Filtrer
Prix
136 € 371 €
Fabricants
Blade Length, mm
90 240
Taille
Sex
Country
Steel
Handle
Collection
Hardness
Sheath
Lock
Filtrer
Filtres:
Effacer les filtres
Steel : MC63 powder steel
Gyuto Japanese kitchen knife Miyabi 5000MCT 32911-161-0 16cm
-15%
Gyuto Couteau de cuisine Miyabi 5000MCT 16cm 32911-161-0
Gyuto Japanese kitchen knife Miyabi 5000MCT 32911-161-0 is designed for chopping, mincing and slicing meat, fish, vegetables and fruit. The ergonomic handle is made of micarta. This series MIZU 5000MCT has a core of MC 63, microcarbide powder steel (63 HRC) covered with 2 layers of ice- hardened Cryodur stainless steel. Cutting edge has an angle of 19°. Hammered finish (Tsuchime) which prevents food from sticking to the blade. Preparing cold platters or delicious curries containing lots of vegetables are easy with this knife. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Made in Seki, Japan. 
170,69 €
200,81 €

Expédition après 10-20 jours ouvrables

Kiritsuke Japanese kitchen knife Miyabi 6000MCT Artisan 34079-241-0 24cm
-15%
Kiritsuke Couteau de cuisine Miyabi 6000MCT Artisan 24cm 34079-241-0
The high quality Kiritsuke Miyabi 6000MCT Artisan 34079-241-0 has an outstanding design and is extremely comfortable. The knife is finely balanced to make cutting an effortless and pleasurable task. The knife is part of the MIYABI 6000MCT series and has a blade with a hammered finish and a Tsuchime look. The blade is manufactured from MicroCarbide powder steel embedded between two additional steel layers. The central section achieves a hardness rating of around 63 Rockwell. The knife also undergoes special hardening procedures such as ice hardening at -196 degrees Celsius. This increases the blade's stability, flexibility, durability and robustness to provide you with a practical and sharp knife to effortlessly carry out a multitude of kitchen tasks. The handle is made of premium, smooth-grained cocobolo pakka wood. A mosaic pin gives it a special design feature. The handle will retain its shape and has easy care properties. 
It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.
246,09 €
289,52 €

Expédition après 10-20 jours ouvrables

Santoku Japanese kitchen knife Miyabi 6000MCT Artisan Rocking 34088-181-0 18cm
-15%
Santoku Couteau de cuisine Miyabi 6000MCT Artisan Rocking 18cm 34088-181-0
High quality Japanese kitchen knife Santoku Miyabi 6000MCT Artisan Rocking 34088-181-0 is ideal for cutting meat, fish and vegetables. The blade is manufactured from MicroCarbide powder steel embedded between two additional steel layers. The central section achieves a hardness rating of around 63 Rockwell. The knife also undergoes special hardening procedures such as ice hardening at -196 degrees Celsius. This increases the blade's stability, flexibility, durability and robustness to provide you with a practical and sharp knife to effortlessly carry out a multitude of kitchen tasks. The handle is made of premium, smooth-grained cocobolo pakka wood. A mosaic pin gives it a special design feature. The handle will retain its shape and has easy care properties. The knife is finely balanced to make cutting an effortless and pleasurable task. The knife is part of the MIYABI 6000MCT series and has a blade with a hammered finish and a Tsuchime look. The double-edged blade and Honbazuke honing give the knife its sharpness. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.
191,25 €
225,00 €

Expédition après 10-20 jours ouvrables

Santoku Japanese kitchen knife Miyabi 6000MCT Artisan 34074-141-0 14cm
-15%
Santoku Couteau de cuisine Miyabi 6000MCT Artisan 14cm 34074-141-0
Santoku kitchen knife Miyabi 6000MCT Artisan 34074-141-0 is traditionally valued in Japan for its many uses, since you can use it for meat and fish as well as for vegetables. The handle is made of premium, smooth-grained cocobolo pakka wood. A mosaic pin gives it a special design feature. The handle will retain its shape and has easy care properties. The knife is finely balanced to make cutting an effortless and pleasurable task. The knife is part of the MIYABI 6000MCT series and has a blade with a hammered finish and a Tsuchime look. The double-edged blade and Honbazuke honing give the knife its sharpness. The authentic Japanese blade profile ensures is easy to use and will stay sharp. The blade is manufactured from MicroCarbide powder steel embedded between two additional steel layers. The central section achieves a hardness rating of around 63 Rockwell. The knife also undergoes special hardening procedures such as ice hardening at -196 degrees Celsius. This increases the blade's stability, flexibility, durability and robustness to provide you with a practical and sharp knife to effortlessly carry out a multitude of kitchen tasks.
It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.
150,12 €
176,61 €

