Filtra per
Prezzo
€ €
Produttori
Lunghezza lama, mm
Dimensione
Sex
Paese
Acciaio
Maniglia
Collezione
Durezza
Fodero
Chiusura
Materiale
Filtro
Folding knife Böker Hunters Mono CPM 110609 8.9cm - 1
Multi-strumento Böker Hunters Mono CPM 8.9cm 110609
Böker Hunters Mono is the perfect knife for the huntsman who doesn't care for additional tools. The blade is secured via the usual backlock. The nickel silver bolsters and stag scales pay homage to tradition. The blade is made from powder metallurgical CPM CruWear with great edge retention. With its outstanding performance profile and a Rockwell hardness of 62-63 HRC, this steel has already set the standard for the Trio CPM and Quadro CPM. Weight is 130 g.
215,94 €

Spedizione dopo 10-20 giorni lavorativi

Japanese kitchen knife Yu Kurosaki Shizuku R2 Petty ZR-150PE0 15cm
Coltello da cucina Yu Kurosaki Shizuku R2 Petty 15cm ZR-150PE0
Yu Kurosaki Shizuku Petty knife with 150 mm blade. "Petty" is the Japanese word for a paring or utility knife, it comes from the French word “petite”. This Yu Kurosaki series feartures R2 tsuchime-finish blades. This handmade R2 petty knife has an incredible level of finish and polish, with Kurosaki's signature "Shizuku" Tsuchime patterns that are both aesthetically pleasing and functional. Oak wood handle. Wash and dry with a soft sponge, and safely store after use. Avoid cutting into bones, frozen foods, hard fruit pits. Recommended cutting surface: wood, rubberized boards and high-end composites, and quality plastics such as polyethene make acceptable cutting surfaces, and will help protect and prolong knife’s edge. Avoid glass, metal, countertops, and other rigid, non-forgiving surfaces. Yu Kurosaki works in Takefu Knife Village.
233,06 €

In magazzino

Gyuto Japanese kitchen knife Ittetsu Aogami 2 S/S Clad ISW-09 24cm
Gyuto (coltello da chef) Coltello da cucina Ittetsu Aogami 2 S/S Clad 24cm ISW-09
Gyuto Japanese kitchen knife Ittetsu Aogami 2 S/S Clad ISW-09 from Ittetsu knife with a 24 cm blade for any task in the kitchen. Octagonal handle is made of walnut. The bolster is made of Macassar ebony. The blade is made of Aogami #2 with stainless steel clad, Nashiji finnish. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance.  This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan.
176,61 €

In magazzino

Gyuto Japanese kitchen knife Yu Kurosaki Senko SG2 ZBSE-270CH 27cm
Coltello da cucina Gyuto (coltello da chef) Yu Kurosaki Koku sen Aogami Super 27cm ZBSE-270CH
Un coltello da cucina giapponese Gyuto di Yu Kurosaki della serie Koku Sen. La lama è realizzata in acciaio Aogami Super. La lunghezza della lama è di 27 cm e la durezza è di 60-62 HRC. Il manico è in legno di cotogno. Il coltello è interamente realizzato a mano dal maestro artigiano Yu Kurosaki. Non è lavabile in lavastoviglie. I coltelli da cucina giapponesi di Yu Kurosaki sono forniti in scatole firmate.
402,42 €

In magazzino

Santoku Japanese kitchen knife Yu Kurosaki Shizuku R2 ¨ ZR-165SAO 16.5cm
Santoku Coltello da cucina Yu Kurosaki Shizuku R2 16.5cm ZR-165SAO
Yu Kurosaki Santoku knife with 165 mm blade. This Yu Kurosaki series feartures R2 tsuchime-finish blades. This handmade R2 santoku has an incredible level of finish and polish, with Kurosaki's signature "Shizuku" Tsuchime patterns that are both aesthetically pleasing and functional. Octagon handle is made of oak wood. Wash and dry with a soft sponge, and safely store after use. Avoid cutting into bones, frozen foods, hard fruit pits. Recommended cutting surface: wood, rubberized boards and high-end composites, and quality plastics such as polyethene make acceptable cutting surfaces, and will help protect and prolong knife’s edge. Avoid glass, metal, countertops, and other rigid, non-forgiving surfaces. Yu Kurosaki works in Takefu Knife Village.
297,58 €

