Filtra per
Prezzo
€ €
Produttori
Lunghezza lama, mm
Dimensione
Sex
Paese
Acciaio
Maniglia
Collezione
Durezza
Fodero
Chiusura
Materiale
Filtro
Tactical knife Extrema Ratio Fulcrum Bayonet Black
Sold out
Coltello Fisso Extrema Ratio Fulcrum Bayonet Black 18cm 0410000301BLK
 This Tactical knife Extrema Ratio Fulcrum Bayonet Black is extremely versatile and strong, capable of sustaining loads of over 150 kilograms. Handle made of elastic Forprene material. The tanto-shaped blade allows for large amounts of work and wear while still keeping a sharp edge at its exceedingly sturdy tip. This feature, combined with a sharp false edge (in the military versions only), makes the knife retain sufficient combat penetration capability to engage targets covered in heavy clothing, paddings or soft ballistic protections. Thanks to its weight and top-heavy balancing, the FULCRUM BAYONET blade is suitable for hard work on the field.
382,00 €

Sold out

Japanese kitchen knife Bunka Daisuke Nishida Forge-welded Shirogami 1 DN-11225 18cm
Sold out
Bunka Coltello da cucina Daisuke Nishida Forge-welded Shirogami 1 18cm DN-11225
The Bunka Daisuke Nishida DN-11225 knife is forged by Daisuke Nishida and is one of the greatest, magnificent examples of Japanese knives. Blade 180 mm is made of carbon steel Shirogami No. 1 by forge welding with a black coating. The Daisuke Nishida Bunka has an octagonal walnut handle with a maple ring. The bolster is made of Macassar ebony wood. This knife cannot be washed in the dishwasher. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Daisuke Nishida knives due to handmade may differ slightly from those shown in the photos and sizes. Weight 250 gr.
144,35 €

Sold out

Santoku Japanese kitchen knife Miyabi 5000FCD 34684-181-0 18cm - 1
Sold out
Santoku Coltello da cucina Miyabi 5000FCD RAW 18cm 34684-181-0
MIYABI 5000 FCD Santoku, 18cm blade length. This Japanese santoku has a hard fine carbide steel core for very good cutting edge retention and sharpness. Santoku translates as "Three Virtues", these being meat, fish and vegetables. The flat cutting edge lends itself to a chopping motion rather than the rocking cutting movement of European chef's knives. The blade core is surrounded by 48 outer layers of steel which make up the unique Damascus-design pattern on the blade. The cutting edge is Honbazuke-honed and symmetrical (not single bevel), so can be used by those both right and left-handed. There is no finger guard so the whole length of the cutting edge can be used. The handle and half-bolster join seamlessly for comfortable use. The smooth surface helps to prevent the formation of calluses on the thumb and forefinger. Hand wash only for best care, and maintain and sharpen using a whetstone. We’d recommend using a wooden chopping board rather than glass, ceramic or stone boards as these will dull the cutting edge. - FC61 fine carbide steel blade core; - 48 layers of steel surrounding the core create the Damascus-design; - FRIODUR ice-hardened for extreme hardness; - Rockwell hardness of approximately 61; - Symmetrical cutting edge; - Pakka wood handle; - Steel mosaic pin and handle end cap; - Made in Japan.
206,45 €

Sold out

Japanese kitchen knife Bunka Ittetsu Tall Shirogami IW-11842 18cm
Sold out
Bunka Coltello da cucina Ittetsu Tall Shirogami 18cm IW-11842
Tall bunka knife with a wide 57x180 mm blade. Weight 400 g. This kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
149,19 €

Sold out

Kitchen knife set Opinel Les Forgés 1890 Trio 002292
Sold out
Set di coltelli da cucina Opinel Les Forgés 1890 Trio 002292
The kitchen knife set Opinel Trio 002292 from the Les Forgés 1890 collection consists of a chef's knife, a carving knife and a utility knife. Full forged, these three exceptional knives are a must-have in your kitchen. The handle is in beechwood from sustainably managed forests and it is no varnished. It is stabilized to improve water resistance. Its ergonomic design is an homage to the traditional pocket knife and provides outstanding grip comfort. The blade is made of X50CrMoV15 stainless steel is highly anti-corrosive and ensure a perfect cut.
Blade length:

chef's knife 20cm
carving knife 8cm
utility knife 16cm
273,39 €

Sold out

Garden knife Opinel No18 Saw Beech 001198 18cm
-10% Sold out
Coltello da giardino Opinel No18 Saw Beech 18cm 001198
This effective pocket Opinel No18 Saw Beech 001198 with a 18cm blade which cuts branches effortlessly. A saw with a 18cm blade which cuts branches effortlessly. Two rows of razor-sharp teeth turned towards the handle. Effortless cutting achieved simply by puling. Carbon steel blade with anti-corrosion coating guaranteeing both excellent cutting quality and protection against corrosion. The security system, the Virobloc®, blocks the blade in open position and closed position. 
33,39 €
37,10 €

