Filtern nach
Preis
Marken
Klingenlänge, mm
Size
Sex
Land
Stahl
Griff
Serie
Härte
Messerscheide
Schlosstyp
Material
Filter
Sold out
Gyuto Küchenmesser Yu Kurosaki Fujin VG10 Damascus Keyaki 18cm ZVD-180CH
Yu Kurosaki Chef knife, 18 cm. Yu Kurosaki Fujin series fearture Nickel Damascus-patterned blades with a core of VG-10 stainless steel for professional with a hardness of 60-61 HRC, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Chef knife Fujin VG10 Damascus Series is made of Octagonal-shaped keyaki wood. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
237,90 €

Sold out

Sold out
Taschenmesser Spyderco Endura 4 violett 9.6cm C10FPPR
Das Endura 4 Lightweight Purple C10FPPR von Spyderco ist bei nur geringem Gewicht extrem belastbar. Es ist mit einem strukturiertem FRN-Griff und einem vierfach umsetzbarem Clip ausgestattet. Die rostfreie VG-10-Klinge wird von einem Backlock verriegelt.
96,77 €

Sold out

Sold out
Sujihiki Küchenmesser Tojiro Zen Black 21cm FD-1569
Die messer Tojiro Zen Black FD-1569 beidseitig angeschliffene Sushimesser eignet sich hervorragend zum Schneiden von Fischfilets. Die schlanke und schmale Klinge schneidet den Fisch mit einem einzigen langen, ziehenden Schnitt in feinste Scheiben. Es ähnelt dem europäischen Filetiermesser und kann auch als solches verwendet werden. Ein Sushimesser ist auch gut zum Zerteilen von größeren Fleischstücken geeignet. Die Klinge dieses Messers wird aus einem sogenannten 3-Lagen Stahl hergestellt. Als mittlere Lage wird der bewährte VG-10 (HRC 60 +/-1) Stahl eingesetzt. Ein kohlenstoffhaltiger Stahl, der der Schneide eine besonders lange Schnitthaltigkeit beschert. Dieser sehr harte Stahl wird von den äußeren, chromhaltigen Lagen geschützt. Dies ergibt einen Verbundstahl mit hoher Widerstandsfähigkeitund lang anhaltender Schärfe. Der Griff des Messers ist aus echtem, dunkelbraunem, gebranntem  Kastanienholz in Kastanienform gefertigt. Das bedeutet, dass der natürliche Griff an der rechten Seite eine leichte Kante hat. Diese sorgt dafür, dass er noch angenehmer und sicherer in der Handinnenfläche liegt.
111,29 €

Sold out

Sold out
Nakiri Küchenmesser TOJIRO Zen Black 16.5cm FD-1568
Das Tojiro Zen Black FD-1568 Nakiri-Messer hat eine 165 mm lange Klinge. Das Nakiri ist ein japanisches Küchenmesser zum Schneiden und Hacken, das vorwiegend für Gemüse verwendet wird. Die Klinge besteht aus einem VG-10-Stahlkern mit schwarz verchromten Stahleinlagen. Der traditionelle japanische ovale Griff aus Kastanienholz ist spülmaschinenfest und eignet sich zum Schneiden von Tiefkühlkost, Knochen und anderen sehr harten Lebensmitteln. Das Tojiro Zen Black FD-1568 Nakiri-Messer wiegt 145 g und wird in einer eleganten Markenverpackung geliefert.
127,49 €

Sold out

Sold out
Sujihiki Küchenmesser Mcusta Zanmai Coreless Aranami 24cm ZUA-1010C
Mcusta Zanmai  “coreless steel” series Sujihiki slicing knife with 24 cm blade. VG-10 and VG-2 are laminated together like Damascus steel. Literally there is no core of the steel, that's why this Mcusta kitchen knife series called "coreless". Also the blade patterns are remarkably clearer than on Damascus steel. Mcusta use  “ocean wave” motif which came from a traditional Japanese painting. Handle of Mcusta Zanmai Coreless Aranami Sujihiki knife is made of red pakka wood with a bolster and bottom cap. Mosaic pin on handle and bottom cap. Each knife Mcusta Zanmai Ultimate Coreless Aranami goes in wooden box.
394,35 €

