Filtrer
Prix
€ €
Fabricants
Longueur des cordes, mm
Taille
Sex
Pays
Acier
Poignée
Série
Dureté
Etui
Verrouillage
Matériel
Filtrer
Gyuto Couteau Japonais Tsutomu Kajiwara TK-1122 18cm
Gyuto Couteau de cuisine Tsutomu Kajiwara 18cm TK-1122
Chef knife gyuto handmade by Tsutomu Kajiwara. Blade 180 mm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
149,19 €

En stock

Couteau Japonais Ittetsu Garasuki Shirogami IW11838 18cm
Couteau de cuisine Ittetsu Garasuki Shirogami 18cm IW11838
Couteau Garasuki Ittetsu à lame de 180 mm. Ce Garasuki est fabriqué à partir de trois couches de matériaux : du fer plaqué et de l'acier Shirogami. Une couche de fer de chaque côté protège une couche d'acier au carbone au cœur de la lame, selon un procédé appelé Sanmai ou soudage à la forge. Le fer et l'acier au carbone sont tous deux sensibles à la rouille et doivent être maintenus au sec et propres en permanence afin d'éviter l'oxydation et la décoloration. Le couteau Garasuki est conçu pour lever les filets de poulet, de poisson, de porc ou de bœuf. Évitez de couper les os, les aliments congelés, les noix, les bonbons durs et tout autre aliment que les fruits, les légumes et les protéines. Manche : noyer monobloc octogonal imperméable. Les couteaux Ittetsu sont fabriqués à la main à Echizen, au Japon. Lavage à la main à l'eau tiède et séchage à la serviette.
125,00 €

En stock

Gyuto Couteau Japonais Tojiro Powdered High Speed Steel F-518 18cm
Gyuto Couteau de cuisine Tojiro Powdered High Speed Steel 18cm F-518
This gyuto knife Tojiro F-518 has powdered high speed steel as core, clad by 13-chrome stainless steel. It is very sharp, excellent in wear resistance and edge retention. Reinforced laminated handle is very durable and tough, not easily deformed and strong against deterioration over time. Metal bolster is very hygienic and prevents stain and dirt from being accumulated between blade and handle.
183,87 €

En stock

Gyuto Couteau Japonais Daisuke Nishida Shirogami DN-11212 18cm
Gyuto Couteau de cuisine Daisuke Nishida Shirogami 18cm DN-11212
Japanese chef knife gyuto is handmade by Daisuke Nishida. Blade length 180 mm. Blade of this chef knife is made of Shirogami carbon steel. The whole is complemented by a handle made  of cherry wood  finished  with a plastic cap. The structure is extremely light and the D-shaped  handle perfectly fits the hand. Weight is 165 g. This  knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by Japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. Daisuke Nishida knives due to hand-made may slightly differ from the pictures and dimensions shown. 
120,97 €

En stock

Gyuto Couteau Japonais Goko Hamono Shirogami S/S Clad GHO-005 18cm
Gyuto Couteau de cuisine Goko Hamono Shirogami S/S Clad 18cm GHO-005
With an overall blade length of 18 cm, the Goko Hamono gyuto is the perfect knife for almost all of your daily cutting and chopping needs. It comes with a lovely rustic blade constructed of white #1 carbon with a cladding of stainless steel. The steel is hardened to 60-61 HRC. A lovely rustic finish and oak wood octagonal handle complete the package.
205,65 €

En stock

Santoku Couteau Japonais Takeshi Saji Damascus SG2 HB-5704 18cm
Santoku Couteau de cuisine Takeshi Saji Damascus SG2 18cm HB-5704
Handmade Japanese santoku kitchen knife by Mr. Takeshi Saji. Blade is damascus steel with SG2 cord. Blade length 18 cm. Rose Wood handle. Layered polywood ferrule. Avoid bones, frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins.
Takeshi Saji is a Chairman of Saji Balacksmith (Japan). Member of Japan Knife Guild and Japan Custom Knife Makers. In 1992, he was officially certified as Dentoukougeishi, a “Traditional Master Craftsman” by the Japanese “Ministry of International Trade & Industry”.
338,71 €

