Couteaux Damas

Japanese chef knife hand forged by Yoshimi Kato who is a certified traditional craftsman in Takefu, Fukui prefecture in Japan. Blade VG-10 Nickel Damascus, 65 layers with VG-10 core. Blade length 210 mm. Handle - red pakkawood. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.

Unique gyuto Ryusen Hamono, collection Houenryu. Blade length is 21 cm. Coreless blade of this amazing japanese chef knife is made of VG10 and VG2 steels, 70 layers. Japanese white birch and resin handle. The Rockwell hardness on this knife is about 62 HRC. Ryusen Hamono Houenryu Gyuto knife goes in black gift box. Only handwash allowed. 

Exclusive chef knife Ryusen Hamono, collection Houenryu. Blade length is 24 cm. Coreless blade is made of VG10 and VG2 steels, 70 layers. Japanese white birch and resin handle. The Rockwell hardness on this knife is about 62 HRC. Ryusen Hamono Houenryu Gyuto knife goes in black gift box. Only handwash allowed. 

Petit couteau japonais forgé à la main par Yoshimi Kato, artisan traditionnel certifié à Takefu, préfecture de Fukui au Japon. La lame est fabriquée à partir de damas de nickel VG-10, 65 couches avec noyau VG-10. Longueur de la lame 120mm. Manche-bois. N'essayez pas de couper, de frapper ou de hacher des produits congelés ou des os. La lame peut s'écailler ou se casser. Laver à la main à l'eau tiède et sécher avec une serviette.

Japanese kiritsuke knife handmade by Tsutomu Kajiwara. Blade 24 cm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.

 Japanese Petty knife handmade by Tsutomu Kajiwara. "Petty" is the Japanese word for a paring or utility knife, it comes from the French word “petite”. Blade 150 mm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.

 Petty knife handmade by Tsutomu Kajiwara. Blade 120 mm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Weight about 95g. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.

Handmade japanese kitchen Petty knife by Tsutomu Kajiwara. Blade 90 mm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Weight 80 g.
Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.

New! Tojiro GAI Gyuto chef´s knife with 180 mm blade. New Tojiro GAI series is suitable for both professional and home use. Not only practical, it is design wise superior and unique. VG-10 premium Japanese knife steel is in the core, which forged by 37 layers low and high carbon stainless steel. The handle with uniquely designed rugged surface fixed by hex bolts. It is one of a kind. Series name “GAI” came from a Japanese word "armor", which is inspired by the handle. Weight of Tojiro GAI Gyuto F-1352 is 170 g.
Please, use your Tojiro knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.

New! Tojiro GAI Petty kitchen knife with 135 mm blade. New Tojiro GAI series is suitable for both professional and home use. Not only practical, it is design wise superior and unique. VG-10 premium Japanese knife steel is in the core, which forged by 37 layers low and high carbon stainless steel. The handle with uniquely designed rugged surface fixed by hex bolts. It is one of a kind. Series name “GAI” came from a Japanese word "armor", which is inspired by the handle. Weight of Tojiro GAI Petty F-1353 is 85 g.
Please, use your Tojiro knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.

Sujihiki knife Ryusen Hamono Bonten Unryu Wa with 27 cm blade. The Sujihiki is a double edge slicing knife with a long narrow blade that smoothly slices through meat or vegetables. The Bonten Unryu is one of the signature lines by Ryusen. It is considered as one of the best VG10 line by any Japanese maker, because of its unmatched artistics and more importantly, their VG10 blades are hande forged one-by-one. The blade of the Unryu wa series, is constructed identical as the western handle Unryu series. It has a core of VG-10, with 63 layers of stainless damascus steel. The blade is relatively thin, with a medium / light weight, but not as thin as a laser. Due to the classic Japanese perfectly shaped octagonal handle, it is easy to control and effortlessly will do exactly what it is made for cutting perfectly. The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Gyuto  knife goes in black gift box.

Japanese chef knife Ryusen Hamono Bonten Unryu Wa with 18 cm blade. The Bonten Unryu is one of the signature lines by Ryusen. It is considered as one of the best VG10 line by any Japanese maker, because of its unmatched artistics and more importantly, their VG10 blades are hande forged one-by-one. The blade of the Unryu wa series, is constructed identical as the western handle Unryu series.It has a core of VG-10, with 63 layers of stainless damascus steel. The blade is relatively thin, with a medium / light weight, but not as thin as a laser. Due to the classic Japanese perfectly shaped octagonal handle, it is easy to control and effortlessly will do exactly what it is made for cutting perfectly. The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Gyuto  knife goes in black gift box.

High quality chef knife Ryusen Hamono Prever with 24 cm blade. The Prever series has a core of VG-10, between 62 layers of stainless steel. The blade is thin and the knife is light in weight. This Ryusen Hamono Prever Chef knife has a handle of walnut. The combination of weight, balance, extremely thin and sharp cutting edge provide a huge comfort during the cut. The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Prever Chef knife goes in black gift box.

