Filtrer
Prix
€ €
Fabricants
Longueur des cordes, mm
Taille
Sex
Pays
Acier
Poignée
Série
Dureté
Etui
Verrouillage
Matériel
Filtrer
Japanese kitchen knife Gyuto Ittetsu VG-10 Damascus IWZ-105 24cm
Gyuto Couteau de cuisine Ittetsu VG-10 Damascus 24cm IWZ-105
Le Gyuto IWZ-105 d'Ittetsu est un couteau de chef de conception japonaise doté d'une lame de 24 cm, conçu pour hacher et trancher la viande, le poisson, les fruits et les légumes. Son manche octogonal est en bois de pakka. La lame est en acier Damas VG10 de haute qualité, finition martelée. Ce couteau ne passe pas au lave-vaisselle. Lavez-le à la main à l'eau tiède et essuyez-le avec une serviette. Les couteaux de cuisine japonais ont une lame très dure mais fine. Ils ne doivent pas couper les os, la viande avec os, les noix de coco et autres noix, ni les aliments durs. Les couteaux Ittetsu, fabriqués à la main, peuvent légèrement différer de ceux présentés sur les photos et de leurs dimensions. Ville d'Echizen, Japon. Poids : 270 g.
142,63 €

En stock

Nakiri Japanese kitchen knife Yoshimi Kato VG-10 Nickel Damascus D613 16.5cm - 1
Nakiri Couteau de cuisine Yoshimi Kato VG-10 Nickel Damascus 16.5cm D-613
Couteau nakiri japonais forgé à la main par Yoshimi Kato, artisan traditionnel certifié à Takefu, préfecture de Fukui au Japon. Lame VG - 10 Nickel Damas. Longueur de la lame 165 mm. Manche-pakkawood rouge. Nakiri est un couteau à légumes. N'essayez pas de couper, de frapper ou de hacher des produits congelés ou des os. La lame peut s'écailler ou se casser. Laver à la main à l'eau tiède et sécher avec une serviette.
225,80 €

En stock

Kiritsuke Japanese kitchen knife Miyabi 6000MCT Artisan 34079-241-0 24cm
Kiritsuke Couteau de cuisine Miyabi 6000MCT Artisan 24cm 34079-241-0
The high quality Kiritsuke Miyabi 6000MCT Artisan 34079-241-0 has an outstanding design and is extremely comfortable. The knife is finely balanced to make cutting an effortless and pleasurable task. The knife is part of the MIYABI 6000MCT series and has a blade with a hammered finish and a Tsuchime look. The blade is manufactured from MicroCarbide powder steel embedded between two additional steel layers. The central section achieves a hardness rating of around 63 Rockwell. The knife also undergoes special hardening procedures such as ice hardening at -196 degrees Celsius. This increases the blade's stability, flexibility, durability and robustness to provide you with a practical and sharp knife to effortlessly carry out a multitude of kitchen tasks. The handle is made of premium, smooth-grained cocobolo pakka wood. A mosaic pin gives it a special design feature. The handle will retain its shape and has easy care properties. 
It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.
289,52 €

Expédition après 10-20 jours ouvrables

Santoku Japanese kitchen knife Miyabi 6000MCT Artisan Rocking 34088-181-0 18cm
Santoku Couteau de cuisine Miyabi 6000MCT Artisan Rocking 18cm 34088-181-0
High quality Japanese kitchen knife Santoku Miyabi 6000MCT Artisan Rocking 34088-181-0 is ideal for cutting meat, fish and vegetables. The blade is manufactured from MicroCarbide powder steel embedded between two additional steel layers. The central section achieves a hardness rating of around 63 Rockwell. The knife also undergoes special hardening procedures such as ice hardening at -196 degrees Celsius. This increases the blade's stability, flexibility, durability and robustness to provide you with a practical and sharp knife to effortlessly carry out a multitude of kitchen tasks. The handle is made of premium, smooth-grained cocobolo pakka wood. A mosaic pin gives it a special design feature. The handle will retain its shape and has easy care properties. The knife is finely balanced to make cutting an effortless and pleasurable task. The knife is part of the MIYABI 6000MCT series and has a blade with a hammered finish and a Tsuchime look. The double-edged blade and Honbazuke honing give the knife its sharpness. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.
225,00 €

