Neck Knives

Filter by
Price
€ €
Manufacturers
Blade Length, mm
Country
Steel
Handle
Hardness
Sheath
Filter
Neck knife Cold Steel Double Agent I 39FK 7.2cm
Neck knife Cold Steel Double Agent I 7.2cm 39FK
Cold Steel's new Double Agent® neck knives possess a significant set of advantages worth noting. Designed by Zach Whitson, with either a Karambit or Clip Point blade style, they're thin, flat, and super light (a little over 3 ounces including sheath). This makes them easy to conceal and very comfortable to wear. Their most audacious and notable feature, however, is their double ring handle design. Slip an index finger through the front ring nearest the blade and your pinky finger through the rear ring and close your fist to obtain a forward grip and vice versa for a reverse grip. It doesn't matter how hard you cut, chop, hack, hammer or thrust with the Double Agent®. Its twin rings will always prevent your hand from sliding forward on the razor sharp edge and will likewise resist the effects of centrifugal force or the efforts of an adversary to wrest the Double Agent® from your grasp.
€37.90

In stock

Neck knife Ka-Bar Becker Necker BK11 8.2cm - 1
Neck knife Ka-Bar Becker Necker 8.2cm BK11
The Becker Necker is made to the same dimensions as the original neck knife. This is a knife that will tackle whatever task you throw at it. The Necker features a black finished 1095 Cro-Van steel blade. Black plastic injection molded glass-filled nylon sheath and 550 cord included.
€52.42

In stock

Neck knife Camillus Heater 19238 5cm - 1
Neck knife Camillus Heater 5cm 19238
4.37" Carbonitride Titanium® Non-Stick Blade, with Molded Sheath Carbonitride Titanium® 4.37" Boot/Neck Knife, 1.75" Blade, Finger Hole, Bottle Opener, Camo Paracord Loop, Beaded Chain, Molded Sheath with Belt Clip, Lifetime Warranty
€23.39

In stock

Neck knife Cold Steel Cold Steel Double Agent II 39FN 8cm
Neck knife Cold Steel Cold Steel Double Agent II 8cm 39FN
Cold Steel's new Double Agent® neck knives possess a significant set of advantages worth noting. Designed by Zach Whitson, with either a Karambit or Clip Point blade style, they're thin, flat, and super light (a little over 3 ounces including sheath). This makes them easy to conceal and very comfortable to wear. Their most audacious and notable feature, however, is their double ring handle design. Slip an index finger through the front ring nearest the blade and your pinky finger through the rear ring and close your fist to obtain a forward grip and vice versa for a reverse grip. It doesn't matter how hard you cut, chop, hack, hammer or thrust with the Double Agent®. Its twin rings will always prevent your hand from sliding forward on the razor sharp edge and will likewise resist the effects of centrifugal force or the efforts of an adversary to wrest the Double Agent® from your grasp.
€39.52

In stock

Neck knife Cold Steel Spike Tanto CS53NCT 9.5cm - 1
Neck knife Cold Steel Spike Tanto 9.5cm 53NCT
Entirely re-engineered for this year our Spike series continue to raise the bar for neck knives! Thin, light and super-tough, their razor sharp, zero ground blades, are complemented by heavily scalloped, textured handle scales that offer a comfortable, secure grip. Integral quillons provide a safe stop for index finger and thumb, while the textured Faux G-10 provides excellent positive traction even when your hands are cold, wet and slippery. Available in four distinctive blade shapes (Bowie, Drop Point, Tokyo and Tanto point) they offer all the strength of a solid steel one-piece construction (much stronger than any tactical folder and even rivaling the strength of some boot knives) while still being light enough to carry all day without fatigue. The brand new Spike series is come complete with all-new Secure-Ex sheaths that provide even greater retention and safety. Super lightweight (weighing in at 3oz in the sheath!) the Spikes can be comfortably worn around the neck 24/7 by using the black bead lanyard provided, or carried on a waistband or belt by taking advantage of their new Tek-Lok™ compatible design. Easily concealed, razor sharp and light as a feather – the new Spike series by Cold Steel!
€39.52

In stock

Fixed blade Knife Extrema Ratio S-THIL Black Warfare 0410000223BWSE 11.9cm
Sold out
Fixed blade Knife Extrema Ratio S-THIL Black Warfare 11.9cm 0410000223BWSE
Extrema Ratio S-THIL Black Warfare is a special version of the S-THIL model. Knife is made from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with the designer Thilo Arnd Schiller. The spear point type blade. The special Black Warfare version of Extrema Ratio S-THIL uses the innovative and original Geotech Camo pattern, created by laser engraving.
€262.15

