Coltelli di Damasco

Filtra per
Prezzo
€ €
Produttori
Lunghezza lama, mm
Paese
Acciaio
Maniglia
Collezione
Durezza
Filtro
Kiritsuke Japanese kitchen knife Hideo Kitaoka CN4216 24cm
Sold out
Coltello da cucina giapponese Kiritsuke Hideo Kitaoka 24cm CN4216
Kiritsuke knife 24 sm. Handmade by Mr. Hideo Kitaoka. Damascus blade - 11 layers of Shirogami steel. (White steel), magnolia-wood handle. Blade is sharpened on one side.
233,87 €

Sold out

Coltello da cucina giapponese Santoku Yoshimi Kato Black Nickel VG-10 D-1902 16.5cm
Sold out
Coltello da cucina giapponese Santoku Yoshimi Kato Black Nickel VG-10 16.5cm D-1902
Un versatile coltello da cucina giapponese santoku, realizzato a mano dal fabbro Yoshimi Kato. La lama è lunga 165 mm. Il manico è in palissandro. La lama è in damasco Black Nickel VG-10. Yoshimi Kato è un parente e allievo del rinomato maestro Hiroshi Kato. Il coltello santoku può essere utilizzato come sostituto di un coltello da chef. Può essere utilizzato per tritare e affettare verdure, carne e altri alimenti. Il coltello non è lavabile in lavastoviglie e non deve essere utilizzato su alimenti congelati. Il filo del santoku Yoshimi Kato è molto sottile.
222,31 €

Sold out

Nakiri Japanese kitchen knife Ittetsu Middle VG-10 Damascus IWZ-107 15cm
Sold out
Coltello da cucina giapponese Nakiri Ittetsu Middle VG-10 Damascus 15cm IWZ-107
Ittetsu middle nakiri knife with a blade length of 15 cm. This Japanese kitchen knife is designed for cutting and shredding vegetables. Double-sided sharpening. The blade is made of Damascus steel VG10, 33 layers. The handle is made of moisture-resistant laminated material Pakka wood. Ittetsu knives cannot be washed in the dishwasher. This knife cannot be used as a kitchen hatchet or to cut excessively hard products. Ittetsu knives are made in Japan.
131,47 €

Sold out

Santoku Japanese kitchen knife TOJIRO Ouran FD-612 16.5cm
Sold out
Coltello da cucina giapponese Santoku TOJIRO Ouran 16.5cm FD-612
Coltello Santoku Tojiro Ouran con lama da 165 mm. Questo coltello da cucina giapponese multiuso ha una lama realizzata con 63 strati di acciaio Damasco VG10. Impugnatura ovale in legno di ciliegio. Inoltre, l'impugnatura è dotata di un collarino che la protegge dalle deformazioni. "Ouran" (桜嵐) prende il nome dall'immagine di un fiore di ciliegio che ondeggia al vento. Ogni coltello è confezionato in una scatola individuale. Peso 140 g.
137,85 €

Sold out

Santoku Japanese kitchen knife Tojiro F-331 17cm
Sold out
Santoku Coltello da cucina giapponese TOJIRO DP Damascus VG10 17cm F-331
Supreme japanese Santoku knife Tojiro F-331 with 17 cm blade. Santoku is the Japanese version of the chef's knife. This santoku knife has classic kitchen knife's handle made of reinforced laminated material. Real forged multilayered blade made by the same manufacturing process as Japanese sword making. It is very precise and has excellent sharpness. Each knife comes in an individual box.
91,94 €

Sold out

Gyuto Japanese kitchen knife Ittetsu Damascus VG10 IWC-105 21cm
Sold out
Coltello da cucina giapponese Gyuto (coltello da chef) Ittetsu Damascus VG10 21cm IWC-105
Chef's knife Gyuto Ittetsu with a blade length of 21 cm. The handle is made of mahogany. The blade of this chef knife is made of VG10 Damascus steel, 33 layers, hammered finish. Hand wash only with warm water and towel dry. Japanese kitchen knives have a very thin blade, so it is not allowed to cut any hard foods. Ittetsu knives are made in  Echizen city, Japan. This Ittetsu Chef's gyuto knife weights 375 g. 
123,51 €