Expédition après 10-20 jours ouvrables

Paring Vegetable knife Miyabi 6000MCT Artisan Shotoh 34075-141-0 14cm
Paring Couteau de cuisine Miyabi 6000MCT Artisan Shotoh 14cm 34075-141-0
Paring Vegetable knife Zwilling  Miyabi 6000MCT Artisan Shotoh 34075-141-0 is designed for the slicing, cutting and peeling of fruit, vegetables, meat. The knife is part of the MIYABI 6000MCT series and has a blade with a hammered finish and a Tsuchime look. The handle is made of premium, smooth-grained cocobolo pakka wood. A mosaic pin gives it a special design feature.
The handle will retain its shape and has easy care properties. The knife is finely balanced to make cutting an effortless and pleasurable task. The double-edged blade and Honbazuke honing give the knife its sharpness. The authentic Japanese blade profile ensures the 14 cm long shotoh is easy to use and will stay sharp. The blade is manufactured from MicroCarbide powder steel embedded between two additional steel layers. The central section achieves a hardness rating of around 63 Rockwell. The knife also undergoes special hardening procedures such as ice hardening at -196 degrees Celsius. This increases the blade's stability, flexibility, durability and robustness to provide you with a practical and sharp knife to effortlessly carry out a multitude of kitchen tasks. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.
176,61 €

Expédition après 10-20 jours ouvrables

Gyuto Japanese kitchen knife Miyabi 5000MCD 34373-161-0 16cm
-15%
Gyuto Couteau de cuisine Miyabi 5000MCD 16cm 34373-161-0
Zwilling gyuto Miyabi 5000MCD 34373-161-0 chef's knife is a work of culinary art.  It has an authentic Japanese profile with an extremely sharp Honbazuke honing and is symmetrically polished at an angle of 19 degrees. Its slim yet stable blade delivers a perfectly controlled and clean cut. The blade is first sharpened twice on rotating stones and is then polished on a leather wheel.
The gyutoh's handle is made of Masur birch to give each knife a unique wood-grain pattern. An end cap and subtly styled mosaic pin complete the knife's elegant look. The handle is D-shaped to give the knife perfect balance and control for effortless and precision cutting. The blade has beautiful Damask patterning and a hard core of MicroCarbide MC63 powder steel enclosed within 100 layers of two different steels. The CRYODUR® blade is ice-hardened at -196 degrees Celsius to achieve a hardness rating of around 63 Rockwell that keeps the blade sharp and flexible. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.
Zwilling Miyabi 5000MCD Gyutoh chef's knife made in Japan. There are only best kitchen knives in MyGoodKnife’s range.
266,65 €
313,71 €

Expédition après 10-20 jours ouvrables

Santoku Japanese kitchen knife Miyabi 5000MCD 34374-181-0 18cm - 1
-15%
Santoku Couteau de cuisine Miyabi 5000MCD 18cm 34374-181-0
Zwilling Miyabi 5000MCD Santoku 18 cm. MIYABI knives epitomise the beauty of sharpness. The typical Japanese blade design and the outstanding sharpness of the MIYABI 5000MCD series turn these knives into precision instruments that leave nothing to be desired. They are perfect in function and ergonomics and the design is unique. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Manufactured by ZWILLING J.A. HENCKELS in its own factory in Seki, the traditional heart of the Japanese knife and sword industry, MIYABI knives unite German state-of-the-art technology with the knowledge of the old master craftsmen. It is therefore no coincidence that the unique Katana edge is reminiscent of the legendary Japanese swords. There are only best kitchen knives in MyGoodKnife’s range.
294,07 €
345,97 €

