Filtrer
Prix
€ €
Fabricants
Longueur des cordes, mm
Taille
Sex
Pays
Acier
Poignée
Série
Dureté
Etui
Verrouillage
Matériel
Filtrer
Sommelier knife Fox Vinum VM-1 - 1
Sold out
Couteau pliant Fox Knives Vinum VM-1
Fox Vinum Professional Corkscrew has stainless steel handle with satin finishing. Classic lever, 5 turns spiral and wave serrated blade.
41,12 €

Sold out

Couteau pliant Böker Plus Urban Trapper Micarta 01BO705 8.3cm
Sold out
Couteau pliant Böker Plus Urban Trapper Micarta 8.3cm 01BO705
Boker Plus Urban Trapper, designed by Brad Zinker, is the elegant pocket knife with a dark stonewash blade made of VG-10, which is hollow-ground and can be opened by a flipper with ball bearings. The pleasantly textured handle scales are made of green canvas Micarta and always fit securely in the hand. The spacer and the stable titanium liners are anodised in a brass colour and thus match the colour of the deep carry clip (tip-up/r), which is also made of titanium. With high-quality nylon case for storage. Boker Plus Urban Trapper weighs 52 g.
104,03 €

Sold out

Couteau pliant Böker Plus Rockhopper 01BO317 4cm
Sold out
Couteau pliant Böker Plus Rockhopper 4cm 01BO317
Boker Plus Rockhopper is the extremely compact pocket knife by Michael Reinhold- It's a practical two-finger knife with excellent ergonomics and an extremely comfortable hand position, which is further improved by the black lanyard. It is equipped with a short blade made of D2, which is opened by a removable thumb stud on both sides and locked in place by a stable stainless steel linerlock in the textured G10 handle. The decorative blade axle screw is clearly curved. With reinforced lanyard hole, deep carry clip (tip-up/r) and high-quality nylon case for storage. Boker Plus Rockhopper folder weighs 61 g.
37,90 €

Sold out

Couteau pliant Böker Plus Tech Tool Carbon 1 01BO821 7.1cm
Sold out
Couteau pliant Böker Plus Tech Tool Carbon 1 7.1cm 01BO821
Böker Plus Tech Tool Carbon 1 folder has a modernized construction, which is based on solid steel liners, is embedded in two contoured handle scales, made out of lightweight carbon fiber.  The Swedish Sandvik 12C27 steel, with a Rockwell hardness of 58-60 HRC, provides outstanding edge retention of the hollow ground blade. The high quality manufacturing, with a smooth blade action and optimized operability, are proof of the premium quality of our Boker Plus Tech Tools. Tools: glass-breaker, pocket clip. Böker Plus Tech Tool Carbon 1 folding knife weighs 57 g.
36,29 €

Sold out

Couteau de Plongée Extrema Ratio Ultramarine with hole 04.1000.0320/BLK 15cm
Sold out
Couteau de Plongée Extrema Ratio Ultramarine with hole 15cm 04.1000.0320/BLK
Extrema Ratio ULTRAMARINE is an amphibious knife, carried around from underwater operation equipment (diving suit) to ground operation equipment (tactical vest). Can be shipped only inside EU. Two different versatile sheaths were therefore developed for it. The scuba sheath can be worn at the ankle, or its hard ABS section can be attached by two BELT-CLIPS to either the breathing apparatus or BCD belts. The land sheath (OPTIONAL, included on request) is MOLLE system compatible, designed to be attached to the tactical vest and carried inside a waterproof bag during underwater operations. All an operative has to do, if getting rid of his diving suit after landing, is to draw the knife from its ankle sheath and place it in the tactical vest sheath. Primary functions: field operations, underwater operations, emergency tool, survival and combat.
522,58 €

Sold out

Couteau pliant Mcusta Shinra Mixture Ripple MC-0141G 7.1cm
Sold out
Couteau pliant Mcusta Shinra Mixture Ripple 7.1cm MC-0141G
The Mcusta Shinra Mixture Ripple MC-0141G folder is a stylish Japanese gentleman's knife.The handle is made from ironwood. This knife is enhanced with a remarkable blade with a core made from SPG2-powdered steel. An extremely hard type of steel that retains its sharpness for a long time. The core is laminated in between three layers of softer steel. Includes a belt sheath. Weight 93 g.
229,84 €

