Filtra per
Prezzo
Produttori
Lunghezza lama, mm
Paese
Acciaio
Maniglia
Collezione
Durezza
Fodero
Chiusura
Filtro
Coltello da tasca Böker Plus Cataclyst Brown Damascus 7.8cm 01BO479DAM
As a combination of a modern EDC and a high-quality gentleman's knife, the Böker Plus Cataclyst Brown Damascus 01BO479DAM also convinces in the Damascus variant with 110 layers all along the line. The sturdy blade opens on ball bearings via a flipper and has a flat grind and a groove on both sides. It is reliably locked in place by a reinforced framelock. Jimpings in the thumb rest area and on the backspacer further increase safety at work. The straight-lined construction is equipped with a front grip made of three-dimensionally milled Micarta, which is finished in a light brown. The framelock and the deep-carry clip (tip-up/r), which is also three-dimensionally milled from the solid, have a satin finish. Equipped with a lanyard hole and a high-quality nylon sheath for storage.
92,43 €

Spedizione dopo 10-20 giorni lavorativi

Coltello da tasca SOG Salute Mini Black Oxide 7.9cm FF1101CP
Folding knife SOG Salute Mini Black Oxide FF1101CP has 7,9 cm long blade made of 8Cr13MoV steel. That knife is smaller version of SOG Salute. Handle of the Salute Mini made of G-10. Knife has pocket clip.
33,86 €

In magazzino

Ka-Bar Folding Hunter Red 7.6cm 4062RD
The Ka-Bar Folding Hunter Red 4062RD has black finish AUS-8 stainless drop point blade. Kelly green Zytel handle. The model has a thumb stud, lanyard hole and pocket clip. Designed by Bob Dozier. 
29,03 €

In magazzino

Coltello da tasca Laguiole en Aubrac with corkscrew Horn 12cm L0612PCI/FSI1
The folding knife Laguiole en Aubrac L0612PCI/FSI1 with corkscrew has original handle made of horn. The traditional Laguiole shape is native to the Aveyron village of the same name. The Laguiole knives are distinguished by their characteristic curved shape. The bolsters are made of stainless steel. The length knife closed: 120 mm long.  It is 100% made in France, designed by passionate and qualified craftsmen. 
177,42 €

In magazzino

Coltello da tasca Laguiole en Aubrac Ivory 12cm L0312CII/FSI1
This beautiful Laguiole en Aubrac Ivory L0312CII/FSI1 knife is a perfect example of what an authentic Laguiole knife should look like. The traditional Laguiole shape is native to the Aveyron village of the same name. The Laguiole knives are distinguished by their characteristic curved shape. The bolsters are made of stainless steel. The length knife closed: 120 mm long.  It is 100% made in France, designed by passionate and qualified craftsmen. 
313,71 €

In magazzino

Coltello da tasca Laguiole en Aubrac Vinestock 12cm L0812CVI/FSB1
The perfect folding knife Laguiole en Aubrac Vinestock L0812CVI/FSB1 has original handle made of wood. The traditional Laguiole shape is native to the Aveyron village of the same name. The Laguiole knives are distinguished by their characteristic curved shape. The bolsters are made of stainless steel. The length knife closed: 120 mm long.  It is 100% made in France, designed by passionate and qualified craftsmen. 
225,81 €

In magazzino

Coltello da tasca Laguiole en Aubrac Turquoise Acrylic 12cm L0212PTIFSI1
 This beautiful Laguiole en Aubrac Turquoise Acrylic L0212PTI/FSI1 knife is a perfect example of what an authentic Laguiole knife should look like. The Laguiole knives are distinguished by their characteristic curved shape. The bolsters are made of stainless steel. Conveniently stores in the included pouch. The length knife closed: 120 mm long. Knife comes with a gift box.  Made in the village of Espalion -historic zone of Laguiole-, France.
173,39 €

In magazzino

Coltello da tasca Laguiole en Aubrac Woodstock 12cm L0212WSI/FSB1
The folding knife Laguiole en Aubrac Woodstock L0212WSI/FSB1 has original handle made of several woods (olivewood, ebony, juniper). The traditional Laguiole shape is native to the Aveyron village of the same name. The Laguiole knives are distinguished by their characteristic curved shape. Conveniently stores in the included pouch. The bolsters are made of stainless steel. The length knife closed: 120 mm long. It is 100% made in France, designed by passionate and qualified craftsmen.
125,00 €

