Filtrer
Prix
€ €
Fabricants
Longueur des cordes, mm
Taille
Sex
Pays
Acier
Poignée
Série
Dureté
Etui
Verrouillage
Matériel
Filtrer
Nakiri Couteau Japonais Gihei Hamono Aogami 2 Iron clad GH-503 15cm
Sold out
Nakiri Couteau de cuisine Gihei Hamono Aogami 2 Iron clad 15cm GH-503
Japanese kitchen knife azuma nakiri 150 mm by Gihei Hamono. Blade is made of Aogami 2 steel with iron clad. Aogami #2 by Hitachi sometimes called Blue Paper #2 since the steel is wrapped in blue paper. It has a very good edge sharpness and excellent edge retention. This Gihei Hamono Nakiri has a handle of baked magnolia. Never wash any Japanese knife in a dishwasher. This knife has a thin blade and should not be used on hard items such as bones or frozen foods.
120,97 €

Sold out

Gyuto Couteau Japonais Ryusen Hamono Blazen Wa BZ-405 18cm
Sold out
Gyuto Couteau de cuisine Ryusen Hamono Blazen Wa 18cm BZ-405
Ryusen Hamono Blazen Wa chef knife with 18 cm blade and perfectly redesigned Japanese octagonal handle. Blazen series are constructed out of a core of SG-2, sandwiched between 2 layers of stainless steel. The beautiful lines of damascus steel on the blade end up in a higher positioned Nashiji finish. Esthetically intriguing and in combination with the thin blade, it also provides little resistance while cutting. The combination of handle, weight, balance and the extremely thin and sharp cutting edge give tremendous comfort while cutting.
250,00 €

Sold out

Sujihiki Couteau Japonais Ryusen Hamono Bonten Unryu BU-309 27cm
Sold out
Sujihiki Couteau de cuisine Ryusen Hamono Bonten Unryu 27cm BU-309
Sujihiki knife Ryusen Hamono Bonten Unryu Wa with 27 cm blade. The Sujihiki is a double edge slicing knife with a long narrow blade that smoothly slices through meat or vegetables. The Bonten Unryu is one of the signature lines by Ryusen. It is considered as one of the best VG10 line by any Japanese maker, because of its unmatched artistics and more importantly, their VG10 blades are hande forged one-by-one. The blade of the Unryu wa series, is constructed identical as the western handle Unryu series. It has a core of VG-10, with 63 layers of stainless damascus steel. The blade is relatively thin, with a medium / light weight, but not as thin as a laser. Due to the classic Japanese perfectly shaped octagonal handle, it is easy to control and effortlessly will do exactly what it is made for cutting perfectly. The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Gyuto  knife goes in black gift box.
374,19 €

Sold out

Gyuto Couteau Japonais Ryusen Hamono Bonten Unryu BU-303 24cm
Sold out
Gyuto Couteau de cuisine Ryusen Hamono Bonten Unryu 24cm BU-303
The Bonten Unryu is one of the signature lines by Ryusen. It is considered as one of the best VG10 line by any Japanese maker, because of its unmatched artistics and more importantly, their VG10 blades are hande forged one-by-one. The blade of the Unryu wa series, is constructed identical as the western handle Unryu series. It has a core of VG-10, with 63 layers of stainless damascus steel. The blade is relatively thin, with a medium / light weight, but not as thin as a laser. Due to the classic Japanese perfectly shaped octagonal handle, it is easy to control and effortlessly will do exactly what it is made for cutting perfectly. The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Gyuto  knife goes in black gift box.
290,32 €

Sold out

Santoku Japanese kitchen knife Mcusta Classic Pro Zebra HFZ-8003D 18cm - 1
Sold out
Santoku Couteau de cuisine Mcusta Zanmai Classic Pro Zebra 18cm HFZ-8003D
Mcusta Zanmai Classic Pro Zebra Santoku knife. Blade lenght is 18 cm. Santoku means 'Three Virtues' or 'To solve Three Problems'. The virtues or problems are slicing, dicing and mincing. The blade of Mcusta Zanmai Classic Pro Zebra santoku knife is made of of Damascus steel (VG-10), 33 layers. The handle is made of pakka wood with mosaic pin. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
170,97 €

