Filtra per
Prezzo
€ €
Produttori
Lunghezza lama, mm
Dimensione
Sex
Paese
Acciaio
Maniglia
Collezione
Durezza
Fodero
Chiusura
Materiale
Filtro
Japanese kitchen knife Nakiri Yu Kurosaki Fujin VG10 Damascus ZVD-165NAOWQ 16.5cm
Sold out
Nakiri Coltello da cucina Yu Kurosaki Fujin VG10 Damascus 16.5cm ZVD-165NAOWQ
Yu Kurosaki Fujin series nakiri with Nickel Damascus-patterned blades with a core of VG-10 stainless steel. Hardness of 60-61 HRC provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Nakiri Fujin VG10 Damascus Series is made of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
290,32 €

Sold out

Nakiri Japanese kitchen knife Yu Kurosaki Raijin Forged Cobalt ZCS-165NAOWQ 16.5cm
Sold out
Nakiri Coltello da cucina Yu Kurosaki Raijin Forged Cobalt 16.5cm ZCS-165NAOWQ
Yu Kurosaki Raijin nakiri knife with 165 mm blade. The Nakiri is a double bevel edged knife is used as a vegetable slicer. The handle is made this time of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Raijin, the Japanese god of thunder is the inspiration Kurosaki-san used for the hand hammered pattern on these blades; evoking a "crack!" of lightning. Folds of Damascus steel play in contrast with that unique texture creating a stunning look. With a core of high quality Cobalt Special Steel that is able to take and hold an extremely sharp edge. Cobalt Special is registered trademark of Takefu Special Steel Co Ltd. It is super high grade steel, it containing lots of cobalt.
282,26 €

Sold out

Nakiri Japanese kitchen knife Zwilling J.A.Henckels Twin Fin II 30925-171-0 16.5cm
Sold out
Nakiri Coltello da cucina Zwilling J.A.Henckels Twin Fin II 16.5cm 30925-171-0
Comfortable nakiri Japanese kitchen knife Zwilling J.A.Henckels Twin Fin II 30925-171-0 is suitabl for chopping vegetables. The curved bolster acts as an extension of the hand and the ergonomic steel handle with gilled design is hygienic and exceptionally well balanced, promoting fatigue-free cutting even for the largest chopping tasksWith a FRIODUR ice-hardened blade made of Nitro 60 special formula stainless steel, these knives boast long-lasting durability. Made in Seki, Japan. Dishwasher safe.
87,90 €

Sold out

Bunka Japanese kitchen knife Yu Kurosaki Shizuku R2 Oak ZR-165BUOWQ 16.5cm
Sold out
Bunka Coltello da cucina Yu Kurosaki Shizuku R2 Oak 16.5cm ZR-165BUOWQ
Yu Kurosaki Shizuku Bunka knife with 165 mm blade. This Yu Kurosaki series features R2 tsuchime-finish blades. This bunka knife has an incredible level of finish and polish, with Kurosaki's signature "Shizuku" Tsuchime patterns that are both aesthetically pleasing and functional. The octagonal handle is made this time of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Wash and dry with a soft sponge, and safely store after use. Avoid cutting into bones, frozen foods, hard fruit pits. Recommended cutting surface: wood, rubberized boards and high-end composites, and quality plastics such as polyethene make acceptable cutting surfaces, and will help protect and prolong knife’s edge. Avoid glass, metal, countertops, and other rigid, non-forgiving surfaces. Yu Kurosaki works in Takefu Knife Village.
282,26 €

Sold out

Nakiri Japanese kitchen knife Yu Kurosaki Senko SG2 Oak wood ZSE-165NA 16.5cm
Sold out
Coltello da cucina Nakiri Yu Kurosaki Senko SG2 Oak wood 16.5cm ZSE-165NA
Yu Kurosaki Senko ZSE-165NA Nakiri knife with 165 mm blade. This Yu Kurosaki series features S/S Clad SG2 powdered steel tsuchime-finished blade. The blade surface has a unique hammered Senkou texture which represents Japanese fireworks. A really nice octagon handle made of oak. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
289,52 €

