Carbonstahlmesser

Küchenmesser aus Kohlenstoffstahl werden von Köchen und Hobbyköchen wegen ihrer außergewöhnlichen Schärfe und einfachen Schärfbarkeit geschätzt. Kohlenstoffstahl, aus dem Küchenmesser hergestellt werden, enthält üblicherweise 0,5 % bis 1,5 % Kohlenstoff.

Zu den bekanntesten Kohlenstoffstählen zählen der japanische Shirogami (Weißstahl) und Aogami (Blaustahl) sowie die europäischen und amerikanischen Stähle 440C, 1095 und 1055.

Einer der Hauptvorteile von Messern aus Kohlenstoffstahl ist die Möglichkeit, eine ultradünne Schneide zu erzielen. Darüber hinaus sind sie sehr leicht zu schärfen, insbesondere mit Wetzsteinen. Sie finden verschiedene Schärfgeräte, darunter auch Wetzsteine, in unserem Shop.

Küchenmesser aus Kohlenstoffstahl erfordern jedoch besondere Pflege, da sie korrosionsanfällig sind. Nach jedem Gebrauch muss die Klinge von Hand gespült und trocken gerieben werden. Bei Kontakt mit säurehaltigen Lebensmitteln (Zitronen, Tomaten) sofort abspülen. Längerer Kontakt mit Feuchtigkeit führt zu Rost. Messer aus Kohlenstoffstahl dürfen nicht in der Spülmaschine gereinigt werden.

Bitte beachten Sie, dass Rost an einem Kohlenstoffstahlmesser kein Garantiefall ist. Oft bildet sich auf solchen Messern eine Patina. Dabei handelt es sich nicht um Rost.

Patina ist eine Oxidschicht, die das Metall vor Korrosion schützt. Im Gegensatz zu Rost ist Patina dicht und stabil und zerstört das Metall nicht. Patina entsteht durch Oxidation von Eisen bei Kontakt mit Feuchtigkeit und säurehaltigen Substanzen. Die Farbe der Patina kann variieren – von hellgrau über dunkelblau bis hin zu schwarz.

Um die Langlebigkeit von Kohlenstoffstahlmessern zu gewährleisten, ist es wichtig, grundlegende Pflegeregeln zu beachten: Nicht nass lassen, nach Gebrauch gründlich abwischen und regelmäßig mit Mineralöl einfetten. Pflegeprodukte für Kohlenstoffstahlmesser finden Sie in unserem Shop.

Gyuto Küchenmesser TOJIRO Zen Black 21cm FD-1564
Die Messer Tojiro Zen Black FD-1564 ein perfektes Allzweckmesser für nahezu alle Schneidaufgaben in der Küche. Die Hauptaufgabe des mittelgroßen Kochmessers (Gyuto) ist aber das Schneiden von Fleisch, Fisch und Gemüse. Es eignet sich aber auch hervorragend zum Parieren oder Filetieren. Die Klinge dieses Messers wird aus einem sogenannten 3-Lagen Stahl hergestellt. Als mittlere Lage wird der bewährte VG-10 (HRC 60 +/-1) Stahl eingesetzt. Ein kohlenstoffhaltiger Stahl, der der Schneide eine besonders lange Schnitthaltigkeit beschert. Dieser sehr harte Stahl wird von den äußeren, chromhaltigen Lagen geschützt. Dies ergibt einen Verbundstahl mit hoher Widerstandsfähigkeitund lang anhaltender Schärfe.Der Griff des Messers ist aus echtem, dunkelbraunem, gebranntem  Kastanienholz in Kastanienform gefertigt. Das bedeutet, dass der natürliche Griff an der rechten Seite eine leichte Kante hat. Diese sorgt dafür, dass er noch angenehmer und sicherer in der Handinnenfläche liegt.
149,79 €

Vorrätig

Petty Küchenmesser Ikeuti Hamono 15cm 45-V30-150
This petty knife made by Ikeuti Hamono is good for fish and meat cutting and preparing. Ergonomic non-slip handle made of rubber. Single bevel. 15 cm blade is made of VG10 steel. Weight about 150 g.
84,00 €

