Filtrer
Prix
€ €
Fabricants
Longueur des cordes, mm
Taille
Sex
Pays
Acier
Poignée
Série
Dureté
Etui
Verrouillage
Matériel
Filtrer
Folding knife Böker Plus Exskelibur II Framelock Micarta 01BO367 7.1cm
Sold out
Couteau pliant Böker Plus Exskelibur II Framelock Micarta 7.1cm 01BO367
Despite the more compact dimensions, the Folding knife Böker Plus Exskelibur II 01BO367 is in no way inferior to its big brother and shines with almost unchanged proportions.The textured front scales are made of olive green micarta and give the design, originally intended as a gentleman's knife, a rustic look. The Spearpoint blade made of D2 with a dark stonewash finish thus further emphasises the outdoor character of the pocket knife. It is opened by nail nick or front flipper and reliably locked by the sturdy stonewash framelock. Supplied with a convertible clip (tip-up/tip-down) and a high-quality nylon case for storage.
71,77 €

Sold out

Yanagiba Couteau Japonais Ittetsu Uraoshi Stamped Shirogami 2 IJS-11125 27cm
Sold out
Yanagiba Couteau de cuisine Ittetsu Uraoshi Stamped Shirogami 2 27cm IJS-11125
 Polished blade the knife Ittetsu Uraoshi Yanagiba IJS-11125 is made of Shirogami #2 carbon steel. The blade lenght is 270mm. Handle is made from magnolia and has good water resistance. This knife has a bevel on only one side of the blade, to help achieve even slices. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
96,77 €

Sold out

Yanagiba Couteau Japonais Ittetsu Uraoshi Stamped Shirogami 2 IJS-11124 24cm
Sold out
Yanagiba Couteau de cuisine Ittetsu Uraoshi Stamped Shirogami 2 24cm IJS-11124
The japanese knife Ittetsu Uraoshi Yanagiba IJS-11124 with 240mm blade. Polished blade is made of Shirogami #2 carbon steel. Handle is made from magnolia and has good water resistance. This knife has a bevel on only one side of the blade, to help achieve even slices. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
79,03 €

Sold out

Couteau Japonais Ittetsu Uraoshi Usuba Stamped IJS-11143 21cm
Sold out
Couteau de cuisine Ittetsu Uraoshi Usuba Stamped 21cm IJS-11143
Spécialement conçu pour couper les légumes, le couteau de cuisine japonais Ittetsu Uraoshi Usuba. Sa lame polie de 21 cm est en acier carbone Shirogami n° 2. Son manche ovale est en bois de magnolia. L'acier carbone est sensible à la rouille et doit être maintenu sec et propre en permanence pour éviter l'oxydation et la décoloration. Lavez à la main à l'eau tiède et essuyez avec une serviette. Les couteaux Ittetsu sont fabriqués à la main à Echizen, au Japon.
137,10 €

Sold out

Couteau Japonais Ittetsu Uraoshi Ajikiri Stamped IJS-11101 10.5cm
Sold out
Couteau de cuisine Ittetsu Uraoshi Ajikiri Stamped 10.5cm IJS-11101
Ajikiri is used for small fish, meat and vegetable. Also it's a paring knife in the can be used as a small paring knife. Japanese kitchen knife Ajikiri Ittetsu IJS-11101 with 105 mm polished blade made of Shirogami #2 carbon steel. The blade is single bevel Uraoshi. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
55,65 €

Sold out

Multi-tool Victorinox Vahva-Jussi 0.9023.3R2
Sold out
Outil multifonctions Victorinox Vahva-Jussi 0.9023.3R2
Victorinox Vahva-Jussia is a pocket knife with 14 tools, which includes blade, corkscrew, can opener with small screw, cap opener with screw and cord stripper, hollow and perforator, key ring, tweezers, toothpick, saw, scissors, Phillips screwdriver. Work faster and easier with this little bit of evolution that fits in your pocket. Weight is 150 g. Size is 111 mm.
70,92 €