Expédition après 10-20 jours ouvrables

Santoku Japanese kitchen knife Miyabi 6000MCT Artisan 34074-141-0 14cm
Santoku Couteau de cuisine Miyabi 6000MCT Artisan 14cm 34074-141-0
Santoku kitchen knife Miyabi 6000MCT Artisan 34074-141-0 is traditionally valued in Japan for its many uses, since you can use it for meat and fish as well as for vegetables. The handle is made of premium, smooth-grained cocobolo pakka wood. A mosaic pin gives it a special design feature. The handle will retain its shape and has easy care properties. The knife is finely balanced to make cutting an effortless and pleasurable task. The knife is part of the MIYABI 6000MCT series and has a blade with a hammered finish and a Tsuchime look. The double-edged blade and Honbazuke honing give the knife its sharpness. The authentic Japanese blade profile ensures is easy to use and will stay sharp. The blade is manufactured from MicroCarbide powder steel embedded between two additional steel layers. The central section achieves a hardness rating of around 63 Rockwell. The knife also undergoes special hardening procedures such as ice hardening at -196 degrees Celsius. This increases the blade's stability, flexibility, durability and robustness to provide you with a practical and sharp knife to effortlessly carry out a multitude of kitchen tasks.
It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.
176,61 €

Expédition après 10-20 jours ouvrables

Paring Vegetable knife Miyabi 6000MCT Artisan Shotoh 34075-141-0 14cm
Paring Couteau de cuisine Miyabi 6000MCT Artisan Shotoh 14cm 34075-141-0
Paring Vegetable knife Zwilling  Miyabi 6000MCT Artisan Shotoh 34075-141-0 is designed for the slicing, cutting and peeling of fruit, vegetables, meat. The knife is part of the MIYABI 6000MCT series and has a blade with a hammered finish and a Tsuchime look. The handle is made of premium, smooth-grained cocobolo pakka wood. A mosaic pin gives it a special design feature.
The handle will retain its shape and has easy care properties. The knife is finely balanced to make cutting an effortless and pleasurable task. The double-edged blade and Honbazuke honing give the knife its sharpness. The authentic Japanese blade profile ensures the 14 cm long shotoh is easy to use and will stay sharp. The blade is manufactured from MicroCarbide powder steel embedded between two additional steel layers. The central section achieves a hardness rating of around 63 Rockwell. The knife also undergoes special hardening procedures such as ice hardening at -196 degrees Celsius. This increases the blade's stability, flexibility, durability and robustness to provide you with a practical and sharp knife to effortlessly carry out a multitude of kitchen tasks. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.
176,61 €

Expédition après 10-20 jours ouvrables

Couteau dépouillement United Cutlery Hibben Legacy Skinner GH5105 8.9cm
-18,00 €
Couteau à lame fix United Cutlery Hibben Legacy Skinner 8.9cm GH5105
Skinning knife United Cutlery Hibben Legacy Skinner is 8" overall. Knife has 3.5" satin finish 5Cr15MoV stainless skinner blade and black pakkawood handle. Full tang with finger ring. Lanyard hole. Hibben Legacy Skinner knife comes with black leather belt sheath. 
40,06 €
58,06 €

En stock

Santoku Couteau Japonais Mcusta Zanmai Ultimate Unkai ZUU-1103D 18cm
Santoku Couteau de cuisine Mcusta Zanmai Ultimate Unkai 18cm ZUU-1103D
Mcusta Zanmai Ultimate Unkai Santoku knife with 18 cm blade. Santoku means 'Three Virtues' or 'To solve Three Problems'. The virtues or problems are slicing, dicing and mincing. The blade of Mcusta Zanmai Ultimate Unkai santoku knife is made of Damascus steel (VG-10 core), 33 layers. The handle is made of pakka wood with mosaic pin. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
290,32 €

En stock

Gyuto Couteau Japonais Ittetsu Black Pakka wood IWY-9006 24cm
Gyuto Couteau de cuisine Ittetsu Black Pakka wood 24cm IWY-9006
Chef knife from Ittetsu with 24 cm blade. The blade is made of stainless Sandvik 19C27 steel. Handle is black pakka wood.  Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. 
129,03 €