Chef knife Ryusen Hamono Tanganryu with 24 cm blade. Winner of the 2016 Good Design Award, the Tanganryu series are for both professional chef and home cook, top line of Ryusen Hamono, having feature of hammered patterns.  The mirror polished "Tsuchime" patterns are contrasted with the blasted Damascus patterns. The beautiful combination of whole hammered and layered pattern blade will make you enjoy cooking much more even by looking.  The core of blade is Cobalt VG-10 steel and 32-layered by stainless steel. Therefore the blade is super hard yet hard to get rust and the cutting edge is amazingly fine. The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge.  The handle is longer than the standard one, and is developed so that you can safely do fine slicing by holding it at the end closest to you, and you can also use it to chop by holding it in the middle.

Winner of the 2016 Good Design Award, the Tanganryu series are for both professional chef and home cook, top line of Ryusen Hamono, having feature of hammered patterns.  The mirror polished "Tsuchime" patterns are contrasted with the blasted Damascus patterns. The beautiful combination of whole hammered and layered pattern blade will make you enjoy cooking much more even by looking.  The core of blade is Cobalt VG-10 steel and 32-layered by stainless steel. Therefore the blade is super hard yet hard to get rust and the cutting edge is amazingly fine.
The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge.  The handle is longer than the standard one, and is developed so that you can safely do fine slicing by holding it at the end closest to you, and you can also use it to chop by holding it in the middle.

High quality Santoku Ryusen Hamono Prever. The Prever series has a core of VG-10, between 62 layers of stainless steel. The blade is thin and the knife is light in weight. This Ryusen Hamono Prever Santoku has a handle of walnut. The combination of weight, balance, extremely thin and sharp cutting edge provide a huge comfort during the cut.
The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Prever Santoku goes in black gift box.

High quality nakiri japanese kitchen knife Ryusen Hamono Prever. The Prever series has a core of VG-10, between 62 layers of stainless steel. The blade is thin and the knife is light in weight. This Ryusen Hamono Prever Nakiri has a handle of walnut. The combination of weight, balance, extremely thin and sharp cutting edge provide a huge comfort during the cut. The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Prever Nakiri knife goes in black gift box.

High quality chef knife Ryusen Hamono Prever. The Prever series has a core of VG-10, between 62 layers of stainless steel. The blade is thin and the knife is light in weight. This Ryusen Hamono Prever Chef knife has a handle of walnut. The combination of weight, balance, extremely thin and sharp cutting edge provide a huge comfort during the cut. The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Prever Chef knife goes in black gift box.

Handmade Japanese gyuto chef knife by Mr. Takeshi Saji. Blade is damascus steel with SG2 cord. Blade length 21 cm. Handle - iron wood. Avoid bones, frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins.
Takeshi Saji is a Chairman of Saji Balacksmith (Japan). Member of Japan Knife Guild and Japan Custom Knife Makers. In 1992, he was officially certified as Dentoukougeishi, a “Traditional Master Craftsman” by the Japanese “Ministry of International Trade & Industry”.

Handmade Japanese santoku kitchen knife by Mr. Takeshi Saji. Blade is damascus steel with SG2 cord. Blade length 18 cm. Rose Wood handle. Layered polywood ferrule. Avoid bones, frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins.
Takeshi Saji is a Chairman of Saji Balacksmith (Japan). Member of Japan Knife Guild and Japan Custom Knife Makers. In 1992, he was officially certified as Dentoukougeishi, a “Traditional Master Craftsman” by the Japanese “Ministry of International Trade & Industry”.

Yu Kurosaki Petty knife, 15 cm. Yu Kurosaki Fujin series fearture Nickel Damascus-patterned blades with a core of VG-10 stainless steel for professional with a hardness of 60-61 HRC, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Fujin VG10 Damascus Series Petty knife is made of Octagonal-shaped wood. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.

Zwilling Miyabi 5000MCD Santoku 18 cm. MIYABI knives epitomise the beauty of sharpness. The typical Japanese blade design and the outstanding sharpness of the MIYABI 5000MCD series turn these knives into precision instruments that leave nothing to be desired. They are perfect in function and ergonomics and the design is unique. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Manufactured by ZWILLING J.A. HENCKELS in its own factory in Seki, the traditional heart of the Japanese knife and sword industry, MIYABI knives unite German state-of-the-art technology with the knowledge of the old master craftsmen. It is therefore no coincidence that the unique Katana edge is reminiscent of the legendary Japanese swords. There are only best kitchen knives in MyGoodKnife’s range.

Japanese chef knife gyuto hand forged by Yoshimi Kato who is a certified traditional craftsman in Takefu, Fukui prefecture in Japan. Blade VG-10 Nickel Damascus. Blade length 240 mm. Handle - rosewood. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.

Seki Kanetsugu Zuiun Santoku 18 cm. The Zuiun is a special model manufactured to celebrate the company's centennial. Seki Kanetsugu Zuiun knives have blades with a wavy “hamon” pattern similar to Japanese swords. In its current incarnation, Seki Kanetsugu Cutlery has been making modern blades that realize the characteristics of Japanese swords--unbreakable, unbending and very sharp. The company also infused the Zuiun with the spirit of such swords. The blade is made of Damascus steel that uses powdered stainless steel SPG2 for the core material. Finely sharpened by artisans, the surface of the blade features a scudding cloud-like pattern. It is also forged into a V-shaped "hamaguri-ba" clam blade, reflecting a characteristic of Japanese swords.