Filtrer
Prix
Fabricants
Longueur des cordes, mm
Taille
Sex
Pays
Acier
Poignée
Série
Dureté
Etui
Verrouillage
Matériel
Filtrer
Sujihiki Couteau de cuisine Ittetsu 27cm IS-46
Ittetsu Sujihiki knife with 27 cm blade. Blade is made of SLD steel by Hitachi. SLD is a cold work die steel with high abrasion resistance for general use, excellent harden-ability and minimal quench stress. Handle: ashtree / quince. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
200,81 €

En stock

Couteau de cuisine Dragon by Apogee Storm 14cm 0550
Dragon Storm Fillet knife has a narrow design perfect for both detail deboning, and trimming of meat. The thin blade and curved tip make cutting through meat fast and easy. The blade is made from Apogee's acid etched American BD1N stainless steel and is sharp and durable. The black G10 handles are grippy even when wet and thanks to the center rivet design, gorgeous to look at. Overall length 10.47". Blade length 5.5". Weight 5.2 oz. Recommended hand-washed.
Winner of the Kitchen Knife of the Year at 2019's BLADE Show, the Dragon Storm series of knives is a cut above the rest. 
104,84 €

En stock

Couteau pliant Spyderco Custom Delica Yellowhorse Salmon 7.4cm CH892
Spyderco Custom Delica Salmon limited edition folder, customized by Brian Yellowhorse. 4 1/8" closed. Overall Length 7.125". The knife has a satin finish VG-10 steel standard edge blade 2.875" with thumb hole pull. Stainless frame and pocket clip. Backlock. Front handle onlay constructed of various stones. Cardboard gift box.
306,77 €

En stock

Couteau pliant Spyderco Custom Delica Yellowhorse Buffalo 7.4cm CH729
Spyderco Delica Buffalo folder customized by Brian Yellowhorse. Limited edition. 4 1/8" closed. Overall Length 7.125". The knife has a satin finish VG-10 steel standard edge blade 2.875" with thumb hole pull. Stainless frame and pocket clip. Backlock. Front handle onlay constructed of various stones with nickel silver inlay and fileworked border. Japanese made model. Cardboard gift box.
306,77 €

En stock

Santoku Couteau de cuisine Miyabi 5000MCD 18cm 34374-181-0
Zwilling Miyabi 5000MCD Santoku 18 cm. MIYABI knives epitomise the beauty of sharpness. The typical Japanese blade design and the outstanding sharpness of the MIYABI 5000MCD series turn these knives into precision instruments that leave nothing to be desired. They are perfect in function and ergonomics and the design is unique. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Manufactured by ZWILLING J.A. HENCKELS in its own factory in Seki, the traditional heart of the Japanese knife and sword industry, MIYABI knives unite German state-of-the-art technology with the knowledge of the old master craftsmen. It is therefore no coincidence that the unique Katana edge is reminiscent of the legendary Japanese swords. There are only best kitchen knives in MyGoodKnife’s range.
345,97 €

En stock

Gyuto Couteau de cuisine Miyabi 6000MCT Artisan Gyutoh 20cm 34073-201-0
Measuring 20 cm in length, the GYUTOH knife is suitable for cutting and separating fish and meat. Its pointed tip and sturdy blade enable clean cuts to be made. The handle’s flat finishing ensures safety by preventing your hand from slipping from the handle onto the blade. Miyabi also uses a Japanese blade profile, meaning that the GYUTOH combines high-cutting quality properties with comfort.
The blade is made of a micro-carbide powder steel core wrapped in two additional layers of steel. The blade is hammer-forged, giving it an appearance slightly reminiscent of the Tschumine design. In addition, each blade of the MIYABI 600MCT series is put through different ice-hardening processes which must be completed at -196°C, so that a final hardness of around 63 Rockwell is achieved.
The blade is polished on both sides and finished by hand using Honbazuke honing. The handle on the other hand is made out of pakka wood, which has a subtle pattern and stands out thanks to its sturdiness and flexibility. The perfect balance enables a high level of comfort and lets you work without tiring, thus making the knife from Miyabi a useful cutting utensil in your kitchen.
- Blade core made of MicroCarbide MC63 powder steel embedded in 2 layers of steel. This provides a hardness of approx. 63 Rockwell. (International standard unit of measurement for hardness); - CRYODUR® ice-hardened blades provide particularly good cutting edge retention, corrosion resistance and optimum blade flexibility. - Authentic Japanese blade profile with Tsuchime look (hammered finish). - The symmetrical blade with ultra-sharp Honbazuke edge ensures incredible sharpness. - Dimensionally-stable pakka wood handle for perfect balance, outstanding comfort and fatigue-free cutting with all cutting techniques; sophisticated dark wood look.
237,90 €

