Filtrer
Prix
€ €
Fabricants
Longueur des cordes, mm
Taille
Sex
Pays
Acier
Poignée
Série
Dureté
Etui
Verrouillage
Matériel
Filtrer
Japanese kitchen knife Ittetsu Usuba Shirogami 2 IJF-15141 18cm
Couteau de cuisine Ittetsu Usuba Shirogami 2 18cm IJF-15141
Couteau Usuba avec lame forgée soudée de 180 mm en acier carbone Shirogami n° 2. Poids : 400 g. L'usuba est un couteau japonais traditionnel pour trancher les légumes. Contrairement au nakiri, l'usuba est un couteau à simple biseau. Son manche ovale est en bois de magnolia. L'acier carbone est sensible à la rouille et doit être maintenu sec et propre en permanence pour éviter l'oxydation et la décoloration. Lavage à la main à l'eau tiède et séchage à l'aide d'une serviette. Les couteaux Ittetsu sont fabriqués à la main à Echizen, au Japon.
157,26 €

En stock

Japanese kitchen knife Yanagiba Ittetsu Forge-welded Shirogami 2 IJF-15122 18cm
Yanagiba Couteau de cuisine Ittetsu Forge-welded Shirogami 2 18cm IJF-15122
 This Yanagiba knife by Ittetsu has 180 mm forge-welded blade made of Shirogami #2 carbon steel. Weight is 310 g. The oval shaped handle is made of magnolia wood.  Yanagiba knives are primarily used to slice boneless fish fillets for Sashimi and Sushi dishes. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
125,00 €

En stock

Japanese kitchen knife Deba Ittetsu Forge-welded Shirogami 2 for left-handed IJF-15108L 18cm
Deba Couteau de cuisine Ittetsu Forge-welded Shirogami 2 for left-handed 18cm IJF-15108L
 This Deba knife is made for left-handed. Knife has 180 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood.  Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
195,22 €

En stock

Deba Japanese kitchen knife Ittetsu Forge-welded Shirogami 2 for left-handed IJF-11108L 18cm
Deba Couteau de cuisine Ittetsu Forge-welded Shirogami 2 for left-handed 18cm IJF-11108L
 Ittetsu Deba knife IJF-11108L with 180 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. The blade is single bevel and this model is made for left-handed. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
161,29 €

En stock

Kitchen knife set Opinel Les Forgés 1890 Trio 002292
Le set de couteaux Opinel Les Forgés 1890 Trio 002292
The kitchen knife set Opinel Trio 002292 from the Les Forgés 1890 collection consists of a chef's knife, a carving knife and a utility knife. Full forged, these three exceptional knives are a must-have in your kitchen. The handle is in beechwood from sustainably managed forests and it is no varnished. It is stabilized to improve water resistance. Its ergonomic design is an homage to the traditional pocket knife and provides outstanding grip comfort. The blade is made of X50CrMoV15 stainless steel is highly anti-corrosive and ensure a perfect cut.
Blade length:

chef's knife 20cm
carving knife 8cm
utility knife 16cm
273,39 €

En stock

Fillet knife Opinel Les Forgés 1890 002289 18cm
Couteau de cuisine Opinel Les Forgés 1890 18cm 002289
The Fillet knife Opinel Les Forgés 1890 002289 has a fine, flexible, pointed blade. For filleting fish and cutting thin slices. The handle is in beechwood from sustainably managed forests and it is no varnished. It is stabilized to improve water resistance. Its ergonomic design is an homage to the traditional pocket knife and provides outstanding grip comfort. The blade is made of X50CrMoV15 stainless steel is highly anti-corrosive and ensure a perfect cut.
112,10 €

En stock

Deba Japanese kitchen knife Ittetsu Forge-welded Shirogami 2 IJF-15108 18cm
Deba Couteau de cuisine Ittetsu Forge-welded Shirogami 2 18cm IJF-15108
 This Deba knife by Ittetsu has 180 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood.  Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
136,29 €

En stock

Gyuto Japanese kitchen knife Yoshimi Kato Aogami super D-504 18cm
Gyuto Couteau de cuisine Yoshimi Kato Aogami super 18cm D-504
Le couteau de chef japonais Gyuto est forgé à la main par Yoshimi Kato, artisan traditionnel certifié de Takefu, dans la préfecture de Fukui, au Japon. La lame est composée de trois couches d'acier carbone Aogami. Longueur de la lame : 180 mm. Manche en cerisier. Laver à la main à l'eau tiède et sécher avec une serviette. Éviter les os, les aliments congelés, les noix et les bonbons durs.
205,65 €