In magazzino

Coltello da tasca Böker Tiger-Damascus 8.5cm 111103DAM
The straight-edged Böker Tiger-Damascus 111103DAM is equipped with a unique damascus blade made from the steel of the battle tank destroyed at Bauska. The non-stainless mosaic damascus is forged for us by hand by Chad Nichols in the Intrepid pattern and is reminiscent of the tank tracks left in the ground by the Tiger's heavy tracks. Unlike conventional damascus, the production of mosaic damascus does not create layers, but complex damascus bars are forged by hand into a mosaic in an elaborate and very complicated process. The ball-bearing blade is opened by a thumb stud and locked by a sturdy steel framelock with a stonewash finish, while a Hinderer lock-stop acts as an over-extension protection for the lock. The overall shape of the knife pays homage to the famous lines of the tank, while the decorative pivot screw is modelled on the main drive sprocket. The slightly contoured handle scales made of burlap micarta are provided with precisely milled grooves, which are reminiscent of the characteristic surface structure of the Zimmerit coating of German armoured vehicles. With lanyard hole and milled clip (tip-up/r) with steel ball. Handmade in the Boker Knife Manufactory in Solingen. Supplied with a classy suspended display, a certificate of authenticity and an individual serial number.
417,56 €

Spedizione dopo 10-20 giorni lavorativi

Coltello da tasca Steel Will Modus Grey 7cm F25M-14
Folding knife Steel Will Modus Grey F25M-14 has 7 cm blade made of D2 steel. It is bright, interesting, and light assistant for any tasks EDC knife might face. Handle made of FRN. Total length of the knife is 17cm. Modus has pocket clip.
40,24 €

In magazzino

Coltello da tasca Steel Will Censor Spear Point 8.9cm F13-A1B
Folding knife Steel Will Censor Spear Point F13-A1B has 8,9 cm blade made of D2 steel. Since one of the most popular Steel Will models Censor had been released, there've been a lot of inquiries in regards to a folding option of this knife. And now we are ready to introduce you to F13 Censor – a folding blade bearing ideology of its' forerunner. And the succession is seen in every detail: the same blade shape, the same half-pistol shaped handle, which helps to grip a knife intuitively right, the same inlaid handle patter, the same breaker on the handle. The only difference is that now all those features are presented in a more compact folding flipper knife with a speedy opening. Handle made of FRN.
56,37 €

In magazzino

Coltello da tasca Steel Will Censor Clip Point 8.9cm F13-A3B
Folding knife Steel Will Censor Clip Point F13-A3B has 8,9 cm blade made of D2 steel. Since one of the most popular Steel Will models Censor had been released, there've been a lot of inquiries in regards to a folding option of this knife. And now we are ready to introduce you to F13 Censor – a folding blade bearing ideology of its' forerunner. And the succession is seen in every detail: the same blade shape, the same half-pistol shaped handle, which helps to grip a knife intuitively right, the same inlaid handle patter, the same breaker on the handle. The only difference is that now all those features are presented in a more compact folding flipper knife with a speedy opening. Handle made of FRN.
56,37 €

In magazzino

Coltello da tasca Steel Will Avior Red 8.9cm F62-05
Folding knife Steel Will Avior Red F62-05 has 8,9 cm blade made of D2 steel. The main characteristic of F62 Avior is its’ composition with a flipper put to the front. Due to this peculiarity and ceramic ball-bearings used, the knife has a really great flipping action - fast and smooth. Ergonomic G10 handle with finger hollows and evident choil allow for a comfortable grip of any kind - both during a hard work as well as when work should be precise and accurate.
52,34 €

In magazzino

Coltello da tasca Steel Will Onrush 9.4cm SW612
Folding knife Steel Will Onrush SW612 has 9,4 cm blade made of N690Co steel. Onrush is perfectly suit to be your EDC knife. It has textured G10 handle with pocket clip. Made in Italy. 
160,48 €

In magazzino

Coltello da tasca Steel Will Warbot 8.9cm F10-033S
Serrated folding knife Steel Will Warbot F10-033S has 8,9 cm blade made of D2 steel. Warbot is made for heavy duty and special tasks, and that could be seen in each its’ element: the flipper not only functioning to flip open the knife, but as a guard as well ensuring a reliable rest and a safe holding even in wet or weak hands; ergonomic G10 handle allowing for use in any grip without sacrificing comfort or grip reliance; glass breaker on the back of the handle, which could be removed in case it’s not needed and be replaced with a hidden screw (a special tool to remove the glass breaker is included); a solid design on washers and two full-sized liners guaranteeing overall steadiness of the knife, so it is able to assist the owner in any situation. Warbot clip allows for a deep and firm carry in the pocket.
95,97 €

In magazzino

Coltello da tasca Steel Will Warbot 8.9cm F10-03
Folding knife Steel Will Warbot F10-03 has 8,9 cm blade made of D2 steel. Warbot is made for heavy duty and special tasks, and that could be seen in each its’ element: the flipper not only functioning to flip open the knife, but as a guard as well ensuring a reliable rest and a safe holding even in wet or weak hands; ergonomic G10 handle allowing for use in any grip without sacrificing comfort or grip reliance; glassbreaker on the back of the handle, which could be removed in case it’s not needed and be replaced with a hidden screw (a special tool to remove the glassbreaker is included); a solid design on washers and two full-sized liners guaranteing overall steadiness of the knife, so it is able to assist the owner in any situation. Warbot clip allows for a deep and firm carry in the pocket.
95,97 €

