Filtra per
Prezzo
Produttori
Lunghezza lama, mm
Dimensione
Sex
Paese
Acciaio
Maniglia
Collezione
Durezza
Fodero
Chiusura
Materiale
Filtro
Sold out
Coltello da cucina Petty Mutsumi Hinoura Shirogami 2 15cm MHN-1103BR
The petty knife with a blade length of 15 cm is handcrafted by Mutsumi Hinoura. Ideal for cutting vegetables and meat that are too small for a Chef’s knife. Blade of this petty knife is made of Shirogami #2 iron clad steel. The ergonomic handle is made of oak. This  knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. Weight 155 gr.
165,32 €

Sold out

Sold out
Gyuto (coltello da chef) Coltello da cucina Ittetsu VG-10 Damascus 21cm IWZ-104
An excellent knife Gyuto IWZ-104 from Ittetsu with a blade length of 21 cm for chopping and slicing fish, meat, vegetables and fruits. The blade is made of high quality VG10 Damascus steel, hammer finish. The octagonal handle is made of pakkawood wood. This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 250 gr.
129,03 €

Sold out

Sold out
Coltello da cucina Daisuke Nishida Funayuki 16.5cm DN-11211
The Funayuki DN-11211 knife is forged by Daisuke Nishida and is one of the greatest, magnificent examples of Japanese knives. Funayuki was originally used by fishermen to prepare meals at sea. This is a universal knife, it is equally convenient for them to butcher medium-sized fish, butcher its fillet and cut vegetables. Funayuki combines the look of a deba, a nakiri, and a yanagiba. Blade 165 mm is made of carbon steel Shirogami No. 1 by forge welding with a black coating. The Daisuke Nishida Funayuki has an octagonal walnut handle with a maple ring. The bolster is made of Macassar ebony wood. This knife cannot be washed in the dishwasher. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Daisuke Nishida knives due to handmade may differ slightly from those shown in the photos and sizes. Weight 240 gr.
137,10 €

Sold out

Sold out
Coltello da cucina Goko Hamono Shirogami S/S Clad Honesuki 15cm GHO-0101
Honesuki knife, handmade by Goko Hamono workshop. Honesuki is similar to a boning knife, it is intended for processing meat. The blade is 150 mm long and is made of Shirogami 1 steel with stainless steel cladding. Traditional Japanese wa handle is made of rosewood. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
192,74 €

Sold out

Sold out
Coltello Fisso Sheffield Knives Green River 12.4cm SHE012
The J. Adams Sheffield England Green River SHE012 knife is 22.8 cm long. The carbon steel blade is 12.4 cm long. The handle is made of wood. Comes with a black leather belt sheath. 
31,45 €

Sold out

Sold out
Coltello da tasca Roper Knife and Tin Combo AB051S1Y
The Roper Knife and Tin Combo is a set of 2 knives with satin-finish stainless steel blades. The handle is made of yellow Delrin. The model has a bolster(s) made of stainless steel. Inlay shield. Includes knife 3.5", 8,89cm closed with drop point blade; and knife 3.5" , 8,89 cm closed stockman with clip, sheepsfoot, and spey blades. Comes with Roper knives tin.
26,61 €

Sold out

Sold out
Coltello da tasca Spartan blades Astor CF/G10 9.2cm SFBL8CF
The ASTOR is first folding knife created in collaboration of Spartan Blades with prolific knife maker Les George. 4.75" (12.07cm) closed. 3.75" (9.53cm) stonewash finish CTS-XHP stainless blade. Lanyard hole. Pocket clip. Thumb stud. Black G10 and carbon fiber handle.
108,06 €

Sold out

Sold out
Coltello da tasca Sniper Bladeworks DMF OD 9.2cm SBDMFODGS
This Sniper Bladeworks DMF comes is 4.75" (12.07cm) closed. 3.63" (9.22cm) satin finish S35VN stainless blade. OD green and gold G10 handle. Thumb stud. Lanyard hole. Pocket clip
402,42 €

Sold out

Sold out
Coltello da tasca Spartan blades Shoto 7.6cm SFBL9BK
The Shoto folding knife from company Spartan Blade is a 5.25" (13.34cm) closed. Designed by Tu Lam from Ronin Tactics. 3" (7.62cm) black stonewash finish CTS-XHP stainless blade. Black textured G10 handle. Finger ring. Extended tang. Pocket clip.
133,87 €

Sold out

Sold out
Coltello da tasca Böker Plus Tech Tool Orange 7.1cm 01BO558
In this high-end version, the popular Tech Tool Orange 01BO558 from Böker Plus is supplied with diagonally textured handle scales made of high-strength G10. G10 is a versatile laminate, this grade is a continuous glass woven fabric base impregnated with an epoxy resin binder. It has extremely high mechanical strength. It is very dense, lightweight, and impervious to water. The blade is made of high-quality material Sandvik 12C27 steel. The Drop point blade with a hardness of 58-60 HRC has an impressive satin finish and is opened by nail nick. Supplied with a clip and the integrated glass breaker.
Available for pre-order from 09/22/2023
46,73 €