In stock

Utility kitchen knife Miyabi 6000MCT Gyutoh 34073-201-0 20cm - 1
-15%
Gyuto Couteau de cuisine Miyabi 6000MCT Artisan Gyutoh 20cm 34073-201-0
Measuring 20 cm in length, the GYUTOH knife is suitable for cutting and separating fish and meat. Its pointed tip and sturdy blade enable clean cuts to be made. The handle’s flat finishing ensures safety by preventing your hand from slipping from the handle onto the blade. Miyabi also uses a Japanese blade profile, meaning that the GYUTOH combines high-cutting quality properties with comfort.
The blade is made of a micro-carbide powder steel core wrapped in two additional layers of steel. The blade is hammer-forged, giving it an appearance slightly reminiscent of the Tschumine design. In addition, each blade of the MIYABI 600MCT series is put through different ice-hardening processes which must be completed at -196°C, so that a final hardness of around 63 Rockwell is achieved.
The blade is polished on both sides and finished by hand using Honbazuke honing. The handle on the other hand is made out of pakka wood, which has a subtle pattern and stands out thanks to its sturdiness and flexibility. The perfect balance enables a high level of comfort and lets you work without tiring, thus making the knife from Miyabi a useful cutting utensil in your kitchen.
- Blade core made of MicroCarbide MC63 powder steel embedded in 2 layers of steel. This provides a hardness of approx. 63 Rockwell. (International standard unit of measurement for hardness); - CRYODUR® ice-hardened blades provide particularly good cutting edge retention, corrosion resistance and optimum blade flexibility. - Authentic Japanese blade profile with Tsuchime look (hammered finish). - The symmetrical blade with ultra-sharp Honbazuke edge ensures incredible sharpness. - Dimensionally-stable pakka wood handle for perfect balance, outstanding comfort and fatigue-free cutting with all cutting techniques; sophisticated dark wood look.
202,22 €
237,90 €

Expédition après 10-20 jours ouvrables

Paring Couteau à fruits et légumes Miyabi Shotoh MIZU 32910-091-0 9cm
Paring Couteau de cuisine Miyabi Shotoh MIZU 9cm 32910-091-0
The Shotoh from Miyabi is designed for the slicing, cutting and peeling of fruit and vegetables. Preparing cold platters or delicious curries containing lots of vegetables are easy with this knife. This series MIZU 5000MCT has a core of MC 63, microcarbide powder steel (63 HRC) covered with 2 layers of ice- hardened Cryodur stainless steel. Cutting edge has an angle of 19°. Hammered finish (Tsuchime) which prevents food from sticking to the blade and ergonomic handle of micarta. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Made in Seki, Japan. 
184,29 €

In stock

Utility kitchen knife Miyabi 5000MCD Shotoh 34372-131-0 13cm - 1
Couteau de cuisine Miyabi 5000MCD Shotoh 13cm 34372-131-0
Zwilling Miyabi 5000MCD shotoh petty knife 13 cm is ideal for cutting, cleaning and peeling fruit and vegetables. The ultra-sharp Honbazuke honing on the symmetrically honed blade delivers extreme sharpness. This is enhanced by the typically Japanese blade profile, which has a symmetrical cutting edge with an angle of 19 degrees.The shotoh's handle is made of Masur birch to give each knife a unique wood-grain pattern. An end cap and subtly styled mosaic pin complete the knife's elegant look. The handle is D-shaped to give the knife perfect balance and control for effortless and precision cutting. The blade has beautiful Damask patterning and a hard core of MicroCarbide MC63 powder steel enclosed within 100 layers of two different steels. The CRYODUR® blade is ice-hardened at -196 degrees Celsius to achieve a hardness rating of around 63 Rockwell that keeps the blade sharp and flexible. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.Zwilling Miyabi 5000MCD shotoh petty knife made in Japan.
265,32 €

Expédition après 10-20 jours ouvrables

Bread knife Miyabi 6000MCT 34076-231-0 23cm - 1
Couteau de cuisine Miyabi 6000MCT Artisan 23cm 34076-231-0
Zwilling Miyabi 6000MCT Bread knife 23 cm has a tough serrated edge, so it can easily cut through bread crusts and pastries. The double-edged blade and Honbazuke honing give the knife its sharpness.  The knife is part of the MIYABI 6000MCT series and has a blade with a hammered finish and a Tsuchime look. The handle is made of premium, smooth-grained cocobolo pakka wood. A mosaic pin gives it a special design feature. The handle will retain its shape and has easy care properties. The knife is finely balanced to make cutting an effortless and pleasurable task. The blade is manufactured from MicroCarbide powder steel embedded between two additional steel layers. The central section achieves a hardness rating of around 63 Rockwell. The knife also undergoes special hardening procedures such as ice hardening at -196 degrees Celsius. This increases the blade's stability, flexibility, durability and robustness to provide you with a practical and sharp knife to effortlessly carry out a multitude of kitchen tasks. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.
225,00 €