Sold out

Couteau pliant Higonokami Aogami 9.5cm
Sold out
Couteau pliant Higonokami Aogami 9.5cm
The Higonokami folder from the Japanese manufacturer Nagao Higonokam is designed for everyday use. The blade is made of Japanese aogami carbon steel. The brass handle is equipped with a hole for the safety rope. The knife weighs about 70 g.
28,23 €

Sold out

Couteau à steak Deejo Set of 6 Titanium 2YP001 11cm
Sold out
Couteau de cuisine Deejo Set of 6 Titanium 11cm 2YP001
Set of six table knives with a fixed non-serrated matt blade in 3CR13 stainless steel with a gray titanium (Food Grade) finish. The handle is plated on both sides with black ABS. 100% dishwasher safe. This knife collection in all its elegance and simplicity, dishwasher-safe, with a perfect and durable cut, proves the indispensable companion of the exceptional table.
120,16 €

Sold out

Couteau pliant Buck Knives 284 Bantam® BBW Tree 0284CMS18 7cm
Sold out
Couteau pliant Buck Knives 284 Bantam® BBW Tree 7cm 0284CMS18
Buck 284 Bantam BBW Tree est un petit couteau de poche durable et élégant. Le manche texturée est en GRN. La lame est en 420HC. Longueur totale 162 mm. Fabriqué aux États-Unis avec des pièces importées. Poids 1,5 oz (43 g).
24,19 €

Sold out

Sujihiki Couteau Japonais Sukenari 3 layers ZDP189 S-116 27cm
Sold out
Sujihiki Couteau de cuisine Sukenari 3 layers ZDP189 27cm S-116
Sukenari sujihiki knife. Blade lenght is 270 mm. Traditional Japanese octagonal magnolia handle. Blade of chef knife Sukenari is made of ZDP-189 steel (3 layers). This Sukenari sujihiki japanese knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
298,39 €

Sold out

Santoku Couteau Japonais Yoshimi Kato Ginsan D-702CW 17cm
Sold out
Santoku Couteau de cuisine Yoshimi Kato Ginsan 17cm D-702CW
Couteau Santoku avec lame ginsan satinée fabriquée par Yoshimi Kato. Yoshimi Kato utilise l'acier Ginsan, ou Argent-3, comme élément principal de cette gamme de lames. L'acier G3 est bien connu pour ses excellentes propriétés de bord. Longueur de la lame 170 mm. Manche-cerisier. Pour santoku Yoshimi Kato Ginsan, il est recommandé de laver à la main à l'eau tiède et de sécher avec une serviette. Évitez les os, les aliments surgelés, les noix et les bonbons durs ou tout autre aliment que les fruits, les légumes et les protéines.
197,58 €

Sold out

Petty Couteau Japonais Makoto Kurosaki Petty STYLK-201 13.5cm
Sold out
Petty Couteau de cuisine Makoto Kurosaki Petty 13.5cm STYLK-201
Japanese petty knife handmade by Makoto Kurosaki. 135 mm SPG2 blade with stainless steel clad. Handle: cherrywood. Handwash in warm water and towel dry. Do not cut frozen foods. Makoto Kurosaki is an exceptionally talented blacksmith working in Takefu Knife Village.
137,10 €

Sold out

Yanagiba Japanese kitchen knife Sakai Takayuki Inox 04304 27cm - 1
Sold out
Yanagiba Couteau de cuisine Sakai Takayuki Inox 27cm 04304
Traditional japanese Sakai Takayuki Yanagiba Sashimi Inox knife with 27 cm single edged blade. Blade is made chrome and molybdenum 8A stainless steel. Sakai Takayuki Inox knives are sharp and do not rust easily due to their special material. The U shaped magnolia handles and water buffalo bolsters are easy to grip and are comfortable in the hand, even through long hours of use. Nothing slices sashimi like a perfectly sharpened Yanagiba. The long sharp blade severs fibres in the flesh without pulling or tearing. This Sakai Takayuki Yanagiba Inox 27 cm 04304 easy to sharpen and recommended for business and home use.
152,42 €

Sold out

Étui Tojiro Nakiri Saya 18 cm M-312
Sold out
Étui Tojiro Nakiri Saya 18 cm M-312
The M-312 saya will fit all Tojiro nakiri knives with blades up to 180 mm. About models of other manufactures, please, ask our consultants. Tojiro saya/wooden sheaths are made from magnolia wood which is a hard wood and is very light weight. Saya has small wooden pin which you remove to place your knife inside and you can then reattach the pin to make it safe. The saya are also very good if keeping knives in draws at home or in the professional kitchen as they will be protected from other sharp blade which can potentially chip or dull the cutting edge.
28,23 €