Sold out

Santoku Japanese kitchen knife Yu Kurosaki Senko SG2 Oak wood ZSE-165SA 16.5cm
Sold out
Santoku Coltello da cucina Yu Kurosaki Senko SG2 Oak wood 16.5cm ZSE-165SA
Yu Kurosaki Senkou Ei ZSE-165SA Santoku knife with 165 mm blade. This Yu Kurosaki series features S/S Clad SG2 powdered steel tsuchime-finished blade. The blade surface has a unique hammered Senkou texture which represents Japanese fireworks. A really nice octagon handle made of oak. Handmade by Mr. Yu Kurosaki.
289,52 €

Sold out

Santoku Coltello da cucina giapponese Yu Kurosaki Fujin VG10 Damascus Wenge ZVD-165SAW 16.5cm
Sold out
Santoku Coltello da cucina Yu Kurosaki Fujin VG10 Damascus Wenge 16.5cm ZVD-165SAW
Yu Kurosaki Santoku knife with wenge wood handle. Yu Kurosaki Fujin series fearture Nickel Damascus-patterned blades with a core of VG-10 stainless steel for professional with a hardness of 60-61 HRC, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Santoku Fujin VG10 Damascus Series is made of Octagonal-shaped wenge wood. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
215,32 €

Sold out

Nakiri Coltello da cucina giapponese Mcusta Zanmai Ultimate Unkai ZUU-1108D 16.5cm
Sold out
Nakiri Coltello da cucina Mcusta Zanmai Ultimate Unkai 16.5cm ZUU-1108D
Mcusta Zanmai Ultimate Unkai  Nakiri vegetable knife. Blade lenght is 165 mm. The blade of Mcusta Zanmai Ultimate Unkai  nakiri knife is made of of Damascus steel (VG-10), 33 layers. The handle is made of pakka wood with mosaic pin. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
258,06 €

Sold out

Bunka Coltello da cucina giapponese Yu Kurosaki Shizuku R2 Keyaki ZR-165BU 16.5cm
Sold out
Bunka Coltello da cucina Yu Kurosaki Shizuku R2 Keyaki 16.5cm ZR-165BU
Yu Kurosaki Shizuku Bunka knife with 165 mm blade.  This Yu Kurosaki series feartures R2 tsuchime-finish blades. This bunka knife has an incredible level of finish and polish, with Kurosaki's signature "Shizuku" Tsuchime patterns that are both aesthetically pleasing and functional. Octagon handle is made of keyaki wood. Wash and dry with a soft sponge, and safely store after use. Avoid cutting into bones, frozen foods, hard fruit pits. Recommended cutting surface: wood, rubberized boards and high-end composites, and quality plastics such as polyethene make acceptable cutting surfaces, and will help protect and prolong knife’s edge. Avoid glass, metal, countertops, and other rigid, non-forgiving surfaces. Yu Kurosaki works in Takefu Knife Village.
282,26 €

Sold out

Coltello da cucina giapponese Kenshiro Hatono Bunka VG10 Nickel Damascus, paper KH-P1 16.5cm
Sold out
Coltello da cucina Kenshiro Hatono Bunka VG10 Nickel Damascus, paper 16.5cm KH-P1
This bunka knife is handmade by Kenshiro Hatono. Blade 165 mm made of nickel damascus steel with VG10 core. Traditional handle made of japanese paper with lacquer. Kenshiro Hatono is a talanted knife maker. Currently he is working in Takefu knife village. This Japanese handmade knife is not allowed to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
201,61 €

Sold out

Santoku Coltello da cucina giapponese Yu Kurosaki Fujin R2 ZRF-165SA 16.5cm
Sold out
Santoku Coltello da cucina Yu Kurosaki Fujin R2 16.5cm ZRF-165SA
Fujin R2 Santoku is an excellent aesthetically and functionally, a versatile Japanese santoku knife handcrafted by master Yu Kurosaki. The octagon handle is made of water-resistant wenge wood and turquoise mineral, which are separated from each other by a silver ring. The 16.5 cm long blade has a unique hammered Tsuchime pattern on it and made of three-layer R2 steel. While making this series, Kurosaki was inspired by Fujin, the Shinto god of the wind, which can be seen in the forged pattern.
334,68 €