Sold out

Gyuto Japanese kitchen knife Miyabi 8000DP Hibana 54481-201-0 20cm
Sold out
Gyuto (coltello da chef) Coltello da cucina giapponese Miyabi 800DP Hibana 20cm 54481-201-0
The Gyuto Japanese kitchen knife Miyabi 8000DP Hibana 54481-201-0 is suitable for chopping, slicing, or dicing meat, fish and vegetable. Sleek black and brass spacers on the handle add to the beauty and weight that promotes sturdiness in hand and maneuverability at the tip. The MIYABI Hibana collection features a beautiful 49-layer Spark Damascus pattern on the blade that both strengthens and protects the core of FC61 steel. FRIODURx2 hardening improves the microstructure of the steel for improved cutting performance, corrosion resistance and durability. Hand wash only. Handcrafted in Seki, Japan.
225,00 €

Sold out

Gyuto Japanese kitchen knife Yu Kurosaki Fujin VG10 Damascus ZVD-210CHO 21cm
Sold out
Gyuto (coltello da chef) Coltello da cucina giapponese Yu Kurosaki Fujin VG10 Damascus 21cm ZVD-210CHO
Yu Kurosaki Chef knife, 21 cm. The handle is made this time of oak. Yu Kurosaki Fujin series fearture Nickel Damascus-patterned blades with a core of VG-10 stainless steel for professional with a hardness of 60-61 HRC, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. Handmade by Mr. Yu Kurosaki.
313,71 €

Sold out

Nakiri Japanese kitchen knife Yu Kurosaki Fujin VG10 Damascus ZVD-165NARB 16.5cm
Sold out
Nakiri Coltello da cucina giapponese Yu Kurosaki Fujin VG10 Damascus 16.5cm ZVD-165NARB
Yu Kurosaki Fujin series nakiri with Nickel Damascus-patterned blades with a core of VG-10 stainless steel. Hardness of 60-61 HRC provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Nakiri Fujin VG10 Damascus Series is made rosewood. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
290,32 €

Sold out

Kiritsuke Japanese kitchen knife Hideo Kitaoka Shirogami CN-22161 24cm
Sold out
Kiritsuke Coltello da cucina giapponese Hideo Kitaoka Shirogami 24cm CN-22161
Handmade single-beveled kiritsuke knife by Mr. Hideo Kitaoka. 24 cm blade is made of carbon steel with Shirogami steel core Handle made of a natural pakkawood.  Hideo Kitaoka in Takefu, Fukui Province specializes in the production of high-quality single-edged kitchen knives. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry. The knife has rounded tip. 
177,42 €

Sold out

Coltello da cucina giapponese Sujihiki Seki Kanetsugu Zuiun Kiwami 9509 24cm
Sold out
Coltello da cucina giapponese Sujihiki Seki Kanetsugu Zuiun Kiwami 24cm 9509
The sujihiki knife 9509 Zuiun Kiwami series from Seki Kanetsugu will charm you with its impressive design and the highest quality of workmanship and materials used. The Sujihiki is a double edge slicing knife with a long narrow blade that smoothly slices through meat or vegetables and preserves the integrity of each ingredient's freshness. The Zuiun is a special model manufactured to celebrate the company's centennial. Seki Kanetsugu Zuiun knives have blades with a wavy “hamon” pattern similar to Japanese swords. In its current incarnation, Seki Kanetsugu Cutlery has been making modern blades that realize the characteristics of Japanese swords--unbreakable, unbending and very sharp. The company also infused the Zuiun with the spirit of such swords. The blade is made using the San Mai technique, where the core is made of high-speed powder steel SPG2 (Super Powder Gold 2) and covered with 62-layer damascus. DLC (Diamond Like Carbon) blade coating is a thin layer that is applied to the surface to improve the properties of the knife. Surface treatment increases resistance to wear and abrasion.Finely sharpened by artisans, the surface of the blade features a scudding cloud-like pattern. It is also forged into a V-shaped "hamaguri-ba" blade, reflecting a characteristic of Japanese swords.The beautiful, very durable and easy-to-clean handle is made of laminate, has an octagonal shape and fits perfectly in the hand. All Seki Kanetsugu Zuiun Kiwami knives are made by hand. Delivered in wooden gift boxes. Weight 162 g.
282,26 €