Sold out

Gyuto Japanese kitchen knife Yoshimi Kato Aogami super D-504 18cm
Sold out
Coltello da cucina Gyuto (coltello da chef) Yoshimi Kato Aogami super 18cm D-504
Il coltello da chef giapponese Gyuto è forgiato a mano da Yoshimi Kato, un artigiano tradizionale certificato di Takefu, nella prefettura di Fukui, in Giappone. La lama è realizzata in 3 strati con anima in acciaio al carbonio Aogami. Lunghezza lama 180 mm. Manico in ciliegio. Lavare a mano con acqua tiepida e asciugare con un panno. Evitare ossa, cibi surgelati, noci e caramelle dure.
205,65 €

Sold out

Santoku Japanese kitchen knife Miyabi 8000DP Hibana Rocking 54488-181-0 18cm
Sold out
Santoku Coltello da cucina Miyabi 800DP Hibana Rocking 18cm 54488-181-0
The Miyabi 800DP Hibana Rocking 54488-181-0 supports Western circular motion and Asian chopping. The versatile blade is ideal for chopping vegetables, slicing through meats and preparing fish. Sleek black and brass spacers on the handle add to the beauty and weight that promotes sturdiness in hand and maneuverability at the tip. The MIYABI Hibana collection features a beautiful 49-layer Spark Damascus pattern on the blade that both strengthens and protects the core of FC61 steel. FRIODURx2 hardening improves the microstructure of the steel for improved cutting performance, corrosion resistance and durability. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Handcrafted in Seki, Japan.
225,00 €

Sold out

Kiritsuke Japanese kitchen knife Zwilling J.A.Henckels Twin Fin II 30923-231-0 23cm
Sold out
Kiritsuke Coltello da cucina Zwilling J.A.Henckels Twin Fin II 23cm 30923-231-0
Kiritsuke Japanese kitchen knife Zwilling J.A.Henckels Twin Fin II 30923-231-0  is intended as a general purpose knife for use in preparing traditional Japanese cuisine. With a FRIODUR ice-hardened blade made of Nitro 60 special formula stainless steel, these knives boast long-lasting durability. The curved bolster acts as an extension of the hand and the ergonomic steel handle with gilled design is hygienic and exceptionally well balanced, promoting fatigue-free cutting even for the largest chopping tasks. Ideal for preparing vegetables, meat and fish. Made in Seki, Japan. Dishwasher safe.
87,90 €

Sold out

Santoku Japanese kitchen knife Zwilling J.A.Henckels Twin Fin II 30917-181-0 18cm
Sold out
Santoku Coltello da cucina Zwilling J.A.Henckels Twin Fin II 18cm 30917-181-0
Comfortable santoku knife Zwilling J.A.Henckels Twin Fin II 30917-181-0 is suitable for cutting, chopping, dicing and mincing. With a FRIODUR ice-hardened blade made of Nitro 60 special formula stainless steel, these knives boast long-lasting durability. The curved bolster acts as an extension of the hand and the ergonomic steel handle with gilled design is hygienic and exceptionally well balanced, promoting fatigue-free cutting even for the largest chopping tasks. Ideal for preparing vegetables, meat and fish. Made in Seki, Japan. Dishwasher safe.
87,90 €

Sold out

Gyuto Japanese kitchen knife Daisuke Nishida Shirogami Bocote DN-11212BGA
Sold out
Gyuto (coltello da chef) Coltello da cucina Daisuke Nishida Shirogami Bocote 18cm DN-11212BGA
Gyuto Japanese chef knife handmade by Daisuke Nishida. Blade length 180 mm. Blade of this chef knife is made of Shirogami carbon steel with iron clad. Daisuke Nishida gyuto has handle made of bocote wood. This  knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by Japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. Daisuke Nishida knives due to hand-made may slightly differ from the pictures and dimensions shown. 
137,10 €