Expédition après 10-20 jours ouvrables

Couteau pliant Spyderco Custom Delica Yellowhorse Salmon 7.4cm CH731
Spyderco Delica Salmon folder customized by Brian Yellowhorse. Limited edition. 4 1/8" closed. Overall Length 7.125". The knife has a satin finish VG-10 steel standard edge blade 2.875" with thumb hole pull. Stainless frame and pocket clip. Backlock. Front handle onlay constructed of various stones. Cardboard gift box.
306,77 €

En stock

Nakiri Couteau de cuisine Kajibe 16.5cm KJB-002
Kajibe nakiri knife with blade length 165 mm. Nakiri's flat blade is meant for the push/pull chopping of vegetables. Handle is made of chestnut. Blade of this Kajibe nakiri knife is made of Aogami #2 iron clad steel. Weight is 190 g. Kajibe knives are hand-forged by master blacksmith Kunio Ishikawa and his son. This nakiri knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
141,13 €

En stock

Sujihiki Couteau de cuisine Seki Kanetsugu Pro J 21cm 6009
Couteau à trancher japonais Sujihiki avec lame de 21 cm de la série Pro J de Seki Kanetsugu. Le Sujihiki est un couteau à trancher à double tranchant doté d'une lame longue et étroite qui tranche délicatement la viande ou les légumes tout en préservant la fraîcheur de chaque ingrédient. Après des années de recherche pour des couteaux de cuisine ultra-performants, alliant matériaux fonctionnels et design, M. Kawamura de Kanetsugu a lancé la gamme innovante de la série Pro J.
La lame Tsuchime forgée au marteau est dotée d'une construction gainée. Le cœur de la lame est en acier au cobalt spécial de haute qualité, le ZA-18 d'Aichi Steel Company, intercalé avec de l'acier inoxydable AUS-2. Il s'agit du premier couteau de cuisine à utiliser cette nouvelle formule d'acier ZA-18.
M. Kawamura explique qu'Aichi Steel Company a récemment développé ce ZA-18 pour concurrencer, voire surpasser, le VG-10. Il est traité thermiquement puis trempé à froid (trempe à froid) pour atteindre une dureté Rockwell de HRc 60-61. La composition chimique du ZA-18 est similaire à celle du VG-10, mais contient des teneurs plus élevées en carbone (1,20 contre 1,05), chrome (18,0 contre 15,5), molybdène (1,50 contre 1,20) et cobalt (1,80 contre 1,5) pour une dureté, une durabilité et une résistance à la rouille accrues. Avant d'utiliser cet acier pour la série Pro J, M. Kawamura l'a testé à de nombreuses reprises et a démontré son incroyable performance de coupe et son potentiel. La technologie japonaise de fabrication de la lame gainée offre également de nombreux avantages en termes de durabilité et d'entretien, car l'acier extérieur AUS-2 protège l'acier central et confère à la lame une résistance accrue à la flexion et à la rupture malgré les différentes couches d'acier de dureté.
Le manche est en bois de pakka noir, avec une entretoise en microfibre rouge et une mitre en acier inoxydable. Il est conçu de manière ergonomique avec un traversin légèrement incliné soudé dans la soie et une plaque de poignée arrondie à la main pour s'adapter à votre main.
104,03 €

En stock

Paring Couteau de cuisine Miyabi Shotoh MIZU 9cm 32910-091-0
The Shotoh from Miyabi is designed for the slicing, cutting and peeling of fruit and vegetables. Preparing cold platters or delicious curries containing lots of vegetables are easy with this knife. This series MIZU 5000MCT has a core of MC 63, microcarbide powder steel (63 HRC) covered with 2 layers of ice- hardened Cryodur stainless steel. Cutting edge has an angle of 19°. Hammered finish (Tsuchime) which prevents food from sticking to the blade and ergonomic handle of micarta. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Made in Seki, Japan. 
184,29 €

En stock

Couteau de cuisine Miyabi 5000FCD RAW Gyutoh 20cm 34681-201-0
The gyutoh, or chef’s knife, is a general purpose knife for the preparation of larger cuts of meat and vegetables. It has a fine carbide steel core which gives the knife very good initial sharpness and cutting edge retention. The core is embedded in 48 layers of steel which create each knife’s unique Damascus-design. The symmetrical cutting edge is Honbazuke honed. This three-stage grinding, sharpening and polishing process gives the knife razor-like sharpness. The entire length of the edge can be used to cut as there is no finger guard. The join between handle and bolster is completely smooth, which helps to prevent calluses forming on the thumb and forefinger and gives a comfortable grip. Hand wash only for best care and avoid cutting on glass, ceramic or stone boards as these will prematurely dull the edge. Maintain and sharpen using whetstones. - FC61 fine carbide steel blade core; - 48 layers of steel surrounding the core create the Damascus-design; - FRIODUR ice-hardened for extreme hardness; - Rockwell hardness of approximately 61; - Symmetrical cutting edge; - Pakka wood handle; - Steel mosaic pin and handle end cap; - Made in Japan.
200,81 €