In magazzino

Gyuto Japanese kitchen knife Ittetsu VG-10 Damascus IWZ-103 18cm
Gyuto (coltello da chef) Coltello da cucina Ittetsu VG-10 Damascus 18cm IWZ-103
Excellent japanese knife Gyuto IWZ-103 from Ittetsu with a blade length of 18 cm for any task in the kitchen. The octagonal handle is made of pakkawood wood. The blade is made of high quality VG10 Damascus steel, hammer finish. This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 230 gr.
120,16 €

In magazzino

Coltello da cucina giapponese Sujihiki Seki Kanetsugu Zuiun Kiwami 9509 24cm
Coltello da cucina Sujihiki Seki Kanetsugu Zuiun Kiwami 24cm 9509
The sujihiki knife 9509 Zuiun Kiwami series from Seki Kanetsugu will charm you with its impressive design and the highest quality of workmanship and materials used. The Sujihiki is a double edge slicing knife with a long narrow blade that smoothly slices through meat or vegetables and preserves the integrity of each ingredient's freshness. The Zuiun is a special model manufactured to celebrate the company's centennial. Seki Kanetsugu Zuiun knives have blades with a wavy “hamon” pattern similar to Japanese swords. In its current incarnation, Seki Kanetsugu Cutlery has been making modern blades that realize the characteristics of Japanese swords--unbreakable, unbending and very sharp. The company also infused the Zuiun with the spirit of such swords. The blade is made using the San Mai technique, where the core is made of high-speed powder steel SPG2 (Super Powder Gold 2) and covered with 62-layer damascus. DLC (Diamond Like Carbon) blade coating is a thin layer that is applied to the surface to improve the properties of the knife. Surface treatment increases resistance to wear and abrasion.Finely sharpened by artisans, the surface of the blade features a scudding cloud-like pattern. It is also forged into a V-shaped "hamaguri-ba" blade, reflecting a characteristic of Japanese swords.The beautiful, very durable and easy-to-clean handle is made of laminate, has an octagonal shape and fits perfectly in the hand. All Seki Kanetsugu Zuiun Kiwami knives are made by hand. Delivered in wooden gift boxes. Weight 162 g.
282,26 €

In magazzino

Folding knife Böker Plus Collection 2024 01BO2024 9.3cm
Coltello da tasca Böker Plus Collection 2024 9.3cm 01BO2024
Folding knife Böker Plus Collection 2024 with 9,3cm blade. Together with Boker Plus, the U.S. knife designer and tactical expert with the relevant United States Marines experience unveils a collector's item limited to 500 pieces worldwide, the magic of which knife enthusiasts cannot escape. The satin-finished, ball-bearing drop point blade made from powder metallurgical CPM MagnaCut (62-63 HRC) opens smoothly and softly by means of the removable thumb stud on both sides and is locked by the titanium framelock. In addition, the ergonomic shape and the jimpings on the underside of the handle contribute to a balanced, secure feel.
374,50 €

In magazzino

Japanese kitchen knife Sujihiki Ittetsu Tadafusa OEM Aogami 2
Sujihiki Coltello da cucina Ittetsu Aogami 2 S/S Clad 27cm ISN-11
Sujihiki Ittetsu OEM Aogami 2 ISN-11 knife with 27 cm blade. The blade is made of Aogami #2 with stainless steel clad, Nashiji finnish. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance. Handle is made of walnut. This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 440 gr.
201,61 €

In magazzino

Japanese kitchen knife Gyuto Ittetsu Tadafusa OEM Aogami 2
Gyuto (coltello da chef) Coltello da cucina Ittetsu Aogami 2 S/S Clad 24cm ISN-15
The perfect Gyuto Ittetsu OEM Aogami 2 S/S Clad ISN-15 knife with a 24 cm blade for any task in the kitchen. Handle is made of walnut. The blade is made of Aogami #2 with stainless steel clad, Nashiji finnish. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance.  This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 450 gr.
197,58 €

