Filtra per
Prezzo
€ €
Produttori
Lunghezza lama, mm
Paese
Acciaio
Maniglia
Collezione
Durezza
Fodero
Chiusura
Filtro
Coltello da tasca Kanekoma Higonokami Aogami Hammered XL 9.5cm AO-HX
Coltello tascabile Higonokami con manico in ottone. La lama forgiata, lunga 9,5 cm, è realizzata in acciaio Aogami. Nagao Kanekoma produce coltelli pieghevoli Higonokami tradizionali giapponesi da oltre 100 anni. Questo coltello tascabile pesa circa 70 g.
54,98 €

In magazzino

Coltello da tasca Kanekoma Higonokami Aogami Kaba XL 9.5cm AO-KXB
Higonokami pocket with handle made of brass with wood sticker. The 9.5 cm blade is made of Aogami steel. Nagao Kanekoma manufacturers traditional Japanese Higonokami folding knives over 100 years. This pocket knife weights about 75g.
78,88 €

In magazzino

Coltello da tasca Kanekoma Higonokami Aogami Kaba L 8cm AO-KLB
Il tradizionale coltello pieghevole giapponese Higonokami presenta un manico in ottone con guancetta in legno, che gli conferisce un aspetto classico e una presa comoda. La lama, lunga 8 cm, è realizzata in acciaio Aogami (acciaio della carta blu), un acciaio ad alto tenore di carbonio rinomato per la sua elevata durezza, l'eccellente tenuta del filo e le superiori proprietà di taglio. Come ogni acciaio al carbonio, l'Aogami richiede cura: dopo l'uso, si consiglia di asciugare la lama e di conservarla in un luogo asciutto.
Nagao Kanekoma produce coltelli Higonokami originali da oltre un secolo, mantenendo il design tradizionale e l'assemblaggio a mano. Il coltello non ha un blocco tradizionale: la lama rimane aperta per attrito e grazie alla caratteristica leva chikiri, risultando leggero, affidabile e pratico per l'uso quotidiano. Con un peso di circa 65 grammi, è praticamente impercettibile in tasca ed è ideale per le attività di tutti i giorni, i viaggi e i lavori all'aperto.
70,92 €

In magazzino

Coltello da tasca Kanekoma Higonokami Aogami Kaba XL 9.5cm AO-KX
Higonokami pocket with handle made of brass with wood sticker. The 9.5 cm blade is made of Aogami steel. Nagao Kanekoma manufacturers traditional Japanese Higonokami folding knives over 100 years. This pocket knife weights about 75g.
78,88 €

In magazzino

Coltello da tasca Kanekoma Higonokami Aogami Kaba L 8cm AO-KL
Coltello tascabile Higonokami con manico in ottone e inserto in legno. La lama da 8 cm è in acciaio Aogami. Nagao Kanekoma produce coltelli pieghevoli Higonokami tradizionali giapponesi da oltre 100 anni. Questo coltello tascabile pesa circa 65 g.
70,92 €

In magazzino

Coltello da tasca Kanekoma Higonokami VG-10 5.3cm VG-SCP
Higonokami is a traditional Japanese folding knife designed for everyday use. The blade is made of VG-10 premium steel. This version of Higonokami knife made by Nagao Kanekoma has a stainless steel handle. According to tradition, the knife does not have locking mechanisms, and the reliable fixation of the blade in the open state is ensured solely by the force of friction. Experience history personally with the Kanekoma Higonokami folding knife.
39,04 €

In magazzino

-14,00 €
Coltello da tasca 310 - Cold Steel Tiger Claw 7.6cm 22C
Cold Steel Tiger Claw karambit is created by celebrated custom-knife maker Andrew Demko. The blade was designed following Andrew Demko's extensive testing and experimentation as a journeyman electrician and engineer. When making his own multi-purpose handmade work knives, he made his own karambit/hawkbill hybrid blade that could cut rope, cable, wire and anything else his vocation threw in his path.
Replicating Andrew's original blade design but in premium S35VN stainless steel, the Tiger Claw offers the tactical cutting and slashing performance of the Filipino and Indonesian fighting karambit with the utility and function of a working man's hawkbill.
With the patented Demko thumb-plate, the Tiger Claw offers a fully ambidextrous fast draw from the pocket either in a saber grip or a traditional blade-down karambit grip, deploying the blade with lightning fast ease!
Made with his signature minimalist style, Demko's Tiger Claw features a slimline CNC machined US G10 handle, a matte black aluminum ring and perhaps most excitingly of all, the locking system! The uniquely modified Tri-Ad locking system features all of the strength, reliability, and performance of the world famous Tri-Ad lock, but with fully ambidextrous one-handed forward release opening - making this knife a breeze to open and close with one hand regardless of how you choose to carry or deploy it! Weight 5.1 oz (145 g).
118,19 €
132,19 €