Sold out

Sold out
Schere Mcusta Zanmai Damascus Fuji 8cm DDB-170F
Beautiful damascus scissors Fuji made in Japan in Seki in the handicraft from Mcusta. For the production was chosen one of the best Japanese steels, the VG10 clad in steel to 37 layers Damascus. Each scissor is hand assembled, finished, sharp and controlled by the artisans of the team Mcusta. Beautiful Fuji pattern. Due to the high hardness of the steel (Rockwell hardness of 59-60) these scissors stay sharp for a very long time. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives and scissors at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
176,61 €

Sold out

Sold out
Schere Mcusta Zanmai Damascus Sakura 8cm DDS-170D
Handgefertigte Schere von Mcusta Sakura. Klingenlänge: 80 mm, Gesamtlänge: 170 mm. Die Schere ist aus VG-10-Stahl gefertigt und mit Damastscheiden versehen. Sie wird in einer Holzbox geliefert.
MyGoodKnife ist autorisierter Händler von Marusho Industry Inc. Sehen Sie sich unser Interview mit Tomohiro Hasegawa, dem Präsidenten von Marusho Industry Inc., an, das anlässlich seines Besuchs im MyGoodKnife-Geschäft in Helsinki entstand.
214,34 €

Sold out

Sold out
Santoku Küchenmesser Tojiro Shippu Black 16.5cm FD-1597
Dieses santoku japanisches Tojiro Shippu Black FD-1597 165mm lange, aus 63 Lagen bestehende Messer ist ideal zum Schneiden von Fisch, Fleisch und Gemüse geeignet. Die breite Klinge des Sippu Black Santokus sorgt für eine spielend einfache Handhabung und kann auch als Palette benutzt werden.Die enorme Schärfe des Damast-Messer wird durch das Verschmieden unterschiedlicher Lagen erreicht. Im Kern wird eine extrem harte Schicht VG-10 Stahl (HRC 60+/-1) in mehrere Lagen mit unterschiedlich hohem Karbonanteil eingebettet. Dadurch wird ein Höchstmaß an Härte und Schnitthaltigkeit bei maximaler Flexibilität und Schneidkantenstabilität erreicht. Die dunkel schimmernde Klingenbeschichtung verleiht dem Messer eine ganz besondere, glänzende Optik. Der dunkelbraune in klassischer, japanischer Kastanienform gefertigte Griff ist aus echtem Kastanienholz gefertigt. Er fühlt sich sehr natürlich an und liegt auch nach lang anhaltenden Schneidarbeiten noch sehr leicht und angenehm in der Hand.Ausgeliefert wird es in einer schwarzbraunen, japanischen Geschenkverpackung aus Kartonage.
154,84 €

Sold out

Sold out
Schälmesser Küchenmesser Mcusta Zanmai Coreless Aranami 11cm ZUA-1001C
Mcusta Zanmai  “coreless steel” series Petty knife with 11 cm blade . VG-10 and VG-2 are laminated together like Damascus steel. Literally there is no core of the steel, that's why this Mcusta kitchen knife series called "coreless". Also the blade patterns are remarkably clearer than on Damascus steel. Mcusta use  “ocean wave” motif which came from a traditional Japanese painting. Handle of Mcusta Zanmai Coreless Aranami Petty knife is made of red pakka wood with a bolster and bottom cap. Mosaic pin on handle and bottom cap. Each knife Mcusta Zanmai Ultimate Coreless Aranami goes in wooden box.
201,61 €

Sold out

Sold out
Küchenmesser Mcusta Zanmai Classic Damascus 15cm HKC-3002D
Mcusta Zanmai Classic Petty utility knife. Blade lenght is 15 cm. The blade of Mcusta Zanmai Classic Petty knife is coated with 33 layers of Damascus steel and has a VG-10 core. The handle is made from Corian, a composite material that consists of 2/3 natural minerals and 1/3 acrylic with pigment.
120,16 €

Sold out

Sold out
Küchenmesser Mcusta Zanmai Coreless Aranami Petty 15cm ZUA-1002C
Mcusta Zanmai  “coreless steel” series Petty knife with 15 cm blade. VG-10 and VG-2 are laminated together like Damascus steel. Literally there is no core of the steel, that's why this Mcusta kitchen knife series called "coreless". Also the blade patterns are remarkably clearer than on Damascus steel. Mcusta use  “ocean wave” motif which came from a traditional Japanese painting. Handle of Mcusta Zanmai Coreless Aranami Petty knife is made of red pakka wood with a bolster and bottom cap. Mosaic pin on handle and bottom cap. Each knife Mcusta Zanmai Ultimate Coreless Aranami goes in wooden box.
233,87 €

