Filtrer
Prix
Fabricants
Longueur des cordes, mm
Taille
Sex
Pays
Acier
Poignée
Série
Dureté
Etui
Verrouillage
Matériel
Filtrer
Couteau pliant Blackhawk Hawkpoint 5.7cm 15HP01BK
Folding knife Blackhawk Hawkpoint has 57mm long blade made of 9Cr stainless steel. Handle made of G10 and it has pocket clip. Knife has bottle opener on edge. 
44,35 €

En stock

Couteau pliant Blackhawk Gara 3 6.9cm 15G3201BK
Folding karambit knife Blackhawk Gara 3 with 6.99cm black DLC coated D2 tool steel blade. Handle of the karambit made of black G10. In the end of the handle Gara 3 has finger ring and pocket clip.
79,84 €

En stock

-10%
Couteau pliant Böker M4 Sherman-Damascus 7.7cm 110662DAM
The extraordinary Boker M4 Sherman-Damascus folder is a piece of living history and combines high-quality craftsmanship with historical materials. The American M4 Sherman was already designed in 1940 and is still considered one of the most famous tanks in history. It was produced between 1942 and 1945, was in service until 1957 and was used on all battlefields of the Second World War.  
The Boker Sherman-Damascus is equipped with a unique damascus blade, forged from different materials from the production of M4 Sherman tanks, which were previously restored by the museum. The unique damascus is forged by hand for us by Chad Nichols in the Customized Ladder pattern and is reminiscent of the tank tracks left in the ground by the heavy chains of the M4 Sherman. The ball bearing blade is opened by thumb stud and locked by a solid steel frame lock, a Hinderer Lock-Stop acts as overstretch protection for the lock.
The overall shape of the knife is a tribute to the aesthetic lines of the armour, while the decorative blade axle screw is modelled on the characteristic main drive sprocket. The slightly contoured burlap micarta handle fits comfortably in the hand and the colour is reminiscent of the camouflage paint used by both the U.S. Army and the Marine Corps. With lanyard hole and practical deep carry clip (tip-up/r). Handmade in the Boker knife manufactory in Solingen. Delivery with noble floating display, certificate of authenticity and individual serial number. Weight 107 g.
316,12 €
351,25 €

Expédition après 10-20 jours ouvrables

Couteau pliant Extrema Ratio Frame Rock Titan Blue Satin 7.5cm 04.1000.0456/SAT/BLU
L'Extrema Ratio Frame Rock Titan Blue est un élégant couteau pliant doté d'un manche en titane bleu, alliant robustesse et légèreté. La lame pointe de lance de 75 mm est en acier Bohler N690 de haute qualité, finition satinée. Le manche est équipé d'un clip de poche. L'ouverture de la lame est simple et fluide grâce aux roulements. Ce mécanisme permet d'ajuster la force nécessaire pour libérer la lame grâce à la vis. Le Framelock est intégré. Le couteau pèse environ 270 g. Fabriqué en Italie.
466,13 €

En stock

Couteau pliant We Knife Smooth Sentinel Flipper 7.5cm 20043-5
Folding knife We Knife Smooth Sentinel Flipper 20043-5 has 7,5 cm blade made of CPM 20 CV steel. The Smooth Sentinel is an easy-carrying knife that's there to watch over your day-to-day affairs. The simple curved handle and drop point blade combination make it perform well for all users, no matter their hand size. The reversible pocket clip and ambidextrous flipper tab support lefties, the only thing that does not is the frame lock. Apart from this minor inconvenience that lefties will be more than used to, this is an extremely excellent knife. Handle of the knife is made of titanium with aluminum foil.
209,68 €

En stock

Couteau pliant We Knife Shakan Flipper 7.5cm 20052C-1
Folding knife We Knife Shakan Flipper 20052C-1 has 7,5 cm blade made of CPM 20 CV steel. The WE Shakan flipper is the kind of knife you reach for on the way out the door and want by your side all day long. It's just the right size to disappear in the pocket while still performing like a full-size knife should when cutting. The drop point blade is great for all sorts of utility tasks and the compact handle is designed to work just fine for all end users. Limited to just 300 pieces, the Shakan is very similar in our minds to their signature folder, the Elementum, but better! Handle of the knife is made of titanium.
217,74 €