En stock

Sujihiki Couteau Japonais Ittetsu Black Pakka wood IWY-9008 27cm
Sujihiki Couteau de cuisine Ittetsu Black Pakka wood 27cm IWY-9008
Sujihiki slicing knife from Ittetsu with 27 cm blade. The blade is made of stainless Sandvik 19C27 steel. Handle is black pakka wood. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. 
129,03 €

En stock

Couteau de Chef Böker Damascus Black Small 130419DAM 15.7cm
Couteau de cuisine Böker Damascus Black Small 15.7cm 130419DAM
Boker Damascus Black chef´s knife combines traditionally Japanese handle made of black pakka wood with razor-sharp blade made of stainless Damascus with 37 layers of steel, characterized by a beautiful grain. The extremely high-impact core of the Damascus blade consists of the high-performance VG-10 steel. The Japanese design of the knife handle with the matted stainless steel clamps gives the line its special character. The secret of this unusual sharpness lies in the material and its processing. The blade consists of 37 layers of Damascus steel. The stainless premium blade steel VG-10 used for the center layer is made in Japan and offers hardness, resilience and a homogeneous crystalline structure. 
Please only hand wash the knives, do not place in dishwasher. Total 26,4 cm. Blade 15,7 cm. Thickness 2,5 mm. Weight 70 g. Comes with gift box.
128,23 €

Expédition après 10-20 jours ouvrables

Nakiri Japanese kitchen knife Miyabi 5000FCD 34685-171-0 17cm - 1
Nakiri Couteau de cuisine Miyabi 5000FCD RAW 17cm 34685-171-0
Zwilling Miyabi 5000FCD Nakiri 17 cm Japanese vegetable knife. Nakiri has a hard fine carbide steel core which gives very good cutting edge retention and sharpness. The FC61 steel core of the blade is embedded in 48 outer layers of Damascus-design steel, giving each knife its unique pattern. The cutting edge is symmetrical (not single bevel) so it’s suitable for both right and left-handed use. The edge is Honbazuke-honed – a three-stage grinding, sharpening and polishing process resulting in razor-like sharpness. There is no finger guard so the whole length of the cutting edge can be used. The pakka wood handle seamlessly joins the half-bolster. The smooth join helps to prevent calluses forming on the thumb and forefinger. For best care, it’s recommended to hand wash only. Maintain and sharpen on a whetstone, and using glass, ceramic or stone cutting boards should be avoided as this can prematurely dull the cutting edge. Zwilling Miyabi 5000FCD Nakiri vegetable knife made in Japan.
200,81 €

Expédition après 10-20 jours ouvrables

Nakiri Couteau Japonais Ittetsu Black Pakka wood IWY-9003 16cm
Nakiri Couteau de cuisine Ittetsu Black Pakka wood 16cm IWY-9003
Nakiri vegetable knife from Ittetsu with 16 cm blade. Nakiri is designed for finely slicing and shredding herbs and vegetables, and thanks to the wide rectangular blade, the pieces are easy to transfer to a plate or pan. The straight cutting edge is used for cutting in a vertical line and allows many different cutting techniques such as julienne or chiffonade. The blade is made of stainless Sandvik 19C27 steel. Handle is black pakka wood. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. 
72,58 €