Sold out

Gyuto Japanese kitchen knife Mcusta Classic Damascus HKC-3005D 21cm - 1
Sold out
Gyuto Couteau de cuisine Mcusta Zanmai Classic Damascus 21cm HKC-3005D
Mcusta Zanmai Classic Gyuto, 21cm. The gyuto is a Japanese designed chef’s knife. Like the familiar western styled chef’s knife, gyutos are commonly tall at the heel, have a reasonably flat profile toward the heel for chopping, a belly toward the tip of the blade for rock cutting, and a pointed tip for precision work. The blade of Mcusta Zanmai Classic gyuto knife is coated with 33 layers of Damascus steel and has a VG-10 core. The handle is made from Corian, a composite material that consists of 2/3 natural minerals and 1/3 acrylic with pigment. Blade length: 21 cm
149,19 €

Sold out

Santoku Japanese kitchen knife Mcusta Revolution ZRB-1215G 15cm - 1
Sold out
Santoku Couteau de cuisine Mcusta Zanmai Revolution 15cm ZRB-1215G
Mcusta Zanmai Revolution Kosantoku is fantastic small japanese chef's knife with a very thin 3-layer steel blade and SPG2 core, a japanese powder steel known for excellent resistance to wear and corrosion. The 62° Rockwell blade displays hardness, toughness, and flexibility for ultimate sharpness and long lasting edge retention.The beautifully designed handle of black pakka wood lies perfectly in the hand and gives a firm and steady grip. The handle of Mcusta Zanmai Revolution Kosantoku is accented with traditional Japanese decorative pin. Blade length: 15 cm. Full length: 30 cm. Weight: 146 gram. Handcrafted in Seki city, Japan.
169,35 €

Sold out

Santoku Couteau Japonais Gihei Hamono Aogami 2 Iron clad GH-502 16.5cm
Sold out
Santoku Couteau de cuisine Gihei Hamono Aogami 2 Iron clad 16.5cm GH-502
Japanese kitchen knife santoku by Gihei Hamono. Blade is made of Aogami 2 steel with iron clad. Aogami #2 by Hitachi sometimes called Blue Paper #2 since the steel is wrapped in blue paper. It has a very good edge sharpness and excellent edge retention. This Gihei Hamono santoku has a handle of baked magnolia. Never wash any Japanese knife in a dishwasher. This knife has a thin blade and should not be used on hard items such as bones or frozen foods.
120,97 €

Sold out

Gyuto Couteau Japonais Gihei Hamono Aogami 2 GH-404 21cm
Sold out
Gyuto Couteau de cuisine Gihei Hamono Aogami 2 21cm GH-404
Japanese chef knife gyuto by Gihei Hamono. Blade 21 cm is made of Aogami 2 steel. Aogami #2 by Hitachi sometimes called Blue Paper #2 since the steel is wrapped in blue paper. It has a very good edge sharpness and excellent edge retention. This Gihei Hamono gyuto knife has a handle of baked magnolia. Never wash any Japanese knife in a dishwasher. This knife has a thin blade and should not be used on hard items such as bones or frozen foods.
209,68 €

Sold out

Santoku Couteau Japonais Gihei Hamono SLD GH-302 16.5cm
Sold out
Santoku Couteau de cuisine Gihei Hamono SLD 16.5cm GH-302
Japanese kitchen knife santoku by Gihei Hamono. The Santoku is the Japanese version of the chef's knife. Blade is made of SLD steel.  SLD stainless steel was originally designed by Hitachi for cutting other steels. It holds an edge as long as a carbon steel, but is much easier to care for. The base of the steel is SKD11 with hardness up to 61-63HRC. This Gihei Hamono santoku has a handle of magnolia. Never wash any Japanese knife in a dishwasher. This knife has a thin blade and should not be used on hard items such as bones or frozen foods.
128,23 €

Sold out

Gyuto Couteau Japonais Ryusen Hamono PV101 24cm
Sold out
Gyuto Couteau de cuisine Ryusen Hamono 24cm PV101
High quality chef knife Ryusen Hamono Prever with 24 cm blade. The Prever series has a core of VG-10, between 62 layers of stainless steel. The blade is thin and the knife is light in weight. This Ryusen Hamono Prever Chef knife has a handle of walnut. The combination of weight, balance, extremely thin and sharp cutting edge provide a huge comfort during the cut. The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Prever Chef knife goes in black gift box.
321,77 €