In magazzino

Japanese kitchen knife Ittetsu Tadafusa OEM Garasuki Aogami 2 ISN-09 18cm
Coltello da cucina Ittetsu Garasuki Aogami 2 18cm ISN-09
Ittetsu Garasuki knife with 18 cm blade. Garasuki is a larger version of the Honesuki knife, also used for poultry but just bigger birds. The k-tip allows for precision while the longer blade allows for an easier slicing action. Blade is made of Aogami 2 steel. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance. Handle is antibacterial bubinga. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
157,26 €

In magazzino

Gyuto Japanese kitchen knife Miyabi 5000MCD 34373-161-0 16cm
Gyuto (coltello da chef) Coltello da cucina Miyabi 5000MCD 16cm 34373-161-0
Zwilling gyuto Miyabi 5000MCD 34373-161-0 chef's knife is a work of culinary art.  It has an authentic Japanese profile with an extremely sharp Honbazuke honing and is symmetrically polished at an angle of 19 degrees. Its slim yet stable blade delivers a perfectly controlled and clean cut. The blade is first sharpened twice on rotating stones and is then polished on a leather wheel.
The gyutoh's handle is made of Masur birch to give each knife a unique wood-grain pattern. An end cap and subtly styled mosaic pin complete the knife's elegant look. The handle is D-shaped to give the knife perfect balance and control for effortless and precision cutting. The blade has beautiful Damask patterning and a hard core of MicroCarbide MC63 powder steel enclosed within 100 layers of two different steels. The CRYODUR® blade is ice-hardened at -196 degrees Celsius to achieve a hardness rating of around 63 Rockwell that keeps the blade sharp and flexible. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.
Zwilling Miyabi 5000MCD Gyutoh chef's knife made in Japan. There are only best kitchen knives in MyGoodKnife’s range.
313,71 €

Spedizione dopo 10-20 giorni lavorativi

Nakiri Japanese kitchen knife Yu Kurosaki Senko SG2 Oak wood ZSE-165NA 16.5cm
Nakiri Coltello da cucina Yu Kurosaki Senko SG2 Oak wood 16.5cm ZSE-165NA
Yu Kurosaki Senko ZSE-165NA Nakiri knife with 165 mm blade. This Yu Kurosaki series features S/S Clad SG2 powdered steel tsuchime-finished blade. The blade surface has a unique hammered Senkou texture which represents Japanese fireworks. A really nice octagon handle made of oak. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
289,52 €

In magazzino

Santoku Japanese kitchen knife Yu Kurosaki Senko SG2 Oak wood ZSE-165SA 16.5cm
Santoku Coltello da cucina Yu Kurosaki Senko SG2 Oak wood 16.5cm ZSE-165SA
Yu Kurosaki Senkou Ei ZSE-165SA Santoku knife with 165 mm blade. This Yu Kurosaki series features S/S Clad SG2 powdered steel tsuchime-finished blade. The blade surface has a unique hammered Senkou texture which represents Japanese fireworks. A really nice octagon handle made of oak. Handmade by Mr. Yu Kurosaki.
289,52 €

In magazzino

Santoku Coltello da cucina giapponese Yu Kurosaki Shizuku R2 Keyaki ZR-165SA 16.5cm
Santoku Coltello da cucina Yu Kurosaki Shizuku R2 Keyaki 16.5cm ZR-165SA
Yu Kurosaki Santoku knife with 165 mm blade. This Yu Kurosaki series feartures R2 tsuchime-finish blades. This handmade R2 santoku has an incredible level of finish and polish, with Kurosaki's signature "Shizuku" Tsuchime patterns that are both aesthetically pleasing and functional. Octagon handle is made of keyaki wood. Wash and dry with a soft sponge, and safely store after use. Avoid cutting into bones, frozen foods, hard fruit pits. Recommended cutting surface: wood, rubberized boards and high-end composites, and quality plastics such as polyethene make acceptable cutting surfaces, and will help protect and prolong knife’s edge. Avoid glass, metal, countertops, and other rigid, non-forgiving surfaces. Yu Kurosaki works in Takefu Knife Village.
282,26 €