Sold out

Neck knife Cold Steel Urban Edge Full Serration 43XLSS 6.3cm
Sold out
Neck knife Cold Steel Urban Edge Full Serration 6.3cm 43XLSS
The Neck knife Cold Steel Urban Edge Full Serration 43XLSS with double serrated edge blade. Many of Cold Steel's employees use them regularly - opening boxes, pausing to sign for deliveries or type on computers or tablets - all without the knife ever leaving their hand! Light enough to be worn as a neck knife or hung from a key ring, but still packing enough cutting power to handle tasks that would challenge even some larger knives; the Urban Edge also makes a formidable last resort self-defense tool. 
€37.10

Sold out

Neck knife Cold Steel Mini Pal 43NSK 2.5cm
Sold out
Neck knife Cold Steel Mini Pal 2.5cm 43NSK
The partially serrated blade is made of AUS8 steel. The Neck knife Cold Steel Mini Pal 43NSK should be standard equipment for survival in today's urban jungle!  Weighing less than half an ounce, it's perfectly at home unobtrusively carried in a pocket or purse and can be easily attached to a key ring, or hung around the neck.
€27.34

Sold out

Neck knife Extrema Ratio Kiri Dark Stone 04.1000.0187/BLK-SW 6cm
Sold out
Neck knife Extrema Ratio Kiri Dark Stone 6cm 0410000187BLKSW
Neck knife Extrema Ratio Kiri Dark Stone 04.1000.0187/BLK-SW with 6cm blade. Kiridashi is a type of Japanese knife, a cutting multipurpose tool. Its asymmetric bevel, where only one of the two sides is ground and the other is left flat, is one of its features. This traditional Japanese knife has been recreated by Extrema Ratio in accordance with its style, giving it a more tactical appearance than the original. Both the Dark Stone and Satin finishes, made of Böhler N690 steel hardened to 58 HRC, are offered for the Extrema Ratio KIRI.
Two black anodized anticorodal metal scales make up the handle. The metal eyelets on the pre-shaped Kydex sheath allow you to attach it to an M.O.L.L.E. system webbing and insert a paracord.
€210.33

Sold out

Neck knife SOG Snarl JB01KCP 5.7cm
Sold out
Neck knife SOG Snarl 5.7cm JB01KCP
Neck knife SOG Snarl JB01KCP with total length of the knife 10,8cm. The 5.7 cm blade made of 9Cr13CoMoV steel. One piece satin stainless construction with finger choil. Black molded Kydex sheath with black stainless clip and black stainless ball chain. A Jason Brous and SOG collaboration. 
€50.80

Sold out

Fixed blade Knife Smith&Wesson Neck and Boot Combo SW1188453 8.2cm
Sold out
Fixed blade Knife Smith&Wesson Neck and Boot Combo 8.2cm SW1188453
The set Smith&Wesson Neck and Boot Combo SW1188453 includes: 7.25" ( 184 mm) overall boot knife with 3.25" ( 82 mm) blade and 4.75" ( 120 mm) overall neck knife with 2.88" ( 73 mm) blade. The blade is made of stainless steel with black finish. Comes with black synthetic belt sheath, ball chain lanyard. Black rubberized synthetic handle. Full tang. Lanyard hole.
€37.10

Sold out

Fixed blade Knife Extrema Ratio Satre S600 Black 0410000222BLKS6 6.8cm
Sold out
Fixed blade Knife Extrema Ratio Satre S600 Black 6.8cm 0410000222BLKS6
The Extrema Ratio Satre S600 Black is a pocket-sized, light and extremely resistant fixed blade knife. Given its characteristics, it can be employed in a large variety of activities and fields, including survival and bushcraft, or it can be part of an EDC. It was designed in collaboration with Daniele Dal Canto, a Master Advanced F.I.S.S.S. instructor (Italian Federation of Sport and Experimental Survival). It can be worn as a neck knife thanks to its Paracord 550 lanyard.  The pre-shaped Kydex sheath has eyelets, allowing to apply both lanyard and accessory holder. This allows to clip the sheath together with not only belts, but also pockets, trousers, jackets, shirts and t-shirts. ULTICLIP gives the possibility to position the knife both vertically and horizontally and allows a more accessible use for left and right handed. The full-tang skeletonized structure allows the customization of the knife by using the Paracord as an handle cover. This Satre is made with Böhler S600 steel, which is thermally and cryogenically treated in order to obtain an exceptional hardness of 64 HRC. This material was chosen for its resistance to oxidation, for the durability of its edge and especially for its reliability, which has been proven over the years. 
€128.23