En stock

Couteau pliant CIVIVI Sinisys 9.4cm C20039-DS1
Folding knife CIVIVI Sinisys C20039-DS1 with 9.4cm blade made of damascus steel. The Sinisys takes everything you love about the Cogent design to the next level. The size, strength, and curves are all more pronounced leading to a knife that is easy to gravitate towards. Extra blade and handle length are always appreciated and the addition of the frame lock - while we do love our button locks - gives you great peace of mind when working the knife hard. A reversible pocket clip allows you to carry it on either side of your body, as all good tactical knives should. Use it around the campsite, in the kitchen, on a deployment, on a hunt, in a survival scenario, or anywhere in between. The Sinisys can do it all. Handle of the knife made of carbon fiber on G10.
110,48 €

En stock

Couteau pliant CIVIVI Sinisys 9.4cm C20039-2
Folding knife CIVIVI Sinisys C20039-2 with 9.4cm blade made of 14C28N steel. The Sinisys takes everything you love about the Cogent design to the next level. The size, strength, and curves are all more pronounced leading to a knife that is easy to gravitate towards. Extra blade and handle length are always appreciated and the addition of the frame lock - while we do love our button locks - gives you great peace of mind when working the knife hard. A reversible pocket clip allows you to carry it on either side of your body, as all good tactical knives should. Use it around the campsite, in the kitchen, on a deployment, on a hunt, in a survival scenario, or anywhere in between. The Sinisys can do it all. Handle of the knife made of micarta.
74,19 €

En stock

Couteau pliant We Knife StarHawk 7.1cm 21017-3
Folding knife We Knife StarHawk 21017-3 has 7.1cm blade. The StarHawk flipper is a handy offering from We Knife that packs a big punch for a mid-size folder. The broad modified sheepsfoot blade is made from CPM-20CV and holds an edge with the best of them. The large groove down the length of the blade both adds to the looks of the knife and allows the knife to be opened with a flick of the nail. The titanium handles fit the natural curves of the hand and the pronounced finger groove allows for a high level of control while using the knife. The knife is secured via a sturdy frame lock and comes with a titanium pocket clip that can be set up for carrying on either side.The knife is 20,2cm open and 11,5cm closed.
245,97 €

En stock

Couteau pliant We Knife Mini Buster 8.7cm 2003C
Folding knife We Knife Mini Buster 2003C has 8.7cm blade made of CPM 20 CV steel. If you need a robust folder for everyday carry or a combat scenario that will not let you down, you've just found it in the Mini Buster. This collaboration between WE Knives and Snecx Design Lab is one of the most exciting pieces of the year and we could spend all day heaping praise on this knife if we wanted. It is a production priced Snecx with the feeling and feature-set of a mid-tech knife. The trademark Snecx design aesthetic may not be for everyone but the design is a do-it-all and do-it-all-well kind of a knife whose utility functionality cannot be disregarded. Its traditional sheepsfoot blade is great for all sorts of cutting tasks apart from stabbing but it does have a reinforced tip if you tend to do most of your cutting concentrated on that area. The handle, honestly, couldn't be more ergonomic and we love the very straightforward, no-nonsense look of the overall design. You will not be disappointed with the Mini Buster, it's going to be a hard-use EDC knife we recommend for years to come.. The knife is 20,2cm open and 11,5cm closed.
298,39 €

En stock

Couteau pliant We Knife Baloo Purple 8.4cm 21033-3
Folding knife We Knife Baloo Purple 21033-3 has 8.4cm blade made of CPM 20 CV. The Baloo is a straightforward Ostap Hel EDC front flipper with a nice wide base and a large amount of cutting potential. Its curvy grip nestles in the hand comfortably and transitions smoothly into the cutting edge with a nice jimped thumb ramp providing excellent purchase. Various onlays create some style within the family and add to the cool factor of the nested frame lock mechanism. This is one of Ostap's best designs, in our opinion, and a knife worthy of your consideration. Sized just right, easy on the eyes, and easy on the pocket - we love it. The knife is 19,7cm open and 11,6cm closed.
300,00 €