Expédition après 10-20 jours ouvrables

Gyuto Japanese kitchen knife Miyabi 6000MCT 34073-241-0 24cm - 1
-15%
Gyuto Couteau de cuisine Miyabi 6000MCT Artisan 24cm 34073-241-0
Zwilling Miyabi 6000MCT Gyuto 24 cm chef's knife is suitable for cutting and separating fish and meat also vegetables. The double-edged blade and Honbazuke honing give the knife its sharpness. The authentic Japanese blade profile ensures the 24 cm long Gyuto is easy to use and will stay sharp. The knife is part of the MIYABI 6000MCT series and has a blade with a hammered finish and a Tsuchime look. The handle is made of premium, smooth-grained cocobolo pakka wood. A mosaic pin gives it a special design feature. The handle will retain its shape and has easy care properties. The knife is finely balanced to make cutting an effortless and pleasurable task. The blade is manufactured from MicroCarbide powder steel embedded between two additional steel layers. The central section achieves a hardness rating of around 63 Rockwell. The knife also undergoes special hardening procedures such as ice hardening at -196 degrees Celsius. This increases the blade's stability, flexibility, durability and robustness to provide you with a practical and sharp knife to effortlessly carry out a multitude of kitchen tasks. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.
218,67 €
257,26 €

Expédition après 10-20 jours ouvrables

Chef knife Miyabi 5000MCD Chutoh 34372-161-0 16cm - 1
Couteau de cuisine Miyabi 5000MCD Chutoh 16cm 34372-161-0
Zwilling Miyabi 5000MCD Chutoh 16 cm. Each single knife Zwilling Miyabi 5000MCD Chutoh is an authentic master piece setting quality standards: 100 layers of two different steel grades with a different hardness encapsulate the hard core of MicroCarbide powder steel MC63. A special blade treatment changes the surface structure of each layer, thus creating the blade’s individual flower damask pattern. The CRYODUR blades are hardened during a specifically developed process (including ice-hardening at -196°C) that delivers the extreme hardness. The original Japanese Honbazuke honing gives the symmetric blade the scalpel-like sharpness that is the hallmark of all MIYABI knives. The traditional “D-handle” of masur birch ensures perfect balance, optimum control and tireless cutting. There are only best kitchen knives in MyGoodKnife’s range.
273,39 €

Expédition après 10-20 jours ouvrables

Santoku Japanese kitchen knife Miyabi 6000MCT 34074-181-0 18cm - 1
-15%
Santoku Couteau de cuisine Miyabi 6000MCT Artisan 18cm 34074-181-0
The Santoku knife from the house of Miyabi has a sharpness of approximately 63 Rockwell and is suitable for cutting meat, fish and vegetables. The dark wooden handle is comfortable to hold thanks to its ergonomic shape, and allows effortless progress. The blade’s pattern, cutting properties, durability and toughness are impressive. The material used allows fast cleaning in the dishwasher.
The manufacturer has paid attention to an authentic Japanese blade profile, which is decorated with a hammered look. The core of the blade is made of micro carbide, wrapped with two layers of steel. Double-sided grinding and the Honbazuke edge of the blade perfects the sharpness of the 18 cm Miyabi Santoku knife.
The handle is made of tough dark cocobolo pakka wood. A goose neck curved handle allows easy working. There is also an individual counterbalance within the handle, so you can cut easily without exerting much force. The Santoku knife from the MIYABI 6000MCT range ensures fast, clean, precise cutting. This product delivers high quality with Japanese design and you will use it often.
- Blade core made of MicroCarbide MC63 powder steel embedded in 2 layers of steel. This provides a hardness of approx. 63 Rockwell. (International standard unit of measurement for hardness);- CRYODUR® ice-hardened blades provide particularly good cutting edge retention, corrosion resistance and optimum blade flexibility.- Authentic Japanese blade profile with Tsuchime look (hammered finish).- The symmetrical blade with ultra-sharp Honbazuke edge ensures incredible sharpness.- Dimensionally-stable pakka wood handle for perfect balance, outstanding comfort and fatigue-free cutting with all cutting techniques; sophisticated dark wood look.
191,25 €
225,00 €