Sold out

Sold out
Coltello Fisso Sheffield Knives Commando 17.8cm SHE007
Sheffield Commando Dagger is 12" overall. 7" mirror finish carbon steel dagger blade. Black knurled metal alloy handle. Metal alloy guard and pommel. Sykes Fairbairn Pattern. Black leather sheath. Bulk packed.Made in Sheffield, England.
96,77 €

Sold out

Sold out
Coltello Fisso Spartan blades George Raider 17.7cm SBBL3BK
Spartan Blades George Raider Dagger is 12" (30.48cm) overall. 7" (17.78cm) black powder coated SK5 carbon steel dagger blade. Black nylon handle. Full tang. Black plastic belt sheath. Boxed.
144,35 €

Sold out

Sold out
Coltello Fisso Extrema Ratio Suppressor Trentennale GIS 17.6cm 04.1000.0312/BLK-30
Suppressor Trentennale from Extrema Ratio is the memorial dagger, issued to commemorate the thirtieth anniversary of the unit G.I.S., the renowned counter-terrorism unit of the Carabinieri (Italian military police). Suppressor Trentennale GIS is a commemorative limited and numbered series of 1000 daggers, bearing both historical and current unit logos. Comes in a hand-polished, clear plexiglass display case. Blade 176 mm (6,9 in), Böhler N690 steel. Weight 302 g (10.7 oz)
631,45 €

Sold out

Sold out
Coltello da tasca CH Knives 3519 Variety Exclusive Black Titanium 9.7cm 3519-BK
CH knives 3519 Variety Exclusive Black Titanium EDC folding knife. The blade is made from S35VN powder stainless steel with a black stonewashed finish. Black titanium handle scales provide a comfortable grip and a resilient build, comes with pocket clip and lanyard hole. 3519 Variety Exclusive Black knife offers a remarkable combination of tactical functionality and a refined, stylish appearance. Weight is 4.55 oz (133g).
144,35 €

Sold out

Sold out
Gyuto (coltello da chef) Coltello da cucina Miyabi 5000MCD 67 20cm 34401-201-0
Zwilling Miyabi 5000MCD 67 japanese gyutoh or chef's knife has a MicroCarbide powder steel MC66 core which gives extremely good sharpness and cutting edge retention. The blade has 132 outer layers of steel which surround the core and make up the unique Damascus-design pattern on the blade. The cutting edge is Honbazuke-honed and symmetrical (not single bevel), so can be used by those both right and left-handed. There is no finger guard so the whole length of the cutting edge can be used. The black Ash wood handle sits comfortably in the hand, allowing firm control and tireless working. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Rockwell hardness of approximately 66. Zwilling Miyabi 5000MCD 67 gyotoh chef's knife made in Japan.
362,10 €

Sold out

Sold out
Santoku Coltello da cucina Miyabi 5000FCD RAW 18cm 34684-181-0
MIYABI 5000 FCD Santoku, 18cm blade length. This Japanese santoku has a hard fine carbide steel core for very good cutting edge retention and sharpness. Santoku translates as "Three Virtues", these being meat, fish and vegetables. The flat cutting edge lends itself to a chopping motion rather than the rocking cutting movement of European chef's knives. The blade core is surrounded by 48 outer layers of steel which make up the unique Damascus-design pattern on the blade. The cutting edge is Honbazuke-honed and symmetrical (not single bevel), so can be used by those both right and left-handed. There is no finger guard so the whole length of the cutting edge can be used. The handle and half-bolster join seamlessly for comfortable use. The smooth surface helps to prevent the formation of calluses on the thumb and forefinger. Hand wash only for best care, and maintain and sharpen using a whetstone. We’d recommend using a wooden chopping board rather than glass, ceramic or stone boards as these will dull the cutting edge. - FC61 fine carbide steel blade core; - 48 layers of steel surrounding the core create the Damascus-design; - FRIODUR ice-hardened for extreme hardness; - Rockwell hardness of approximately 61; - Symmetrical cutting edge; - Pakka wood handle; - Steel mosaic pin and handle end cap; - Made in Japan.
206,45 €

Sold out

Sold out
Coltello da tasca Böker Plus Tech Tool Blue 7.1cm 01BO557
In this exceptional high-end version, the popular Böker Plus Tech Tool Blue 01BO557 is supplied with diagonally textured handle scales made of high-strength G10. G10 is a versatile laminate, this grade is a continuous glass woven fabric base impregnated with an epoxy resin binder. It has extremely high mechanical strength. It is very dense, lightweight, and impervious to water. The blade is made of high-quality material Sandvik 12C27 steel. The Drop point blade with a hardness of 58-60 HRC has an impressive satin finish and is opened by nail nick. Supplied with a clip and the integrated glass breaker.
46,73 €