Vorrätig

Küchenmesser Ittetsu Uraoshi Usuba Stamped 18cm IJS-11141
Das japanische Küchenmesser Ittetsu Uraoshi Usuba ist zum Schneiden und Raspeln von Gemüse konzipiert. Das Messer hat eine Klingenlänge von 180 mm. Der ovale Griff ist aus Magnolienholz gefertigt. Die Klinge besteht aus Shirogami #2 Kohlenstoffstahl. Kohlenstoffstahl neigt zur Oxidation, daher sollte das Messer trocken und sauber gehalten werden. Erlaubt ist nur Händewaschen in warmem Wasser mit obligatorischem Trockenwischen. Ittetsu-Messer werden in Handarbeit in der Stadt Echizen in der Präfektur Fukui in Japan hergestellt.
121,45 €

Vorrätig

Küchenmesser Ittetsu Uraoshi Kaisaki Stamped 15cm IJS-11155
The kaisaki it's a small general purpose single bevel traditional Japanese knife, which resembles a small Yanagiba and can be used for filleting small fish and shellfish, peeling and slicing vegetables, gutting or slicing small pieces of meat. Japanese kitchen knife Ittetsu Uraoshi Kaisaki IJS-11155 with 150 mm polished blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
80,97 €

Vorrätig

Küchenmesser Ittetsu Uraoshi Ajikiri Stamped 12cm IJS-11102
Japanese kitchen knife Ittetsu Uraoshi Ajikiri IJS-11102 with 120 mm polished blade made of Shirogami #2 carbon steel. Ajikiri is used for small fish, meat and vegetable. The oval shaped handle is made of magnolia wood. The blade is single bevel Uraoshi. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
74,90 €

Vorrätig

Bunka Küchenmesser Ittetsu Shirogami 21cm IW-11836
Bunka knife Ittetsu with 210 mm blade. This bunka is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Zanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
197,36 €

Vorrätig

Nakiri Küchenmesser TOJIRO GAI 16.5cm F-1350
New! Tojiro GAI Nakiri knife with 165 mm blade. Nakiri is traditional Japanese vegetable knife.  New Tojiro GAI series is suitable for both professional and home use. Not only practical, it is design wise superior and unique. VG-10 premium Japanese knife steel is in the core, which forged by 37 layers low and high carbon stainless steel. The handle with uniquely designed rugged surface fixed by hex bolts. It is one of a kind. Series name “GAI” came from a Japanese word "armor", which is inspired by the handle. Weight of Tojiro GAI Nakiri F-1350 is about 250 g.
Please, use your Tojiro knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
156,88 €

Vorrätig

Deba Küchenmesser Tojiro PRO SD für Linkshänder 16.5cm F-636L
Das Deba Japanisches Messer Tojiro PRO SD für Linkshänder F-636L ist ein einseitig angeschliffenes Messer mit breitem Klingenrücken. Es hat eine starke und schwere Klinge, die auch zum Zerteilen von Fischgräten geeignet ist. Das Messer ist spezialisiert auf das Filetieren, Durchschneiden, Durchtrennen von ganzen Fischen. Die extrem harte Kernschicht aus VG-10 Stahl sorgt für höchste Schneidleistung bei fantastischer Schnitthaltigkeit. Der ergonomische Griff ist sehr langlebig und liegt besonders angenehm in der Hand. 
311,73 €

Vorrätig

Yanagiba Küchenmesser Ryusen Hamono Houenryu 27cm HE-308
Yanagiba Houenryu is an exclusive knife created by Ryusen Hamono to commemorate the opening of their impressive new factory and boutique in Echizen, Fukui Prefecture. The blade is completely made of Damascus steel, which consists of stainless VG-10 and VG-2. The backside of the knife is thinner than on most yanagi knives and gives a sharper edge to the touch and makes it easier to slide over fish. The handle is crafted from a solid piece of walnut wood with a mosaic pin on one side and the Ryusen logo on the other. The knife comes in a beautiful box with.
3.238,71 €

