Ka-Bar Knives

KA-BAR 1226 deluxe little fin knife, leather handle. Little Finn features a 3 5/8 in blade made of DIN 1.4116 Stainless Steel with a brass guard, aluminum butt and a polished stacked leather handle. Knife has an overall length of 7 in. and includes a leather sheath.

Ka-Bar Becker BK10 Crewman knife is a large fixed blade that is both tough and designed for whatever gets thrown its way. The blade is flat ground 1095 Cro-Van steel and the handles are Zytel, ergonomically contoured for comfort and grip. The Crewman comes with a heavy duty polyester sheath.

Ka-Bar Becker Short Drop Point is 9 1/8" overall tactical knife. 4 3/8" black coated 1095 Cro-Van stainless drop point blade with thumb ridge. Hardened to 56-58 HRC. Full extended tang with lanyard slot. Black Zytel handles. Two tone mossy green and desert tan cordura belt sheath with protective liner and storage pouch. Also includes an extra set of coyote tan handles. Made in the USA.

The Becker Necker is made to the same dimensions as the original neck knife. This is a knife that will tackle whatever task you throw at it. The Necker features a black finished 1095 Cro-Van steel blade. Black plastic injection molded glass-filled nylon sheath and 550 cord included.

With the introduction of the KA-BAR Becker Tac Tool, there is finally a tool-knife designed for the needs of the Tactical Officer. The Tac Tool was developed in close consultation with John Benner, 20-year field commander of the Hamilton County Ohio Police Association SWAT Team, and President and Chief Instructor of the Tactical Defense Institute. Tac Tool's smash, bach, pry, hammer and cut. When you leave the battering ram at the door, the Tac Tool gives you a fistful of handy power. You can lift stubborn hinge pins, pry open doors and windows, quickly cut "550 cord", hammer glass out of the way, or use it as a knife. The blade is finished with a durable reinforced epoxy coat. The sheath is ambidextrous and is compatible with most tactical belts and LBE systems. The blade is made of 1095 Cro-van, which is like 1095 carbon - it is a low alloy carbon steel but with chrome and vanadium carbides…to provide extra strength and wear resistance.

The Becker Combat Bowie is a synthesis of Becker's trademark ergonomic handle design and a traditionally profiled American Bowie style blade, the Combat Bowie has proven to perform well during extended periods of use with less user fatigue than most other knives in its class. It is a useful performer in a variety of combat and field craft chores. Features a black finished 1095 Cro-Van steel Bowie style clip point blade measuring over 9" -- this knife means business. The Grivory handles are ergonomically designed and keep the weight down on this knife. Comes with cordura sheath.

Ka-Bar Fighting knife 5012 stands up to the daily tasks of driving stakes, cutting open MREs and defending lives. U.S. servicemen and civilians alike asked for a foliage green version of the well-known Black KA-BAR - and here it is! A partially serrated edge makes cutting looped and synthetic materials a breeze. Tang stamped USA. MOLLE compatible hard plastic sheath included.

The traditional KA-BAR marked for Army personnel and featuring a partially serrated edge to aid in cutting synthetic and looped materials.  Blade of Ka-Bar Army Fighting knife is made of 1095 steel. Tang stamped U.S. ARMY. Leather sheath included.

Classically styled leather-handled hunting knives have been popular since the early 1900s. Dressy enough for gift giving and practical for field use. Features a brass guard and aluminum butt cap. Plastic lined leather KA-BAR® sheath included.

A remake of the world famous Mark I USN knife, this updated version features epoxy powder coated blades for superb corrosion resistance and a non-reflective surface. Mark 1 - 9 3/8" overall. 5" 1095 Cro-Van steel blade. Brown leather wrapped handle. Stainless black coated guard and pommel. Embossed brown leather belt sheath with lanyard hole.

The tactical knife Ka-Bar Short USMC 1250 is 234 mm overall. Black epoxy powder coated 1095 high carbon steel blade with blood groove and USMC tang stamp. Oval, stacked leather handle with black epoxy powder coated carbon steel guard and butt.

The Ka-Bar USA Fighting 1214 knife is 305 mm overall. Knife has 178 mm black epoxy powder coated 1095 carbon steel  partially serrated  blade with blood groove and black Kraton G handle with black epoxy powder coated carbon steel guard and butt. Black glass filled nylon belt sheath. Weight 550 gr.

The Ka-Bar  Wrench 1119 is one-piece construction 18,1 cm overall knife. It has 7,6 cm stainless 425 high carbon steel blade. Knife comes with plastic sheath. 

Hunting and Outdoor knife Ka-Bar Becker Kephart is 9.63" (24,46 cm) overall. Knife has 5.13" (13,03 cm) stonewash finish 1095 Cro-Van carbon steel spear point blade. Handle made of natural walnut. Full tang. Designed by Ethan Becker. Kephart comes with brown leather belt sheath.

The KA-BAR Throwing Knife Set features three throwing knives specifically designed to be perfectly balanced for throwing. The Throwing Knives are made of black coated 3Cr13 steel and feature a large hollow ground blade. The blades have the distinctive KA-BAR skull logo stamped on them and come complete with a black polyester sheath to carry them. Stock up on this throwing knife set and limit your time walking back and forth to your target!

Ka-Bar TDI Law Enforcement fixed knife is 7 5/8" overall. Knife has 3 5/8" black powder coated AUS-8A standard edge stainless drop point blade, full tang and black Zytel handles. Hard plastic friction sheath that is fitted with nylon/cordura MOLLE straps. The TDI Law Enforcement Knife was designed to be used as a "last option" knife. In extreme close quarters encounters where a suspect is attempting to take an officer's handgun, or the officer cannot access his/her handgun, the TDI knife is available. Designed as an "off hand" knife that draws like a pistol, the reversible sheath can be worn on either the right or left side of the officer's belt.

The BKR22 Ka-Bar Becker Campanion is the same knife as the BK2 it simply has a different type of sheath. It is yet another great knife from the Ka-Bar/Becker stable. This one has been around for a while and has alwyas been a popular knife because of its sturdy nature and no nonsense design. The Becker Companion is 10 3/4" overall with a very storng 5" black epoxy powder coated 1095 Cro-Van carbon steel drop point blade.It has Black Grivory handles with lanyard hole and is a full tang design for maximum strength. Comes with polyester sheath.

Ka-Bar Thunderhorse Thrower is 15.63" overall. Knife has a clip point blade 10.25" made of black coated 1095 Cro-Van carbon steel. One-piece construction. Weight 20oz.

Using a process much like screen-printing on a t-shirt, KA-BAR applies gold-colored paint to their standard KA-BAR knives to create intricately detailed works of art meant to honor and commemorate those men and women in uniform who serve our Country. Active-duty and retired military personnel will appreciate the thought and care that goes into each of these collectible pieces. This laser engraved commemorative knife features the world-famous brand name, "KA-BAR", a roaming bear and "The Union" shield, all presented in a Victorian-era style logo to commemorate KA-BAR's 120th year of business. Tang stamped USMC. Leather sheath included.