Sold out

Santoku Coltello da cucina giapponese Yu Kurosaki SPG2 Damascus Turquoise ZTQ-165SA 16.5cm
Sold out
Santoku Coltello da cucina Yu Kurosaki SPG2 Damascus Turquoise 16.5cm ZTQ-165SA
Amazing Yu Kurosaki Fujin SPG2 Hammered Damascus Turquoise Kiritsuke Santoku knife, 16,5 cm. Crafted with a beautiful full tang design using SPG2 core steel and finished with a sensational Western shaped turquoise handle, this is a real collectors knife and very difficult to find due to the limited numbers made. Weight of Yu Kurosaki SPG2 Damascus Turquoise ZTQ-165SA is about 230 g. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
491,94 €

Sold out

Nakiri Japanese kitchen knife Yu Kurosaki Fujin Super Aogami ZAF-165NA 16.5cm
Sold out
Nakiri Coltello da cucina Yu Kurosaki Fujin Super Aogami 16.5cm ZAF-165NA
Nakiri khife Fujin Aogami Super series handmade by Mr. Yu Kurosaki. Nakiri has a straight, symmetrical edge that is most commonly used for slicing, dicing, and chopping vegetables. Stainless steel clad. Padoauk handle with turquoise ring. Blade length is 16,5 cm. Weight is about 150 g. Kurosaki-san was inspired by Fujin, the god of Wind in Japanese mythology for the design of these knives. He's done a remarkable job of capturing the essence of the God of wind in the Tsuchime (hand hammered) finish on these knives.
213,71 €

Sold out

Santoku Coltello da cucina giapponese Gihei Hamono Aogami 2 Iron clad GH-502 16.5cm
Sold out
Santoku Coltello da cucina Gihei Hamono Aogami 2 Iron clad 16.5cm GH-502
Japanese kitchen knife santoku by Gihei Hamono. Blade is made of Aogami 2 steel with iron clad. Aogami #2 by Hitachi sometimes called Blue Paper #2 since the steel is wrapped in blue paper. It has a very good edge sharpness and excellent edge retention. This Gihei Hamono santoku has a handle of baked magnolia. Never wash any Japanese knife in a dishwasher. This knife has a thin blade and should not be used on hard items such as bones or frozen foods.
120,97 €

Sold out

Coltello da cucina giapponese Santoku Gihei Hamono SLD GH-302 16.5cm
Sold out
Coltello da cucina Santoku Gihei Hamono SLD 16.5cm GH-302
Japanese kitchen knife santoku by Gihei Hamono. The Santoku is the Japanese version of the chef's knife. Blade is made of SLD steel.  SLD stainless steel was originally designed by Hitachi for cutting other steels. It holds an edge as long as a carbon steel, but is much easier to care for. The base of the steel is SKD11 with hardness up to 61-63HRC. This Gihei Hamono santoku has a handle of magnolia. Never wash any Japanese knife in a dishwasher. This knife has a thin blade and should not be used on hard items such as bones or frozen foods.
128,23 €

Sold out

Santoku Coltello da cucina giapponese Kajibe KJB-001 16.5cm
Sold out
Santoku Coltello da cucina Kajibe 16.5cm KJB-001
Kajibe santoku knife with blade length 165 mm. Traditional Japanese chestnut handle. Blade of this Kajibe santoku knife is made of Aogami #2 iron clad steel. Kajibe knives are hand-forged by master blacksmith Kunio Ishikawa and his son. This santoku knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
141,13 €

Sold out

Santoku Japanese kitchen knife Tojiro Shippu Black FD-1597 16.5cm
Sold out
Santoku Coltello da cucina TOJIRO Shippu Black 16.5cm FD-1597
Tojiro Shippu Black DP Damascus Steel Santoku with 165mm blade. By forging steel of two different hardness over and over, elegant ripple pattern emerges and high uniformity of core steel VG10 eventually generate maximum sharpness. Black oxide processing, which is the technology often used for medical equipment, has been applied on blade. The blade thus has both outstanding corrosion resistance and beautiful visual aspect. Chestnut handle has excellent durability, and additionally applied fire treatment on surface makes it even stronger.
154,84 €