Sold out

Gyuto Couteau Japonais Ryusen Hamono Tanganryu TG-502 21cm
Sold out
Gyuto Couteau de cuisine Ryusen Hamono Tanganryu 21cm TG-502
Winner of the 2016 Good Design Award, the Tanganryu series are for both professional chef and home cook, top line of Ryusen Hamono, having feature of hammered patterns.  The mirror polished "Tsuchime" patterns are contrasted with the blasted Damascus patterns. The beautiful combination of whole hammered and layered pattern blade will make you enjoy cooking much more even by looking.  The core of blade is Cobalt VG-10 steel and 32-layered by stainless steel. Therefore the blade is super hard yet hard to get rust and the cutting edge is amazingly fine.
The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge.  The handle is longer than the standard one, and is developed so that you can safely do fine slicing by holding it at the end closest to you, and you can also use it to chop by holding it in the middle.
274,18 €

Sold out

Sujihiki Couteau Japonais Ittetsu Shirogami IW-11812 24cm
Sold out
Sujihiki Couteau de cuisine Ittetsu Shirogami 24cm IW-11812
Sujihiki Ittetsu kitchen knife with 240 mm blade is a double edge slicing knife with a long narrow blade that smoothly slices through meat or vegetables and preserves the integrity of each ingredient's freshness. This Ittetsu sujihiki is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
152,42 €

Sold out

Gyuto Couteau Japonais Teruyasu Fujiwara TF2308 21cm
Sold out
Gyuto Couteau de cuisine Teruyasu Fujiwara 21cm TF2308
Japanese chef knife gyuto with 210 mm blade. Handmade by mr. Teruyasu Fujiwara.  The Gyuto is the Japanese version of the classic Western Chef's knife. The difference is that the gyuto's blade is thinner and holds a sharper edge.  Blade is made of Shirogami 1 stell with stainless steel clad. Handle: pakka wood. Hand wash with warm water and towel dry. 
321,77 €

Sold out

Couteau Japonais Yu Kurosaki Petty ZVD-150PE 15cm
Sold out
Couteau de cuisine Yu Kurosaki Petty 15cm ZVD-150PE
Yu Kurosaki Petty knife, 15 cm. Yu Kurosaki Fujin series fearture Nickel Damascus-patterned blades with a core of VG-10 stainless steel for professional with a hardness of 60-61 HRC, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Fujin VG10 Damascus Series Petty knife is made of Octagonal-shaped wood. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
189,52 €

Sold out

Couteau Japonais Seki Kanetsugu Pro J Petty 6002 15cm
Sold out
Couteau de cuisine Seki Kanetsugu Pro J Petty 15cm 6002
Petty knife with 15 cm blade from Seki Kanetsugu Pro J series. After yers of research for the ultimate performance kitchen knives in functional materials and design, Mr. Kawamura of Kanetsugu has released the innovative line of Pro J Series.Hammer Forged Tsuchime Blade has cladding blade construction. Blade core is made of special high grade Cobalt steel called ZA-18 from Aichi Steel Company, sandwiched with AUS-2 stainless steel. This is the first kitchen knife to use this new formula steel of ZA-18.Mr. Kawamura explains Aichi Steel Ccompany has recently developed this ZA-18 to compete or even outperform VG-10. It is heat treated and then ice hardened (Sub-Zero quench) to the Rockwell hardness of HRc. 60-61. The Chemical Composition of ZA-18 is similar to the VG-10, but contains higher Carbon (1.20 vs. 1.05), Chromium (18.0 vs. 15.5), Molybdenum (1.50 vs. 1.20) and Cobalt (1.80 vs. 1.5) for added hardness, durability and rust-resistance. In fact, before Mr. Kawamura decides to use this steel for Pro J Series, he has tested it many times and proved it's incredible cutting performance and potential. Japanese technology of the cladding blade construction also has many advantages in the durability and maintenance, because the AUS-2 outer steel protects the core steel, and makes the blade extra strong to bending and breaking for the different hardness steel layers.The handle is made of Black-Pakkawood handle, comes with nice accent of red color micro fiber spacer and stainless steel bolster. It is ergonomically designed with slightly slanted bolster forge welded into the tang and full tang hand rounded handle slab to fit with your hand.
68,55 €

Sold out

Gyuto Couteau Japonais Yoshimi Kato Black Nickel VG-10 D-1906 24cm
Sold out
Gyuto Couteau de cuisine Yoshimi Kato Black Nickel VG-10 24cm D-1906
Couteau de chef japonais gyuto forgé à la main par Yoshimi Kato, artisan traditionnel certifié à Takefu, préfecture de Fukui au Japon. Lame VG - 10 Nickel Damas. Longueur de la lame 240 mm. Manche-palissandre. N'essayez pas de couper, de frapper ou de hacher des produits congelés ou des os. La lame peut s'écailler ou se casser. Laver à la main à l'eau tiède et sécher avec une serviette.
258,06 €