Sold out

Étui Tojiro Santoku Saya 18 cm M-311
Sold out
Étui Tojiro Santoku Saya 18 cm M-311
The M-311 saya will fit all Tojiro Santoku knives with blades up to 180mm. About models of other manufactures, please, ask our consultants. Tojiro saya/wooden sheaths are made from magnolia wood which is a hard wood and is very light weight. Saya has small wooden pin which you remove to place your knife inside and you can then reattach the pin to make it safe. The saya are also very good if keeping knives in draws at home or in the professional kitchen as they will be protected from other sharp blade which can potentially chip or dull the cutting edge.
28,23 €

Sold out

Couteau pliant Fox Knives Silver Collection Wood 594 7.5cm
Sold out
Couteau pliant Fox Knives Silver Collection Wood 7.5cm 594
Fox Knives stylish folder Silver Collection 594 for sports and hunting use. Knife with 2.95" N690Co cobalt vanadium stainless blade, satin finish. Palisander (rosewood) handles. Lock back. Knife weighs 160 g. 
 
69,35 €

Sold out

Couteau pliant Fox Knives The Dart Training Orange FX-597 TK 6.5cm
Sold out
Couteau pliant Fox Knives The Dart Training Orange 6.5cm FX-597 TK
Fox Knives folding training karambit The Dart 597 measures 185 mm overall with a 65 mm 420C stainless blade, bead blasted coating. It can be opened in a variety of ways including the patented Emerson wave feature, thumb slot, or the flipper tab. The milled T6-6082 aircraft grade orange aluminum/G-10 handles provide superb purchase and the integrated finger hole works excellently with both the index and pinky fingers. Fox training karambit 597 weighs 100 g - 3.53 oz. Design by Doug Marcaida.
116,94 €

Sold out

Couteau pliant Fox Knives The Dart Black FX-597 6.5cm
Sold out
Couteau pliant Fox Knives The Dart Black 6.5cm FX-597
Fox Knives folding karambit The Dart 597 measures 185 mm overall with a 65 mm N690Co cobalt vanadium stainless tanto blade with black Idroglider coating. It can be opened in a variety of ways including the patented Emerson wave feature, thumb slot, or the flipper tab. The milled T6-6082 aircraft grade black aluminum/G-10 handles provide superb purchase and the integrated finger hole works excellently with both the index and pinky fingers. It's a pocket defense tool with a functional, elegant style from a quality manufacturer. Fox karambit 597 weighs 100 g - 3.53 oz. Design by Doug Marcaida.
117,74 €

Sold out

Couteau Karambit Fox Knives Bastinelli Black Bird FX-591 OD 6.5cm
Sold out
Couteau à lame fix Fox Knives Bastinelli Black Bird 6.5cm FX-591 OD
Fox Knives Black Bird FX-591 OD small karambit is the beautiful Bastinelli design manufactured in Italy by Fox Knives. Fox Knives has been manufacturing a part of Bastinelli Creations production lineup for years.  The Fox Bastinelli Black Bird measures 6.69" overall with a 2.56" N690Co stainless steel blade with black Idroglider coating. The textured green G10 handle scales provide superb purchase and the integrated finger hole works excellently with both the index and pinky fingers. It comes with a pocket clip set up for tip up, right or left carry. Fox Bastinelli Black Bird karambit weighs  110 g - 3.88 oz.
169,35 €

Sold out

Couteau pliant Fox Knives Suru Carbon Fiber FX-526 TCBL 6cm
Sold out
Couteau pliant Fox Knives Suru Carbon Fiber 6cm FX-526 TCBL
Fox Knives Suru FX-526 TCBL folder is designed by Jesper Voxnaes-Suru. The knife can be opened with either a flipper or a small blade cutout. A ball-bearing pivot ensures smooth and consistent action, making the Suru a joy to open. Small but mighty, the handles are designed to accommodate a variety of grips, bringing the 2.36" clip point blade to bear. The finger guard provided by the flipper provides protection for your fingers, but for even closer work a generous choil in front of the flipper/guard allows you to choke up for more precision. Böhler M390 steel backs up the good looks of the Suru with serious performance, providing some of the best edge retention available in a folding knife, satin coating.Black handle is completing the package is titanium hardware, including a milled pocket clip in a tip-up, right side carry configuration. Stylish and functional, a blacked zirconium ball bearing rests in the clip to look great and ease extraction from your pocket. Fox Knives Suru FX-526 TCBL folder weighs 72 g - 2.54 oz.
195,15 €