Expédition après 10-20 jours ouvrables

Paring Couteau de cuisine Miyabi 5000FCD RAW Shotoh 9cm 34680-091-0
Zwilling Miyabi 5000FCD Shotoh paring knife 9 cm is ideal for cutting, cleaning and peeling fruit and vegetables. Shotoh has a hard fine carbide steel core which gives very good cutting edge retention and sharpness. The FC61 steel core of the blade is embedded in 48 outer layers of Damascus-design steel, giving each knife its unique pattern. The cutting edge is symmetrical (not single bevel) so it’s suitable for both right and left-handed use. The edge is Honbazuke-honed – a three-stage grinding, sharpening and polishing process resulting in razor-like sharpness. There is no finger guard so the whole length of the cutting edge can be used. The pakka wood handle seamlessly joins the half-bolster. The smooth join helps to prevent calluses forming on the thumb and forefinger. For best care, it’s recommended to hand wash only. Maintain and sharpen on a whetstone, and using glass, ceramic or stone cutting boards should be avoided as this can prematurely dull the cutting edge. Zwilling Miyabi 5000FCD shotoh paring knife made in Japan.
120,16 €

Expédition après 10-20 jours ouvrables

Couteau de cuisine Ittetsu Honesuki 15cm IS-47
Ittetsu Honesuki knife with 15 cm blade. Honesuki is specifically designed for de-boning and breaking down poultry, but is also capable of filleting fish or meat and carrying out many tasks. Blade is made of SLD steel by Hitachi. SLD is a cold work die steel with high abrasion resistance for general use, excellent harden-ability and minimal quench stress. Handle: ashtree / quince. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
141,13 €

En stock

Gyuto Couteau de cuisine Seki Kanetsugu 27cm 7007
The blade is made of Molybdenum alloy high carbon stainless steel with traditional"Hamaguri ba" (Convex edge grind), the edge that made Japanese swords famous, for an outstanding sharpness and durability,and yet easy to resharpen. It is heat treated and then Sub Zero quenched. which refrigerates the blade to 70 degrees for longer edge retention and strength to brittleness and chipping.pro m handle1.jpg Since introducing the Kanetsugu Pro M series two years ago, Seki Kanetsugu has received a positive reputation for their unique Round Shape of Black Pakka wood handle for comfortable grip, well balanced and practical shape. You might have not been familiar with this shape of the handle and the blade edge (Convex edge). Mr. Kawamura (President of Kanetsugu company) has spent numerous times to research and study to produce the best performance chef knives. Recomeneded for both - Home Chefs to Pro Chefs who demand extra sharpness and cutting performance for the sophisticated cooking life.
80,24 €

En stock

Yanagiba Couteau de cuisine Sukenari 2 layers VG10 27cm S-1012
Sukenari Yanagiba knife. Blade length is 270 mm. Traditional Japanese octagonal magnolia handle. Blade of this Sukenari knife is made of VG10 steel (3 layers). This Sukenari yanagiba japanese knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
321,77 €

En stock

Couteau de cuisine Seki Kanetsugu Nami Wine 10cm 92011
Seki Kanetsugu Nami Steak knife Wine colour. Steak knife Nami is made of coreless Damascus (laminated material of VG2 and VG10), blending high-tech with swordsmith tradition, the highest quality comfort was born. Seki Kanetsugu uses  “ocean wave” motif which came from a traditional Japanese painting. The founder Kanetsugu began to make the Japanese swards in the 14th century at Mino. Now Seki Kanetsugu incorporates "Hamaguriha" which is the sectional shape of Japanese sword into kitchen knife, making knife that lasts sharpness. Seki Kanetsugu Nami Steak knives are not allowed to wash in dishwasher.
120,16 €

En stock

Aoyoshi Vintage Pasta set Dublin for 2 201 1547
Amazing Aoyoshi Vintage Pasta set Dublin for 2. Size W296× D245× H44mm. Includes 2 plates and 2 forks. Aoyoshi processed the stainless steel surface like the damage processing of the jeans, and put out a worn-out texture. As a texture of vintage, there are irregularities and scratches on the surface.
47,58 €