Sold out

Gyuto Japanese kitchen knife Seki Kanetsugu 9006 23cm - 1
Sold out
Gyuto Couteau de cuisine Seki Kanetsugu Saiun 23cm 9006
Famous Cobalt VG-10 Steel core forge-layered with Damascus Stainless steel blade. (Total 33 layers, HRC60 to 61). Beautiful Damascus pattern blade enhanced with elegant wood-grain and round shaped Black Linen Micarta Handle, This is a very durable and shrinkage proof Micarta material imported from Spain.
150,81 €

Sold out

Gyuto Couteau Japonais Yu Kurosaki Fujin VG10 Damascus Keyaki ZVD-180CH 18cm
Sold out
Gyuto Couteau de cuisine Yu Kurosaki Fujin VG10 Damascus Keyaki 18cm ZVD-180CH
Yu Kurosaki Chef knife, 18 cm. Yu Kurosaki Fujin series fearture Nickel Damascus-patterned blades with a core of VG-10 stainless steel for professional with a hardness of 60-61 HRC, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Chef knife Fujin VG10 Damascus Series is made of Octagonal-shaped keyaki wood. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
237,90 €

Sold out

Finnish knife Marttiini Bronze Bird Damascus in gift box 557012W 10cm - 1
Sold out
Couteau à lame fix Marttiini Bronze Bird Damascus in gift box 10cm 557012W
Marttiini Bronze Bird Damascus knife combining the classic Marttiini Bronze Bird decorated handle with the beautifully patterned Damascus steel blade. Marttiini Bronze Bird Damascus – a knife that’s an extremely sharp, perfectly functioning tool as well as a collector’s dream. Heat treated curly birch handle. These knives are individually numbered and delivered in wooden gift boxes.
320,97 €

Sold out

Couteau pliant Mcusta Shinra Mixture Ripple MC-0141G 7.1cm
Sold out
Couteau pliant Mcusta Shinra Mixture Ripple 7.1cm MC-0141G
The Mcusta Shinra Mixture Ripple MC-0141G folder is a stylish Japanese gentleman's knife.The handle is made from ironwood. This knife is enhanced with a remarkable blade with a core made from SPG2-powdered steel. An extremely hard type of steel that retains its sharpness for a long time. The core is laminated in between three layers of softer steel. Includes a belt sheath. Weight 93 g.
229,84 €

Sold out

Santoku Couteau Japonais Yoshimi Kato Ginsan D-702CW 17cm
Sold out
Santoku Couteau de cuisine Yoshimi Kato Ginsan 17cm D-702CW
Couteau Santoku avec lame ginsan satinée fabriquée par Yoshimi Kato. Yoshimi Kato utilise l'acier Ginsan, ou Argent-3, comme élément principal de cette gamme de lames. L'acier G3 est bien connu pour ses excellentes propriétés de bord. Longueur de la lame 170 mm. Manche-cerisier. Pour santoku Yoshimi Kato Ginsan, il est recommandé de laver à la main à l'eau tiède et de sécher avec une serviette. Évitez les os, les aliments surgelés, les noix et les bonbons durs ou tout autre aliment que les fruits, les légumes et les protéines.
197,58 €

Sold out

Petty Couteau Japonais Makoto Kurosaki Petty STYLK-201 13.5cm
Sold out
Petty Couteau de cuisine Makoto Kurosaki Petty 13.5cm STYLK-201
Japanese petty knife handmade by Makoto Kurosaki. 135 mm SPG2 blade with stainless steel clad. Handle: cherrywood. Handwash in warm water and towel dry. Do not cut frozen foods. Makoto Kurosaki is an exceptionally talented blacksmith working in Takefu Knife Village.
137,10 €

Sold out

copy of Yanagiba Japanese kitchen knife Tojiro MV F-1057 24cm - 1
Sold out
Yanagiba Couteau de cuisine Tojiro MV 27cm F-1058
Tojiro MV Resin Collar Yanagi-Sashimi with 270mm blade. Blade made from wear and rust resistant Molybdenum Vanadium steel. So that its maintenance is easier than carbon steel knives and therefore suitable for beginners. However, edge is carefully sharpened without compromise by our craftsman. Handle is made from magnolia and has good water resistance. Weight of Tojiro MV Yanagiba F-1058 knife is 145 g. Like other traditional Japanese knife blades, this knife has a bevel on only one side of the blade, to help achieve even slices.
109,68 €

Sold out