En stock

Utility kitchen knife Miyabi 6000MCT Gyutoh 34073-201-0 20cm - 1
Gyuto Couteau de cuisine Miyabi 6000MCT Artisan Gyutoh 20cm 34073-201-0
Measuring 20 cm in length, the GYUTOH knife is suitable for cutting and separating fish and meat. Its pointed tip and sturdy blade enable clean cuts to be made. The handle’s flat finishing ensures safety by preventing your hand from slipping from the handle onto the blade. Miyabi also uses a Japanese blade profile, meaning that the GYUTOH combines high-cutting quality properties with comfort.
The blade is made of a micro-carbide powder steel core wrapped in two additional layers of steel. The blade is hammer-forged, giving it an appearance slightly reminiscent of the Tschumine design. In addition, each blade of the MIYABI 600MCT series is put through different ice-hardening processes which must be completed at -196°C, so that a final hardness of around 63 Rockwell is achieved.
The blade is polished on both sides and finished by hand using Honbazuke honing. The handle on the other hand is made out of pakka wood, which has a subtle pattern and stands out thanks to its sturdiness and flexibility. The perfect balance enables a high level of comfort and lets you work without tiring, thus making the knife from Miyabi a useful cutting utensil in your kitchen.
- Blade core made of MicroCarbide MC63 powder steel embedded in 2 layers of steel. This provides a hardness of approx. 63 Rockwell. (International standard unit of measurement for hardness); - CRYODUR® ice-hardened blades provide particularly good cutting edge retention, corrosion resistance and optimum blade flexibility. - Authentic Japanese blade profile with Tsuchime look (hammered finish). - The symmetrical blade with ultra-sharp Honbazuke edge ensures incredible sharpness. - Dimensionally-stable pakka wood handle for perfect balance, outstanding comfort and fatigue-free cutting with all cutting techniques; sophisticated dark wood look.
237,90 €

Expédition après 10-20 jours ouvrables

Sujihiki Couteau Japonais Seki Kanetsugu Pro J 6009 21cm
Sujihiki Couteau de cuisine Seki Kanetsugu Pro J 21cm 6009
Couteau à trancher japonais Sujihiki avec lame de 21 cm de la série Pro J de Seki Kanetsugu. Le Sujihiki est un couteau à trancher à double tranchant doté d'une lame longue et étroite qui tranche délicatement la viande ou les légumes tout en préservant la fraîcheur de chaque ingrédient. Après des années de recherche pour des couteaux de cuisine ultra-performants, alliant matériaux fonctionnels et design, M. Kawamura de Kanetsugu a lancé la gamme innovante de la série Pro J.
La lame Tsuchime forgée au marteau est dotée d'une construction gainée. Le cœur de la lame est en acier au cobalt spécial de haute qualité, le ZA-18 d'Aichi Steel Company, intercalé avec de l'acier inoxydable AUS-2. Il s'agit du premier couteau de cuisine à utiliser cette nouvelle formule d'acier ZA-18.
M. Kawamura explique qu'Aichi Steel Company a récemment développé ce ZA-18 pour concurrencer, voire surpasser, le VG-10. Il est traité thermiquement puis trempé à froid (trempe à froid) pour atteindre une dureté Rockwell de HRc 60-61. La composition chimique du ZA-18 est similaire à celle du VG-10, mais contient des teneurs plus élevées en carbone (1,20 contre 1,05), chrome (18,0 contre 15,5), molybdène (1,50 contre 1,20) et cobalt (1,80 contre 1,5) pour une dureté, une durabilité et une résistance à la rouille accrues. Avant d'utiliser cet acier pour la série Pro J, M. Kawamura l'a testé à de nombreuses reprises et a démontré son incroyable performance de coupe et son potentiel. La technologie japonaise de fabrication de la lame gainée offre également de nombreux avantages en termes de durabilité et d'entretien, car l'acier extérieur AUS-2 protège l'acier central et confère à la lame une résistance accrue à la flexion et à la rupture malgré les différentes couches d'acier de dureté.
Le manche est en bois de pakka noir, avec une entretoise en microfibre rouge et une mitre en acier inoxydable. Il est conçu de manière ergonomique avec un traversin légèrement incliné soudé dans la soie et une plaque de poignée arrondie à la main pour s'adapter à votre main.
104,03 €