Sold out

Japanese kitchen knife Yoshimi Kato Petty Nickel Damascus VG10 D-1900 12cm
Sold out
Coltello da cucina giapponese Yoshimi Kato Petty Nickel Damascus VG10 12cm D-1900
Un coltello da cucina giapponese con lama da 12 cm. Realizzato a mano dal maestro artigiano Yoshimi Kato, parente e allievo del rinomato maestro artigiano Hiroshi Kato. La lama del coltello è in acciaio nichel-damasco con anima VG10. Il manico è in legno. Questo coltello non è lavabile in lavastoviglie e non deve essere utilizzato per tagliare cibi duri, surgelati o contenenti ossa. Si consigliano taglieri in legno e plastica.
184,68 €

Sold out

Japanese kitchen knife Nakiri Yoshimi Kato Black Nickel VG-10 165 mm D-1903 16.5cm
Sold out
Nakiri Coltello da cucina giapponese Yoshimi Kato Black Nickel VG-10 165 mm 16.5cm D-1903
Japanese nakiri knife. Hand forged by Yoshimi Kato who is a certified traditional craftsman in Takefu, Fukui prefecture in Japan. Blade Black Nickel VG-10. Blade length 165 mm. Handle – rosenwood. Nakiri is a vegetable knife. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
222,31 €

Sold out

Chef knife Miyabi 5000MCD 67 Gyutoh 34401-201-0 20cm - 1
Sold out
Gyuto (coltello da chef) Coltello da cucina giapponese Miyabi 5000MCD 67 20cm 34401-201-0
Zwilling Miyabi 5000MCD 67 japanese gyutoh or chef's knife has a MicroCarbide powder steel MC66 core which gives extremely good sharpness and cutting edge retention. The blade has 132 outer layers of steel which surround the core and make up the unique Damascus-design pattern on the blade. The cutting edge is Honbazuke-honed and symmetrical (not single bevel), so can be used by those both right and left-handed. There is no finger guard so the whole length of the cutting edge can be used. The black Ash wood handle sits comfortably in the hand, allowing firm control and tireless working. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Rockwell hardness of approximately 66. Zwilling Miyabi 5000MCD 67 gyotoh chef's knife made in Japan.
362,10 €

Sold out

Santoku Japanese kitchen knife Miyabi 5000FCD 34684-181-0 18cm - 1
Sold out
Santoku Coltello da cucina giapponese Miyabi 5000FCD RAW 18cm 34684-181-0
MIYABI 5000 FCD Santoku, 18cm blade length. This Japanese santoku has a hard fine carbide steel core for very good cutting edge retention and sharpness. Santoku translates as "Three Virtues", these being meat, fish and vegetables. The flat cutting edge lends itself to a chopping motion rather than the rocking cutting movement of European chef's knives. The blade core is surrounded by 48 outer layers of steel which make up the unique Damascus-design pattern on the blade. The cutting edge is Honbazuke-honed and symmetrical (not single bevel), so can be used by those both right and left-handed. There is no finger guard so the whole length of the cutting edge can be used. The handle and half-bolster join seamlessly for comfortable use. The smooth surface helps to prevent the formation of calluses on the thumb and forefinger. Hand wash only for best care, and maintain and sharpen using a whetstone. We’d recommend using a wooden chopping board rather than glass, ceramic or stone boards as these will dull the cutting edge. - FC61 fine carbide steel blade core; - 48 layers of steel surrounding the core create the Damascus-design; - FRIODUR ice-hardened for extreme hardness; - Rockwell hardness of approximately 61; - Symmetrical cutting edge; - Pakka wood handle; - Steel mosaic pin and handle end cap; - Made in Japan.
206,45 €

Sold out

Japanese kitchen knife Santoku Yu Kurosaki Fujin VG10 Damascus ZVD-165SAOWQ 16.5cm
Sold out
Santoku Coltello da cucina giapponese Yu Kurosaki Fujin VG10 Damascus 16.5cm ZVD-165SAOWQ
Santoku by Yu Kurosaki with Nickel Damascus-patterned blade. Blade has a core of VG-10 stainless steel. Hardness of 60-61 HRC provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of santoku Fujin VG10 Damascus Series is made of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
290,32 €

Sold out

Japanese kitchen knife Bunka Yu Kurosaki Fujin VG10 Damascus ZVD-165BUOWQ 16.5cm
Sold out
Bunka Coltello da cucina giapponese Yu Kurosaki Fujin VG10 Damascus 16.5cm ZVD-165BUOWQ
Yu Kurosaki Bunka knife with Nickel Damascus-patterned blade with a core of VG-10 stainless steel. Hardness of 60-61 HRC provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Bunka Fujin VG10 Damascus Series is made of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
290,32 €