En stock

Utility kitchen knife Due Cigni Coquus Santoku 2C 2103 SO 18cm
Couteau de cuisine Due Cigni Coquus Santoku 18cm 2C 2103 SO
 Due Cigni Coquus Santoku is suitable for almost all cutting tasks. The Coquus series is inspired by the Maniago line (designed by the founder Oreste Frati) and combines the tradition of the region with craftsmanship and high-quality materials. The blade is made of X50CrMOV15 stainless steel. The handle is made of ergonomically shaped smoked oak.
104,03 €

En stock

Santoku Japanese kitchen knife Tsutomu Kajiwara TK-1116 18cm
Santoku Couteau de cuisine Tsutomu Kajiwara 18cm TK-1116
 Japanese santoku knife handmade by Tsutomu Kajiwara.  Blade 180 mm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
176,61 €

En stock

Santoku Japanese kitchen knife Miyabi 6000MCT Artisan Rocking 34088-181-0 18cm
Santoku Couteau de cuisine Miyabi 6000MCT Artisan Rocking 18cm 34088-181-0
High quality Japanese kitchen knife Santoku Miyabi 6000MCT Artisan Rocking 34088-181-0 is ideal for cutting meat, fish and vegetables. The blade is manufactured from MicroCarbide powder steel embedded between two additional steel layers. The central section achieves a hardness rating of around 63 Rockwell. The knife also undergoes special hardening procedures such as ice hardening at -196 degrees Celsius. This increases the blade's stability, flexibility, durability and robustness to provide you with a practical and sharp knife to effortlessly carry out a multitude of kitchen tasks. The handle is made of premium, smooth-grained cocobolo pakka wood. A mosaic pin gives it a special design feature. The handle will retain its shape and has easy care properties. The knife is finely balanced to make cutting an effortless and pleasurable task. The knife is part of the MIYABI 6000MCT series and has a blade with a hammered finish and a Tsuchime look. The double-edged blade and Honbazuke honing give the knife its sharpness. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.
225,00 €

Expédition après 10-20 jours ouvrables

Nakiri Japanese kitchen knife Tsutomu Kajiwara TK-1118BGA 18cm
Nakiri Couteau de cuisine Tsutomu Kajiwara 18cm TK-1118BGA
Nakiri knife handmade by Tsutomu Kajiwara. Blade 180 mm is made of Aogami 2 steel with iron damascus clad. Traditional handle is made of bocote wood with God’s ash ferrule. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
200,81 €

En stock

Nakiri Japanese kitchen knife Ittetsu Shirogami Tall 75 mm IW-11840Z 18cm
Nakiri Couteau de cuisine Ittetsu Shirogami Tall 75 mm 18cm IW-11840Z
The Ittetsu Tall Nakiri knife W-11840Z with 180 mm blade. Tall nakiris are longer and taller than a normal nakiri knife. This one is 75 mm tall. This nakiri is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal Keyaki (Zelkova). Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
137,10 €

En stock

Yanagiba Japanese kitchen knife Ittetsu Shirogami 2 IJF-11122 18cm
Yanagiba Couteau de cuisine Ittetsu Forge-welded Shirogami 2 18cm IJF-11122
The japanese knife Ittetsu Yanagiba IJF-11122 with 180 mm blade. Forge-welded blade is made of Shirogami #2 carbon steel. Handle is made from magnolia and has good water resistance. This knife has a bevel on only one side of the blade, to help achieve even slices. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. Ittetsu knives are handmade in Echizen city, Japan.
96,77 €

En stock

Deba Japanese kitchen knife Ittetsu Shirogami 2 IJF-11108 18cm
Deba Couteau de cuisine Ittetsu Forge-welded Shirogami 2 18cm IJF-11108
The japanese kitchen knife Ittetsu Deba IJF-11108 with 180 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
112,90 €

En stock

Couteau Japonais Ittetsu Uraoshi Usuba Stamped IJS-11141 18cm
Couteau de cuisine Ittetsu Uraoshi Usuba Stamped 18cm IJS-11141
Le couteau de cuisine japonais Ittetsu Uraoshi Usuba est conçu pour couper et râper les légumes. Le couteau a une longueur de lame de 180 mm. Le manche ovale est en bois de magnolia. La lame est en acier au carbone Shirogami #2. L'acier au carbone est sujet à l'oxydation, le couteau doit donc être conservé au sec et propre. Seul le lavage des mains à l'eau tiède est autorisé, avec essuyage obligatoire. Les couteaux Ittetsu sont fabriqués à la main dans la ville d'Echizen, préfecture de Fukui, au Japon.
96,77 €