En stock

Santoku Japanese kitchen knife Miyabi 5000MCD 34374-181-0 18cm - 1
Santoku Couteau de cuisine Miyabi 5000MCD 18cm 34374-181-0
Zwilling Miyabi 5000MCD Santoku 18 cm. MIYABI knives epitomise the beauty of sharpness. The typical Japanese blade design and the outstanding sharpness of the MIYABI 5000MCD series turn these knives into precision instruments that leave nothing to be desired. They are perfect in function and ergonomics and the design is unique. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Manufactured by ZWILLING J.A. HENCKELS in its own factory in Seki, the traditional heart of the Japanese knife and sword industry, MIYABI knives unite German state-of-the-art technology with the knowledge of the old master craftsmen. It is therefore no coincidence that the unique Katana edge is reminiscent of the legendary Japanese swords. There are only best kitchen knives in MyGoodKnife’s range.
345,97 €

En stock

Couteau de cuisine universel Due Cigni Santoku 2C 419/18 AN 18cm
Couteau de cuisine Due Cigni Santoku 18cm 2C 419/18 AN
Due Cigni santoku knife with air pockets on blade is an excellent choice for professional and home use. Nitrogen blade has a perfect combination of quality and ease of cut greatly reducing the effort. Moreover, the presence of nitrogen allows a long life of the wire and great resistance to oxidation. The ergonomic Nylon handle can be easily disinfected.
26,61 €

En stock

Gyuto Japanese kitchen knife Tojiro VG10 Hammered F-1114 18cm
Gyuto Couteau de cuisine TOJIRO VG10 Hammered 18cm F-1114
Le couteau de chef Tojiro VG10 Hammered possède une lame de 18 cm. Cette lame est composée d'acier VG10 et d'une double couche (san mai) en acier inoxydable doux. Son poids est de 215 g. La gamme VG10 Hammered est l'une des plus populaires de Tojiro. L'acier VG10 est l'acier inoxydable le plus prisé dans la coutellerie japonaise. Développé par la société Takefu Specialty Steels, il est donc logique que la plupart des forgerons locaux l'utilisent.
100,81 €

En stock

Nakiri Couteau Japonais Ittetsu Shirogami IW11834 18cm
Nakiri Couteau de cuisine Ittetsu Shirogami 18cm IW11834
Couteau Nakiri Ittetsu à lame de 180 mm. La lame de ce nakiri est composée de trois couches de matériau : deux couches de fer plaqué et de l'acier Shirogami entre elles. Une couche de fer de chaque côté protège une couche d'acier au carbone au cœur, selon un procédé appelé Sanmai ou soudage à la forge. Le fer et l'acier au carbone sont tous deux sensibles à la rouille et doivent être maintenus secs et propres en permanence pour éviter l'oxydation et la décoloration. Évitez de mettre en contact la lame avec des os, des aliments congelés, des noix, des bonbons durs ou tout autre aliment que des fruits, des légumes et des protéines. Manche : noyer monobloc octogonal imperméable. Les couteaux Ittetsu sont fabriqués à la main à Echizen, au Japon. Lavage à la main à l'eau tiède et séchage à la serviette.
125,00 €

En stock

Santoku Japanese kitchen knife Miyabi 4000FC 33957-181-0 18cm - 1
Santoku Couteau de cuisine Miyabi 4000FC 18cm 33957-181-0
MIYABI 4000FC santoku, or Japanese chef’s knife, with an 18cm blade. Experience the beauty of sharpness with the MIYABI 4000FC series. The blade is made from a single layer of FC61 steel, a proven material in terms of hardness (HRC 61) and durability. - Fine carbide 61 steel blade construction for a sharp, hard blade; - Rockwell hardness of 61 for durability and cutting edge retention; - Katana style cutting edge for excellent sharpness; - FRIODUR® ice-hardened blade for toughness, elasticity and corrosion resistance; - Engraved MIYABI logo on the blade; - Octagonal pakka wood handle for comfortable grip with mosaic pin. - Made in Japan
153,22 €

