Filtrer
Prix
€ €
Fabricants
Longueur des cordes, mm
Taille
Sex
Pays
Acier
Poignée
Série
Dureté
Etui
Verrouillage
Matériel
Filtrer
Couteau de lancer Cold Steel Micro Flight 80STMB 7.6cm
Couteau à lame fix Cold Steel Micro Flight 7.6cm 80STMB
Cold Steel Black Fly is a monolithic throwing knife. Full length 203 mm. The blade is 76 mm long and is made of tough carbon steel with a black rust-resistant coating, full tang. The steel handle is equipped with a lanyard hole. Knife weight approximately 77 g.
8,69 €

En stock

Couteau de lancer Cold Steel Mini Flight Sport 80STK10Z 6.3cm
Couteau à lame fix Cold Steel Mini Flight Sport 6.3cm 80STK10Z
Cold Steel Mini Flight Sport throwing knife is overall 10". Knife has a blade 2.5" made of 1055 carbon steel, standard edge, black finish. The handle with lanyard hole. Full tang. One-piece construction with sharpened double edge tip. Weight 6.4 oz.
11,21 €

En stock

Folding knife Böker Sherman EDC 110665 7.5cm
Couteau pliant Böker Sherman EDC 7.5cm 110665
For the Böker Sherman EDC 110665 blade, Magnacut was used for the first time, which is not without reason glorified as “wonder steel”. Unlike the tool steels usually used, this steel was developed specifically for knife making. The three desirable properties of a steel - edge retention, toughness and rust resistance (stainless in the DIN category) - represent a conflict of goals. To make the steel rust-resistant, the addition of chromium is necessary, which makes the structure coarse, brittle and susceptible to fracture under normal conditions. High hardness, which has a positive influence on cutting durability, is usually achieved at the expense of toughness. With Magnacut, despite the high chromium content of 10.7% and an impressive hardenability of over 62HRC, it has been possible to achieve a very fine microstructure and thus high toughness and shock-load tolerance. The addition of nitrogen plays a central role here. Nitrogen is actually a steel pest in the alloy. However, due to sophisticated heat treatment, among other things, the nitrogen of the Magnacut is integrated into the crystalline lattice structure of the steel structure and thus achieves the otherwise contradictory material properties.
The central structural difference to the M4 Damascus model is the flipper, elegantly integrated into the contours, which allows the blade to slide open smoothly with a small impulse and invites you to play. The ball-bearing blade is opened alternatively by thumb stud and locked by a sturdy titanium framelock with stonewash finish. An overdrive stop acts as an over-extension protection for the lock. The milled titanium clip (tip-up/r) with a steel ball as well as the handle scales made of wild carbon fibre complete the harmonious overall picture.
A special highlight of the Boker Sherman EDC is the protruding backspacer made of Damascus, which is equipped with a lanyard hole in elongated slotted design. The Damascus of the backspacer was forged from various materials from the production of M4 Sherman tanks by Chad Nichols in the Customized Ladder pattern and is reminiscent of the tank tracks left in the ground by the heavy chains of the M4 Sherman.
241,13 €

En stock

Couteau de lancer Cold Steel Gladius 80TGS 21cm
Couteau à lame fix Cold Steel Gladius 21cm 80TGS
Cold Steel Gladius es un cuchillo arrojadizo de una sola pieza hecho de acero S50C. Longitud total 356 mm. La hoja de punta romana de 210 mm de largo está hecha de acero al carbono resistente con un acabado negro resistente a la oxidación, espiga completa. El mango de acero ergonómico tiene un orificio para cordón y se puede envolver en paracord. Peso del cuchillo aproximadamente 580 g.
27,02 €

En stock

Couteau de lancer Cold Steel Black Fly 80STMA 10.2cm
Nouveau
Couteau à lame fix Cold Steel Black Fly 10.2cm 80STMA
Cold Steel Black Fly es un cuchillo arrojadizo monolítico. Largo total 203 mm. La hoja tiene 102 mm de largo y está hecha de acero al carbono resistente con un revestimiento negro resistente a la oxidación, espiga completa. El mango de acero está equipado con un orificio para cordón. Peso del cuchillo aproximadamente 70 g.
8,87 €

En stock

Couteau de lancer Cold Steel Pro Flight Sport 80STK14Z 11.4cm
Couteau à lame fix Cold Steel Pro Flight Sport 11.4cm 80STK14Z
Cold Steel Pro Flight Sport throwing knife is overall 13,25". Knife has a blade 4.5" made of 1055 carbon steel, standard edge, black finish. The handle black carbon steel with lanyard hole. Full tang. One-piece construction with sharpened double edge tip. Weight 11.2 oz.
18,55 €

En stock

Couteau de lancer Cold Steel Sure Flight Sport 80STK12Z 6.3cm
Couteau à lame fix Cold Steel Sure Flight Sport 6.3cm 80STK12Z
Cold Steel Sure Flight Sport throwing knife is overall 12". Knife has a blade 2.5" made of 1055 carbon steel, standard edge, black finish. The handle black carbon steel with lanyard hole. Full tang. One-piece construction with sharpened double edge tip. Weight 8.2 oz.
11,95 €

En stock

Fixed blade Knife Böker AK1 Damascus 122509DAM 7.9cm
Sold out
Couteau à lame fix Böker AK1 Damascus 7.9cm 122509DAM
Created in cooperation with the young knifemaker Alex Kremer and Daily Customs, the Böker AK1 Damascus 122509DAM is a versatile small everyday knife which is not only completely convincing as an EDC but already enjoys cult status. The great success of the models with RWL-34 blade steel prompted  to design a high-end version. The new material Fat Carbon Space-Coral Silver sets a completely new accent. The cross-section of the pattern is rotated by 90° and the even spacing of the fine lines are arranged in ingeniously ordered chaos.
The blade is made of stainless Damascus by Chad Nichols in the Boomerang pattern. This creates a charming visual interplay between the materials, which also both have the best mechanical properties in their respective functions.The handle scales can be removed effortlessly with the included Torx key, so that the elaborately crafted lanyard hole at the end of the handle can be turned around when the handle scales are removed and optionally disappear into the handle. Supplied with a high-quality black leather sheath, which has a sewn-in Ulticlip and can be conveniently attached to the hem of the pocket thanks to the locking spring clip. This allows the Boker AK1 Damascus to be drawn effortlessly while the sheath is reliably held in place by the Ulticlip. Handmade in the Boker Knife Manufactory in Solingen.
401,61 €

Sold out