En stock

Chef knife Miyabi 5000FCD Gyutoh 34681-201-0 20cm - 1
Couteau de cuisine Miyabi 5000FCD RAW Gyutoh 20cm 34681-201-0
The gyutoh, or chef’s knife, is a general purpose knife for the preparation of larger cuts of meat and vegetables. It has a fine carbide steel core which gives the knife very good initial sharpness and cutting edge retention. The core is embedded in 48 layers of steel which create each knife’s unique Damascus-design. The symmetrical cutting edge is Honbazuke honed. This three-stage grinding, sharpening and polishing process gives the knife razor-like sharpness. The entire length of the edge can be used to cut as there is no finger guard. The join between handle and bolster is completely smooth, which helps to prevent calluses forming on the thumb and forefinger and gives a comfortable grip. Hand wash only for best care and avoid cutting on glass, ceramic or stone boards as these will prematurely dull the edge. Maintain and sharpen using whetstones. - FC61 fine carbide steel blade core; - 48 layers of steel surrounding the core create the Damascus-design; - FRIODUR ice-hardened for extreme hardness; - Rockwell hardness of approximately 61; - Symmetrical cutting edge; - Pakka wood handle; - Steel mosaic pin and handle end cap; - Made in Japan.
200,81 €

Expédition après 10-20 jours ouvrables

Paring Vegetable knife Miyabi 5000FCD Shotoh 34680-091-0 9cm - 1
Paring Couteau de cuisine Miyabi 5000FCD RAW Shotoh 9cm 34680-091-0
Zwilling Miyabi 5000FCD Shotoh paring knife 9 cm is ideal for cutting, cleaning and peeling fruit and vegetables. Shotoh has a hard fine carbide steel core which gives very good cutting edge retention and sharpness. The FC61 steel core of the blade is embedded in 48 outer layers of Damascus-design steel, giving each knife its unique pattern. The cutting edge is symmetrical (not single bevel) so it’s suitable for both right and left-handed use. The edge is Honbazuke-honed – a three-stage grinding, sharpening and polishing process resulting in razor-like sharpness. There is no finger guard so the whole length of the cutting edge can be used. The pakka wood handle seamlessly joins the half-bolster. The smooth join helps to prevent calluses forming on the thumb and forefinger. For best care, it’s recommended to hand wash only. Maintain and sharpen on a whetstone, and using glass, ceramic or stone cutting boards should be avoided as this can prematurely dull the cutting edge. Zwilling Miyabi 5000FCD shotoh paring knife made in Japan.
120,16 €

Expédition après 10-20 jours ouvrables

Gyuto Japanese kitchen knife Seki Kanetsugu Pro-M 7007 27cm - 1
Gyuto Couteau de cuisine Seki Kanetsugu 27cm 7007
The blade is made of Molybdenum alloy high carbon stainless steel with traditional"Hamaguri ba" (Convex edge grind), the edge that made Japanese swords famous, for an outstanding sharpness and durability,and yet easy to resharpen. It is heat treated and then Sub Zero quenched. which refrigerates the blade to 70 degrees for longer edge retention and strength to brittleness and chipping.pro m handle1.jpg Since introducing the Kanetsugu Pro M series two years ago, Seki Kanetsugu has received a positive reputation for their unique Round Shape of Black Pakka wood handle for comfortable grip, well balanced and practical shape. You might have not been familiar with this shape of the handle and the blade edge (Convex edge). Mr. Kawamura (President of Kanetsugu company) has spent numerous times to research and study to produce the best performance chef knives. Recomeneded for both - Home Chefs to Pro Chefs who demand extra sharpness and cutting performance for the sophisticated cooking life.
80,24 €

En stock

Folding knife Mcusta Higonokami MC-0192C 8.3cm - 1
Couteau pliant Mcusta Higonokami 8.5cm MC-0192C
Mcusta's first higonokami design friction folder is really a spectacular knife! It features the traditional Japanese one hand opening and closing mechanism. It is not a locking blade, but the pressure of the thumb on the blade back prevents it from closing in use. It also has a firm ball bearing detent, keeping the blade in place whether open or closed - similar to how a linerlock keeps a blade closed. Blade lenght is 83 mm. Mcusta Friction Folder Higonokami goes with Nishijin pouch. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
145,16 €

En stock

Hunting and Outdoor knife United Cutlery Hibben Legacy Boot GH5059 15.6cm
-9,00 €
Couteau à lame fix United Cutlery Hibben Legacy Boot 15.6cm GH5059
Le couteau fixe Hibben Legacy Boot mesure 30,5 cm (12 pouces) au total. Il est doté d'une lame de 15,5 cm (6,13 pouces) à double tranchant en acier inoxydable 7Cr17MoV, avec une finition miroir, et d'un manche en pakka noir poli. Lame pleine soie allongée. Brise-vitre. Trou pour dragonne. Le couteau Hibben Legacy Boot est livré avec un étui ceinture en cuir noir.
62,60 €
71,60 €