En stock

Couteau pliant Böker Sherman EDC 7.5cm 110665
For the Böker Sherman EDC 110665 blade, Magnacut was used for the first time, which is not without reason glorified as “wonder steel”. Unlike the tool steels usually used, this steel was developed specifically for knife making. The three desirable properties of a steel - edge retention, toughness and rust resistance (stainless in the DIN category) - represent a conflict of goals. To make the steel rust-resistant, the addition of chromium is necessary, which makes the structure coarse, brittle and susceptible to fracture under normal conditions. High hardness, which has a positive influence on cutting durability, is usually achieved at the expense of toughness. With Magnacut, despite the high chromium content of 10.7% and an impressive hardenability of over 62HRC, it has been possible to achieve a very fine microstructure and thus high toughness and shock-load tolerance. The addition of nitrogen plays a central role here. Nitrogen is actually a steel pest in the alloy. However, due to sophisticated heat treatment, among other things, the nitrogen of the Magnacut is integrated into the crystalline lattice structure of the steel structure and thus achieves the otherwise contradictory material properties.
The central structural difference to the M4 Damascus model is the flipper, elegantly integrated into the contours, which allows the blade to slide open smoothly with a small impulse and invites you to play. The ball-bearing blade is opened alternatively by thumb stud and locked by a sturdy titanium framelock with stonewash finish. An overdrive stop acts as an over-extension protection for the lock. The milled titanium clip (tip-up/r) with a steel ball as well as the handle scales made of wild carbon fibre complete the harmonious overall picture.
A special highlight of the Boker Sherman EDC is the protruding backspacer made of Damascus, which is equipped with a lanyard hole in elongated slotted design. The Damascus of the backspacer was forged from various materials from the production of M4 Sherman tanks by Chad Nichols in the Customized Ladder pattern and is reminiscent of the tank tracks left in the ground by the heavy chains of the M4 Sherman.
241,13 €

En stock

-23,00 €
Couteau pliant G. Sakai Nyaife Black Paws 4.1cm GS11668
This model G. Sakai Nyaife Black Paws GS11668 is a harmony of traditional artisan skills and advanced technology. The handle is made of stainless steel. The model has a lanyard hole and pocket clip. To compliment the beautiful artwork, this knife uses woodgrain stainless Damascus with a VG-10 core with a Samurai sword blade (Katana) nail mark. 
68,13 €
91,13 €

En stock

-24,00 €
Couteau pliant G. Sakai Nyaife Silver Paws 4.1cm GS11667
The beautiful artwork G. Sakai Nyaife Silver Paws GS11667 is a small money clip knife with carved paw prints on the handle. To compliment the beautiful artwork, this knife uses woodgrain stainless Damascus with a VG-10 core with a Samurai sword blade (Katana) nail mark. The handle is made of stainless steel. The model has a lanyard hole and pocket clip. 
63,90 €
87,90 €

En stock

-21,00 €
Couteau pliant G. Sakai Ukimon Kinkakuji 4.1cm GS11608
This Ukimon G. Sakai Kinkakuji GS11608 features the “Kinkakuji no Kureyuki” by meaning The Golden Pavilion in Snow by Japanese artist Kawase Hasui. The handle is made of stainless steel. The modified Drop Point blade is made of Damascus steel with VG-10 core. The model has a lanyard hole and pocket clip. The Ukimon is a tribute to Japanese craftsmanship, by traditional craftsmen.
74,97 €
95,97 €

En stock

-17,00 €
Couteau pliant G. Sakai Ukimon Fish 4.1cm GS11168
The  G. Sakai Fish GS11168 is a small, money clip knife with a twist: the obverse scale of each Ukimon knife features a recreation of famous Ukiyo-e artistic prints. The handle is made of stainless steel. The modified Drop Point blade is made of VG-10 stainless steel with satin finish. The model has a lanyard hole and pocket clip. The Ukimon is a tribute to Japanese craftsmanship, by traditional craftsmen.
56,38 €
73,38 €

En stock

-30,00 €
Couteau pliant G. Sakai Gentleman's Framelock 5.7cm GS11164
The stylish G. Sakai Gentleman's Framelock GS11164 folding knife is made from quality materials in Japan. The red GS pattern handle is made of stainless steel. The blade is made of  Damascus steel with VG-10 core. The model has a lanyard hole and pocket clip. Comes with black leather pouch.
121,61 €
151,61 €

En stock

-30,00 €
Couteau pliant G. Sakai Gentleman's Black 5.7cm GS11165
This perfect folding knife G. Sakai Gentleman's Black GS11165 is made of premium materials. The Black "GS" geometric artwork handle is made of stainless steel. The blade is made of  Damascus steel with VG-10 core. The model has a lanyard hole and pocket clip. Comes with black leather pouch.
121,61 €
151,61 €

