Hay existencias
Productos
Subcategorías
Hay 6374 products.
Hay existencias
Hay existencias
Hay existencias
Hay existencias
Hay existencias
Hay existencias
The rack holds a minimum of 3 knives. All the magnets are cut from a piece of wood of the mentioned length, but since all the magnets are made by hand and otherwise are different from each other, the length can also vary by 2 – 3 centimetres. Length: 23-25 cm, width: 7-9 cm, depth: 3 cm.
For each individual knife, there are five small neodymium magnets, which ensure that the knife does not hang and “dangle” around a single magnet.
Hay existencias
Shipping after 10-20 business days
Hay existencias
For the Böker Sherman EDC 110665 blade, Magnacut was used for the first time, which is not without reason glorified as “wonder steel”. Unlike the tool steels usually used, this steel was developed specifically for knife making. The three desirable properties of a steel - edge retention, toughness and rust resistance (stainless in the DIN category) - represent a conflict of goals. To make the steel rust-resistant, the addition of chromium is necessary, which makes the structure coarse, brittle and susceptible to fracture under normal conditions. High hardness, which has a positive influence on cutting durability, is usually achieved at the expense of toughness. With Magnacut, despite the high chromium content of 10.7% and an impressive hardenability of over 62HRC, it has been possible to achieve a very fine microstructure and thus high toughness and shock-load tolerance. The addition of nitrogen plays a central role here. Nitrogen is actually a steel pest in the alloy. However, due to sophisticated heat treatment, among other things, the nitrogen of the Magnacut is integrated into the crystalline lattice structure of the steel structure and thus achieves the otherwise contradictory material properties.
The central structural difference to the M4 Damascus model is the flipper, elegantly integrated into the contours, which allows the blade to slide open smoothly with a small impulse and invites you to play. The ball-bearing blade is opened alternatively by thumb stud and locked by a sturdy titanium framelock with stonewash finish. An overdrive stop acts as an over-extension protection for the lock. The milled titanium clip (tip-up/r) with a steel ball as well as the handle scales made of wild carbon fibre complete the harmonious overall picture.
A special highlight of the Boker Sherman EDC is the protruding backspacer made of Damascus, which is equipped with a lanyard hole in elongated slotted design. The Damascus of the backspacer was forged from various materials from the production of M4 Sherman tanks by Chad Nichols in the Customized Ladder pattern and is reminiscent of the tank tracks left in the ground by the heavy chains of the M4 Sherman.
Hay existencias
The folding knife Helle Kletten Kebony 662K is the sister knife of Kletten. Its robust construction with a back lock mechanism and scandi grind blade makes this a perfect companion for any adventure and has quickly become a staff favorite.
Kebony is actually not a type of wood, but rather an improvement of traditional, softer Northern wood. By adding furfuryl alcohol (based on waste biomass), the cell structure is altered in a secret process. The infusion locks the wood cells and strengthens the material by 50% in the process and stabilizes the wood.If sealed with oil and treated occasionally, the handle will remain dark. If untreated, it will turn grey and get an aged look.
This unique pocket knife takes its name from a small and rugged hill known as “Kletten” by the locals, situated near the Helle factory and overlooking the small village of Holmedal.
The short blade is made from Helle triple laminated stainless steel and has a classic Scandinavian grind..
Hay existencias
The folding knife Rough Rider Rhino Toe RR006 is 4" (10.16 cm) closed. The knife has a spear and wharncliffe blades made from tool steel D2, satin finish. The handle is made of denim micarta. The model has a nickel silver bolsters. Comes in metal tin.
Hay existencias
Hay existencias
Hay existencias
Hay existencias
Hay existencias
Hay existencias
Hay existencias
Hay existencias
The sturdy Magnum Fire Fighter 01LL470 is a reliable rescue knife that combines numerous practical functions and can save lives in an emergency. The black-coated reverse tanto blade made of 440A is equipped with a partial serrated edge and is opened with a spring-assisted flipper. A sturdy linerlock locks the blade open. The red anodised aluminium handle always lies securely in the hand and has a detailed Air Force emblem. With glass breaker, belt cutter and practical clip (tip-down/r).
Hay existencias
The rack holds a minimum of 5 knives. All the magnets are cut from a piece of wood of the mentioned length, but since all the magnets are made by hand and otherwise are different from each other, the length can also vary by 2 – 3 centimetres. Length: 37-40 cm, width: 7-9 cm, depth: 3 cm.
For each individual knife, there are five small neodymium magnets, which ensure that the knife does not hang and “dangle” around a single magnet.
Hay existencias
The Böker Magnum Army Rescue Bronze 01LL471 is fully functional and ready to use, but they have not been designed for the daily, demanding use of professional first responders. The bronze anodised aluminium handle always fits securely in the hand and is provided with a detailed army emblem. The equipment of this rescue knife offers a multitude of functions for any mission: glass-breaker, belt-cutter, pocket clip and a sturdy blade made of 440 stainless steel. Black coated partially serrated reverse tanto blade with flipper and assisted opener. The Böker Magnum Army Rescue Bronze 01LL471 knife weighs 139 g.
Shipping after 10-15 business days
Hay existencias
