Best sellers

Filter by
Categories
Price
Manufacturers
Filter
-10%
Paring Kitchen knife Miyabi 5000MCT Shotoh MIZU 9cm 32910-091-0
The Shotoh from Miyabi is designed for the slicing, cutting and peeling of fruit and vegetables. Preparing cold platters or delicious curries containing lots of vegetables are easy with this knife. This series MIZU 5000MCT has a core of MC 63, microcarbide powder steel (63 HRC) covered with 2 layers of ice- hardened Cryodur stainless steel. Cutting edge has an angle of 19°. Hammered finish (Tsuchime) which prevents food from sticking to the blade and ergonomic handle of micarta. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Made in Seki, Japan. 
€165.86
€184.29

In stock

-10%
Kitchen knife Miyabi 5000FCD RAW Gyutoh 20cm 34681-201-0
The gyutoh, or chef’s knife, is a general purpose knife for the preparation of larger cuts of meat and vegetables. It has a fine carbide steel core which gives the knife very good initial sharpness and cutting edge retention. The core is embedded in 48 layers of steel which create each knife’s unique Damascus-design. The symmetrical cutting edge is Honbazuke honed. This three-stage grinding, sharpening and polishing process gives the knife razor-like sharpness. The entire length of the edge can be used to cut as there is no finger guard. The join between handle and bolster is completely smooth, which helps to prevent calluses forming on the thumb and forefinger and gives a comfortable grip. Hand wash only for best care and avoid cutting on glass, ceramic or stone boards as these will prematurely dull the edge. Maintain and sharpen using whetstones. - FC61 fine carbide steel blade core; - 48 layers of steel surrounding the core create the Damascus-design; - FRIODUR ice-hardened for extreme hardness; - Rockwell hardness of approximately 61; - Symmetrical cutting edge; - Pakka wood handle; - Steel mosaic pin and handle end cap; - Made in Japan.
€180.73
€200.81

Shipping after 10-20 business days

-10%
Paring Kitchen knife Miyabi 5000FCD RAW Shotoh 9cm 34680-091-0
Zwilling Miyabi 5000FCD Shotoh paring knife 9 cm is ideal for cutting, cleaning and peeling fruit and vegetables. Shotoh has a hard fine carbide steel core which gives very good cutting edge retention and sharpness. The FC61 steel core of the blade is embedded in 48 outer layers of Damascus-design steel, giving each knife its unique pattern. The cutting edge is symmetrical (not single bevel) so it’s suitable for both right and left-handed use. The edge is Honbazuke-honed – a three-stage grinding, sharpening and polishing process resulting in razor-like sharpness. There is no finger guard so the whole length of the cutting edge can be used. The pakka wood handle seamlessly joins the half-bolster. The smooth join helps to prevent calluses forming on the thumb and forefinger. For best care, it’s recommended to hand wash only. Maintain and sharpen on a whetstone, and using glass, ceramic or stone cutting boards should be avoided as this can prematurely dull the cutting edge. Zwilling Miyabi 5000FCD shotoh paring knife made in Japan.
€108.15
€120.16

Shipping after 10-20 business days

-10%
Kitchen knife Ittetsu Honesuki 15cm IS-47
Ittetsu Honesuki knife with 15 cm blade. Honesuki is specifically designed for de-boning and breaking down poultry, but is also capable of filleting fish or meat and carrying out many tasks. Blade is made of SLD steel by Hitachi. SLD is a cold work die steel with high abrasion resistance for general use, excellent harden-ability and minimal quench stress. Handle: ashtree / quince. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
€127.02
€141.13

In stock

-10%
Fixed blade Knife Böker Försternicker Stag 11cm 120517
Boker Försternicker Stag EDC fixed is ideal for all outdoor tasks on the hunt, since the sturdy blade with its high flat grind combines stability with excellent cutting properties. The use of modern Böhler N690 for the blade highlights the exceptional practical value thanks to the superior edge retention compared to classic nicker steel. It is also easy to sharpen. The nickel silver bolster and butt give the Försternicker an excellent grip. The knife is easy to carry in the classic nicker sheath. With scales made from carefully selected stag. Weight 205 g.
€245.26
€272.51

Shipping after 10-20 business days

-10%
Fixed blade Knife Böker Stag 19.8cm 121547HH
Boker Bowie Stag knife´s design was based on original drafts from the early 19th century and equipped with an extremely sturdy blade made from N690 and exclusive handle scales made from carefully selected stag. Handcrafted by Boker Manufactory Solingen. Comes with a high-quality western leather sheath and a new version of the historic Boker tree symbol. Weight 537 g.
€375.78
€417.53