Expédition après 10-20 jours ouvrables

Nakiri Japanese kitchen knife Miyabi 34375-171-0 17cm - 1
-15%
Nakiri Couteau de cuisine Miyabi 5000MCD 17cm 34375-171-0
Zwilling Miyabi 5000MCD Nakiri 17 cm is Japanese vegetable knife. The handle is made of Masur birch to give each knife a unique wood-grain pattern. An end cap and subtly styled mosaic pin complete the knife's elegant look. The handle is D-shaped to give the knife perfect balance and control for effortless and precision cutting. The blade has beautiful Damask patterning and a hard core of MicroCarbide MC63 powder steel enclosed within 100 layers of two different steels. The CRYODUR® blade is ice-hardened at -196 degrees Celsius to achieve a hardness rating of around 63 Rockwell that keeps the blade sharp and flexible. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Zwilling Miyabi 5000MCD nakiri vegetable knife made in Japan.
294,07 €
345,97 €

Expédition après 10-20 jours ouvrables

Sujihiki Japanese kitchen knife Miyabi 5000MCD 34378-241-0 24cm - 1
-15%
Sujihiki Couteau de cuisine Miyabi 5000MCD 24cm 34378-241-0
Zwilling Miyabi 5000MCD Sujihiki slicer knife 24 cm is ideal for cutting meat and fish or for slicing a roast. The sujihiki's handle is made of Masur birch to give each knife a unique wood-grain pattern. An end cap and subtly styled mosaic pin complete the knife's elegant look. The handle is D-shaped to give the knife perfect balance and control for effortless and precision cutting. The blade has beautiful Damask patterning and a hard core of MicroCarbide MC63 powder steel enclosed within 100 layers of two different steels. The CRYODUR® blade is ice-hardened at -196 degrees Celsius to achieve a hardness rating of around 63 Rockwell that keeps the blade sharp and flexible. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.Zwilling Miyabi 5000MCD sujihiki slicing knife made in Japan.
294,07 €
345,97 €

Expédition après 10-20 jours ouvrables

Bread knife Miyabi 34376-231-0 23cm - 1
Couteau de cuisine Miyabi 5000MCD 23cm 34376-231-0
Zwilling Miyabi 5000MCD bread knife 23 cm has a long, strong blade. The serrated edge is able to cut through thick, crusty bread easily and evenly and is ideal for every-day kitchen use. The knife has a traditional, practical design and cuts precisely and efficiently. The handle is made of Masur birch to give each knife a unique wood-grain pattern. An end cap and subtly styled mosaic pin complete the knife's elegant look. The handle is D-shaped to give the knife perfect balance and control for effortless and precision cutting. The blade has beautiful Damask patterning and a hard core of MicroCarbide MC63 powder steel enclosed within 100 layers of two different steels. The CRYODUR® blade is ice-hardened at -196 degrees Celsius to achieve a hardness rating of around 63 Rockwell that keeps the blade sharp and flexible. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.Zwilling Miyabi 5000MCD bread knife made in Japan. There are only best kitchen knives in MyGoodKnife’s range.
345,97 €

Expédition après 10-20 jours ouvrables

Santoku Japanese kitchen knife Miyabi 5000MCD Rocking 34388-181-0 18cm - 1
-15%
Santoku Couteau de cuisine Miyabi 5000MCD Rocking 18cm 34388-181-0
Zwilling Miyabi 5000MCD Rocking Santoku 18 cm is the counterpart to the European chef's knife and universally applicable. It is suitable for mincing meat, vegetables and fish. The high, squat CRYODUR blade is sanded on both sides and was hardened in a specially developed process - making it particularly robust and sharp. The 18 cm long blade consists of a particularly hard MicroCarbide powder steel MC63 core surrounded by 100 layers of steel. It is processed with the classic Japanese Honbazuke trigger, resulting in a particular sharpness that glides effortlessly through ingredients. The Santoku's handle is made of Masur birch to give each knife a unique wood-grain pattern. An end cap and subtly styled mosaic pin complete the knife's elegant look. The handle is D-shaped to give the knife perfect balance and control for effortless and precision cutting. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Zwilling Miyabi 5000MCD Rocking Santoku made in Japan. There are only best kitchen knives in MyGoodKnife’s range.
294,07 €
345,97 €