Sold out

Chef knife Zwilling J.A.Henckels Bob Kramer Euro Stainless Damask 34897-181-0 18cm - 1
Sold out
Coltello da cucina Zwilling J.A.Henckels Euro Stainless Damask Bob Kramer Santoku 18cm 34897-181-0
Zwilling Bob Kramer Santoku kitchen knife 18 cm from the series Euro Stainless Damask is ideal for recipes of Asian cuisine. Santoku is an all-rounder in the kitchen thanks to its polished finish on the cutting edge, which can be used particularly well for preparing meat, fish and vegetables. With the 18 cm long blade, you can easily process even larger vegetables such as pumpkins.The blade has beautiful unique Damask patterning and a hard core of SG2 powder steel enclosed within 100 layers of two different steels. CRYODUR® ice-hardened blades are particularly cut-resistant, corrosion-resistant and have the best blade flexibility.The non-slip handle with ergonomic shape for comfortable cutting is made of micarta (multilayer material made of linen and synthetic resin), with stainless steel rivets and decorative logo pin. The handl is particularly dimensionally stable and moisture-resistant.It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.Zwilling Bob Kramer Santoku kitchen knife is made in Japan.
325,80 €

Sold out

Japanese kitchen knife Ittetsu Usuba Shirogami 2 IJF-11141 18cm
Sold out
Coltello da cucina Ittetsu Usuba Forge-welded 18cm IJF-11141
Designed specifically for cutting vegetables the Japanese kitchen knife Ittetsu Usuba IJS-11141 with 180 mm forge-welded blade made of Shirogami #2 carbon steel. As another tool in the kitchen, the Usuba knife can become invaluable when preparing traditional Japanese cuisine. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
108,87 €

Sold out

Utility kitchen knife Zwilling J.A.Henckels Pro Santoku 38418-181-0 18cm - 1
Sold out
Coltello da cucina Zwilling J.A.Henckels Pro Santoku 18cm 38418-181-0
This ZWILLING® Pro Rocking Santoku knife is a typical Asian multi-purpose knife with a 18 cm blade. Its scalloped kullen edge stops food from sticking so the knife can also be used to make dishes such as carpaccio. The blade is made from ZWILLING special formula steel and has a RAZOR EDGE finish, which facilitates an effortlessly precise cut. Its ergonomic plastic handle is also comfortable to hold. The Rocking Santoku knife is the ideal cooking companion and will help you cut up meat, fish and vegetables with ease.

FRIODUR® ice-hardened blade for exceptional durability of the cutting edge and corrosion resistance.
Stainless special formula steel, ZWILLING specially fused materials: These knives are robust, corrosion-resistant and flexible at the same time.
SIGMAFORGE® knife – one-piece precision forging
V-edge: The two-level V-edge-grinding also provides for lasting sharpness and offers long-lasting highly precise cutting performance.
Ergonomic plastic handle with three-rivet design: For fatigue-free and safe working with the knife.
91,94 €

Sold out

Nakiri Coltello da cucina giapponese Ittetsu Shirogami Tall IW-11839 18cm
Sold out
Nakiri Coltello da cucina Ittetsu Shirogami Tall 18cm IW-11839
Japanese Tall Nakiri knife Ittetsu with 180 mm blade. Tall nakiris are longer and taller than a normal nakiri knife. This one is 65 mm tall.  This nakiri is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
144,35 €

Sold out

Bunka Japanese kitchen knife Ittetsu Shirogami IW-11835 18cm
Sold out
Bunka Coltello da cucina Ittetsu Shirogami 18cm IW-11835
Japanese bunka knife Ittetsu with 180 mm blade. This kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
136,29 €

Sold out

Coltello da cucina giapponese Gyuto (coltello da chef) Ittetsu Shirogami IW1187 18cm
Sold out
Coltello da cucina Gyuto (coltello da chef) Ittetsu Shirogami 18cm IW1187
Japanese chef knife gyuto Ittetsu with 18 cm blade. Blade is made of Shirogami Iron Clad steel. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. The Gyuto is the Japanese equivalent to a standard western style chef's knife and is an essential for the professional cook/chef.
123,39 €

Sold out

Gyuto (coltello da chef) Coltello da cucina giapponese Ryusen Hamono Blazen Wa BZ-405 18cm
Sold out
Gyuto (coltello da chef) Coltello da cucina Ryusen Hamono Blazen Wa 18cm BZ-405
Ryusen Hamono Blazen Wa chef knife with 18 cm blade and perfectly redesigned Japanese octagonal handle. Blazen series are constructed out of a core of SG-2, sandwiched between 2 layers of stainless steel. The beautiful lines of damascus steel on the blade end up in a higher positioned Nashiji finish. Esthetically intriguing and in combination with the thin blade, it also provides little resistance while cutting. The combination of handle, weight, balance and the extremely thin and sharp cutting edge give tremendous comfort while cutting.
250,00 €