Sold out

Sold out
Kupilka 21 Little My Cup Red M2140R0 3021LM403
Kupilka 21 Little My Red M2140R0 is a graceful cup and classic drinking vessel. The new era of outdoor dining started from this very cup. Already in the old times the shape of KUPILKA 21 was used due to its practicality. This cup keeps your hot drink hot without burning your fingers. Color red. Volume 2,1 dl / 7.10 fl oz. Weight 83 g / 2.93 oz. Height 60 mm x width 93 mm x length 165 mm.
The ecological Kupilka dishware can withstand boiling hot water and sub-zero temperatures as cold as -30°C. The dishes can be washed by hand in the wild or in the dishwasher back home. The products are manufactured from biomaterial using EKOenergy, and each item ages beautifully yet keeping its qualities. You can check how fresh the product is from its wooden scent – the stronger the scent, the newer the product! To ensure the longevity of the dishes, we do not recommend putting them in the microwave, stove or open fire. At the end of their life span, the products can be recycled, incinerated for heat energy or returned to the manufacturer for re-use.
Little My is brave and fearless, and is eager to join the Moomins on their adventures. Sometimes she really seems to love small catastrophes. She is fiery and irritable – but also happy and friendly. Small things may easily annoy her, but she never does mean things on purpose. Sometimes, when others are being overly sentimental, she brings them quickly back to earth with her acute observations. Little My likes to find out people’s secrets, but she never reveals them to others. In spite of her wild and reckless acts, Little My is honest and reliable. She’s at home in every situation – she’s prepared for anything.
21,57 €

Sold out

Sold out
Coltello Fisso Marttiini Wild Boar in gift box 11cm 546013W
The latest addition to Marttiini animal-themed bushing knives is the Wild Boar knife. The bushing of the Marttiini Wild Boar is the noble wild boar head cast in bronze. The curly birch handle is color waxed to withstand use and to ensure a good grip. The blade is made of durable stainless steel. The knife is delivered in an elegant wooden gift box
140,31 €

Sold out

Sold out
Macete Condor Tool & Knife Golok 36cm CTK41014HCS
The Golok CTK41014HCS features a black powder coated 1075HC steel blade. The walnut handles enhance both the look and function of this knife while delivering durable, lasting performance. Edge is honed to razor sharpness. The included sheath is made from heavy duty leather. Weight of  Machete is about 1,56 kg.
104,02 €

Sold out

Sold out
Coltello Sopravvivenza Condor Tool & Knife Moonshiner 22.8cm CTK2359HC
The knife Moonshiner CTK2359HC features a 1075HC steel blade. Edge is honed to razor sharpness. This knife features a heavy duty drop point blade made of durable high carbon steel, ready to tackle sizeable chores. It has a sharpened top edge, which makes it equipped for piercing, slicing, and chopping tasks.The wood handle enhance both the look and function of this knife while delivering durable, lasting performance. There is a lanyard hole in the end. The included black sheath belt is made from heavy duty leather. Weight of Moonshiner is about 0,569 kg.
86,21 €

Sold out

Sold out
Coltello Fisso Cold Steel Kobun OD Green 13.9cm 17TODST
Cold Steel Kobun 17TODST with satin finish AUS-8A stainless tanto blade. It is a knife that takes its name from the Japanese underworld, where the word "Kobun" is sometimes used as an indicator of rank that suggests the word "soldier"in, or one who takes orders from his "Oyabun" or boss. It's a fitting name for a knife like the Kobun, which was effectively designed to be "a good soldier"in. Proven to be incredibly popular with the Military, where it's prized for its light weight and discreet profile as much as its durability and cutting potential. The Kobun features Cold Steels iconic reinforced "American Tanto" point, making it highly resistant to bending or breaking because it is reinforced by the full thickness of the blade's spine (which runs almost to the very tip of the blade). Despite its thin profile, the Kobun's deeply checkered Kray-Ex handle is designed to offer maximum grip and is contoured to resist turning or shifting in the hand.
35,00 €

Sold out

Sold out
Coltello Fisso Cold Steel Kobun OD Green 13.9cm 17TODBK
Cold Steel OD Green Kobun CS17TODBK knife with black blade and green handle. The Kobun features Cold Steels iconic reinforced "American Tanto" point, making it highly resistant to bending or breaking because it is reinforced by the full thickness of the blade's spine (which runs almost to the very tip of the blade). Despite its thin profile, the Kobun's deeply checkered Kray-Ex handle is designed to offer maximum grip and is contoured to resist turning or shifting in the hand.
40,00 €

Sold out

Sold out
Coltello Fisso Cold Steel Kobun 13.9cm 17TBKBK
Cold Steel Kobun knife with a black blade. The blade is made of AUS8A high quality steel. Ergonomic Kray-Ex handle and secure-ex sheath. The total length is 25 cm.  
40,00 €

Sold out