110297 escapes the gravity of conventional Pocketknives and takes knife lovers into its very own orbit. The design of the Slipjoint Knife is primarily characterized by the saber-bent blade made of O1, which is provided with a meteoric-looking Black Stonewash finish, as well as the radiant blue handle scales made of curly maple, which are reminiscent of the view of the earth from outer space. Adding sparkle are the nickel silver handle rivets that echo the glowing celestial bodies. The Pocketknife opens by nail hammer and does not lock. With felt pouch. Handmade in the Böker Manufactory Solingen.

For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
Created in cooperation with the young knifemaker Alex Kremer and Daily Customs, the Böker AK1 Damascus 122509DAM is a versatile small everyday knife which is not only completely convincing as an EDC but already enjoys cult status. The great success of the models with RWL-34 blade steel prompted  to design a high-end version. The new material Fat Carbon Space-Coral Silver sets a completely new accent. The cross-section of the pattern is rotated by 90° and the even spacing of the fine lines are arranged in ingeniously ordered chaos.
The blade is made of stainless Damascus by Chad Nichols in the Boomerang pattern. This creates a charming visual interplay between the materials, which also both have the best mechanical properties in their respective functions.The handle scales can be removed effortlessly with the included Torx key, so that the elaborately crafted lanyard hole at the end of the handle can be turned around when the handle scales are removed and optionally disappear into the handle. Supplied with a high-quality black leather sheath, which has a sewn-in Ulticlip and can be conveniently attached to the hem of the pocket thanks to the locking spring clip. This allows the Boker AK1 Damascus to be drawn effortlessly while the sheath is reliably held in place by the Ulticlip. Handmade in the Boker Knife Manufactory in Solingen.

For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
For the Böker Sherman EDC 110665 blade, Magnacut was used for the first time, which is not without reason glorified as “wonder steel”. Unlike the tool steels usually used, this steel was developed specifically for knife making. The three desirable properties of a steel - edge retention, toughness and rust resistance (stainless in the DIN category) - represent a conflict of goals. To make the steel rust-resistant, the addition of chromium is necessary, which makes the structure coarse, brittle and susceptible to fracture under normal conditions. High hardness, which has a positive influence on cutting durability, is usually achieved at the expense of toughness. With Magnacut, despite the high chromium content of 10.7% and an impressive hardenability of over 62HRC, it has been possible to achieve a very fine microstructure and thus high toughness and shock-load tolerance. The addition of nitrogen plays a central role here. Nitrogen is actually a steel pest in the alloy. However, due to sophisticated heat treatment, among other things, the nitrogen of the Magnacut is integrated into the crystalline lattice structure of the steel structure and thus achieves the otherwise contradictory material properties.

The central structural difference to the M4 Damascus model is the flipper, elegantly integrated into the contours, which allows the blade to slide open smoothly with a small impulse and invites you to play. The ball-bearing blade is opened alternatively by thumb stud and locked by a sturdy titanium framelock with stonewash finish. An overdrive stop acts as an over-extension protection for the lock. The milled titanium clip (tip-up/r) with a steel ball as well as the handle scales made of wild carbon fibre complete the harmonious overall picture.

A special highlight of the Boker Sherman EDC is the protruding backspacer made of Damascus, which is equipped with a lanyard hole in elongated slotted design. The Damascus of the backspacer was forged from various materials from the production of M4 Sherman tanks by Chad Nichols in the Customized Ladder pattern and is reminiscent of the tank tracks left in the ground by the heavy chains of the M4 Sherman.

For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
Böker Pocket folder has always been a very popular model for the proverbial vest pocket or the coin pocket of the jeans. The handle scales of the extremely lightweight pocket knife are made of native bog oak. The blade is made of hand-forged stainless Damascus by Chad Nichols from Mississippi. The Boomerang pattern is particularly effective on the short blade and, together with the dark handles and classic nickel silver bolsters, gives the knife an extremely noble appearance. The blade is locked by a classic backlock. Böker Pocket folder weight is 37 g.

