Filtrer
Prix
Fabricants
Longueur des cordes, mm
Taille
Sex
Pays
Acier
Poignée
Série
Dureté
Etui
Verrouillage
Matériel
Filtrer
Sold out
Couteau pliant MKM Knives Fara 7.6cm MY01-T
Folding knife Fara MY01-T with satin finished Böhler M390 steel blade, two-hand opening with nail groove, PTFE washer rotation mechanism, slip joint system without blade lock. The handle is made from Titanium Ti6AI4V. Combined with the use of stunning materials the MKM Fara is one of the most beautiful gentleman's knives in range. Designer: Lucas Burnley. Comes with leather sheath with belt loop. The pocket knife weighs 90 g.
161,21 €

Sold out

Sold out
Couteau à lame fix Böker AK1 Droppoint CF 7.6cm 126502
The Böker AK1 Droppoint CF 126502, developed in cooperation with the young knifemaker Alex Kremer and Daily Customs, is a versatile small everyday knife that can be perfectly adapted to your own needs. The ergonomically shaped handle scales are made of wild carbon fiber and are comfortable to hold. They can be easily dismantled using the torx-key supplied and can be replaced by a wide range of alternative scales developed and produced in conjunction with Daily Customs. In addition, the intricately manufactured lanyard hole at the end of the handle can be turned around when the handle scales are dismantled so that it disappears into the handle. It is made of RWL 34, just like the complete full tang, with minimal manufacturing tolerances. This means that the knife can be adapted to your own requirements in the shortest possible time and modified according to the situation. Supplied with a high-quality black leather sheath, which is provided with a sewn-in ulticlip and can be easily attached to the pocket hem thanks to the locking spring clip.  Handmade in the Boker Knife Manufactory in Solingen.
184,68 €

Sold out

Sold out
Couteau à lame fix Böker AK1 Droppoint Grenadill 7.6cm 125502
The Böker AK1 Droppoint Grenadill 125502, developed in cooperation with the young knifemaker Alex Kremer and Daily Customs, is a versatile small everyday knife that can be perfectly adapted to your own needs. The ergonomically shaped handle scales are made of certified imported grenadilla wood and are comfortable to hold. They can be easily dismantled using the torx-key supplied and can be replaced by a wide range of alternative scales developed and produced in conjunction with Daily Customs. In addition, the intricately manufactured lanyard hole at the end of the handle can be turned around when the handle scales are dismantled so that it disappears into the handle. It is made of RWL 34, just like the complete full tang, with minimal manufacturing tolerances. This means that the knife can be adapted to your own requirements in the shortest possible time and modified according to the situation. Supplied with a high-quality black leather sheath, which is provided with a sewn-in ulticlip and can be easily attached to the pocket hem thanks to the locking spring clip.  Handmade in the Boker Knife Manufactory in Solingen.
192,74 €

Sold out

-43,00 € Sold out
Couteau pliant Buck Knives 112 Ranger Sport 7.6cm 0112GRS5-B
Moderne et haut de gamme, le Ranger Sport est la version Pro EDC du 112 Ranger. Le couteau est fabriqué en acier américain S30V, qui offre une excellente combinaison de rétention des bords, de ductilité, de dureté, de ténacité, de résistance à l'usure et de résistance à la corrosion. Le manche est en aluminium et en matériau composite Micarta. Le modèle est doté d'un repose-pouce et d'un clip de poche.
103,77 €
146,77 €

Sold out

Sold out
Couteau pliant Buck Knives Ranger Fingergrooved 50 Anniv. 7.6cm 0112BRS3FG-B
Le légendaire Buck 50th Anniversary 112 Ranger possède un manche en bois d'ébène naturel avec des rainures pour les doigts. La lame est en acier 420HC. La conception de la lame Clip Point offre un bon contrôle pour les travaux détaillés et la coupe dans les zones difficiles d'accès. Equipé d'un verrou arrière. Pour commémorer son 50e anniversaire, ce 112 Ranger arbore un tampon spécial sur la lame.
95,97 €