En stock

Couteau pliant Fox Knives Forest Pakkawood 575PW 7.5cm
Couteau pliant Fox Knives Forest Pakkawood 7.5cm 575PW
Fox Knives Forest Pakkawood 575PW stylish folder for every day use. Forest has a 430 stainless steel bolsters and pakka wood scales with lanyard hole, back lock. The 2.95" blade made of N690Co stainless steel. Forest 575PW folding knife weighs 120 g. Comes with nylon sheath.
79,84 €

En stock

Santoku Japanese kitchen knife Miyabi 4000FC 33957-181-0 18cm - 1
Santoku Couteau de cuisine Miyabi 4000FC 18cm 33957-181-0
MIYABI 4000FC santoku, or Japanese chef’s knife, with an 18cm blade. Experience the beauty of sharpness with the MIYABI 4000FC series. The blade is made from a single layer of FC61 steel, a proven material in terms of hardness (HRC 61) and durability. - Fine carbide 61 steel blade construction for a sharp, hard blade; - Rockwell hardness of 61 for durability and cutting edge retention; - Katana style cutting edge for excellent sharpness; - FRIODUR® ice-hardened blade for toughness, elasticity and corrosion resistance; - Engraved MIYABI logo on the blade; - Octagonal pakka wood handle for comfortable grip with mosaic pin. - Made in Japan
153,22 €

Expédition après 10-20 jours ouvrables

Bread knife Miyabi 5000FCD 34686-241-0 24cm - 1
Couteau de cuisine Miyabi 5000FCD RAW 24cm 34686-241-0
Zwilling Miyabi 5000FCD Bread knife 24 cm. It has a hard fine carbide steel core which gives very good cutting edge retention and sharpness. The FC61 steel core of the blade is embedded in 48 outer layers of Damascus-design steel, giving each knife its unique pattern. The cutting edge is symmetrical (not single bevel) so it’s suitable for both right and left-handed use. The edge is Honbazuke-honed – a three-stage grinding, sharpening and polishing process resulting in razor-like sharpness. There is no finger guard so the whole length of the cutting edge can be used. The pakka wood handle seamlessly joins the half-bolster. The smooth join helps to prevent calluses forming on the thumb and forefinger. For best care, it’s recommended to hand wash only. Maintain and sharpen on a whetstone, and using glass, ceramic or stone cutting boards should be avoided as this can prematurely dull the cutting edge. Zwilling Miyabi 5000FCD Bread knife made in Japan.
200,81 €

Expédition après 10-20 jours ouvrables

Gyuto Japanese kitchen knife Miyabi 5000FCD 34681-241-0 24cm - 1
Gyuto Couteau de cuisine Miyabi 5000FCD RAW 24cm 34681-241-0
Zwilling Miyabi 5000FCD Gyutoh chef's knife 24 cm is perfectly balanced, contains a unique Damascus design and an incomparable edge. With a blade length of 24 cm, it is ideal for cutting meat and large vegetables, the Japanese equivalent of the European chef's knife. Gyutoh knife has a hard fine carbide steel core which gives very good cutting edge retention and sharpness. The FC61 steel core of the blade is embedded in 48 outer layers of Damascus-design steel, giving each knife its unique pattern. The cutting edge is symmetrical (not single bevel) so it’s suitable for both right and left-handed use. The edge is Honbazuke-honed – a three-stage grinding, sharpening and polishing process resulting in razor-like sharpness. There is no finger guard so the whole length of the cutting edge can be used. The pakka wood handle seamlessly joins the half-bolster. The smooth join helps to prevent calluses forming on the thumb and forefinger. For best care, it’s recommended to hand wash only. Maintain and sharpen on a whetstone, and using glass, ceramic or stone cutting boards should be avoided as this can prematurely dull the cutting edge. Zwilling Miyabi 5000FCD Gyutoh chef's knife made in Japan.
225,00 €

Expédition après 10-20 jours ouvrables