Couteaux Damas

Filtrer
Prix
€ €
Fabricants
Longueur des cordes, mm
Pays
Acier
Poignée
Série
Dureté
Filtrer
Chef knife Miyabi 5000MCD 67 Gyutoh 34401-201-0 20cm - 1
Sold out
Gyuto Couteau Japonais Miyabi 5000MCD 67 20cm 34401-201-0
Zwilling Miyabi 5000MCD 67 japanese gyutoh or chef's knife has a MicroCarbide powder steel MC66 core which gives extremely good sharpness and cutting edge retention. The blade has 132 outer layers of steel which surround the core and make up the unique Damascus-design pattern on the blade. The cutting edge is Honbazuke-honed and symmetrical (not single bevel), so can be used by those both right and left-handed. There is no finger guard so the whole length of the cutting edge can be used. The black Ash wood handle sits comfortably in the hand, allowing firm control and tireless working. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Rockwell hardness of approximately 66. Zwilling Miyabi 5000MCD 67 gyotoh chef's knife made in Japan.
362,10 €

Sold out

Santoku Japanese kitchen knife Miyabi 5000FCD 34684-181-0 18cm - 1
Sold out
Santoku Couteau Japonais Miyabi 5000FCD RAW 18cm 34684-181-0
MIYABI 5000 FCD Santoku, 18cm blade length. This Japanese santoku has a hard fine carbide steel core for very good cutting edge retention and sharpness. Santoku translates as "Three Virtues", these being meat, fish and vegetables. The flat cutting edge lends itself to a chopping motion rather than the rocking cutting movement of European chef's knives. The blade core is surrounded by 48 outer layers of steel which make up the unique Damascus-design pattern on the blade. The cutting edge is Honbazuke-honed and symmetrical (not single bevel), so can be used by those both right and left-handed. There is no finger guard so the whole length of the cutting edge can be used. The handle and half-bolster join seamlessly for comfortable use. The smooth surface helps to prevent the formation of calluses on the thumb and forefinger. Hand wash only for best care, and maintain and sharpen using a whetstone. We’d recommend using a wooden chopping board rather than glass, ceramic or stone boards as these will dull the cutting edge. - FC61 fine carbide steel blade core; - 48 layers of steel surrounding the core create the Damascus-design; - FRIODUR ice-hardened for extreme hardness; - Rockwell hardness of approximately 61; - Symmetrical cutting edge; - Pakka wood handle; - Steel mosaic pin and handle end cap; - Made in Japan.
206,45 €

Sold out

Japanese kitchen knife Santoku Yu Kurosaki Fujin VG10 Damascus ZVD-165SAOWQ 16.5cm
Sold out
Santoku Couteau Japonais Yu Kurosaki 16.5cm ZVD-165SAOWQ
Santoku by Yu Kurosaki with Nickel Damascus-patterned blade. Blade has a core of VG-10 stainless steel. Hardness of 60-61 HRC provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of santoku Fujin VG10 Damascus Series is made of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
290,32 €

Sold out

Japanese kitchen knife Bunka Yu Kurosaki Fujin VG10 Damascus ZVD-165BUOWQ 16.5cm
Sold out
Bunka Couteau Japonais Yu Kurosaki Fujin VG10 Damascus 16.5cm ZVD-165BUOWQ
Yu Kurosaki Bunka knife with Nickel Damascus-patterned blade with a core of VG-10 stainless steel. Hardness of 60-61 HRC provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Bunka Fujin VG10 Damascus Series is made of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
290,32 €

Sold out

Japanese kitchen knife Nakiri Yu Kurosaki Fujin VG10 Damascus ZVD-165NAOWQ 16.5cm
Sold out
Nakiri Couteau Japonais Yu Kurosaki Fujin VG10 Damascus 16.5cm ZVD-165NAOWQ
Yu Kurosaki Fujin series nakiri with Nickel Damascus-patterned blades with a core of VG-10 stainless steel. Hardness of 60-61 HRC provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Nakiri Fujin VG10 Damascus Series is made of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
290,32 €