Expédition après 10-20 jours ouvrables

Utility kitchen knife Miyabi 5000MCD Shotoh 34381-141-0 14cm - 1
Couteau de cuisine Miyabi 5000MCD Shotoh 14cm 34381-141-0
Zwilling Miyabi 5000MCD shotoh knife 14 cm cuts sausage, cheese and vegetables into perfect slices, but also meat and fish can be cut into small pieces. The ultra-sharp Honbazuke honing on the symmetrically honed blade delivers extreme sharpness.  The shotoh's handle is made of Masur birch to give each knife a unique wood-grain pattern. An end cap and subtly styled mosaic pin complete the knife's elegant look. The handle is D-shaped to give the knife perfect balance and control for effortless and precision cutting. The blade has beautiful Damask patterning and a hard core of MicroCarbide MC63 powder steel enclosed within 100 layers of two different steels. The CRYODUR® blade is ice-hardened at -196 degrees Celsius to achieve a hardness rating of around 63 Rockwell that keeps the blade sharp and flexible. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Zwilling Miyabi 5000MCD shotoh utility knife made in Japan.
257,26 €

Expédition après 10-20 jours ouvrables

Paring Vegetable knife Miyabi 5000MCD Shotoh 34372-091-0 9cm - 1
Paring Couteau de cuisine Miyabi 5000MCD Shotoh 9cm 34372-091-0
Zwilling Miyabi 5000MCD shotoh paring knife 9 cm is ideal for cutting, cleaning and peeling fruit and vegetables. The shotoh's handle is made from Masur birch to give each knife a unique wood-grain pattern. An end cap and subtly styled mosaic pin complete the knife's elegant look. The handle is D-shaped to give the knife perfect balance and control for effortless and precision cutting. The blade has beautiful Damask patterning and a hard core of MicroCarbide MC63 powder steel enclosed within 100 layers of two different steels. The CRYODUR® blade is ice-hardened at -196 degrees Celsius to achieve a hardness rating of around 63 Rockwell that keeps the blade sharp and flexible. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Zwilling Miyabi 5000MCD shotoh paring knife made in Japan.
216,94 €

Expédition après 10-20 jours ouvrables

Utility kitchen knife Miyabi 6000MCT Gyutoh 34073-161-0 16cm - 1
-15%
Gyuto Couteau de cuisine Miyabi 6000MCT Artisan Gyutoh 16cm 34073-161-0
The GYUTOH measuring 16 cm in length has a smooth, pointed blade which makes the knife well suited to cutting and slicing fish and meat. Large vegetables are also no problem. Miyabi paid attention to making an authentic Japanese blade profile that makes the knife extremely hard and sharp. The cutting qualities are completed by the Pakka wood handle which is comfortable to hold. The blade is manufactured from micro-carbide powder steel which is embedded between two other layers of steel. The blade is hardened even further using a special procedure such as ice-hardening at -196 degrees Celsius in order to achieve extremely high levels of hardness and sharpness. The blade has been ground on both sides and finished using the Honbazuke blade-honing technique. It is also very aesthetically pleasing thanks to the Tsuchime design which looks like the surface has been hammered. The ergonomically shaped handle is made out of cocobolo pakkawood, which is a dark, smooth-grained wood standing in direct contrast to the blade. The handle has a bent shape to make effortless cutting possible. The handle is well balanced which is typical of knives of the MIYABI 6000MCT series. Thanks to this balance, it’s possible to work for extended periods without tiring. With the high-quality, Japanese knife, you can complete many jobs in the kitchen - Blade core made of MicroCarbide MC63 powder steel embedded in 2 layers of steel. This provides a hardness of approx. 63 Rockwell. (International standard unit of measurement for hardness); - CRYODUR® ice-hardened blades provide particularly good cutting edge retention, corrosion resistance and optimum blade flexibility. - Authentic Japanese blade profile with Tsuchime look (hammered finish). - The symmetrical blade with ultra-sharp Honbazuke edge ensures incredible sharpness. - Dimensionally-stable pakka wood handle for perfect balance, outstanding comfort and fatigue-free cutting with all cutting techniques; sophisticated dark wood look.
174,80 €
205,65 €