Sold out

Couteau pliant Fox Knives Suru Carbon Fiber FX-526 TCB 6cm
Sold out
Couteau pliant Fox Knives Suru Carbon Fiber 6cm FX-526 TCB
Fox Knives Suru FX-526 TCF folder is designed by Jesper Voxnaes-Suru. The knife can be opened with either a flipper or a small blade cutout. A ball-bearing pivot ensures smooth and consistent action, making the Suru a joy to open. Small but mighty, the handles are designed to accommodate a variety of grips, bringing the 2.36" clip point blade to bear. The finger guard provided by the flipper provides protection for your fingers, but for even closer work a generous choil in front of the flipper/guard allows you to choke up for more precision. Böhler M390 steel backs up the good looks of the Suru with serious performance, providing some of the best edge retention available in a folding knife, satin coating.Black handle is completing the package is titanium hardware, including a milled pocket clip in a tip-up, right side carry configuration. Stylish and functional, a blacked zirconium ball bearing rests in the clip to look great and ease extraction from your pocket. Fox Knives Suru FX-526 TCF folder weighs 72 g - 2.54 oz.
195,15 €

Sold out

Couteau pliant Fox Knives Radius Damascus FX-550 DCF 7.5cm
Sold out
Couteau pliant Fox Knives Radius Damascus 7.5cm FX-550 DCF
Fox Knives does it again with the Radius, and back to back Blade Show Knife of the Year awards! At the 2019 Blade Show in Atlanta, Georgia US this knife won an award for the best imported knife, and for Overall Knife of the Year. Designed by Denis Simonutti, the Radius features a new lock that takes major strides in the directions of safety, ease of use, and fidgeting. To open, use the stud to rotate around the pivot, opening the blade. To close, just push down on the stud, and rotate it back. The Radius is a statement of a knife that will bring a smile to your face each time you open it! Blade 7.5 cm - 2.95" Damascus steel Damacore DC18N. Handle is copper infused carbon fiber. Weight 115 g - 4.06 oz.
789,52 €

Sold out

Couteau pliant Fox Knives Radius G10 Green FX-550 G10OD 7.5cm
Sold out
Couteau pliant Fox Knives Radius G10 Green 7.5cm FX-550 G10OD
The Fox Knives Radius FX-550 G10OD is a cool and remarkable pocket knife. At the 2019 Blade Show in Atlanta, Georgia USA this knife won awards for the best imported knife and Overall Knife of the Year. The Fox Knives Radius is a revolutionary pocket knife. The thumb stud is added to the handle and also functions as a lock. Really unique! By pushing the thumb stud you can unlock the knife to make sure you can close it. No one has ever done that. And funnily enough it is a type of invention that makes you think: why didn't anyone come up with this before? The blade 75 mm is made from Böhler N690 steel, stonewashed coating. A tough, fine type of steel that retains its sharpness well and is also easy to sharpen. N690 is also stainless. An excellent combination of desirable factors for an EDC pocket knife. The green handle and backspacer are made from G10. An incredibly strong composite material made from synthetic resin and glass fibres. Incredibly strong and light-weight. G10 can also handle its own. Great if you carry the Radius with you on a daily basis. Weight 105 g - 3.70 oz.
132,26 €

Sold out

copy of Yanagiba Japanese kitchen knife Tojiro MV F-1057 24cm - 1
Sold out
Yanagiba Couteau de cuisine Tojiro MV 27cm F-1058
Tojiro MV Resin Collar Yanagi-Sashimi with 270mm blade. Blade made from wear and rust resistant Molybdenum Vanadium steel. So that its maintenance is easier than carbon steel knives and therefore suitable for beginners. However, edge is carefully sharpened without compromise by our craftsman. Handle is made from magnolia and has good water resistance. Weight of Tojiro MV Yanagiba F-1058 knife is 145 g. Like other traditional Japanese knife blades, this knife has a bevel on only one side of the blade, to help achieve even slices.
109,68 €

Sold out