Sold out

Neck knife TOPS Mini Tanimboca Puukko MPUK-01 4.1cm
Sold out
Neck knife TOPS Mini Tanimboca Puukko 4.1cm MPUK-01
The TOPS Mini Tanimboca Puukko was designed by Goran Mihajlovic, who also designed the original Tanimboca made by TOPS. The Mini Tanimboca Puukko is a great tool for bushcraft, planing and even some EDC tasks. This knife is smaller than the others and has no guard. The knife can be held by the blade with several grips. If you like DIY craft, especially in the forest, this knife is a must-have. It has the classic Tanimboca Puukko look, but in a much smaller package. The rounded black micarta handle makes it very comfortable despite its size. The brown leather sheath is designed to be worn on the neck, but also has a loop that fits most belts.
€109.68

Sold out

Neck knife Cold Steel Mini Tac Bowie 49HCF 9.2cm
Sold out
Neck knife Cold Steel Mini Tac Bowie 9.2cm 49HCF
Designed by Andrew Demko, the Cold Steel Mini Tac Bowie offers the well-known versatility of a sharp and durable bowie blade, making it ideal for use in the field or for everyday wear. Supplied with a Secure-Ex ™ shell and steel chain, it is sure to give you years of service.
€20.97

Sold out

Fixed blade Knife Böker Plus Sigyn 02BO037 5cm
Sold out
Fixed blade Knife Böker Plus Sigyn 5cm 02BO037
Boker Plus Sigyn extremely handy fixed is a lightweight neck knife designed by Andre Schröter and, like the previous models of Midgards knives, can be equipped with different handle scales. Using a standard 3D printer, these can be easily printed out by yourself in a wide variety of shapes, colours and materials. The compact three-finger knife comes with an ergonomically shaped handle made of durable G10. The finely textured handle scales lie securely in the hand even when wet and are also provided with a red fiber layer. Jimpings in the area of the thumb rest further increase work safety. The satin-finished Drop point 50 mm blade is made of D2 and is equipped with a decorative groove. With a lanyard hole, ball chain and custom-fit Kydex sheath. Weight 67 g.
Available from October 6th, 2023
€39.92

Sold out

Neck knife Böker Plus Urd 2.0 02BO523 6cm - 1
Sold out
Neck knife Böker Plus Urd 2.0 6cm 02BO523
The Böker Plus Urd 2.0 is a solid fixed knife, made to carry around your neck with a sleak kydex sheath. The Urd was designed by Dirk Hofmeister. Remarkable about the Urd is the handle. At first glance it might look a little strange. However, once you hold it you notice how ingenious this design is. Your fingers automatically fall into the grooves of the handle. You place your thumb on top of the blade in the cut-out. The knife will now properly be secured in hand and won't go anywhere. As a result you can safely use the Urd despite its size. The cleaver-style blade of the Urd is made from a 4.7 mm thick piece of D2-steel. A type of tool steel that is similar to stainless steel but can stain during long-term exposure to acids. The handle is made from black G10 and enhanced with a light texture for additional grip. The Urd is a robust neck knife, made to be used. So if you are looking for a solid neck knife that can definitely handle its own, the Urd is a great choice!
€32.21

Sold out

Hunting and Outdoor knife Helle Algonquin 78 6.9cm - 2
Sold out
Hunting and Outdoor knife Helle Algonquin 6.9cm 78
A beautiful and stout knife, the Algonquin is designed for self-reliance and freedom in the wild whether traversing from jungle to tundra or just sitting around the campfire with friends.
Handmade in Norway using darkened oak, curly birch and red leather inserts, the handle shape features a slight pommel at the end, as well as a small finger guard and thumb notch for maximum dexterity and superior handling. The 69 mm blade is made with Helle’s triple laminated stainless steel for unparalleled strength, sharpness and corrosion protection.
All Helle knives goes in individual boxes.
€96.77

Sold out

Neck knife MTech Karambit MT2033 5.5cm - 1
Sold out
Neck knife MTech Karambit 5.5cm MT2033
Small karambit.
€16.12

Sold out