In magazzino

Coltello da tasca Fox Knives El Capitan 10cm SK-02 BSW
With this new pocket knife, El Capitan, Fox Knives together with Tommaso Rumici and Summit Knife, take the lead. Thanks to its robust construction and the D2 steel blade, this pocket knife is suitable for all jobs. The knife offers safe use thanks to the large thumb opening and frame-lock. Fox El Capitan weighs 182 g.
221,77 €

In magazzino

Coltello da tasca Fox Knives Shadow 10cm FX-533 TI
Fox Knives Shadow FX-533 TI folder is result of common job with Bastinelli Knives. Therefore Shadow is a high-end tactical flipper in their signature style. Instantly recognizable as a Bastinelli design, the dramatic blade is a modified Wharncliffe with a high primary grind. A long fuller and swedge add visual flair while enhancing the capabilities of this stunning blade. This style ensures slicing and piercing performance are at the forefront of the Shadow’s capabilities, with just enough belly to add a little versatility into the mix. ELMAX steel means you get a long lasting edge and excellent rust-resistance. A blackened stonewash finish helps hide wear and further enhances the stain-resistance of this Swedish-made premium steel. The framelock features a steel insert on the lock face to increase the longevity and consistency of the lockup. The Shadow rides on a titanium frame that matches the blade finish and features wide cutouts for comfort in the hand. The same flipper that opens the knife provides a large finger guard when open. This combined with the grooved surface of the titanium ensures protection for your hand during use. Fox Knives Shadow FX-533 TI folding knife weighs 140 g.
277,42 €

In magazzino

Coltello da tasca SOG Salute Mini 7.9cm FF0101CP
Folding knife SOG Salute Mini FF0101CP has 7,9 cm long blade made of 8Cr13MoV steel. That knife is smaller version of SOG Salute. Handle of the Salute Mini made of G-10. Knife has pocket clip.
33,86 €

In magazzino

-20,00 €
Coltello da tasca 310 - Cold Steel Large Espada Lockback 13.9cm 62MB
Folding knife Cold Steel Large Espada Lockback 62MB with 13,9cm blade made of S35VN steel. These mega-folders took the market by storm! A design collaboration between custom knife maker Andrew Demko and Cold Steel President Lynn C. Thompson, the Espadas are available in two sizes to suit both the bold and the boldest of individuals! Despite their imposing size, the Espada is expertly designed to fit comfortably and discreetly in your pocket. You’ll soon forget that you are carrying such a large and impressive blade. Equipped with the patented Demko Thumb Plate, the Large and Extra Large Espadas can be snagged on your pocket, opening the knife as you draw it - and opening in the blink of an eye! Handle of the knife made of black micarta. 
332,99 €
352,99 €

In magazzino

-29,00 €
Coltello da tasca Claude Dozorme Thiers Verrou feather 9cm 5.90.206.99
Claude Dozorme Thiers Verrou knife has original handle with real feather. The knife that has an amazing mechanism also has a beautiful handles which will be appreciate by the hunters, fishermen and any outdoor lovers. Each Thiers Verrou knives is delivered in its own dark grey box, including a guarantee, which reminds of the Volvic’s dark stone, a symbolic material of the Auvergne region.
98,42 €
127,42 €

In magazzino

-6,00 €
Coltello da tasca Ganzo Adimanti Red 8.5cm Skimen-RD
Folding knife Ganzo Adimanti Red Skimen-RD has 85mm long blade made of D2 tool steel. The Skimen Model is the creation of Ruslan Skimen a knife repairman. This is the first knife of the Adimanti design series, embodying convenience, logic, respectability. The handle is made of traditional G10, which gives it wear resistance, protection from high temperature, moisture, and resistance to damage. The knife could be optimally used for hunting and tourist purposes. The total length of the product is only 20.5 centimeters. Such compact dimensions give an advantage to the knife for everyday use. It can be easily put in a bag or pocket and used as needed, the model is always at hand.
28,60 €
34,60 €

In magazzino

-6,00 €
Coltello da tasca Ganzo Adimanti Purple 8.5cm Skimen-PL
Folding knife Ganzo Adimanti Purple Skimen-PL has 85mm long blade made of D2 tool steel. The Skimen Model is the creation of Ruslan Skimen a knife repairman. This is the first knife of the Adimanti design series, embodying convenience, logic, respectability. The handle is made of traditional G10, which gives it wear resistance, protection from high temperature, moisture, and resistance to damage. The knife could be optimally used for hunting and tourist purposes. The total length of the product is only 20.5 centimeters. Such compact dimensions give an advantage to the knife for everyday use. It can be easily put in a bag or pocket and used as needed, the model is always at hand.
28,60 €
34,60 €

In magazzino