Expédition après 10-20 jours ouvrables

Gyuto Japanese kitchen knife Tojiro Atelier TA-CH180 18cm - 1
Gyuto Couteau de cuisine TOJIRO 18cm TA-CH180
Gyuto knife Tojiro Forged with 180 mm balde. The gyuto is a Japanese designed chef’s knife. New especial series from Tojiro are hand forged by masters of Tojiro Atelier. This japanese kicthen knife has classic kitchen knife's handle made of reinforced laminated material. Unique damascus blade with black finish. Tojiro knives of this exclusive series are forged by hands, using same method as japanese swords traditionally were made.
316,13 €

En stock

Couteau ouzbeks en Pchak Ebonite Middle UZ1204MA 17.5cm
Couteau de cuisine Ebonite Middle 17.5cm UZ1204MA
Un pchak traditionnel de taille moyenne. Le manche est en ébène et corne d'argali, et la lame en acier ШХ15. La lame de ce couteau ouzbek mesure environ 180 mm de long. Disponible avec une bague décorative rouge ou verte. Veuillez préciser la couleur souhaitée dans les commentaires de commande. Un étui de transport jetable est inclus. Tous les pchaks présentés sur le site web sont fabriqués à la main ; de légères variations de taille et de couleur peuvent donc survenir.
104,03 €

En stock

Uzbek pchak knife Plastic Black UZ086EB 18cm - 1
Couteau de cuisine Plastic Brown 18cm UZ086EB
Slim Uzbek pchak knife with black Plastic handle. Blade lenght is 180 mm. Blade is made of carbon steel. Due to the fact that all knives are handcrafted, sizes may be slightly different from declared. Pchak knives are not allowed to wash in dishwasher. Pchak goes in disposable sheath.
52,41 €

En stock

Japanese kitchen knife Santoku Takeshi Saji Ebony HA-4804 18cm
Santoku Couteau de cuisine Takeshi Saji Ebony 18cm HA-4804
Japanese santoku handmade by Mr. Takeshi Saji. Blade - 31 layers nickel damaskus steel, VG10 core. Blade length 18 cm. Handle - ebony. Buffalo horn bolster. Weight of santoku knife by Takeshi Saji is 280 g.Takeshi Saji is a Chairman of Saji Balacksmith (Japan). Member of Japan Knife Guild and Japan Custom Knife Makers. In 1992, he was officially certified as Dentoukougeishi, a “Traditional Master Craftsman” by the Japanese “Ministry of International Trade & Industry”.
395,16 €

En stock

Deba Japanese kitchen knife Tojiro Aogami F-977 18cm - 1
Deba Couteau de cuisine Tojiro Aogami 18cm F-977
Tojiro Aogami Deba Knife with 180 mm blade. Blade is made from premium carbon steel Aogami, it has excellent sharpness and wear resistance. A bit of experience may necessary for re-sharpening, however holds very good edge retention. Handle made from Japanese magnolia wood, which has good water resistance and smooth surface. Water buffalo ferrule prevents blade from rattling and coming off. Affectionate back side with rounded edge. Weight of Tojiro Aogami Deba F-977 knife is 315 g. Deba is traditionally used to clean and fillet whole fish, but it is also commonly used for breaking down and dressing poultry and meats with small bones. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
308,87 €

En stock

Japanese kitchen knife Tojiro Shirogami Usuba F-919 18cm - 1
Couteau de cuisine Tojiro Shirogami Usuba 18cm F-919
Tojiro Shirogami Usuba knife with 18 cm blade. Core blade by Shirogami steel, outer layer by soft iron, it is easy to re-sharpen and has good edge retention. Single Bevel for Right-Handed. Handle is made from magnolia and has good water resistance. Weight of Tojiro Shirogami Usuba F-919 knife is 195g. The Usuba is ideal for cutting vegetables and fruits which are served raw, because the thin and sharp blade produces cut surfaces with very little cell damage, and this minimizes the discoloration and change in flavor often caused by oxidation. The relatively tall and long blade of the Usuba make it ideal for tackling large ingredients, such as cabbages, but it is not recommended for cutting vegetables or fruit with hard skins or hard stones, because they may damage the blade. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
110,48 €