En stock

Santoku Couteau de cuisine Yu Kurosaki Shizuku R2 Keyaki 16.5cm ZR-165SA
Couteau Santoku Yu Kurosaki avec lame de 165 mm. Cette série Yu Kurosaki est dotée de lames au fini tsuchime R2. Ce santoku R2 fait à la main a un niveau incroyable de finition et de polissage, avec les motifs Tsuchime "Shizuku" emblématiques de Kurosaki qui sont à la fois esthétiques et fonctionnels. La poignée octogonale est en bois keyaki. Laver et sécher avec une éponge douce et ranger en toute sécurité après utilisation. Évitez de couper dans les os, les aliments surgelés, les noyaux de fruits durs. Surface de coupe recommandée: le bois, les planches caoutchoutées et les composites haut de gamme, ainsi que les plastiques de qualité tels que le polyéthylène constituent des surfaces de coupe acceptables et aideront à protéger et à prolonger le tranchant du couteau. Évitez le verre, le métal, les comptoirs et autres surfaces rigides qui ne pardonnent pas. Yu Kurosaki travaille dans le village de couteaux de Takefu.
282,26 €

En stock

Couteau de cuisine Takeshi Saji Bunka VG10, bull bone 17cm HA4606
Japanese kitchen knife bunka handmade by Mr. Takeshi Saji. Blade - 31 layers damaskus steel, VG10. Blade length 17 cm. Handle - bull bone. Brass bolster. Weight of Bunka Takeshi Saji is 320 g.Takeshi Saji is a Chairman of Saji Balacksmith (Japan). Member of Japan Knife Guild and Japan Custom Knife Makers. In 1992, he was officially certified as Dentoukougeishi, a “Traditional Master Craftsman” by the Japanese “Ministry of International Trade & Industry”.
306,45 €

En stock

Yanagiba Couteau de cuisine Tojiro MV 24cm F-1057
Tojiro MV Yanagiba Sashimi knife F-1057 with 240mm blade. Blade made from wear and rust resistant Molybdenum Vanadium steel. So that its maintenance is easier than carbon steel knives and therefore suitable for beginners. However, edge is carefully sharpened without compromise by our craftsman. Handle is made from magnolia and has good water resistance. Weight of Tojiro MV Yanagiba F-1057 knife is 120 g. Like other traditional Japanese knife blades, this knife has a bevel on only one side of the blade, to help achieve even slices.
89,52 €

En stock

Sujihiki Couteau de cuisine Tojiro Zen Black 21cm FD-1569
Tojiro Zen Black sujihiki slicing knife with 210 mm blade. VG10 as core steel, clad by 13-chrome stainless steel, it has achieved both professional sharpness and easy maintenance. Black oxide processing, which is the technology often used for medical equipment, has been applied on blade. The blade thus has both outstanding corrosion resistance and beautiful visual aspect. Tojiro Zen Black Slicer FD-1569 weights 110 g. Chestnut handle has excellent durability, and additionally applied fire treatment on surface makes it even stronger. Tojiro Zen Black Slicer FD-1569 is not allowed to wash by dishwasher. It has very hard, but thin blade and not allowed to cut bones and meat with bones, coconuts and other nuts, other hard products.
111,29 €

En stock

Nakiri Couteau de cuisine Tojiro Zen Black 16.5cm FD-1568
Tojiro Zen Black Nakiri with 165 mm blade. Nakiri is japanese vegetable knife. VG10 as core steel, clad by 13-chrome stainless steel, it has achieved both professional sharpness and easy maintenance. Black oxide processing, which is the technology often used for medical equipment, has been applied on blade. The blade thus has both outstanding corrosion resistance and beautiful visual aspect. Tojiro Zen Black Nakiri FD-1568 weights 145 g. Chestnut handle has excellent durability, and additionally applied fire treatment on surface makes it even stronger. Tojiro Zen Black Nakiri FD-1568 knife is not allowed to wash by dishwasher. It has very hard, but thin blade and not allowed to cut bones and meat with bones, coconuts and other nuts, other hard products.
108,87 €

En stock

Gyuto Couteau de cuisine Tojiro Zen Black 24cm FD-1565
Tojiro Zen Black Chef knife with 24 cm blade. VG10 as core steel, clad by 13-chrome stainless steel, it has achieved both professional sharpness and easy maintenance. Black oxide processing, which is the technology often used for medical equipment, has been applied on blade. The blade thus has both outstanding corrosion resistance and beautiful visual aspect. Tojiro Zen Black Chef knife FD-1565 weights 170g. Chestnut handle has excellent durability, and additionally applied fire treatment on surface makes it even stronger. Tojiro Zen Black Chef knife FD-1565 is not allowed to wash by dishwasher. It has very hard, but thin blade and not allowed to cut bones and meat with bones, coconuts and other nuts, other hard products.
152,42 €

En stock