Sold out

Gyuto Japanese kitchen knife Tojiro Shippu Black FD-1594 21cm
Sold out
Gyuto Couteau Japonais Tojiro Shippu Black 21cm FD-1594
The Shippu Black series from Tojiro features a 63 layered Damascus Steel blade with a VG-10 core. The blades are anodized black to highlight the elegant patterning.The chestnut wood handle is both beautiful and practical.
181,45 €

Sold out

Utility kitchen knife Seki Kanetsugu Zuiun Petty 9302 15cm
Sold out
Couteau de cuisine universel Seki Kanetsugu Petty 15cm 9302
Seki Kanetsugu Zuiun Petty knife 15 cm. The Zuiun is a special model manufactured to celebrate the company's centennial. Seki Kanetsugu Zuiun knives have blades with a wavy “hamon” pattern similar to Japanese swords. In its current incarnation, Seki Kanetsugu Cutlery has been making modern blades that realize the characteristics of Japanese swords--unbreakable, unbending and very sharp. The company also infused the Zuiun with the spirit of such swords. The blade is made of Damascus steel that uses powdered stainless steel SPG2 for the core material. Finely sharpened by artisans, the surface of the blade features a scudding cloud-like pattern. It is also forged into a V-shaped "hamaguri-ba" clam blade, reflecting a characteristic of Japanese swords.
169,90 €

Sold out

Gyuto Japanese kitchen knife Yu Kurosaki Fujin VG10 Damascus ZVD-210CHOWQ 21cm
Sold out
Gyuto Couteau Japonais Yu Kurosaki 21cm ZVD-210CHOWQ
Yu Kurosaki Chef knife, 21 cm. The handle is made this time of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Yu Kurosaki Fujin series fearture Nickel Damascus-patterned blades with a core of VG-10 stainless steel for professional with a hardness of 60-61 HRC, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. Handmade by Mr. Yu Kurosaki.
313,71 €

Sold out

Kiritsuke Japanese kitchen knife Hideo Kitaoka Shirogami CN-2216 24cm
Sold out
Kiritsuke Couteau Japonais Hideo Kitaoka Shirogami 24cm CN-2216
Handmade single-beveled kiritsuke knife by Mr. Hideo Kitaoka. 24 cm blade is made of carbon steel with Shirogami steel core Handle made of a natural pakkawood.  Hideo Kitaoka in Takefu, Fukui Province specializes in the production of high-quality single-edged kitchen knives. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
177,42 €

Sold out

Petty Japanese kitchen knife Shigeki Tanaka VG10 Damascus ST-1701 12cm
Sold out
Petty Couteau Japonais Shigeki Tanaka VG10 Damascus 12cm ST-1701
Petty knife handmade in Japan by Mr. Shigeki Tanaka. Blade length 12 cm. The blade is made of VG-10 premium Japanese steel. This knife has red western handle.  Only hand wash allowed.
104,03 €

Sold out

Santoku Japanese kitchen knife Miyabi 8000DP Hibana Rocking 54488-181-0 18cm
Sold out
Santoku Couteau Japonais Miyabi 800DP Hibana Rocking 18cm 54488-181-0
The Miyabi 800DP Hibana Rocking 54488-181-0 supports Western circular motion and Asian chopping. The versatile blade is ideal for chopping vegetables, slicing through meats and preparing fish. Sleek black and brass spacers on the handle add to the beauty and weight that promotes sturdiness in hand and maneuverability at the tip. The MIYABI Hibana collection features a beautiful 49-layer Spark Damascus pattern on the blade that both strengthens and protects the core of FC61 steel. FRIODURx2 hardening improves the microstructure of the steel for improved cutting performance, corrosion resistance and durability. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Handcrafted in Seki, Japan.
225,00 €