En stock

Santoku Japanese kitchen knife Miyabi 7000D 34544-181-0 18cm - 1
Santoku Couteau de cuisine Miyabi 7000D 18cm 34544-181-0
Zwilling Miyabi 7000D Santoku 18 sm. - Blade of Zwilling Miyabi 7000D Santoku is made from steel with 65 layers and Damask design. - CRYODUR® blade, hardened in a specifically developed process (including ice-hardening at -196°C) for its extreme hardness. - Symmetric blades with an ultra-sharp Honbazuke honing. - The traditional “D-handle” allows tireless working in all cutting techniques. - Solid and easy-care Micarta handle of Zwilling Miyabi 7000D Santoku in fine wood texture, made from a multi-layered linen/resin compound in combination with stainless steel. There are only best kitchen knives in MyGoodKnife’s range.
225,00 €

Expédition après 10-20 jours ouvrables

Santoku Japanese kitchen knife Miyabi 6000MCT 34074-181-0 18cm - 1
Santoku Couteau de cuisine Miyabi 6000MCT Artisan 18cm 34074-181-0
The Santoku knife from the house of Miyabi has a sharpness of approximately 63 Rockwell and is suitable for cutting meat, fish and vegetables. The dark wooden handle is comfortable to hold thanks to its ergonomic shape, and allows effortless progress. The blade’s pattern, cutting properties, durability and toughness are impressive. The material used allows fast cleaning in the dishwasher.
The manufacturer has paid attention to an authentic Japanese blade profile, which is decorated with a hammered look. The core of the blade is made of micro carbide, wrapped with two layers of steel. Double-sided grinding and the Honbazuke edge of the blade perfects the sharpness of the 18 cm Miyabi Santoku knife.
The handle is made of tough dark cocobolo pakka wood. A goose neck curved handle allows easy working. There is also an individual counterbalance within the handle, so you can cut easily without exerting much force. The Santoku knife from the MIYABI 6000MCT range ensures fast, clean, precise cutting. This product delivers high quality with Japanese design and you will use it often.
- Blade core made of MicroCarbide MC63 powder steel embedded in 2 layers of steel. This provides a hardness of approx. 63 Rockwell. (International standard unit of measurement for hardness);- CRYODUR® ice-hardened blades provide particularly good cutting edge retention, corrosion resistance and optimum blade flexibility.- Authentic Japanese blade profile with Tsuchime look (hammered finish).- The symmetrical blade with ultra-sharp Honbazuke edge ensures incredible sharpness.- Dimensionally-stable pakka wood handle for perfect balance, outstanding comfort and fatigue-free cutting with all cutting techniques; sophisticated dark wood look.
225,00 €

Expédition après 10-20 jours ouvrables

Santoku Japanese kitchen knife Miyabi 5000MCD Rocking 34388-181-0 18cm - 1
Santoku Couteau de cuisine Miyabi 5000MCD Rocking 18cm 34388-181-0
Zwilling Miyabi 5000MCD Rocking Santoku 18 cm is the counterpart to the European chef's knife and universally applicable. It is suitable for mincing meat, vegetables and fish. The high, squat CRYODUR blade is sanded on both sides and was hardened in a specially developed process - making it particularly robust and sharp. The 18 cm long blade consists of a particularly hard MicroCarbide powder steel MC63 core surrounded by 100 layers of steel. It is processed with the classic Japanese Honbazuke trigger, resulting in a particular sharpness that glides effortlessly through ingredients. The Santoku's handle is made of Masur birch to give each knife a unique wood-grain pattern. An end cap and subtly styled mosaic pin complete the knife's elegant look. The handle is D-shaped to give the knife perfect balance and control for effortless and precision cutting. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Zwilling Miyabi 5000MCD Rocking Santoku made in Japan. There are only best kitchen knives in MyGoodKnife’s range.
345,97 €