Sold out

Coltello da cucina giapponese Shiro Kamo Kama-Usuba G-0104 16.5cm
Sold out
Coltello da cucina Shiro Kamo Kama-Usuba 16.5cm G-0104
Kama-Usuba knife is handmade by Shiro Kamo. Blade lenght is 165 mm. Traditional Japanese octagonal handles in rosewood. Blade is made of Shirogami steel, 11 layers. This japanese knife is not allowed to wash by dishwasher. Knife by mr. Shiro Kamo has very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. The smith Shiro Kamo crafts his blades in the Takefu Knife Village. Shiro Kamo, born in 1958, was honored for his skill with the famous Japanese title "Dento-Kogei-shi" at age 45 (Master of Traditional Craft). Currently, he is President of the Takefu Knife Village Association.
160,48 €

Sold out

Coltello da cucina giapponese Nakiri Ittetsu Shirogami IW1185 16.5cm
Sold out
Coltello da cucina Nakiri Ittetsu Shirogami 16.5cm IW1185
Japanese Nakiri vegetable knife Ittetsu with 165 mm blade. This nakiri is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
116,94 €

Sold out

Coltello da cucina giapponese Santoku Ittetsu Shirogami IW1184 16.5cm
Sold out
Coltello da cucina Santoku Ittetsu Shirogami 16.5cm IW1184
Santoku knife Ittetsu with 165 mm blade. This santoku is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. The word santoku translates to three virtues which refers to slicing, dicing and chopping or meat, fish and vegetables depending on who you ask. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. 
108,87 €

Sold out

Coltello da caccia 306 - United Cutlery Gil Hibben Legacy Ulu GH5074 16.5cm
Sold out
Coltello Fisso 306 - United Cutlery Gil Hibben Legacy Ulu 16.5cm GH5074
Knife Masters Gil and Wes Hibben continue to put out innovative designs, which become legends in their own right! The Hibben Legacy Ulu Knife is a sleek and modern reimagining of the traditional ulu knife, used since ancient times. The 6 1/2” 5Cr15 stainless steel blade has a mirror polished finish that provides a striking contrast to the black pakkawood handle scales, which are secured by stainless steel pins. As attractive and visually pleasing as the Hibben Legacy Ulu Knife is, it is definitely no display piece! The wide and beefy blade is keenly sharp, allowing you to put it up against any slicing or cutting task whether it’s at home or on the hunt. The ulu knife is protected by a black leather belt sheath with an embossed Hibben logo and a secure snap closure. This is an absolute must-have for your Hibben collection! 
57,25 €

Sold out

Santoku Japanese kitchen knife Kenshiro Hatono Red lacquer HRS 16.5cm - 1
Sold out
Santoku Coltello da cucina Kenshiro Hatono Red lacquer 16.5cm HRS
Santoku knife handmade by Kenshiro Hatono. Blade 165 mm made od damascus steel with VG10 core. Traditional handle made of red lacquer. Kenshiro Hatono is a knife maker from Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
167,74 €

Sold out

Santoku Japanese kitchen knife Kenshiro Hatono Black lacquer HBS 16.5cm - 1
Sold out
Santoku Coltello da cucina Kenshiro Hatono Black lacquer 16.5cm HBS
Japanese santoku knife handmade by Kenshiro Hatono. Blade 165 mm made od damascus steel with VG10 core. Black lacquer handle. Kenshiro Hatono is a knife maker from Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
167,74 €

Sold out

Nakiri Japanese kitchen knife Tojiro Atelier TA-VE165 16.5cm - 1
Sold out
Nakiri Coltello da cucina TOJIRO Atelier 16.5cm TA-VE165
Special japanese Nakiri knife Tojiro Forged with 165 mm balde. A nakiri knife, also known as a nakiri bocho, is a Japanese-style knife used for chopping vegetables. New exclusive series from Tojiro are hand forged by masters of Tojiro Atelier. This nakiri knife has classic kitchen knife's handle made of reinforced laminated material. Unique damascus blade with black finish. Tojiro knives of this exclusive series are forged by hands, using same method as japanese swords traditionally were made.
316,13 €

Sold out