Sold out

Gyuto (coltello da chef) Coltello da cucina giapponese Ryusen Hamono Bonten Unryu BU-305 18cm
Sold out
Gyuto (coltello da chef) Coltello da cucina Ryusen Hamono Bonten Unryu 18cm BU-305
Japanese chef knife Ryusen Hamono Bonten Unryu Wa with 18 cm blade. The Bonten Unryu is one of the signature lines by Ryusen. It is considered as one of the best VG10 line by any Japanese maker, because of its unmatched artistics and more importantly, their VG10 blades are hande forged one-by-one. The blade of the Unryu wa series, is constructed identical as the western handle Unryu series.It has a core of VG-10, with 63 layers of stainless damascus steel. The blade is relatively thin, with a medium / light weight, but not as thin as a laser. Due to the classic Japanese perfectly shaped octagonal handle, it is easy to control and effortlessly will do exactly what it is made for cutting perfectly. The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Gyuto  knife goes in black gift box.
217,74 €

Sold out

Santoku Japanese kitchen knife Mcusta Classic Pro Zebra HFZ-8003D 18cm - 1
Sold out
Santoku Coltello da cucina Mcusta Zanmai Classic Pro Zebra 18cm HFZ-8003D
Mcusta Zanmai Classic Pro Zebra Santoku knife. Blade lenght is 18 cm. Santoku means 'Three Virtues' or 'To solve Three Problems'. The virtues or problems are slicing, dicing and mincing. The blade of Mcusta Zanmai Classic Pro Zebra santoku knife is made of of Damascus steel (VG-10), 33 layers. The handle is made of pakka wood with mosaic pin. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
170,97 €

Sold out

Coltello da cucina giapponese Kunio Masutani VG-1 Damascus Walnut M-2762 18cm
Sold out
Coltello da cucina Kunio Masutani VG-1 Damascus Walnut 18cm M-2762
Kunio Masutani chef knife with 18 cm blade. The very sharp, rustproof blades are ground on both sides and consist of a Damascus steel construction with a robust VG-1 core with a hardness of 60HRC. The octagon-shaped handle is made of walnut wood and is equipped with a clamp made of pakka wood. Not allowed to wash in dishwasher.
120,97 €

Sold out

Santoku Coltello da cucina giapponese Miyabi 5000MCT MIZU 32917-181-0 18cm
Sold out
Santoku Coltello da cucina Miyabi 5000MCT MIZU 18cm 32917-181-0
Miyabi MIZU 5000MCT Santoku Japanese chef´s knife with its measuring 18 cm in length is idealy suitable for cutting and chopping  vegetables, herbs and also meat, fish and other products. This series 5000MCT has a core of MC 63, microcarbide powdereel (63 HRC) covered with 2 layers of ice- hardened Cryodur stainless steel. Cutting edge has an angle of 19°. Hammered finish (Tsuchime) which prevents food from sticking to the blade and ergonomic handle of micarta. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Made in Seki, Japan.
225,00 €

Sold out

Gyuto (coltello da chef) Coltello da cucina giapponese Yu Kurosaki Fujin VG10 Damascus Keyaki ZVD-180CH 18cm
Sold out
Gyuto (coltello da chef) Coltello da cucina Yu Kurosaki Fujin VG10 Damascus Keyaki 18cm ZVD-180CH
Yu Kurosaki Chef knife, 18 cm. Yu Kurosaki Fujin series fearture Nickel Damascus-patterned blades with a core of VG-10 stainless steel for professional with a hardness of 60-61 HRC, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Chef knife Fujin VG10 Damascus Series is made of Octagonal-shaped keyaki wood. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
237,90 €

Sold out

Santoku Japanese kitchen knife Mcusta Supreme Ripple Damascus TZ2-4003DR 18cm - 1
Sold out
Santoku Coltello da cucina Mcusta Zanmai Supreme Ripple Damascus 18cm TZ2-4003DR
Mcusta Zanmai Supreme Ripple Damascus Santoku with 18 cm blade. Weight is 169 g. Mcusta Supreme Ripple Damascus series feature 33 layers of Damascus-patterned blades with a core of high carbon VG-10 stainless steel, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness.In addition, the unique Ripple pattern is originally created by the Zanmai technology, which you may never find it in the world.The design represents ocean and shore line. It's associated with a Japanese traditional picture in the Edo era.MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives and scissors at our stores are original and made is Seki city, Japan.Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
152,41 €

Sold out