Sold out

Folding knife Kanekoma Higonokami Medium BA-M 7cm
Sold out
Couteau pliant Kanekoma Higonokami Medium 7cm BA-M
A beautiful folding knife made in the best ancient Japanese traditions, the Kanekoma Higonokami Medium BA-M is designed for everyday use and will cope with any task assigned to it. The blade is made of the famous Japanese Aogami carbon steel. The brass handle is equipped with a lanyard hole. According to tradition, the knife does not have locking mechanisms, and the reliable fixation of the blade in the open state is ensured solely by the force of friction. Experience history personally with the Kanekoma Higonokami knife.
18,55 €

Sold out

Petty Couteau Japonais Mcusta Zanmai Forest HBG-6001M 12cm
Sold out
Petty Couteau de cuisine Mcusta Zanmai Forest 12cm HBG-6001M
Japanese kitchen knife Mcusta Zanmai Forest Petty with 120 mm blade. Mcusta Zanmai Forest Molybdenum Series is a great introduction to high quality Japanese knives. For this series, Zanmai forges each blade using Molybdenum Vanadium 8A steel and sharpens them utilizing Zanmai's famous Hamaguri V-Cut form. This grinding method results in incredibly sharp knives that are easy to use and maintain. The handle’s end caps are mirror finished and provide additional balance. The beautiful green micarta hangles are triple-riveted to complete this professional quality knife at an affordable price.
66,94 €

Sold out

Couteau Japonais Yoshimi Kato Katana Aogami Super S/S clad Cherry D-911 16cm
Sold out
Couteau de cuisine Yoshimi Kato Katana Aogami Super S/S clad Cherry 16cm D-911
Japanese utility kitchen knife made by Yoshimi Kato. Blade is made of Aogami Super steel with stainless steel clad. Blade length is 160 mm. Handle – cherrywood. Recommended hand wash with warm water and towel dry. Avoid bones, frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins.
177,42 €

Sold out

Parker Asahi Rubber cutting board Cookin'Cut L 40x23x1.3
Sold out
Parker Asahi Rubber cutting board Cookin'Cut L 40x23x1.3
Parker Asahi Rubber cutting board Cookin'Cut L is 40x23x1.3 cm. This is an authentic sanitary cutting board used by a lot of professional chefs. It has a texture similar to wood and moderate elasticity so that the blade gets less damage. Board is exclusively for cutting. It is unlikely to slip even on the stainless sink and safe. Weight-1,5 kg.
Also, it is unlikely to absorbs water and prevents proliferation of bacteria or mold. It is durable, scratch-proof and wear-resistant. It is even unlikely to be transformed by boiling sterilization and is stain/smell proof.
70,97 €

Sold out

Hasegawa Cooking board scrapper MC-115P
Sold out
Hasegawa Cooking board scrapper MC-115P
Hasegawa Cooking board scrapper is 115x50x30mm overall. Designed for rubbing the cutting board to smooth the surface. Consist of two sides: Rough and Smoother. Apply the rough side first and finish with smoother side. Can be used with other kitchen wear made of wood or resin.
10,08 €

Sold out

Paracorde Atwood Rope Neon Yellow RG1012H
Sold out
Paracorde Atwood Rope Neon Yellow RG1012H
Atwood Rope paracord 550, made in USA. It can be used to create braided bracelets, lanyards, belts, and is also used as a finished product in tourism and various household solutions. Color: Neon Yellow. Length 30,48m. The breaking strength is 249kg. The diameter of the paracord is 4 mm.
It is important to note that this type of paracord is not intended for use in mountaineering - its characteristics do not meet the requirements for climbing ropes, so its use for these purposes is strongly discouraged!
7,18 €

Sold out

Cold Steel Tanto Machete 97BTMS 33cm
Sold out
Cold Steel Tanto Machete 33cm 97BTMS
In tests the Tanto Machete 97BTMS cut and pierced exceptionally well while remaining tough enough to endure hard use. Its solid full-tang construction and hard wearing weather-resistant polypropylene handle only add to its durability and functionality.The Tanto Machete 97BTMS comes with a sturdy Cor-Ex sheath. Please, pay attention that due law restriction, Cold Steel exporting machetes not pre-sharped. 
43,55 €