Sold out

Sold out
Gyuto Küchenmesser Tojiro Home 20cm F-1303
Japanese Tojiro Home Chef knife Gyuto with 20 cm blade. This new Tojiro Home series is created to fulfill the requirements of modern life quality wise and design wise. Handle of Tojiro Home Chef knife F-1303 is made of blue/black mikarta. It hand carved and polished, comfortably fits in your hand. VG10 as core blade, covered by anti-rust 13 chrome stainless steel on both sides, which establish both professional sharpness and easy maintenance for home users. Edge is convex ground so that it has good balance of sharpness and durability, and easy to re-sharpen. Weight of Tojiro Home Chef knife F-1303 is 180 g.Please, use your Tojiro knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
124,19 €

Sold out

Sold out
Taschenmesser Spyderco Karahawk 5.7cm C170GBBKP
Das Spyderco Karahawk C170GBBKP ist ein spezielles Messer mit einer langen Familientradition. Seine Wurzeln hat es eindeutig in der südostasiatischen Region. Um das einhändige Öffnen der Klinge zu vereinfachen, ist das Messer mit dem patentierten WAVE-Mechanismus ausgestattet, der ein gleichzeitige Öffnen beim Ziehen aus der Hosentasche erlaubt. Die schwarz beschichtete Klinge aus VG-10 Stahl wird durch den Backlock gesichert. Die Griffschalen bestehen aus schwarzem, angenehm strukturiertem G10. Mit umsetzbarem Clip.
280,65 €

Sold out

Sold out
Gyuto Küchenmesser Ryusen Hamono Bonten Unryu 21cm BU304
The Bonten Unryu is one of the signature lines by Ryusen. It is considered as one of the best VG10 line by any Japanese maker, because of its unmatched artistics and more importantly, their VG10 blades are hande forged one-by-one. This Gyuto (Chef knife) Ryusen Hamono Bonten Unryu with japanese type handle. The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Gyuto  knife goes in black gift box.
258,06 €

Sold out

Sold out
Santoku Küchenmesser Ryusen Hamono Bonten Unryu 17.5cm BU307
The Bonten Unryu is one of the signature lines by Ryusen. It is considered as one of the best VG10 line by any Japanese maker, because of its unmatched artistics and more importantly, their VG10 blades are hande forged one-by-one. This Santoku Ryusen Hamono Bonten Unryu with japanese type handle.The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Santoku knife goes in black gift box.
217,74 €

Sold out

Sold out
Taschenmesser Mcusta Corian 8cm MC-0015
This Mcusta folding knife features a superior VG-10 steel blade. Handle is made of corian - acrilic stone. Comes in elegant original box. Mcusta creates custom quality production knives. Machine Custom = Mcusta. Located in Seki, Japan, the company holds an esteemed reputation for producing the finest Japanese folders.
MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives at our stores are original and made is Seki city, Japan.
Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
104,83 €

Sold out

Sold out
Santoku Küchenmesser Mcusta Zanmai Coreless Aranami 18cm ZUA-1003C
Mcusta Zanmai  “coreless steel” series Santoku with 18 cm blade. VG-10 and VG-2 are laminated together like Damascus steel. Literally there is no core of the steel, that's why this Mcusta kitchen knife series called "coreless". Also the blade patterns are remarkably clearer than on Damascus steel. Mcusta use  “ocean wave” motif which came from a traditional Japanese painting. Handle of Mcusta Zanmai Coreless Aranami Santoku is made of red pakka wood with a bolster and bottom cap. Mosaic pin on handle and bottom cap. Each knife Mcusta Zanmai Ultimate Coreless Aranami goes in wooden box.
293,89 €

Sold out

Sold out
Santoku Küchenmesser Mcusta Zanmai Classic Damascus 18cm HKC-3003D
Mcusta Zanmai Classic  Santoku. Santoku means 'Three Virtues' or 'To solve Three Problems'. The virtues or problems are slicing, dicing and mincing. The blade of Mcusta Zanmai Classic Santoku knife is coated with 33 layers of Damascus steel and has a VG-10 core. The handle is made from Corian, a composite material that consists of 2/3 natural minerals and 1/3 acrylic with pigment. Blade length: 18 cm
133,06 €