In magazzino

Multi-strumento Böker Hunters Quadro CPM 110649 8.5cm
Multi-strumento Böker Hunters Quadro CPM 8.5cm 110649
The demand for premium steels with extreme edge-holding is also immense for hunting applications, with a traditional knife design generally given preference in this case. Böker Hunters Quadro folder and multi-tool is anextensively field-tested Trio hunting classic is optionally also available with a powdered-metal primary blade made from CPM-CruWear with a Rockwell hardness of 62-63 HRC. This extraordinarily wear-resistant blade steel gives woodsmen significantly longer use between resharpenings compared to traditional 440C. The original design of the Quadro CPM was otherwise left intact, giving traditionally oriented hunters continued enjoyment. It also features a gutting blade, a saw and corkscrew. Böker Hunters Quadro CPM weighs 196 g.
333,07 €

Spedizione dopo 10-20 giorni lavorativi

Japanese kitchen knife Yu Kurosaki Shizuku R2 Petty ZR-120PE 12cm
Sold out
Coltello da cucina Yu Kurosaki Shizuku R2 Petty 12cm ZR-120PE
Yu Kurosaki Shizuku Petty knife with 120 mm blade. "Petty" is the Japanese word for a paring or utility knife, it comes from the French word “petite”. This Yu Kurosaki series feartures R2 tsuchime-finish blades. This handmade R2 petty knife has an incredible level of finish and polish, with Kurosaki's signature "Shizuku" Tsuchime patterns that are both aesthetically pleasing and functional. The octagonal handle is made this time of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Wash and dry with a soft sponge, and safely store after use. Avoid cutting into bones, frozen foods, hard fruit pits. Recommended cutting surface: wood, rubberized boards and high-end composites, and quality plastics such as polyethene make acceptable cutting surfaces, and will help protect and prolong knife’s edge. Avoid glass, metal, countertops, and other rigid, non-forgiving surfaces. Yu Kurosaki works in Takefu Knife Village.
243,03 €

Sold out

Bunka Japanese kitchen knife Yu Kurosaki Fujin R2 ZRF-165BUO 16.5cm
Sold out
Bunka Coltello da cucina Yu Kurosaki Fujin R2 16.5cm ZRF-165BUO
Bunka kitchen knife handcrafted by famous Japanese blacksmith Yu Kurosaki. The blade with a unique Tsuchime hammered pattern is made of three-layer R2 steel. The octagon handle is made of oak. When making this series, Kurosaki was inspired by Fujin, the Shinto god of the wind, what can be seen in the hammered texture.
274,90 €

Sold out

Gyuto Japanese kitchen knife Yu Kurosaki Fujin R2 ZRF-240CHO 24cm
Sold out
Gyuto (coltello da chef) Coltello da cucina Yu Kurosaki Fujin R2 24cm ZRF-240CHO
Yu Kurosaki Fujin R2 Gyuto is a functionally and aesthetically gorgeous handcrafted Japanese chef knife. When making this series, Kurosaki was inspired by Fujin, the Shinto god of the wind, what can be seen in the hammered texture. The 24 cm long blade with a unique Tsuchime hammered pattern is made of three-layer R2 steel. The octagon handle is made of oak wood.
378,49 €

Sold out

Nakiri Japanese kitchen knife Yu Kurosaki Fujin R2 ZRF-165NAO 16.5cm
Sold out
Nakiri Coltello da cucina Yu Kurosaki Fujin R2 16.5cm ZRF-165NAO
Fujin R2 Nakiri is a Japanese vegetable knife handcrafted by Japanese craftsman Yu Kurosaki. The octagon handle is made of oak. The blade with a unique Tsuchime hammered pattern is made of three-layer R2 steel. In making this series, Kurosaki was inspired by Fujin, the Shinto god of the wind, which can be seen in the hammered texture.
274,90 €