Sold out

Training knife Cold Steel Parrying Dagger 92R88CD 36.8cm
Sold out
Training knife Cold Steel Parrying Dagger 36.8cm 92R88CD
The Cold Steel Parrying Dagger 92R88CD carefully fashioned to look as realistic as possible so it can be effectively used in solo practice, training drills, disarm drills, and demonstrations or any other activity where you want a reasonably close approximation of realism but not the extreme danger and risk associated with an actual knife. The black handle is made of rubber. The blade is made of rubber.
19,90 €

Sold out

Training knife Cold Steel FGX Push Blade II 92FPB 6.3cm
Sold out
Training knife Cold Steel FGX Push Blade II 6.3cm 92FPB
Dague d'entraînement Cold Steel FGX Push Blade II 92FPB. Elle ne rouille pas, ne se déforme pas, ne se fissure pas et ne se fend pas, même dans les environnements les plus difficiles. Suffisamment légère pour être attachée, rangée ou scotchée presque partout, elle résiste aux températures extrêmes, sauf au froid. Ce modèle est doté d'un trou pour dragonne. La lame à double tranchant est en Grivory. Le manche en kraton profondément quadrillé a été moulé directement sur la soie. Un couteau extrêmement léger.
10,28 €

Sold out

Training knife Cold Steel FGX Boot Blade II 92FBB 8.2cm
Sold out
Training knife Cold Steel FGX Boot Blade II 8.2cm 92FBB
The fixed blade Knife Cold Steel FGX Boot Blade II 92FBB is made of Griv-Ex. The handle of this knife is made from deeply checkered Kray-Ex that is molded directly onto the blade tangs. This offers a slightly tacky-feeling textured surface that will give you a decisive and secure grip whatever the weather. The blade is unaffected by moisture and never rust, warp, crack or split even in the most challenging environments. 
9,68 €

Sold out

Training knife Cold Steel Suburito 92BKM
Sold out
Training knife Cold Steel Suburito 92BKM
Le Cold Steel Suburito 92BKM est une arme d'entraînement ancestrale, conçue pour simuler le poids d'un véritable sabre japonais. Principalement destiné à l'entraînement en solo ou aux exercices de coupe, il inspire le respect par sa puissance de frappe exceptionnelle. Moulé par injection en polypropylène vierge haute résistance, avec un long manche et une pointe carrée, il est extrêmement résistant à la casse et ne rétrécit pas, ne pourrit pas, ne se fissure pas et ne se fendille pas, contrairement aux Suburito en bois. Conçu pour durer de nombreuses années, il fera de vous un meilleur sabreur s'il est utilisé avec soin. Doté d'une élégante finition grain de bois, il porte les cinq préceptes majeurs de la coupe au sabre japonais, écrits en caractères Kanji.
34,60 €

Sold out

Couteau de lancer Cold Steel La Fontaine 80TLFZ 20.3cm
Sold out
Couteau à lame fix Cold Steel La Fontaine 20.3cm 80TLFZ
Le couteau de lancer Cold Steel La Fontaine 80TLFZ est fortement courbé, avec un large pan, un tranchant tranchant et une pointe acérée, accentuée par un faux tranchant non affûté. Doté d'un protège-doigts intégré empêchant la main de glisser sur le tranchant et d'un manche effilé facile à retirer pour le lancer, le LaFontaine Thrower est une lame tranchante et tranchante, ainsi qu'un excellent couteau de lancer. Luke LaFontaine est un membre de longue date de l'équipe Cold Steel. Principalement connu pour son expertise des arts du sabre japonais, il est également un épéiste occidental chevronné, un escrimeur historique et un historien amateur. Alliant son amour des armes historiques à sa passion pour les films d'action et d'aventure « épée et sandales », Luke a conçu un couteau attrayant et amusant, polyvalent.
25,49 €