En stock

-6,00 €
Couteau pliant CRKT Tanto Framelock 7.4cm M16-10S
Inspiré des couteaux tactiques M16, le CRKT Tanto Framelock M16-10S est une version EDC pliante, simple et sans fioritures, du légendaire couteau militaire. Le manche en acier noir, doté d'un clip de poche et d'un trou pour dragonne, est également doté d'un revêtement noir, ce qui augmente sa résistance à la corrosion. La lame tanto de 74 mm est en acier 8Cr13MoV. Ce couteau M16 est équipé d'une goupille et d'un flipper, permettant une ouverture facile d'une seule main. Verrouillage Framelock. La série M16 est l'un des modèles les plus populaires de CRKT. Design : Kit Carson.
39,97 €
45,97 €

En stock

-6,00 €
Couteau pliant CRKT Tanto Black 7.4cm M16-10KSF
Le CRKT Tanto M16-10KSF est un couteau pliant pratique et maniable, idéal pour un usage quotidien ou tactique. La lame Tanto de 74 mm est en acier 8Cr13MoV avec revêtement en oxyde noir. Le manche en acier noir, doté d'un clip de poche et d'un trou pour dragonne, est également doté d'un revêtement noir, ce qui augmente sa résistance à la corrosion. Le couteau M16 est équipé d'un flipper, un excellent assistant pour ouvrir la lame d'une seule main. Verrouillage du cadre. La série M16 est l'un des modèles les plus populaires de CRKT. Design : Kit Carson.
39,97 €
45,97 €

En stock

-14,00 €
Couteau pliant CRKT Framelock Stainless 9.8cm M16-04SS
Le couteau pliant M16-04SS, conçu par le regretté Kit Carson, rend hommage aux classiques en revisitant la gamme de couteaux la plus populaire de CRKT. La lame est fabriquée en acier suédois Sandvik 12C27 robuste, reconnu pour sa bonne tenue du tranchant. Le couteau pliant CRKT M16 est équipé d'un système de verrouillage Frame-Lock. La lame mesure 9,8 cm de long. Le manche squelette est en acier résistant à la corrosion.
58,57 €
72,57 €

En stock

-15,00 €
Couteau pliant CRKT M16 Bronze and Black 8.9cm M16-03BK
Couteau pliant CRKT M16 03 Framelock avec lame noire et manche en bronze. La lame mesure 8,9 cm de long. Elle est en acier inoxydable Sandvik 12C27, d'une dureté de 59-61 HRC. Le manche squelette est en acier résistant à la corrosion. Un flipper et des goupilles permettent d'extraire la lame. Le couteau pliant CRKT M16-03BK est équipé d'un système de verrouillage Frame-Lock.
47,10 €
62,10 €

En stock

-16,00 €
Couteau pliant CRKT M16 Carson Tanto 7.6cm M16-02SS
Le couteau pliant CRKT M16 Framelock BB 02SS rend hommage aux classiques en revisitant la gamme de couteaux CRKT la plus populaire. La lame tanto mesure 76 mm de long. Elle est en acier inoxydable Sandvik 12C27, d'une dureté de 59-61 HRC. Le manche est en acier résistant à la corrosion. Un flipper et des goupilles permettent d'extraire la lame. Le couteau pliant CRKT M16-02SS est équipé d'un système de verrouillage Frame-Lock.
46,10 €
62,10 €

En stock

Couteau pliant Fox Knives Shadow 10cm FX-533 CF
Fox Knives Shadow FX-533 CF folder from Bastinelli is extremely close to tactical perfection. It's modeled after the Dragotac, the knife that put Bastinelli on the map, and Fox has done an incredible job turning this knife into a born and bred flipper. The aesthetic lines and ergonomics that put the blade right in line with your fingers allow you to transfer more force into the cut with less effort. It measures 8.625" overall with a 3.875" stonewashed Elmax blade. It rides on bearings for smooth, crisp action while a replaceable lockbar insert/overtravel arrestor ensures years of solid lockup. For a production knife, it sits perfectly centered with smooth, authoritative action and a perfectly jimped thumb ramp. The handle is made of carbon fiber. Fox Knives Shadow FX-533 CF knife weighs 140 g.
237,90 €

En stock