Shipping after 10-20 business days

-10%
Gyuto Kitchen knife Seki Kanetsugu Pro-M 27cm 7007
The blade is made of Molybdenum alloy high carbon stainless steel with traditional"Hamaguri ba" (Convex edge grind), the edge that made Japanese swords famous, for an outstanding sharpness and durability,and yet easy to resharpen. It is heat treated and then Sub Zero quenched. which refrigerates the blade to 70 degrees for longer edge retention and strength to brittleness and chipping.pro m handle1.jpg Since introducing the Kanetsugu Pro M series two years ago, Seki Kanetsugu has received a positive reputation for their unique Round Shape of Black Pakka wood handle for comfortable grip, well balanced and practical shape. You might have not been familiar with this shape of the handle and the blade edge (Convex edge). Mr. Kawamura (President of Kanetsugu company) has spent numerous times to research and study to produce the best performance chef knives. Recomeneded for both - Home Chefs to Pro Chefs who demand extra sharpness and cutting performance for the sophisticated cooking life.
€72.22
€80.24

In stock

-10%
Fixed blade Knife Böker Integral II Stag 10cm 123541
Boker Integral II Stag fixed is the compact version of the full Integral, just as sturdy and die-forged from a single piece of steel. The sturdy blade and excellent ergonomics of the handle scales of exclusive stag make the knife perfect for hunting tasks and more. The conical tang and hand-ground finger choils highlight the sophisticated craftsmanship and offer a much more comfortable grip. The blade is made from the reliable outdoor material 440C and equipped with a flat grind that offers great stability even for heavy-duty tasks. The knife is fully handcrafted by Boker Manufactory Solingen and comes with a high-quality leather sheath. Weight 208 g.
€252.43
€280.48

Shipping after 10-20 business days

-10%
Fixed blade Knife Böker Vollintegral 2.0 Rosewood 11.8cm 121585
Boker Vollintegral 2.0 fixed has been a fixture in Boker´s product line, and this knife is also a icon among Boker hunting knives. The rugged construction of the knife is based on a single steel blank forging, while the outstanding ergonomics of the clever handle scale design have been enthusiastically accepted by legions of hunters. The handle as whole and the surfaces on the parrying element and pommel are more rounded to optimize handling and also to further enhance the elegant visual appeal. In addition, the handle scales are precision-milled to minimize manufacturing tolerances, thus improving component fit and ergonomics to the maximum achievable level. The blade 118 mm grind was converted from the previous hollow grind to a flat grind to increase strength. As before, the trusted 440C is used as the blade steel. Shipped with leather sheath. The handles are made of hand-selected certified imported rosewood. Weight 240 g.
€268.21
€298.01

Shipping after 10-20 business days

-10%
Fixed blade Knife Böker Vollintegral XL 2.0 Stag 14.7cm 125638
Boker Vollintegral XL 2.0 Stag fixed is the big brother of the ageless trusty Full-Tang Vollintegral 2.0 Stag and XL knife addresses the frequently expressed desire for a larger version. With its impressive blade made of ice-hardened 440C with 58 to 59 HRC the Full Integral is also suitable for stronger game, whether in Northern Europe or overseas. It has a flat surface grinding which maximises the stability of the blade. The knife is drop-forged from a single piece of steel and is fitted with elaborately contoured handle scales made from hand-picked deer horn, which are an absolute speciality due to the enormous size of the knife alone. The classic natural material is usually processed in much smaller profiles and is extremely difficult to find in this size. Supplied with a high-quality leather sheath. Handmade in the Boker knife manufactory Solingen. Weight 338 g.
€317.90
€353.23

In stock

-10%
Fixed blade Knife Böker Integral II Walnut 10cm 122541
Boker Integral II fixed is die-forged from a single piece of steel. The rugged blade and excellent ergonomics of the handle scales make the knife perfect for hunting tasks and more. The conical tang and hand-ground finger choils highlight the sophisticated craftsmanship and offer a much more comfortable grip. The scales consist of carefully selected pieces of domestic walnut. The scales are precision-milled to minimize production tolerances. The blade is made from the reliable outdoor material 440C and equipped with a flat grind that offers great stability even for heavy-duty tasks. Comes with a high-quality leather sheath. Weight 176 g.
€235.94
€262.15