Sold out

Sold out
Nakiri Küchenmesser Mcusta Zanmai Coreless Aranami 16.5cm ZUA-1008C
Mcusta Zanmai “coreless steel” series Nakiri with 16.5 cm blade. VG-10 and VG-2 are laminated together like Damascus steel. Literally there is no core of the steel, that's why this Mcusta kitchen knife series called "coreless". Also the blade patterns are remarkably clearer than on Damascus steel. Mcusta use  “ocean wave” motif which came from a traditional Japanese painting. Handle of Mcusta Zanmai Coreless Aranami Nakiri is made of red pakka wood with a bolster and bottom cap. Mosaic pin on handle and bottom cap. Each knife Mcusta Zanmai Ultimate Coreless Aranami goes in wooden box.
294,35 €

Sold out

Sold out
Taschenmesser Mcusta Bamboo 7.2cm MC-0146
Mcusta's Bamboo folder is a great addition to Mcusta's gentleman knife collection. It has a classy look, but that doesn't mean it can't do the dirty work. The VG10 blade measures 2.75" and is opened using either of the thumb studs. Beautiful brushed satin Damascus steel bolsters sit between the blade and bamboo shaped African ebony wood handles. The Bamboo features a reversible pocket clip and comes with a black nylon belt sheath. Mcusta knives are made in Seki-City, Japan and are the pinnacle of synthesis between traditional Japanese craftsmanship and modern cutting edge technology.
213,70 €

Sold out

Sold out
Schälmesser Küchenmesser TOJIRO VG10 Hammered 9cm F-1110
Das schälmesser Tojiro VG10 Hammered F-1110 ein kleines Allzweckmesser für die kleinen und feinen Schneidarbeiten in der Küche! Die Klinge besteht aus einem 3 Lagen Stahl mit einer harten VG-10 Kernlage (60 HRC), die wiederum für die langanhaltende Schärfe (Schnitthaltigkeit) verantwortlich ist. Die äußeren Schichten bestehen aus rostfreiem, mit 13% Chrom legiertem Stahl welche mit einem dekorativen Hammerschlag-Finish (Tsuchime) und der Schmiedehaut (Kuro-uchi) veredelt wurden. Dieser weichere Stahl schützt die harte Kernschicht. Dies ergibt einen Verbundstahl mit hoher Widerstandsfähigkeit und lang anhaltender Schärfe. Dazu ist VG10 Stahl relativ leicht zu schleifen.Die Kastanienform des Griffes macht ihn auch für europäische Hände besonders ergonomisch. Der Griff wird aus japanischer Magnolie gefertigt.
59,67 €

Sold out

Sold out
Feststehendes Messer Tojiro Myoko 9.5cm HMHV-009
Tojiro Myoko is a handemade knife, made by blacksmiths of Tojiro Atelier. Blade is made of VG10 steel. Goes in with gift box. Leather sheath included.
149,19 €

Sold out

Sold out
Sujihiki Küchenmesser Mcusta Zanmai Classic Damascus 24cm HKC-3010D
Sujihiki Mcusta Zanmai Classic Damascus with 24cm blade. “Sujihiki” translates to “Flesh Slicer” and it does exactly what the name suggests, perfect for carving and slicing roasts, turkey, raw meats, fish, and all other proteins and the extended blade length allows you to slice with one long stroke, instead of sliding the knife back and forth in a sawing motion. Making clean slices of brisket or ultra thin applications like Carpaccio a breeze to execute. Mcusta Zanmai Classic features a beautiful 33-layer Damascus design, encased with a high quality 'super steel' VG-10 core for ultimate sharpness and long lasting edge retention. 61 Rockwell blades display hardness, toughness, and flexibility. The handle is made from Corian, a composite material that consists of 2/3 natural minerals and 1/3 acrylic with pigment. Blade length: 24 cm. Handcrafted in Seki city, Japan.
169,35 €

Sold out

Sold out
Schälmesser Küchenmesser Mcusta Zanmai Classic Damascus 11cm HKC-3001D
The Mcusta Zanmai Classic Petty knife is a robust peeler knife with white Corian handle. A knife for both professionals and home chefs. The blade of Mcusta Zanmai Classic Petty knife is coated with 33 layers of Damascus steel and has a VG-10 core. The handle is made from Corian, a composite material that consists of 2/3 natural minerals and 1/3 acrylic with pigment. Blade length: 11 cm
100,80 €

Sold out