Sold out

Sold out
Couteau pliant Buck Knives 50th Anniversary 112 Ranger 7.6cm 0112BRS3-B
Introduced in 1972, the 112 Ranger has a classic and unmistakable style that so many generations have come to know and love. The  Buck 50th Anniversary 112 Ranger 0112BRS3-B features brass bolsters, a deep clip point blade, and a rich genuine ebony wood handle. The blade is made of 420HC Steel. This is Buck's standard blade material because it approaches the wear resistance of high carbon alloys while delivering the corrosion resistance of chromium stainless steels. The crescent tip makes the blade thinner with a sharper point. This shape provides good control for detail work and cutting in tight places. Commemoration 50 years, this 112 Ranger features a custom blade stamp and handle medallion to signify the anniversary.
95,97 €

Sold out

Sold out
Couteau à lame fix Ka-Bar Wrench 7.6cm 1119
The Ka-Bar  Wrench 1119 is one-piece construction 18,1 cm overall knife. It has 7,6 cm stainless 425 high carbon steel blade. Knife comes with plastic sheath. 
58,00 €

Sold out

Sold out
Couteau pliant Böker Plus Connector G10 7.6cm 01BO354
The handy Böker Plus Connector G10 01BO354 unmistakably bears the signature of the Polish knifemaker Jakub Wieczorkiewicz, who is now known throughout the world for his modern folders under his brand name Poltergeist Works. Full order books, perfect workmanship and individual implementation mean that his handcrafted pieces fetch top prices internationally. The Connector is a compact EDC with a ball-bearing Wharncliffe blade made of D2, which is opened by a removable thumb stud and reliably locked by a sturdy linerlock. The handle scales made of non-slip G10 with an impressive texturing always lie securely in the hand, while jimpings on the back of the blade additionally increases work safety. Supplied with a decorative blade axle screw, a lanyard hole, a practical deep-carry clip (tip-up/r) and a high-quality nylon pouch for storage.
35,86 €

Sold out

-5,00 € Sold out
Couteau pliant Byrd Meadowlark 2 marron 7.6cm 04PBN2
Couteau pliant Meadowlark 2 avec manche en thermoplastique FRN marron. La lame du couteau Byrd Meadowlark 2 mesure 76 mm de long et est en acier 8Cr13MOV. Le couteau pliant Byrd Meadowlark 2 est équipé d'un clip réglable dans différentes positions.
28,87 €
33,87 €

Sold out

Sold out
Couteau pliant Böker Plus Aphex Mini 7.6cm 01BO197
The modern Böker Plus Aphex Mini 01BO197 is the significantly scaled-down version of the Boker Plus Collection 2020 designed by Lucas Burnley. The intricately ground blade is made of VG-10 and is supplied with an impressive hairline finish and a decorative ricasso. Thanks to the ball bearing and flipper, the knife is particularly easy to open. The ergonomically shaped handle is milled three-dimensionally from titanium and is adorned with a modern inlay of wild carbon fibre with red inclusions. Jimpings around the thumb rest and the generously dimensioned spacer increase safety at work. Supplied with a lanyard hole, removable titanium clip (tip-up/r) and a high-quality nylon case for storage.
132,99 €

Sold out

Sold out
Couteau pliant Spyderco Chaparral Carbon Fiber 7cm C152CFP
Folding knife Spyderco Chaparral Lockback is 3.63" closed. Knife has 2.75" CTS-XHP stainless blade and carbon fiber handle. Thumb pull. Pocket clip.
160,48 €

Sold out

Sold out
Couteau à lame fix Böker Daily Customs AK1 Drop point Mustard 7.6cm 120502
Boker Daily Knives AK1 fixed, developed in cooperation with the young knifemaker Alex Kremer and Daily Customs, is a versatile small everyday knife that can be perfectly adapted to your own needs. The AK1 he designed is equipped with a short drop point blade 76 mm made of powder metallurgical RWL 34, a high-performance stainless steel which is ice-hardened to 61 to 62 HRC. The ergonomically shaped and comfortable handle scales are made of durable burlap micarta. They can be easily dismantled using the Torx key supplied and can be replaced by a wide range of alternative scales developed and produced in conjunction with Daily Customs. In addition, the intricately manufactured lanyard hole at the end of the handle can be turned around when the handle scales are dismantled so that it disappears into the handle. It is made of RWL 34, just like the complete full tang, with minimal manufacturing tolerances. This means that the knife can be adapted to your own requirements in the shortest possible time and modified according to the situation. Supplied with a high-quality black leather sheath, which is provided with a sewn-in ulticlip and can be easily attached to the pocket hem thanks to the locking spring clip. The AK1 can thus be pulled effortlessly while the sheath is held in place by the Ulticlip. Handmade in the Boker knife manufactory Solingen. Weight 63 g.
Available from 16.12.2020.
175,81 €