Sold out

Bunka Japanese kitchen knife Takeshi Saji VG10 Colored Damascus HI-11206 17cm
Sold out
Bunka Couteau Japonais Takeshi Saji VG10 Colored Damascus 17cm HI-11206
Bunka knife handmade by Takeshi Saji. The core of the colored damascus blade is made of premium japanese VG-10 steel. Blade length is 17 cm. The ash wood handle is both beautiful and practical. Takeshi Saji is a Chairman of Saji Blacksmith (Japan). Member of Japan Knife Guild and Japan Custom Knife Makers. In 1992, he was officially certified as Dentoukougeishi, a “Traditional Master Craftsman” by the Japanese “Ministry of International Trade & Industry”.
402,42 €

Sold out

Petty Japanese kitchen knife Shigeki Tanaka VG10 Damascus ST-1403 15cm
Sold out
Petty Couteau Japonais Shigeki Tanaka VG10 Damascus 15cm ST-1403
Petty knife VG10 Damascus ST-1403 handmade in Japan by Mr. Shigeki Tanaka. Blade length 15 cm. The blade is made of VG-10 premium Japanese knife steel. Petty knife made by Shigeki Tanaka has octagonal walnut handle. Only hand wash allowed.
135,48 €

Sold out

Sujihiki Japanese kitchen knife Yu Kurosaki Fujin VG-10 Damascus Rosenwood ZVD-270SLR 27cm
Sold out
Sujihiki Couteau Japonais Yu Kurosaki Fujin VG-10 Damascus Rosenwood 27cm ZVD-270SLR
Japanese damascus kitchen knife sujihiki handmade by Mr. Yu Kurosaki. VG-10 Damascus steel, rosenwood wood handles. The Sujihiki is a double edge slicing knife with a long narrow blade that smoothly slices through meat or vegetables. Weight is 185 g. Blade length of Sujihiki Fujin VG-10 Damascus Yu Kurosaki is 270 mm.
321,77 €

Sold out

Yanagiba Japanese kitchen knife Hideo Kitaoka Shirogami CN-2208 24cm
Sold out
Yanagiba Couteau Japonais Hideo Kitaoka Shirogami 24cm CN-2208
Handmade yanagiba knife by Mr. Hideo Kitaoka with a great Shirogami carbon steel on the 24 cm blade. Handle made of a natural pakkawood. The Yanagiba is a Japanese single-beveled knife, originally designed for sushi and sashimi. Hideo Kitaoka in Takefu, Fukui Province specializes in the production of high-quality single-edged kitchen knives. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
145,16 €

Sold out

Gyuto Japanese kitchen knife Sukenari Slender S-6412 27cm
Sold out
Gyuto Couteau Japonais Sukenari Slender 27cm S-6412
Kiritsuke Gyuto knife Sukenari Slender S-6412 with 27 cm blade. The blade is made of powder steel Damascus SG-2. Heat-treated to 63-64 HRC, the R2/SG2 powder steel offers extraordinary back-the-edge thinness and edge retention. This knife has a unique natural wooden texture of octagonal Bocote wood handle, which has a buffalo horn ferrule. This Sukenari japanese knife is not allowed to wash in dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese knives bones and meat with bones, coconuts and other nuts, other hard products.
523,39 €

Sold out

Santoku Japanese kitchen knife Kunio Masutani VG-10 Damascus M-3246 14cm
Sold out
Santoku Couteau Japonais Kunio Masutani VG-10 Damascus 14cm M-3246
Kunio Masutani santoku knife M-3246 with 15 cm blade. The very sharp, rustproof blades are ground on both sides and consist of a Damascus steel construction with a robust VG-10 core. The black handle is made of pakkawood. Not allowed to wash in dishwasher.
79,84 €

Sold out

Nakiri Couteau Japonais Kunio Masutani VG-10 Damascus M-3223 17cm
Sold out
Nakiri Couteau Japonais Kunio Masutani VG-10 Damascus 17cm M-3223
Kunio Masutani nakiri knife with 17 cm blade. The very sharp, rustproof blades are ground on both sides and consist of a Damascus steel construction with a robust VG-10 core and kokuryu finish. The black handle is made of pakka wood. Not allowed to wash in dishwasher.
87,10 €

