Suehiro

Filter by
Categories
Price
Country
Filter
New
Suehiro Flattening stone 200 PL-150P
To ensure your sharpening stones last long and perform effectively, it's important to maintain a smooth surface. Due to the concentrated stress on the center section during sharpening, they are prone to uneven wear. This Suehiro 200-grit flattening stone (150 x 50 x 27 mm) is the ideal solution for restoring their geometry.
€21.51

In stock

New
Suehiro Flattening stone GNB-100
Sharpening stones wear unevenly over time, as the main pressure during sharpening is usually applied to the center of the stone. This flattening stone by Suehiro is designed to restore and level the surface of sharpening stones. Grit: 100. Dimensions: 245 × 105 × 30 mm.
€41.43

In stock

New
Sharpening stone Suehiro 180 SUE188
Suehiro sharpening stone, 180 grit. This coarse stone is suitable for initial sharpening and repairing chips. Dimensions: 208 x 65 x 30 mm. It does not come with a stand, so we recommend purchasing one separately for ease of use.
€39.04

In stock

New
Sharpening stone Suehiro Maido 6000 MG-6000-3
This special 6000-grit Suehiro whetstone is a limited edition product and will no longer be produced. The stone is manufactured using a cold-curing process using WA abrasives and magnesium oxide and aged for approximately 20 years. The result is a unique whetstone that delivers a perfect sharpening and is extremely wear-resistant compared to standard water stones. This 6000-grit whetstone is used for final sharpening and polishing the edge, removing small burrs, and giving the blade a very sharp and clean cut. For the sharpest possible finishing edge, we recommend using the Nagura stone slurry, which is also included in the kit. A plastic stand is also included. Due to the technology, uneven coloring and pattern variations are possible. Stone size: 182 × 60 × 10 mm.
€83.67

In stock

New
Sharpening stone Suehiro Maido 1000 MG-1000-3
This unique 1000-grit Suehiro whetstone is a limited edition. The stone is cold-cured from WA abrasives using magnesium oxide as a binder. Blanks were aged for 15-20 years. The result is a hard, "clean" working surface, providing a very pleasant and controlled sharpening experience. For the sharpest finishing edge, we recommend using Nagura stone slurry (an optional honing accessory). This unique Suehiro whetstone is highly wear-resistant and lasts longer than typical synthetic water stones, while maintaining a smooth and consistent feel. The quality of this product has been confirmed by high-temperature (100°C) and dry storage tests for synthetic abrasives. Due to extended storage at room temperature, color irregularities or patterns may appear on the surface; this does not affect the performance of the stone. The kit also includes a WA #500 Nagura stone for restoring the surface of the main stone. After use, it is recommended to clean the stone's surface and remove any moisture. Due to the technology involved, uneven coloring and pattern variations are possible. Stone size: 182 x 60 x 10 mm. An ABS plastic stand is also included.
€62.95

In stock

Suehiro Rust Eraser Set RDP-99
This Suehiro set for rust removal and mirror finishing. Includes water-resistant abrasive paper and superfine particle abrasive. Contents: Rust removing eraser,Green rouge, Superfine particle abrasive, Water-resistant abrasive paper #180, #400, #800, #1500(5 sheets each) ; Wood block; Detergent bottle; Spray bottle; 3 types of holders(Flat, Arched, Curved); Felt(2 sheets); Dry abrasive paper(Coarse, Medium 5 sheets each)
€54.98

In stock

Suehiro Dull / Glossy Finish Whetstone for Damascus knives KMR-188-S
This Suehiro whetstone set is used to restore the distinctive patterns on a blade that are lost over time due to constant sharpening and polishing. For final finishing, lightly sharpen the flat side, washer, etc., to cloud the soft iron and bring out the original patterns on the blade. Pay attention that it may be ineffective for decorative (printed) patterns.. Contents: Metal plate with rubber platform, Polishing powders(Medium grain/Fine grain), Mist bottle, Metal plate size 229×92mm(Surface). Package Size 220×305×46mm. Metal plate grit #600/#320.
€107.57

In stock

Suehiro Rubber whetstone holder No.38
Suehiro rubber whetstone holder fits to sharpening stones with length up to 21 cm. Dimensions: 290 x 75 x 25 mm. Suehiro makes high quality whetstones and accessories for sharpening in Japan.  
€20.72

In stock

Sharpening stone Suehiro Cerax 6000/1000 CR-4800
Sharpening stone Suehiro Cerax #1000/6000 can be used to sharpen all kind of knives, made of any type of steel, Japanese or not. This is a medium-hard stone, meaning it will quickly create a slurry during sharpening. Slurry is this paste-like, fresh "compound", full of abrasive grains, produced on the surface of the stones once we start sharpening. It will help us sharpen our knives faster. #1000 grit is a most common, general sharpening granulation (to put a new edge on a blunt knife), while #6000 grit is a fine granulation for the finishing edge and the final polish of the blade. The hole in the stone base allows to hang the stone to dry. And the bottom container, when filled with water, allows to wet the second stone before use. Comes with nagura. 
€55.65

In stock

Sharpening stone Suehiro 6000/1000 EKN183-B
Suehiro combination sharpening stone #1000/6000 can be used to sharpen all kind of knives, made of any type of steel, Japanese or not. This is a medium-hard stone, meaning it will quickly create a slurry during sharpening. Slurry is this paste-like, fresh "compound", full of abrasive grains, produced on the surface of the stones once we start sharpening. It will help us sharpen our knives faster. #1000 grit is a most common, general sharpening granulation (to put a new edge on a blunt knife), while #6000 grit is a fine granulation for the finishing edge and the final polish of the blade.  Comes with nagura and thin rubber base.
€39.04

In stock

Sharpening stone Suehiro Gokumyo 1500/400
Knife sharpening kit Suehiro Gokumyo. Limited edition. Made in Japan. Includes a double-sided silicone-based whetstone, grain size 1500 and 400 grit. Also included is a Nagura stone for making suspension #WA400. This set, including a whetstone, is suitable for sharpening Japanese and other kitchen knives.
€120.16

In stock

Suehiro, a Japanese waterstone manufacturer from Niigita province in Japan, has a long history of producing high quality, yet affordable ‘toishi’ (sharpening stones). For many years now, they have produced an outstanding range of sharpening stones and continue to produce them today. Quality is of utmost importance to Suehiro and that is made evident in his sharpening stones.