En stock

Santoku Couteau Japonais Mcusta Zanmai Ultimate Unkai ZUU-1103D 18cm
Santoku Couteau de cuisine Mcusta Zanmai Ultimate Unkai 18cm ZUU-1103D
Mcusta Zanmai Ultimate Unkai Santoku knife with 18 cm blade. Santoku means 'Three Virtues' or 'To solve Three Problems'. The virtues or problems are slicing, dicing and mincing. The blade of Mcusta Zanmai Ultimate Unkai santoku knife is made of Damascus steel (VG-10 core), 33 layers. The handle is made of pakka wood with mosaic pin. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
290,32 €

En stock

Santoku Japanese kitchen knife Takeshi Saji Iron Wood HG-3104 18cm - 1
Santoku Couteau de cuisine Takeshi Saji Iron Wood 18cm HG-3104
Handmade Japanese santoku knife by Mr. Takeshi Saji. Blade 3 Layer Aogami Super steel with black hammered finish. Blade length 18 cm. Handle - iron wood with stainless steel bolster. Weight of santoku knife HG-3104 by Takeshi Saji is about 200 g.Takeshi Saji is a Chairman of Saji Balacksmith (Japan). Member of Japan Knife Guild and Japan Custom Knife Makers. In 1992, he was officially certified as Dentoukougeishi, a “Traditional Master Craftsman” by the Japanese “Ministry of International Trade & Industry”.
306,45 €

En stock

Santoku Couteau Japonais Miyabi 34404-181-0 18cm
Santoku Couteau de cuisine Miyabi 18cm 34404-181-0
Zwilling Miyabi 5000MCD 67 Japanese santoku 18 cm has an extremely hard MicroCarbide powder steel MC66 core for excellent cutting edge retention and sharpness. Santoku is the best-selling Japanese blade shape and the name translates as "Three Virtues", these being meat, fish and vegetables. The flat cutting edge lends itself to a chopping motion rather than the rocking cutting movement of European chef's knives.The blade core is surrounded by 132 outer layers of steel which make up the unique Damascus-design pattern on the blade. The black Ash wood handle sits comfortably in the hand, allowing firm control and tireless working.It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Rockwell hardness of approximately 66. Zwilling Miyabi 5000MCD 67 Japanese santoku knife made in Japan.
362,10 €

En stock

Nakiri Couteau Japonais Ittetsu Shirogami Tall 75 mm IW-11840 18cm
Nakiri Couteau de cuisine Ittetsu Shirogami Tall 75 mm 18cm IW-11840
Tall Nakiri knife Ittetsu with 180 mm blade. Tall nakiris are longer and taller than a normal nakiri knife. This one is 75 mm tall. This nakiri is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
152,42 €

En stock

Petty Couteau Japonais Ittetsu Shirogami IW-11824 18cm
Petty Couteau de cuisine Ittetsu Shirogami 18cm IW-11824
Petty knife Ittetsu with 180 mm blade. This japanese kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
96,77 €

En stock

Gyuto Couteau Japonais Ittetsu Shirogami IW1187 18cm
Gyuto Couteau de cuisine Ittetsu Shirogami 18cm IW1187
Japanese chef knife gyuto Ittetsu with 18 cm blade. Blade is made of Shirogami Iron Clad steel. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. The Gyuto is the Japanese equivalent to a standard western style chef's knife and is an essential for the professional cook/chef.
123,39 €

En stock

Gyuto Couteau Japonais Tsutomu Kajiwara TK-1122 18cm
Gyuto Couteau de cuisine Tsutomu Kajiwara 18cm TK-1122
Chef knife gyuto handmade by Tsutomu Kajiwara. Blade 180 mm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
149,19 €

En stock

Couteau Japonais Ittetsu Garasuki Shirogami IW11838 18cm
Couteau de cuisine Ittetsu Garasuki Shirogami 18cm IW11838
Garasuki knife Ittetsu with 180 mm blade. This garasuki is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Garasuki knife is designed for fillet chicken from bones, and fillet fish or pork or beef to remove meat from bones. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
125,00 €

En stock