Sold out

Couteau pliant Cold Steel SR1 Tanto 62LA 10.1cm
Sold out
Couteau pliant Cold Steel SR1 Tanto 10.1cm 62LA
The Cold Steel SR1 Tanto 62LA features Andrew's Demko signature minimalist style, without flourishes or embellishments, just pure functional, practical design. The SR1 Tanto is made for work. Is made from American CPM-S35VN premium powdered steel. A good blade needs a good handle, so the SR1's handle is made from premium G-10 with heat treated nested steel liners. With a coarse-textured surface for a secure grip even in cold, wet conditions, and expertly contoured to allow for a comfortable and safe grip even while wearing heavy gloves. For added reliability and peace of mind, equipped the SR1 with Tri-Ad locking mechanism - proven over time to weather the worst abuse, with unparalleled shock and impact resistance - making this knife the ideal choice for a survival rescue blade.
145,00 €

Sold out

Couteau de cou Cold Steel Drop Point Spike 53NCC 10.1cm
Sold out
Couteau à lame fix Cold Steel Drop Point Spike 10.1cm 53NCC
 The Cold Steel Drop Point Spike 53NCC neck knive is slim, light and super-tough. Razor sharp, zero ground blade, are complemented by heavily scalloped, textured handle scales that offer a comfortable and secure grip. The Spike's ergonomic handle feature Integral quillons that provide a safe stop for index finger and thumb, while deeply textured and sculpted Griv-Ex provides excellent positive traction even when your hands are cold, wet and slippery. Each Spike is supplied complete with a Secure-Ex sheath that provides excellent retention and safety.
31,30 €

Sold out

Santoku Couteau Japonais Yu Kurosaki Fujin VG10 Damascus Wenge ZVD-165SAW 16.5cm
Sold out
Santoku Couteau de cuisine Yu Kurosaki Fujin VG10 Damascus Wenge 16.5cm ZVD-165SAW
Yu Kurosaki Santoku knife with wenge wood handle. Yu Kurosaki Fujin series fearture Nickel Damascus-patterned blades with a core of VG-10 stainless steel for professional with a hardness of 60-61 HRC, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Santoku Fujin VG10 Damascus Series is made of Octagonal-shaped wenge wood. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
215,32 €

Sold out

Couteau à lame fix Cold Steel Drop Forged Bowie 36MD 17.1cm
Sold out
Couteau à lame fix Cold Steel Drop Forged Bowie 17.1cm 36MD
The Cold Steel Drop Forged Bowie 36MD has total length of 11,25 inches and features a 6,75 inch blade, it shares the robust construction, being forged as a single piece of steel, giving it a startling amount of strength. One piece 52100 high carbon steel construction. The Drop Forged Series, it comes with a military grade, Secure-Ex™ sheath that includes a detachable Cordura belt loop.
63,71 €

Sold out

Couteau pliant Cold Steel Bush Ranger 31A 8.9cm
Sold out
Couteau pliant Cold Steel Bush Ranger 8.9cm 31A
Longtime Cold Steel customers may remember the original Bush Ranger, a fixed-blade field knife from years past that was designed by Lynn C. Thompson. One of its major strong-suits was its extremely comfortable handle. Mike Wallace drew inspiration from that knife to create a folding field knife that also feels great in the hand for extended periods of time without causing fatigue. The new Cold Steel Bush Ranger 31A is perfect for the hunter or survivalist who wants something midweight, yet is a real workhorse. While designed for tough work in the field, it's equally at home in a pair of jeans or slacks for everyday carry (EDC). If you like having lots of choices when you carry, the Bush Ranger's got them; from a lanyard hole, to its ambidextrous pocket clip options, and the ability to easily deploy from your pocket thanks to Andrew Demko's patented Thumb Plate. You can be sure your fingers are safe no matter the task at hand, as the Bush Ranger features Cold Steel's Tri-Ad lock, the strongest and safest folding knife lock on the market. Featuring a 3 ½" American-Made S35VN Sheffield clip point blade and a CNC machined American G-10 handle, this premium folder will proudly give you many years of service.
142,93 €

Sold out

Couteau pliant Wander Tactical Mistral K200G 8.9cm
Sold out
Couteau pliant Wander Tactical Mistral 8.9cm K200G
Folding knife Wander Tactical Mistral is a rugged folding tactical knife equipped with a durable D2 blade. The blade has a protective coating. The knife is powered by a flipper or thumb stud. The green micarta handle features a non-slip textured surface and a secure Axis Lock. The pocket clip is easy to reposition to the other side of the handle, especially useful for left-handers.
321,77 €

Sold out