Couteaux Ittetsu

Sujihiki Ittetsu Tadafusa OEM Aogami 2 ISN-11 knife with 27 cm blade. The blade is made of Aogami #2 with stainless steel clad, Nashiji finnish. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance. Handle is made of walnut. This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 440 gr.

The perfect Gyuto  Aogami 2 S/S Clad ISW-16 from Ittetsu knife with a 18 cm blade for any task in the kitchen. Octagonal handle is made of walnut. The bolster is made of Macassar ebony. The blade is made of Aogami #2 with stainless steel clad, Nashiji finnish. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance.  This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 345 gr.

Gyuto IWZ-105 from Ittetsu is a Japanese-designed chef's knife with a blade length of 24 cm, designed for chopping and slicing meat, fish, fruits and vegetables. The octagonal handle is made of pakkawood wood. The blade is made of high quality VG10 Damascus steel, hammer finish. This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 270 gr.

The perfect Gyuto Ittetsu Tadafusa OEM Aogami 2 S/S Clad ISN-15 knife with a 24 cm blade for any task in the kitchen. Handle is made of walnut. The blade is made of Aogami #2 with stainless steel clad, Nashiji finnish. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance.  This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 450 gr.

Tall gyuto chef knife with a wide 60x210 mm blade. Weight 440 g. This kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.

Tall bunka knife with a wide 60x210 mm blade. Weight 450 g. This kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.

Tall bunka knife with a wide 57x180 mm blade. Weight 400 g. This kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.

 Usuba knife with 180 mm forge-welded blade made of Shirogami #2 carbon steel. Weight is 400 g. Usuba is a traditional Japanese knife for slicing vegetables. Unlike nakiri, usuba is a single-beveled knife. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.

 Usuba knife by Ittetsu has 165 mm forge-welded blade made of Shirogami #2 carbon steel. Weight is 310 g. Usuba is a traditional Japanese knife for slicing vegetables. Unlike nakiri, usuba is a single-beveled knife. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.

 This sushi knife by Ittetsu has 210 mm forge-welded blade made of Shirogami #2 carbon steel. Weight is 350 g. The oval shaped handle is made of magnolia wood.  Yanagiba knives are primarily used to slice boneless fish fillets for Sashimi and Sushi dishes. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.

 This Yanagiba knife by Ittetsu has 180 mm forge-welded blade made of Shirogami #2 carbon steel. Weight is 310 g. The oval shaped handle is made of magnolia wood.  Yanagiba knives are primarily used to slice boneless fish fillets for Sashimi and Sushi dishes. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.

Large Deba knife by Ittetsu has 240 mm forge-welded blade made of Shirogami #2 carbon steel.  Weight is 700 g. The oval shaped handle is made of magnolia wood.  Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.

 This Deba knife is made for left-handed. Knife has 180 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood.  Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.

 Ittetsu Deba knife IJF-11108L with 180 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. The blade is single bevel and this model is made for left-handed. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.

Ittetsu Honesuki Tadafusa OEM knife with 15 cm blade. Honesuki is specifically designed for de-boning and breaking down poultry, but is also capable of filleting fish or meat and carrying out many tasks. Blade is made of Aogami 2 steel. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance. Handle is antibacterial bubinga. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 

 This Yanagiba knife by Ittetsu has 270 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood.  Yanagiba knives are primarily used to slice boneless fish fillets for Sashimi and Sushi dishes. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.

 Yanagiba knife by Ittetsu has 240 mm forge-welded blade made of Shirogami #2 carbon steel. Yanagiba knives are primarily used to slice boneless fish fillets for Sashimi and Sushi dishes. The oval shaped handle is made of magnolia wood.  Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.

 This Deba knife by Ittetsu has 180 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood.  Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.

 Ittetsu Deba knife with 165 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood.  Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.

 Ittetsu Deba knife with 150 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood.  Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.

Ittetsu Garasuki Tadafusa OEM knife with 18 cm blade. Garasuki is a larger version of the Honesuki knife, also used for poultry but just bigger birds. The k-tip allows for precision while the longer blade allows for an easier slicing action. Blade is made of Aogami 2 steel. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance. Handle is antibacterial bubinga. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 

The japanese knife Ittetsu Yanagiba Forge-welded Shirogami 2 for left-handed IJF-11125L with 270 mm blade. Handle is made from magnolia and has good water resistance. Forge-welded blade is made of Shirogami #2 carbon steel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. This knife has a bevel on only one side of the blade, to help achieve even slices. Ittetsu knives are handmade in Echizen city, Japan.

The japanese knife Ittetsu Yanagiba Forge-welded Shirogami 2 for left-handed IJF-11124L with 240 mm blade. This knife has a bevel on only one side of the blade, to help achieve even slices. Handle is made from magnolia and has good water resistance. Forge-welded blade is made of Shirogami #2 carbon steel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. Ittetsu knives are handmade in Echizen city, Japan.

The japanese knife Ittetsu Yanagiba Forge-welded Shirogami 2 for left-handed IJF-11123L with 210 mm blade. Handle is made from magnolia and has good water resistance. This knife has a bevel on only one side of the blade, to help achieve even slices. Forge-welded blade is made of Shirogami #2 carbon steel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. Ittetsu knives are handmade in Echizen city, Japan.