In magazzino

Coltello da tasca Cold Steel Ti-Lite 35VN 15.2cm 26B6
This Cold Steel Ti-Lite has 35VN blade and CNC milled 7075 Aluminum handles which are finished with a protective EDP (Electric Discharge Plating) coating. The Ti-Lites are equipped with patent pending, stainless steel leaf spring locks (proven, in Cold Steel tests, to hold upwards of 145lbs). For ease of carry, the Ti-Lites comes equipped with a pocket clip, and can be opened rapidly by using the thumb studs or by snagging a quillon on the edge of your pocket as you draw your knife out.
156,18 €

In magazzino

-16,00 €
Coltello da tasca Cold Steel AD-15 Nero 8.9cm 58SQB
Il Cold Steel AD-15 58SQB è probabilmente il coltello tattico pieghevole più comodo dell'azienda. La lama è realizzata in acciaio in polvere S35VN. L'esclusivo manico ibrido dell'AD-15 è ciò che distingue questo coltello. La parte inferiore del manico presenta guancette in G-10 testurizzato abbinate a rivestimenti in acciaio. La parte superiore del manico, nota come "rocker", è realizzata in alluminio 6061 lavorato in 3D e funge da affidabile blocco Scorpion Lock, nascondendo una potente molla di compressione. Tenuto saldamente in posizione dalla pressione costante della molla e supportato da una presa salda, l'AD-15 è praticamente indistruttibile!
188,00 €
204,00 €

In magazzino

-11,13 €
Coltello da tasca Cold Steel Ti-Lite Zytel 6″ 15.2cm 26SXP
This Cold Steel Zy-Ex Ti-Lite with a 6 inch blade has a glass filled Zy-Ex handle. 15 cm blade is made of AUS8 steel. These lightweight knives are remarkably strong, sharp and good looking, at a price almost everyone can afford.
56,57 €
67,70 €

In magazzino

Coltello da tasca Cold Steel Grik 7.6cm 28E
Folding knife Cold Steel Grik is 3.88" closed. Knife has 3" satin finish AUS-8 stainless distinctive modified spear point blade and black textured GRN handle. Thumb stud. Includes OD green GRN handle scale.
42,15 €

In magazzino

Coltello da tasca Cold Steel Kudu 10.8cm 20KK
In South Africa, an inexpensive ring lock folder is sold everywhere. It's a good design, but it's constructed from sub-standard materials, is poorly made, and is horribly overpriced. And yet, millions of these knives are sold there each year. Well, we thought we could do better, in the quality of materials, cutting performance, and in price. The Cold Steel Kudu, takes some cues from its South African competition, but our version is vastly superior. Ours has a German 4116 Stainless steel flat ground blade, heat treated to Rc 56-57 for better edge holding ability and ease of re-sharpening, and a thin razor sharp edge. For safety, we have thoroughly tested the locking mechanism and are well satisfied it will hold the blade rigidly open until you decide to close it by pulling up on the ring attached to the back spring. The handle of the Kudu also reflects our dedication to making an effective and affordable folder. It's made of 43% glass reinforced Zy-Ex®. This material has proven to be extremely strong, and is stiff enough to complement the blade and spring when locked open. Plus, the gripping surface has a wood grain texture for traction and features an attractive polished steel Kudu horn emblem for a little extra flair! We think the Kudu represents an unbelievable value. It’s ready for anything and makes a wonderful work knife, utility knife, bait knife, or hunting knife.
14,34 €

In magazzino

Coltello da tasca Cold Steel Ranch Boss II 10.1cm 20NPM1
New Cold Steel Ranch Boss II 20NPM1 can meet just about any challenge your work can dish out! Designed from the ground up for usefulness, durability and effectiveness, it offers a long, sharp, clip point blade that's flat ground out of high carbon steel. Honed razor sharp it folds up into an equally tough handle. Made with faux sawed bone handle scales, and reinforced with tough stainless steel bolsters, it will outlast nearly any brass frame folding knife. What's more, it comes with a stiff back spring (like a slip joint pocket knife) and a stainless steel liner lock, so your fingers will have extra protection. It's paired with a thick brown leather belt sheath, making the whole package an incredibly affordable bargain.
50,20 €

In magazzino

Multi-strumento Victorinox Spartan Silver tech 1.3603.T7
Victorinox Spartan transparent  Silver is a medium pocket knife with nice ABS scales. Spartan model offers 12 practical functions. No matter where you go, this pocket knife will follow. Weight is 59 g. Size is 91 mm.  Tools are: 1. large blade 2. small blade 3. can opener 4. crewdriver 3 mm 5. bottle opener 6. screwdriver 6 mm 7. wire stripper 8. reamer, punch and sewing awl 9. corkscrew 10. toothpick 11. tweezers 12. key ring
31,45 €