Shipping after 10-20 business days

-10%
Fixed blade Knife Böker Vollintegral 2.0 Stag 11.8cm 121586
Boker Vollintegral 2.0 Stag fixed has been a fixture in Boker´s product line, and this knife is also a icon among Boker hunting knives. The rugged construction of the knife is based on a single steel blank forging, while the outstanding ergonomics of the clever handle scale design have been enthusiastically accepted by legions of hunters. The handle as whole and the surfaces on the parrying element and pommel are more rounded to optimize handling and also to further enhance the elegant visual appeal. In addition, the handle scales are precision-milled to minimize manufacturing tolerances, thus improving component fit and ergonomics to the maximum achievable level. The blade grind was converted from the previous hollow grind to a flat grind to increase strength. As before, the trusted 440C is used as the blade steel. Shipped with leather sheath. With classic stag scales. Weight 240 g.
€311.37
€345.97

Shipping after 10-20 business days

-10%
Fixed blade Knife Gerasim Custom Metal Vektor 12.6cm
Vektor is a knife created in Zlatoust at the production of "Gerasim Custom Metall" - a unique production of metalsmiths of the Gerasimov family. Damascus steel blade 126 mm. Gerasimov masters were at the origin, and were the creators and developers of Damascus steel brand "ZLADINOX". Today, they create unique blades and knives on their own.
€108.15
€120.16

In stock

-10%
Tactical pen Blackjack Slimline BJ068
Blackjack Slimline tactical pen is 5.25" (133 mm) Pen has a black matte aluminum construction. Screw off cap. Twist open. Medium point black ink. Blunt defense tip. Pocket clip. Weight 3.2 oz. Made in China.
€10.89
€12.10

In stock

-10%
Folding knife Buck Knives 112 Auto 7.6cm 0112BRSA-B
The folding knife Buck 112 Ranger is the younger sibling of the renowned 110 model. This version is equipped with an automatic lock. The Buck 112 Ranger Auto features a blade made of 420HC Stainless steel. The handle overlays are made of black wood (crelicam ebony). The Buck 112 Ranger Auto comes with a leather sheath.
€171.39
€190.44

In stock

-€50.00
Fixed blade Knife TOPS BOB Hunter Rocky Mountain 11.4cm TPBROS01RMT
This knife was developed by designers from the Brothers of Bushcraft, a coalition of North American men dedicated to developing wilderness survival skills. The all-metal BOB Hunter Rocky Mountain knife measures 254 mm in length and has a 121 mm blade. It's a compact yet extremely comfortable knife for hiking and camping. The 4.7 mm blade is made of 1095 high-carbon steel. The handle scales are made of Micarta. The heel on the handle can be used to strike sparks. The sheath is made of Kydex. The knife weighs approximately 400 g.
€206.45
€256.45

In stock

-10%
Cap Buck Knives Youth 89151
Buck Knives MFG Co. Patch. Adjustable hook and loop closure back. Cotton sweatband. Cotton construction. Color: Blue. Size: One size fits most.
€15.24
€16.94

In stock

-10%
Cap Buck Knives Navy Blue 89148
The Buck Knives Manufacturing Company hat is made from Navy Blue cotton twill and features a logo patch, flat visor, cotton sweatband and adjustable snap back. One size fits most. 
€15.24
€16.94

In stock

-€15.00
Cap Buck Knives Trucker Multicam 89146
This Buck Knives mens cap features a brown mesh back and camo solid front with Buck logo patch stitched to the front. One size fits most.
€18.00
€33.00

In stock

-10%
Fixed blade Knife Smith&Wesson Set of 3 Black TK8BCP
Smith & Wesson throwing set has a three black 8" overall throwing knives with sharpened tip. One piece 2Cr13 stainless construction with drilled hole and slot design. Embroidered black nylon belt sheath holds both. Weight 16 oz.
€32.66
€36.29

In stock

-10%
Cap Buck Knives Womens Trucker White/Turquoise 89140
This Buck Knives womens cap features a tan mesh back and turquiose solid front with Buck logo leather patch stitched to the front. Adjustable strap to fit med/lrg size heads.
€15.24
€16.94

In stock

-10%
Folding knife Rough Rider Blue 9.2cm 2145
Rough Rider Blue folder is 4.63" (11.76cm) closed. Knife has a 3.63" (9.22cm) stainless blade. Blue stonewash finish stainless handle. Extended tang. Thumb pull. Lanyard hole. Pocket clip. Black stonewash and satin finish blade. 
€20.32
€22.58

In stock

-10%
Folding knife Rough Rider Dreamcatcher 7.9cm 1525
Folding knife Rough Rider Dreamcatcher Trapper is 4.125" (10.5 cm) closed. Knife has a 440A stainless 3-1/8″ clip point blade and 3-1/8″ spey blade. Synthetic turquoise and coral handles with genuine abalone accents. Brass liners. Nickel silver spacers and ringed, stamped bolsters.
€21.05
€23.39

In stock