En stock

Couteau de cuisine universel Zwilling J.A.Henckels Santoku 38408-181-0 18cm
Couteau de cuisine Zwilling J.A.Henckels Santoku 18cm 38408-181-0
This Santoku knife with scalloped kullen edge from the ZWILLING® Pro range is very versatile. The shape of this knife originated in Japan, the traditions of which are upheld in its making. The Santoku knife is exceptionally good for cutting fish and vegetables and is absolutely ideal if you want to attempt making your very own sushi. Although meat is not an ingredient traditionally found in Japanese cuisine, it has, nevertheless, found a place on the menu: the Santoku knife demonstrates its exceptional versatility and cuts this ingredient with equal ease. Each of these excellent qualities mean that you can use the knife to prepare exotic dishes from the Far East, as well as traditional European meals. The scalloped kullen distributed regularly along the blade prevent ingredients from sticking to the blade, which is particularly helpful when a very fine cut is required. This feature, in addition to the precision forged blade, means that it is easy to cut ingredients into wafer-thin slices. The knife is made even more versatile thanks to its 18 cm blade, which helps you to cut up both small and medium-sized ingredients. The specially developed steel also results in an exceptionally hard, highly flexible blade. Bring your culinary creativity to life with the Santoku knife from ZWILLING.
91,63 €

En stock

Santoku Japanese kitchen knife Takeshi Saji VG10, bull bone HA4604 18cm - 1
Santoku Couteau de cuisine Takeshi Saji VG10, bull bone 18cm HA4604
Couteau Santoku fabriqué à la main par M. Takeshi Saji. Lame : acier damassé 31 couches, VG10. Longueur de la lame : 18 cm. Manche : os de taureau. Mitre en laiton. Poids : 325 g. Le Santoku est un couteau de chef japonais polyvalent, conçu pour trancher, couper en dés et émincer. Takeshi Saji est président de Saji Balacksmith (Japon). Membre de la Japan Knife Guild et de Japan Custom Knife Makers. En 1992, il a été officiellement certifié Dentoukougeishi, « Maître artisan traditionnel », par le ministère japonais du Commerce international et de l'Industrie.
306,45 €

En stock

Utility kitchen knife Zwilling J.A.Henckels Pro Santoku 38407-181-0 18cm - 1
Couteau de cuisine Zwilling J.A.Henckels Pro Santoku 18cm 38407-181-0
The Santoku knife from the ZWILLING® Pro series combines Japanese cutting artistry with Made in Germany technology. The high-grade steel used for the blade and the easy-care plastic used in the handle will win you over. The knives have been elaborately produced to perform challenging tasks in complex operations. The SIGMAFORGE blades are precision-forged from a single piece of steel and boast perfect geometry and a precise cutting edge. The very best cutting properties, optimum balance, ergonomic design and safety make this knife the preferred cutting utensil of passionate cooking enthusiasts and professional chefs. The Santoku knife can be recognised by its typical wide blade shape and extremely sharp cutting edge.
Santoku literally translates as "three virtues", rapidly making this cutting implement indispensable in any kitchen. It is perfect for cutting, dicing and chopping and is also comfortable for newcomers to cooking to use. The knife's ease of handling and safe cutting enable you to produce delicate julienne strips from carrots, leeks and courgettes, or cut ultra-thin slices of meat to serve. The sharp, lightweight and well-balanced design of the Santoku knife lets you effortlessly cut the right thickness of vegetables, meat and fish. The Santoku knife has a 18 cm-long blade, which blends seamlessly into the striking handle with its traditional three-rivet design. Own your very own professional cutting utensil with this ZWILLING knife.
87,90 €

En stock

Couteau de cuisine universel Zwilling J.A.Henckels Santoku 36117-181-0 18cm
Couteau de cuisine Zwilling J.A.Henckels Santoku 18cm 36117-181-0
ZWILLING J.A. Henckels Gourmet Santoku, 18 cm. ZWILLING® Gourmet is the go-to knife for home chefs eager for their everyday knife to be exceptional. The single-piece, precision-stamped blade construction is lighter than forged knives, allowing for maximum maneuverability. Proudly crafted in Germany, the knives are made of special-formula steel that has been perfected for over 285 years. Combined with ZWILLING's signature ice-hardening technique, the blades are harder, sharper, they will not stain or chip and they retain their sharpness longer. The ergonomic, triple-riveted handle ensures fatigue-free cutting. Experience the comfort, durability, and sharpness of ZWILLING Gourmet.
54,98 €

En stock