In magazzino

-6,50 €
Coltello da tasca Ontario Rat-1 9cm 8848
Il RAT Modello 1 Nero è un superbo modello di Randall's Adventure & Training, prodotto da Ontario Knife Company (OKC). Questo coltello è progettato per offrire comfort e prestazioni, con una scanalatura per l'indice sull'impugnatura per mantenere la mano nella posizione corretta e una zigrinatura sul dorso della lama per un taglio controllato. L'impugnatura presenta guancette in nylon 6 grigio testurizzato con telaio liner lock in acciaio a struttura aperta. La lama drop point in acciaio inossidabile AUS-8 ha una finitura satinata e un filo liscio. Il RAT Modello 1 è completamente ambidestro, con doppi perni per il pollice e una clip da tasca reversibile a 4 vie. L'Ontario RAT Modello 1 è un coltello robusto e di alta qualità a un prezzo incredibile!
46,09 €
52,59 €

In magazzino

-35,00 €
Coltello da tasca Zero Tolerance Large Sinkevich Carbon Fiber 10.4cm 0452CF
The original Zero Tolerance 0454 was an award-winning collaboration between ZT and custom knife designer Dmitry Sinkevich. But it was also a very Limited Edition knife.
To make this amazing knife more readily available, ZT has created a new-for-2015 version based on the original’s streamlined form and high-performance function. The 0452CF is the same size as the original 0454, but with a carbon fiber front scale and S35VN dual-finished blade. S35VN sharpens to a razor edge, holds it, and can be resharpened easily. The 0452CF opens as smooth as butter with the KVT ball-bearing opening system and built-in flipper. A titanium frame lock with hardened steel lockbar insert ensures solid lock up
As a final touch of class, the 0452CF features handsome 5-spoke pivot hardware. From office to outdoors, the 0452CF is ready to go wherever you're ready to take it.
251,00 €
286,00 €

In magazzino

Coltello da tasca Ontario RAT-1 D2 Tan 9cm 8867TN
This model features a durable D2 tool steel blade with a satin finish and an Tan handle. The RAT Model 1 is a superb design from Randall's Adventure & Training that is manufactured by Ontario Knife Company (OKC). This knife is designed for comfort and performance with an index finger groove on the handle to keep your hand where it should be and jimping on the spine of the blade for controlled cutting. The handle features textured tan nylon 6 scales with an open-built steel liner lock frame. The RAT Model 1 is fully ambidextrous with dual thumb studs and a 4-way reversible pocket clip. The Ontario RAT Model 1 is a strong, high-quality knife at an unbelievable price!
64,54 €

In magazzino

Coltello da tasca Ontario RAT-2 Black AUS8 OD Green 7.6cm 8861OD
This RAT Model II has a textured OD green nylon handle and a black finished AUS-8 stainless steel blade with a plain cutting edge. Blade length is 76 mm. Weight is about 84 g. If you like the Ontario RAT Model 1, but want something a little less bulky, then you'll love the Model 2. The RAT Model II is smaller, but retains the same great shape and performance of the original. The handle features textured nylon 6 scales with an open-built steel liner lock frame. The RAT Model 2 is fully ambidextrous with dual thumb studs and a 4-way reversible pocket clip.
49,40 €

In magazzino

Coltello da tasca Ontario Rat-1 D2 Black 9cm 8867
The RAT Model 1 features a durable D2 tool steel blade with a satin finish and a plain edge. RAT knife is a superb design from Randall's Adventure & Training that is manufactured by Ontario Knife Company (OKC). Blade length is 90 mm. This knife is designed for comfort and performance with an index finger groove on the handle to keep your hand where it should be and jimping on the spine of the blade for controlled cutting. The handle features textured black nylon 6 scales with an open-built steel liner lock frame. The D2 stainless steel drop point blade has a satin finish and a plain cutting edge. The RAT Model 1 is fully ambidextrous with dual thumb studs and a 4-way reversible pocket clip. The Ontario RAT Model 1 is a strong, high-quality knife at an unbelievable price!
64,54 €

In magazzino

Coltello da tasca Ontario Rat-1 OD Green 9cm 8848OD
The RAT Model 1 is a superb design from Randall's Adventure & Training that is manufactured by Ontario Knife Co. This knife is designed for comfort and performance with an index finger groove on the handle to keep your hand where it should be and jimping on the spine of the blade for controlled cutting. The handle features textured OD green nylon 6 scales with an open-built steel linerlock frame. The AUS-8 stainless steel drop point blade has a satin finish and a plain cutting edge. The RAT Model 1 is fully ambidextrous with dual thumb studs and a 4-way reversible pocket clip. The Ontario RAT Model 1 is a strong, high-quality knife at an unbelievable price!
52,59 €

In magazzino

Coltello da tasca Hogue X5 8.9cm 34579
The Hogue X5 is a stylish pocket knife, designed by Allen Elishewitz. Knife can be opened by flipper. For locking there are used a button lock holds the blade in place. Handle materials are matte Black 6061-T6 Hard Anodized Aluminum with G-Mascus® Black G10 Inserts. The blade is made of CPM154 steel.
262,95 €

In magazzino