Sold out

Gyuto Japanese kitchen knife Yu Kurosaki Fujin R2 ZRF-210CHO 21cm
Sold out
Gyuto (coltello da chef) Coltello da cucina Yu Kurosaki Fujin R2 21cm ZRF-210CHO
This Japanese gyuto kitchen knife from Fujin R2 series is handcrafted by master Yu Kurosaki. When making this series, Kurosaki was inspired by Fujin, the Shinto god of the wind, what can be seen in the hammered texture. The 21 cm long blade of this Japanese Chef knife with a unique Tsuchime hammered pattern is made of three-layer R2 steel. The traditional octagon handle is made of oak. 
358,57 €

Sold out

Santoku Japanese kitchen knife Naoki Mazaki NM-1309 16.5cm
Sold out
Santoku Coltello da cucina Naoki Mazaki 16.5cm NM-1309
Santoku Naoki Mazaki NM-1309 with 16,5cm blade. The blade made of Shirogami #2 steel, with hardness 62-63HRC. Handle made of ash and quince. Handmade in Japan. Masaki-san, a blacksmith from Sanjo, is relatively young, he hails from the island of Hokkaido. A young man with no definite direction in life, he set off on his motorcycle across Japan. When he stayed in Sanjo, he was fascinated by the local blacksmithing and knife business. After about five years of apprenticeship with Yoshikane, he decided that he would prefer a more traditional, practical approach to creating knives.
Masaki-san prefers to use the more traditional Shirogami #2 to make his knives, and he often finishes many of his blades, giving them a rustic look. Shirogami has incredible cutting edge durability and sharpness.
152,42 €

Sold out

Bunka Japanese kitchen knife Yu Kurosaki Shizuku R2 ZR-165BUO 16.5cm
Sold out
Bunka Coltello da cucina Yu Kurosaki Shizuku R2 16.5cm ZR-165BUO
Yu Kurosaki Shizuku Bunka knife with 165 mm blade.  This Yu Kurosaki series feartures R2 tsuchime-finish blades. This bunka knife has an incredible level of finish and polish, with Kurosaki's signature "Shizuku" Tsuchime patterns that are both aesthetically pleasing and functional. Octagon handle is made of oak wood. Wash and dry with a soft sponge, and safely store after use. Avoid cutting into bones, frozen foods, hard fruit pits. Recommended cutting surface: wood, rubberized boards and high-end composites, and quality plastics such as polyethene make acceptable cutting surfaces, and will help protect and prolong knife’s edge. Avoid glass, metal, countertops, and other rigid, non-forgiving surfaces. Yu Kurosaki works in Takefu Knife Village.
297,58 €

Sold out

Petty Japanese kitchen knife Seki Kanetsugu Zuiun Kiwami 9502 15cm
Sold out
Petty Coltello da cucina Seki Kanetsugu Zuiun Kiwami 15cm 9502
The Petty 9502 Zuiun Kiwami series of knives from Seki Kanetsugu will charm you with the highest quality of workmanship and materials used. The Petty is a small utility knife used for peeling, shaping and slicing fruits and vegetables, chopping herbs and preparing side dishes. The Zuiun is a special model manufactured to celebrate the company's centennial. Seki Kanetsugu Zuiun knives have blades with a wavy “hamon” pattern similar to Japanese swords. In its current incarnation, Seki Kanetsugu Cutlery has been making modern blades that realize the characteristics of Japanese swords--unbreakable, unbending and very sharp. The company also infused the Zuiun with the spirit of such swords. The blade is made using the San Mai technique, where the core is made of high-speed powder steel SPG2 (Super Powder Gold 2) and covered with 62-layer damascus. DLC (Diamond Like Carbon) blade coating is a thin layer that is applied to the surface to improve the properties of the knife. Surface treatment increases resistance to wear and abrasion. Finely sharpened by artisans, the surface of the blade features a scudding cloud-like pattern. It is also forged into a V-shaped "hamaguri-ba" blade, reflecting a characteristic of Japanese swords.The beautiful, very durable and easy-to-clean handle is made of laminate, has an octagonal shape and fits perfectly in the hand. All Seki Kanetsugu Zuiun Kiwami knives are made by hand. Delivered in wooden gift boxes. Weight 72 g.
192,74 €

Sold out