In his designs, Ukrainian knifemaker Alexander Krava succeeds admirably in combining form and function at the highest level. Inspired by Koteyka, a virus with a cat as the figurehead, which is not taken entirely seriously by those familiar with the computer scene, the designer created the slipjoint knife of the same name Böker Plus Koteyka 01BO641. Three-dimensionally milled G10 handle scales with a velvety paw structure all the way to the back of the blade provide for an incomparable grip, while the D2 blade with a stonewash finish lies in wait and is only released on its prey from everyday cutting tasks with a quiet purr of the nail nick. Even without a locking mechanism, the blade is held securely by the taut spring between the stainless steel liners.It is not equipped with a clip or a lanyard hole, but with a lot of elegance and supplied with a classy nylon sheath.

The Böker AK1 Reverse Tanto Grenadill 127502, developed in cooperation with the young knifemaker Alex Kremer and Daily Customs, is a versatile small everyday knife that can be perfectly adapted to your own needs. The ergonomically shaped handle scales are made of certified imported grenadilla wood and are comfortable to hold. They can be easily dismantled using the torx-key supplied and can be replaced by a wide range of alternative scales developed and produced in conjunction with Daily Customs. In addition, the intricately manufactured lanyard hole at the end of the handle can be turned around when the handle scales are dismantled so that it disappears into the handle. It is made of RWL 34, just like the complete full tang, with minimal manufacturing tolerances. This means that the knife can be adapted to your own requirements in the shortest possible time and modified according to the situation. Supplied with a high-quality black leather sheath, which is provided with a sewn-in ulticlip and can be easily attached to the pocket hem thanks to the locking spring clip.  Handmade in the Boker Knife Manufactory in Solingen.

El Böker Daily AK1 Reverse Tanto CF 124502, desarrollado en colaboración con el joven cuchillero Alex Kremer y Daily Customs, es un pequeño cuchillo versátil para todos los días que se puede adaptar perfectamente a sus propias necesidades. Las cachas ergonómicas y cómodas del mango están hechas de carbono salvaje. fibra. Se pueden desmontar fácilmente con la llave torx suministrada y se pueden reemplazar por una amplia gama de básculas alternativas desarrolladas y producidas en conjunto con Daily Customs. Además, el orificio para cordón de fabricación compleja en el extremo del mango se puede girar cuando se desmontan las escalas del mango para que desaparezca en el mango. Está hecho de RWL 34, al igual que la espiga completa completa, con tolerancias de fabricación mínimas. Esto significa que el cuchillo puede adaptarse a sus propios requisitos en el menor tiempo posible y modificarse según la situación. Se suministra con una funda de cuero negro de alta calidad, que cuenta con un ulticlip cosido y se puede sujetar fácilmente al dobladillo del bolsillo gracias al clip de resorte de bloqueo. Hecho a mano en la fábrica de cuchillos Boker en Solingen.

La interpretación moderna y llamativa de Joe Mangiafico del diseño clásico del cuchillo Canoe 01BO494 convence con una hoja de punta caída con cojinete de bolas hecha de CPM-S-35VN con un acabado lavado a la piedra y un mango de titanio con un matiz azul. Mientras que los cuchillos Canoe históricos generalmente no tienen bloqueos de hoja, el Boker Plus Canoe con Titan Frame-Lock adopta un enfoque moderno en nombre del rendimiento intransigente, que representa el diseñador de cuchillos de EE. UU. Los acentos decorativos los ponen los elementos de bronce, como el tornillo del eje de la hoja, el perno para el pulgar y el clip de titanio (tip-up/r). El orificio para el cordón y la funda de nailon de alta calidad completan el equipo.