In stock

Paring Vegetable knife Miyabi 6000MCT Shotoh 34072-091-0 9cm - 1
Paring Couteau de cuisine Miyabi 6000MCT Artisan Shotoh 9cm 34072-091-0
The SHOTOH from Miyabi is designed for the slicing, cutting and peeling of fruit and vegetables. Preparing cold platters or delicious curries containing lots of vegetables are easy with this knife. The double-edged blade and Honbazuke honing give the knife its sharpness.
The knife is part of the MIYABI 6000MCT series and has a blade with a hammered finish and a Tsuchime look. The handle is made of premium, smooth-grained cocobolo pakka wood. A mosaic pin gives it a special design feature. The handle will retain its shape and has easy care properties. The knife is finely balanced to make cutting an effortless and pleasurable task.
The blade is manufactured from MicroCarbide powder steel embedded between two additional steel layers. The central section achieves a hardness rating of around 63 Rockwell. The knife also undergoes special hardening procedures such as ice hardening at -196 degrees Celsius. This increases the blade's stability, flexibility, durability and robustness to provide you with a practical and sharp knife to effortlessly carry out a multitude of kitchen tasks.
- Blade core made of MicroCarbide MC63 powder steel embedded in 2 layers of steel. This provides a hardness of approx. 63 Rockwell. (International standard unit of measurement for hardness); - CRYODUR® ice-hardened blades provide particularly good cutting edge retention, corrosion resistance and optimum blade flexibility. - Authentic Japanese blade profile with Tsuchime look (hammered finish). - The symmetrical blade with ultra-sharp Honbazuke edge ensures incredible sharpness. - Dimensionally-stable pakka wood handle for perfect balance, outstanding comfort and fatigue-free cutting with all cutting techniques; sophisticated dark wood look.
136,29 €

Expédition après 10-20 jours ouvrables

Paring Vegetable knife Miyabi 5000MCT MIZU Shotoh 32915-141-0 14cm
-15% Sold out
Paring Couteau de cuisine Miyabi MIZU Shotoh 14cm 32915-141-0
The elegant  knife Miyabi 5000MCT Shotoh 32915-141-0 14cm is designed for the slicing, cutting and peeling of fruit and vegetables.  This series MIZU 5000MCT has a core of MC 63, microcarbide powder steel (63 HRC) covered with 2 layers of ice- hardened Cryodur stainless steel. Cutting edge has an angle of 19°. Hammered finish (Tsuchime) which prevents food from sticking to the blade. The ergonomic handle of micarta. Preparing cold platters or delicious curries containing lots of vegetables are easy with this knife.It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Made in Seki, Japan. 
150,12 €
176,61 €

Sold out

Gyuto Japanese kitchen knife Miyabi 5000MCD 34373-201-0 20cm - 1
-15% Sold out
Gyuto Couteau de cuisine Miyabi 5000MCD 20cm 34373-201-0
Zwilling Miyabi 5000MCD Gyutoh, 20cm. The knives in the MIYABI 5000MCD series combine functionality with good looks in a supremely harmonious way. Since time immemorial, aesthetics have played a key role in Japanese cuisine. The look of a dish and the way it is presented on the plate are just as much a part of the pleasure as its taste and aroma. In the kitchen Japanese chefs are just as demanding where aesthetics are concerned as they over functionality. The MIYABI 5000MCD series of knives provides professionals and ambitious hobby chefs with a set of precision tools that combine perfect functionality and ergonomics with unique design. - Blade core of extremely hard MicroCarbide MC63 powder steel embedded in 100 layers of steel. - CRYODUR® blade, hardened using a specially developed process (including ice-hardening at –196°C) that guarantees extreme hardness. - Symmetrical blade with ultra-sharp Honbazuke honing. - Thin, stable blade with authentic Japanese blade profile: symmetrical cutting edge with 19° angle - Traditional “D” handle of Masur birch for perfect balance, optimum control and tireless cutting. There are only best kitchen knives in MyGoodKnife’s range.
294,07 €
345,97 €

Sold out