Filtrar por
Precio
€ €
Marcas
Longitud de la hoja
Size
Sex
Pais
Acero
Mango
Colección
Dureza
Vaina
Bloqueo
Materiales
Filter
Cuchillo Lanzador Cold Steel Micro Flight 80STMB 7.6cm
Cuchillo de hoja fija Cold Steel Micro Flight 7.6cm 80STMB
Cold Steel Black Fly es un cuchillo arrojadizo monolítico. Largo total 203 mm. La hoja tiene 76 mm de largo y está hecha de acero al carbono resistente con un revestimiento negro resistente a la oxidación, espiga completa. El mango de acero está equipado con un orificio para cordón. Peso del cuchillo aproximadamente 77 g.
8,69 €

Hay existencias

Cuchillo Lanzador Cold Steel Mini Flight Sport 80STK10Z 6.3cm
Cuchillo de hoja fija Cold Steel Mini Flight Sport 6.3cm 80STK10Z
El cuchillo para lanzar Cold Steel Mini Flight Sport mide en general 10". El cuchillo tiene una hoja de 2.5" hecha de acero al carbono 1055, borde estándar, acabado negro. El mango con orificio para cordón. Espiga completa. Construcción de una sola pieza con punta afilada de doble filo. Peso 6.4 oz.
11,21 €

Hay existencias

Navaja Böker Sherman EDC 110665 7.5cm
Navaja Böker Sherman EDC 7.5cm 110665
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
For the Böker Sherman EDC 110665 blade, Magnacut was used for the first time, which is not without reason glorified as “wonder steel”. Unlike the tool steels usually used, this steel was developed specifically for knife making. The three desirable properties of a steel - edge retention, toughness and rust resistance (stainless in the DIN category) - represent a conflict of goals. To make the steel rust-resistant, the addition of chromium is necessary, which makes the structure coarse, brittle and susceptible to fracture under normal conditions. High hardness, which has a positive influence on cutting durability, is usually achieved at the expense of toughness. With Magnacut, despite the high chromium content of 10.7% and an impressive hardenability of over 62HRC, it has been possible to achieve a very fine microstructure and thus high toughness and shock-load tolerance. The addition of nitrogen plays a central role here. Nitrogen is actually a steel pest in the alloy. However, due to sophisticated heat treatment, among other things, the nitrogen of the Magnacut is integrated into the crystalline lattice structure of the steel structure and thus achieves the otherwise contradictory material properties.

The central structural difference to the M4 Damascus model is the flipper, elegantly integrated into the contours, which allows the blade to slide open smoothly with a small impulse and invites you to play. The ball-bearing blade is opened alternatively by thumb stud and locked by a sturdy titanium framelock with stonewash finish. An overdrive stop acts as an over-extension protection for the lock. The milled titanium clip (tip-up/r) with a steel ball as well as the handle scales made of wild carbon fibre complete the harmonious overall picture.

A special highlight of the Boker Sherman EDC is the protruding backspacer made of Damascus, which is equipped with a lanyard hole in elongated slotted design. The Damascus of the backspacer was forged from various materials from the production of M4 Sherman tanks by Chad Nichols in the Customized Ladder pattern and is reminiscent of the tank tracks left in the ground by the heavy chains of the M4 Sherman.
241,13 €

Hay existencias

Cuchillo Lanzador Cold Steel Gladius 80TGS 21cm
Cuchillo de hoja fija Cold Steel Gladius 21cm 80TGS
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
Cold Steel Gladius is a one-piece throwing knife made from S50C steel. Full length 356 mm. The 210mm long Roman point blade is made of tough carbon steel with a black rust resistant finish, full tang. The ergonomic steel handle has a lanyard hole and can be wrapped in paracord. Knife weight approximately 580 g.
27,02 €

Hay existencias

Cuchillo Lanzador Condor Tool & Knife Full Spin 401210HC 25.1cm
Cuchillo de hoja fija Condor Tool & Knife Full Spin 25.1cm 401210HC
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
Condor Tool & Knife Full Spin throwing knife is 14.75" (37.47cm) overall. Thrower has a 3.5" (8.89cm) black finish double edge 1075HC steel blade. One-piece construction. Weight 22.72 oz.
52,42 €

Hay existencias

Cuchillo Lanzador Cold Steel True Flight Thrower 80TFTC 17.1cm
Cuchillo de hoja fija Cold Steel True Flight Thrower 17.1cm 80TFTC
El cuchillo arrojadizo Cold Steel True Flight Thrower tiene un total de 12". El cuchillo tiene una hoja de acero 1055HC con acabado negro de 6.75". Mango envuelto en cordón verde OD. Funda de cinturón Cor-Ex negra. Peso 11.02 oz.
29,47 €

Hay existencias

Cuchillo Lanzador Cold Steel Pro Flight Sport 80STK14Z 11.4cm
Cuchillo de hoja fija Cold Steel Pro Flight Sport 11.4cm 80STK14Z
El cuchillo arrojadizo Cold Steel Pro Flight Sport mide en total 13,25". El cuchillo tiene una hoja de 4,5" hecha de acero al carbono 1055, filo estándar, acabado en negro. El mango de acero al carbono negro con orificio para cordón. Espiga completa. Construcción de una sola pieza con punta afilada de doble filo. Peso 11.2 oz.
18,55 €

Hay existencias

Cuchillo Lanzador Cold Steel Sure Flight Sport 80STK12Z 6.3cm
Cuchillo de hoja fija Cold Steel Sure Flight Sport 6.3cm 80STK12Z
El cuchillo arrojadizo Cold Steel Sure Flight Sport tiene un total de 12". El cuchillo tiene una hoja de 2.5" hecha de acero al carbono 1055, borde estándar, acabado negro. El mango de acero al carbono negro con orificio para cordón. Espiga completa. Construcción de una sola pieza con punta afilada de doble filo. Peso 8.2 oz.
11,95 €

Hay existencias

Cuchillo de hoja fija Böker AK1 Damascus 122509DAM 7.9cm
Agotado
Cuchillo de hoja fija Böker AK1 Damascus 7.9cm 122509DAM
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
Created in cooperation with the young knifemaker Alex Kremer and Daily Customs, the Böker AK1 Damascus 122509DAM is a versatile small everyday knife which is not only completely convincing as an EDC but already enjoys cult status. The great success of the models with RWL-34 blade steel prompted  to design a high-end version. The new material Fat Carbon Space-Coral Silver sets a completely new accent. The cross-section of the pattern is rotated by 90° and the even spacing of the fine lines are arranged in ingeniously ordered chaos.
The blade is made of stainless Damascus by Chad Nichols in the Boomerang pattern. This creates a charming visual interplay between the materials, which also both have the best mechanical properties in their respective functions.The handle scales can be removed effortlessly with the included Torx key, so that the elaborately crafted lanyard hole at the end of the handle can be turned around when the handle scales are removed and optionally disappear into the handle. Supplied with a high-quality black leather sheath, which has a sewn-in Ulticlip and can be conveniently attached to the hem of the pocket thanks to the locking spring clip. This allows the Boker AK1 Damascus to be drawn effortlessly while the sheath is reliably held in place by the Ulticlip. Handmade in the Boker Knife Manufactory in Solingen.
401,61 €

Agotado