The handy Böker Plus Connector Titanium 01BO353 unmistakably bears the signature of the Polish knifemaker Jakub Wieczorkiewicz, who is now known throughout the world for his modern folders under his brand name Poltergeist Works. Full order books, perfect workmanship and individual implementation mean that his handcrafted pieces fetch top prices internationally. The Connector is a compact EDC with a ball-bearing Spearpoint blade made of CPM-S-35VN, which is opened by a removable thumb stud and reliably locked by a reinforced framelock. The handle scales made of high-strength titanium with a discreet beadblast finish and lie comfortably in the hand, while jimpings on the back of the blade increases work safety. Supplied with a decorative blade axle screw, a lanyard hole, a practical deep-carry clip (tip-up/r) and a high-quality nylon pouch for storage.

The handy Böker Plus Connector G10 01BO354 unmistakably bears the signature of the Polish knifemaker Jakub Wieczorkiewicz, who is now known throughout the world for his modern folders under his brand name Poltergeist Works. Full order books, perfect workmanship and individual implementation mean that his handcrafted pieces fetch top prices internationally. The Connector is a compact EDC with a ball-bearing Wharncliffe blade made of D2, which is opened by a removable thumb stud and reliably locked by a sturdy linerlock. The handle scales made of non-slip G10 with an impressive texturing always lie securely in the hand, while jimpings on the back of the blade additionally increases work safety. Supplied with a decorative blade axle screw, a lanyard hole, a practical deep-carry clip (tip-up/r) and a high-quality nylon pouch for storage.

Hardly any other Boker Plus pocket knife has been in such demand in recent years and appeared in so many variations as the Böker Plus Exskelibur I 01BO359 by Mike Skellern. With his design, the knifemaker from South Africa has established one of the most successful and popular series in the Boker Plus range. This particularly modern variant with a stainless steel framelock is once again significantly slimmer than the various linerlock versions and is convincing both in everyday use and in tougher applications. The textured front scales are made of olive green micarta and give the design, originally intended as a gentleman's knife, a rustic look. The Spearpoint blade made of D2 has a dark stonewash finish and thus further emphasises the outdoor character of the pocket knife. It is opened two-handed or by front flipper and reliably locked by the sturdy stonewash framelock. Supplied with a convertible clip (tip-up/tip-down) and a high-quality nylon case for storage.

Despite the more compact dimensions, the Folding knife Böker Plus Exskelibur II 01BO367 is in no way inferior to its big brother and shines with almost unchanged proportions.The textured front scales are made of olive green micarta and give the design, originally intended as a gentleman's knife, a rustic look. The Spearpoint blade made of D2 with a dark stonewash finish thus further emphasises the outdoor character of the pocket knife. It is opened by nail nick or front flipper and reliably locked by the sturdy stonewash framelock. Supplied with a convertible clip (tip-up/tip-down) and a high-quality nylon case for storage.

For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
Boker Savannah fixed is a professional hunting and outdoor knife with a massive blade and elegant lines. The design by Armin Stütz, from the Austrian knife forge SteirerEisen, was developed in collaboration with professional rangers based on intensive experience in big game hunting in South Africa. The solid blade has an exceptional two-tone finish and is made of the cobalt-alloyed N690. This high performance steel can handle any cutting task, and the full tang design of this piece provides extraordinary strength and stability. The handle scales of certified imported Cocobolo wood create a traditional look. Mounted stainless steel bolsters and a lanyard hole complete the model. A powerful and appealing companion for all outdoor activities. Comes with a high-quality leather sheath. Weight 190 g.

The high-quality Böker Leather Holster ED-Three Black 09BO295 holster made of the most impressive nubuck leather can hold up to three items and is characterised by an extremely high level of carrying comfort. The large main compartment holds a pocket knife with a handle length of up to 10 centimetres, while the other two compartments are also open in the lower area and offer enough space for a compact torch as well as a pen or tactial pen. The Böker leather holster ED-Three is designed for a belt width of up to 4.4 centimetres and can be worn on the right or left side. The embossed Boker tree mark emblem sets a discreet accent and elegantly rounds off the classy look of the black case.