Sold out

Japanese kitchen knife Nakiri Yu Kurosaki Fujin VG10 Damascus ZVD-165NAOWQ 16.5cm
Sold out
Nakiri Coltello da cucina giapponese Yu Kurosaki Fujin VG10 Damascus 16.5cm ZVD-165NAOWQ
Yu Kurosaki Fujin series nakiri with Nickel Damascus-patterned blades with a core of VG-10 stainless steel. Hardness of 60-61 HRC provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Nakiri Fujin VG10 Damascus Series is made of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
290,32 €

Sold out

Gyuto Japanese kitchen knife Tojiro Shippu Black FD-1594 21cm
Sold out
Gyuto (coltello da chef) Coltello da cucina giapponese TOJIRO Shippu Black 21cm FD-1594
The Shippu Black series from Tojiro features a 63 layered Damascus Steel blade with a VG-10 core. The blades are anodized black to highlight the elegant patterning.The chestnut wood handle is both beautiful and practical.
181,45 €

Sold out

Gyuto Japanese kitchen knife Yu Kurosaki Fujin VG10 Damascus ZVD-210CHOWQ 21cm
Sold out
Gyuto (coltello da chef) Coltello da cucina giapponese Yu Kurosaki Fujin VG10 Damascus 21cm ZVD-210CHOWQ
Yu Kurosaki Chef knife, 21 cm. The handle is made this time of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Yu Kurosaki Fujin series fearture Nickel Damascus-patterned blades with a core of VG-10 stainless steel for professional with a hardness of 60-61 HRC, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. Handmade by Mr. Yu Kurosaki.
313,71 €

Sold out

Kiritsuke Japanese kitchen knife Hideo Kitaoka Shirogami CN-2216 24cm
Sold out
Kiritsuke Coltello da cucina giapponese Hideo Kitaoka Shirogami 24cm CN-2216
Handmade single-beveled kiritsuke knife by Mr. Hideo Kitaoka. 24 cm blade is made of carbon steel with Shirogami steel core Handle made of a natural pakkawood.  Hideo Kitaoka in Takefu, Fukui Province specializes in the production of high-quality single-edged kitchen knives. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
177,42 €

Sold out

Petty Japanese kitchen knife Shigeki Tanaka VG10 Damascus ST-1701 12cm
Sold out
Petty Coltello da cucina giapponese Shigeki Tanaka VG10 Damascus 12cm ST-1701
Petty knife handmade in Japan by Mr. Shigeki Tanaka. Blade length 12 cm. The blade is made of VG-10 premium Japanese steel. This knife has red western handle.  Only hand wash allowed.
104,03 €

Sold out

Santoku Japanese kitchen knife Miyabi 8000DP Hibana Rocking 54488-181-0 18cm
Sold out
Santoku Coltello da cucina giapponese Miyabi 800DP Hibana Rocking 18cm 54488-181-0
The Miyabi 800DP Hibana Rocking 54488-181-0 supports Western circular motion and Asian chopping. The versatile blade is ideal for chopping vegetables, slicing through meats and preparing fish. Sleek black and brass spacers on the handle add to the beauty and weight that promotes sturdiness in hand and maneuverability at the tip. The MIYABI Hibana collection features a beautiful 49-layer Spark Damascus pattern on the blade that both strengthens and protects the core of FC61 steel. FRIODURx2 hardening improves the microstructure of the steel for improved cutting performance, corrosion resistance and durability. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Handcrafted in Seki, Japan.
225,00 €

Sold out

Gyuto Japanese kitchen knife Miyabi 8000DP Hibana 54481-161-0 16cm
Sold out
Coltello da cucina giapponese Gyuto (coltello da chef) Miyabi 800DP Hibana 16cm 54481-161-0
The Chef's Knife gyuto Miyabi 800DP 54481-161-0 is the workhorse of the kitchen. Whether chopping, slicing, or dicing meat and vegetables, the broad, sturdy blade and comfortable, balanced size will quickly become the go-to knife for everyday tasks. Sleek black and brass spacers on the handle add to the beauty and weight that promotes sturdiness in hand and maneuverability at the tip. The MIYABI Hibana collection features a beautiful 49-layer Spark Damascus pattern on the blade that both strengthens and protects the core of FC61 steel. FRIODURx2 hardening improves the microstructure of the steel for improved cutting performance, corrosion resistance and durability. 
200,81 €

Sold out