Vorrätig

Yanagiba Küchenmesser Ryusen Hamono Houenryu 30cm HE-302
Yanagiba Houenryu is an exclusive knife created by Ryusen Hamono to commemorate the opening of their impressive new factory and boutique in Echizen, Fukui Prefecture. The blade is completely made of Damascus steel, which consists of stainless VG-10 and VG-2. The backside of the knife is thinner than on most yanagi knives and gives a sharper edge to the touch and makes it easier to slide over fish. The handle is crafted from a solid piece of maple wood with a mosaic pin on one side and the Ryusen logo on the other. The knife comes in a beautiful box.
3.339,92 €

Vorrätig

Nakiri Küchenmesser Ittetsu Shirogami Tall 75 mm 18cm IW-11840
Tall Nakiri knife Ittetsu with 180 mm blade. Tall nakiris are longer and taller than a normal nakiri knife. This one is 75 mm tall. This nakiri is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
191,29 €

Vorrätig

Sujihiki Küchenmesser Ittetsu Shirogami 21cm IW-11818
Sujihiki Ittetsu with 210 mm blade is a double edge slicing knife with a long narrow blade. This knife smoothly slices through meat or vegetables and preserves the integrity of each ingredient's freshness. This Ittetsu sujihiki is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
151,81 €

Vorrätig

Petty Küchenmesser Ittetsu Shirogami 18cm IW-11824
Petty knife Ittetsu with 180 mm blade. This japanese kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
121,45 €

Vorrätig

Gyuto Küchenmesser Ittetsu 18cm IW1187
Japanese chef knife gyuto Ittetsu with 18 cm blade. Blade is made of Shirogami Iron Clad steel. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. The Gyuto is the Japanese equivalent to a standard western style chef's knife and is an essential for the professional cook/chef.
154,85 €

Vorrätig

Gyuto Küchenmesser Tsutomu Kajiwara 24cm TK-1124
Japanese Chef knife gyuto handmade by Tsutomu Kajiwara. Blade 24 cm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
237,84 €

Vorrätig

Gyuto Küchenmesser Tsutomu Kajiwara 18cm TK-1122
Chef knife gyuto handmade by Tsutomu Kajiwara. Blade 180 mm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
187,24 €

Vorrätig

Küchenmesser Ittetsu Garasuki Shirogami 18cm IW11838
Garasuki knife Ittetsu with 180 mm blade. This garasuki is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Garasuki knife is designed for fillet chicken from bones, and fillet fish or pork or beef to remove meat from bones. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
156,88 €

Vorrätig

Küchenmesser Ittetsu Honesuki Shirogami 15cm IW11837
Honesuki knife Ittetsu with 150 mm blade. This honesuki is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Honesuki is specifically designed for de-boning and breaking down poultry, but many people have found the knife is also capable of filleting fish and red meat, or carrying out many of the tasks. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
140,68 €

Vorrätig

Küchenmesser Ittetsu Bunka Shirogami 16.5cm IW-1186
Japanese bunka knife Ittetsu with 165 mm blade. This bunka is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
171,04 €

Vorrätig

Küchenmesser Tsutomu Kajiwara Petty 15cm TK-1114
 Japanese Petty knife handmade by Tsutomu Kajiwara. "Petty" is the Japanese word for a paring or utility knife, it comes from the French word “petite”. Blade 150 mm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
165,98 €

Vorrätig

Küchenmesser Tsutomu Kajiwara Petty 12cm TK-1112
Petty knife handmade by Tsutomu Kajiwara. Blade 120 mm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Weight about 95 g. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
156,88 €

Vorrätig

Küchenmesser Old Hickory Mini 8.2cm OH7028
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
Old Hickory Mini fillet knife is 6.75" (17.15 cm) overall. The knife has a 3.25" (8.26 cm) satin finish 1075HC steel blade. Brown wood handle. Brown leather belt sheath. Boxed.
34,41 €

Vorrätig