Sold out

Sold out
Couteau pliant Böker Plus Obscura 7.6cm 01BO243
Boker Plus Obscura pocket knife has an unusual blade of 9Cr13CoMoV reminiscent of a Saracen sword. The curved swords were used for many centuries in Middle East, North Africa and India. The modern drop-point blade of the compact pocketknife opens with a flipper and is secured with a sturdy linerlock. The black handle scales of textured G10 offer a secure grip. Handle has a clip (tip-up).
39,52 €

Sold out

Sold out
Couteau pliant Ontario RAT-2 D2 Coyote Brown 7.6cm 8828CB
Ontario RAT Model II has been upgraded with a D2 steel blade in a satin finish and a Coyote Brown nylon handle.
If you like the Ontario RAT Model 1, but want something a little less bulky, then you'll love the Model 2. The RAT Model II is based on the popular Model I. It's smaller, but retains the same great shape and performance of the original. This knife is designed for comfort and performance, with an index finger groove on the handle and jimping on the spine of the blade for controlled cutting. It features textured nylon 6 scales with an open-built steel liner lock frame. The RAT Model 2 is fully ambidextrous with dual thumb studs and a 4-way reversible pocket clip.
51,60 €

Sold out

Sold out
Couteau pliant Buck Knives 112 Slim Ranger Pro 7.6cm 0112BKS6-B
Le couteau pliant Buck 112 Slim Ranger Pro est un outil classique et fiable. Le couteau mince a été développé comme une solution moderne pour une version de transport quotidien (EDC) du 112 Folding Ranger, mais avec un look plus moderne et des matériaux avancés. Doté de profils fins et colorés, d'un clip de poche de transport profond et d'une conception à ouverture d'une seule main. La lame satinée à pointe clip de 7,6 cm est en acier inoxydable S30V. Ouverture et fermeture faciles grâce au design de verrouillage. Le manche noir G-10. Couteau pliant Buck 112 Slim Ranger Pro fabriqué aux USA.
75,00 €

Sold out

-25,00 € Sold out
Couteau pliant Bear&Son 4 7.6cm 113BTR
Couteau papillon d'entraînement Bear&Son avec manches en métal et revêtement protecteur noir. La lame épaisse et non affûtée mesure 7,6 cm de long. Elle est en acier inoxydable 440 et pèse environ 110 g. Ce couteau est fabriqué aux États-Unis.
36,35 €
61,35 €

Sold out

Sold out
Couteau à lame fix Bastinelli PicoloMako 7.6cm BAS15
Bastinelli Creations PicoloMako knife. Bastinelli Creations takes functional tools and boils them down to simplistic, useful designs with a little bit of style. They're known for their Dragotac folding knife with its versatile flat ground Wharncliffe style blade and oddly shaped, yet wildly ergonomic handle. Many of their designs utilize this blade shape but all feature exceptional ergonomics and top of the line materials. The PicoloMako is a tactically designed fixed blade with a large amount of utilitarian functionality thrown in. Instead of the traditional hawkbill blade shape, you find a karambit design, this one has an upswept shape with a bottle opener machined into the thumb ramp. This gives you the ability to stab, slice, and pop bottles with ease. The full-tang blade is made from N690Co stainless steel with a black PVD stonewashed finish and includes a small Kydex sheath. The extremely ergonomic handle is made from black G10 with a one-inch diameter pinky ring for maximum security during use. Fit it to your belt or hang it around your neck, this knife makes both a great tactical tool as well as a functional EDC fixed blade. It is manufactured by Fox Knives in Italy, designed in collaboration with Doug Marcaida and Funker Tactical.
167,74 €

Sold out