Sold out

Santoku Couteau Japonais Kunio Masutani VG-10 Damascus M-3221 17cm
Sold out
Santoku Couteau Japonais Kunio Masutani VG-10 Damascus 17cm M-3221
Kunio Masutani santoku knife with 17 cm blade. The very sharp, rustproof blades are ground on both sides and consist of a Damascus steel construction with a robust VG-10 core and kokuryu finish. The black handle is made of pakka wood. Not allowed to wash in dishwasher.
88,71 €

Sold out

Santoku Couteau Japonais Yu Kurosaki Fujin VG10 Damascus Wenge ZVD-165SAW 16.5cm
Sold out
Santoku Couteau Japonais Yu Kurosaki Fujin VG10 Damascus Wenge 16.5cm ZVD-165SAW
Yu Kurosaki Santoku knife with wenge wood handle. Yu Kurosaki Fujin series fearture Nickel Damascus-patterned blades with a core of VG-10 stainless steel for professional with a hardness of 60-61 HRC, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Santoku Fujin VG10 Damascus Series is made of Octagonal-shaped wenge wood. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
215,32 €

Sold out

Nakiri Couteau Japonais Mcusta Zanmai Ultimate Unkai ZUU-1108D 16.5cm
Sold out
Nakiri Couteau Japonais Mcusta Zanmai Ultimate Unkai 16.5cm ZUU-1108D
Mcusta Zanmai Ultimate Unkai  Nakiri vegetable knife. Blade lenght is 165 mm. The blade of Mcusta Zanmai Ultimate Unkai  nakiri knife is made of of Damascus steel (VG-10), 33 layers. The handle is made of pakka wood with mosaic pin. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
258,06 €

Sold out

Gyuto Couteau Japonais Yu Kurosaki VG10 Forged Color Damascus ZVCD-240CHR 24cm
Sold out
Gyuto Couteau Japonais Yu Kurosaki VG10 Forged Color Damascus 24cm ZVCD-240CHR
This Gyuto kitchen knife handcrafted by the Japanese craftsman Yu Kurosaki. The blade length is 24 cm. High quality materials and age old forging techniques combine to create a knife with an extremely sharp edge that will hold up throughout use. Crafted with a beautiful design using core steel VG10 forged colored damascus (polished). Handle is made of padouk. 
346,77 €

Sold out

Nakiri Couteau Japonais Kenshiro Hatono VG10 Nickel Damascus, paper KH-P8 21cm
Sold out
Nakiri Couteau Japonais Kenshiro Hatono VG10 Nickel Damascus, paper 21cm KH-P8
This japanese nakiri knife is handmade by Kenshiro Hatono. Blade 210 mm made of nickel damascus steel with VG10 core. Traditional handle made of japanese paper with lacquer. Nakiri knife is a classic Japanese style knife with a straight, symmetrical flat edge blade shape that is most commonly used for slicing, dicing, mincing, and chopping vegetables. Kenshiro Hatono is a talanted knife maker. Currently he is working in Takefu knife village. This Japanese handmade knife is not allowed to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
225,00 €

Sold out

Kiritsuke Couteau Japonais Kenshiro Hatono VG10 Nickel Damascus, paper KH-P6 21cm
Sold out
Kiritsuke Couteau Japonais Kenshiro Hatono VG10 Nickel Damascus, paper 21cm KH-P6
This japanese kiritsuke kitchen knife is handmade by Kenshiro Hatono. Blade 210 mm made of nickel damascus steel with VG10 core. Traditional handle made of japanese paper with lacquer. Kenshiro Hatono is a talanted knife maker. Currently he is working in Takefu knife village. This Japanese handmade knife is not allowed to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
217,74 €

Sold out