Santoku Messer

Filtern nach
Preis
€ €
Marken
Klingenlänge, mm
Land
Stahl
Griff
Serie
Härte
Filter
Santoku Japanisches Messer Gihei Hamono SLD GH-302 16.5cm
Sold out
Santoku Japanisches Messer Gihei Hamono SLD 16.5cm GH-302
Japanese kitchen knife santoku by Gihei Hamono. The Santoku is the Japanese version of the chef's knife. Blade is made of SLD steel.  SLD stainless steel was originally designed by Hitachi for cutting other steels. It holds an edge as long as a carbon steel, but is much easier to care for. The base of the steel is SKD11 with hardness up to 61-63HRC. This Gihei Hamono santoku has a handle of magnolia. Never wash any Japanese knife in a dishwasher. This knife has a thin blade and should not be used on hard items such as bones or frozen foods.
128,23 €

Sold out

Santoku Japanisches Messer Kunio Masutani M-3241 17cm
Sold out
Santoku Japanisches Messer Kunio Masutani 17cm M-3241
Kunio Masutani Santoku knife with 17 cm blade. Santoku means “three virtues” or “three uses”: slicing, dicing, and mincing. You can cut fish, meat and vegetables with the Santoku. However, it is particularly suitable for vegetables due to the rather flat cutting edge profile. The very sharp, rustproof blades are ground on both sides and consist of a Damascus steel construction with a robust VG-10 core with a hardness of 61-63HRC. The black handle is made of pakka wood. Not allowed to wash in dishwasher.
87,90 €

Sold out

Santoku Japanisches Messer Takeshi Saji Damascus SG2 HB-5704 18cm
Sold out
Santoku Japanisches Messer Takeshi Saji Damascus SG2 18cm HB-5704
Handmade Japanese santoku kitchen knife by Mr. Takeshi Saji. Blade is damascus steel with SG2 cord. Blade length 18 cm. Rose Wood handle. Layered polywood ferrule. Avoid bones, frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins.
Takeshi Saji is a Chairman of Saji Balacksmith (Japan). Member of Japan Knife Guild and Japan Custom Knife Makers. In 1992, he was officially certified as Dentoukougeishi, a “Traditional Master Craftsman” by the Japanese “Ministry of International Trade & Industry”.
338,71 €

Sold out

Santoku Japanisches Messer Kunio Masutani VG-1 Damascus Walnut M-2761 17cm
Sold out
Santoku Japanisches Messer Kunio Masutani VG-1 Damascus Walnut 17cm M-2761
Kunio Masutani Santoku knife with 17 cm blade. Santoku means “three virtues” or “three uses”: slicing, dicing, and mincing. You can cut fish, meat and vegetables with the Santoku. However, it is particularly suitable for vegetables due to the rather flat cutting edge profile.The very sharp, rustproof blades are ground on both sides and consist of a Damascus steel construction with a robust VG-1 core with a hardness of 60HRC. The octagon-shaped handle is made of walnut wood and is equipped with a clamp made of pakka wood. Not allowed to wash in dishwasher.
120,97 €

Sold out

Santoku Japanisches Messer Miyabi 5000MCT MIZU 32917-181-0 18cm
Sold out
Santoku Japanisches Messer Miyabi 5000MCT MIZU 18cm 32917-181-0
Miyabi MIZU 5000MCT Santoku Japanisches Kochmesser MIZU 32917-181-0 ist mit seinen 18 cm Länge ideal zum Schneiden und Hacken von Gemüse, Kräutern, aber auch Fleisch, Fisch und anderen Produkten geeignet. Diese Serie 5000MCT hat einen Kern aus MC 63, Mikrokarbidpulver (63 HRC), der mit 2 Schichten eisgehärtetem Cryodur-Edelstahl überzogen ist. Schneide hat einen Winkel von 19°. Gehämmerte Oberfläche (Tsuchime), die verhindert, dass Lebensmittel an der Klinge haften bleiben, und ergonomischer Griff aus Micarta. Es wird empfohlen, nur von Hand zu waschen, auf einem Schleifstein zu pflegen und zu schärfen, und die Verwendung von Glas-, Keramik- oder Steinschneidebrettern sollte vermieden werden. Hergestellt in Seki, Japan.
225,00 €

Sold out

Santoku Japanisches Messer Kajibe KJB-001 16.5cm
Sold out
Santoku Japanisches Messer Kajibe 16.5cm KJB-001
Kajibe santoku knife with blade length 165 mm. Traditional Japanese chestnut handle. Blade of this Kajibe santoku knife is made of Aogami #2 iron clad steel. Kajibe knives are hand-forged by master blacksmith Kunio Ishikawa and his son. This santoku knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
141,13 €

Sold out

Santoku Japanisches Messer Sukenari Aogami Super S-410 19cm
Sold out
Santoku Japanisches Messer Sukenari Aogami Super 19cm S-410
Sukenari santoku knife with blade length 190 mm. Traditional Japanese octagonal magnolia handle. Blade of this Sukenari knife is made of 3 Layered S/S Clad Aogami Super. This santoku knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
254,03 €

Sold out

Santoku Japanisches Messer Yoshimi Kato Ginsan D-702CW 17cm
Sold out
Santoku Japanisches Messer Yoshimi Kato Ginsan 17cm D-702CW
Santokumesser mit satinierter Ginsanklinge von Yoshimi Kato. Yoshimi Kato verwendet Ginsan- oder Silber-3-Stahl als Hauptelement dieser Klingenlinie. G3-Stahl ist bekannt für seine hervorragenden Kanteneigenschaften. Klingenlänge 170 mm. Griff - Kirschholz. Für Santoku Yoshimi Kato Ginsan empfohlene Handwäsche mit warmem Wasser und Handtuchtrocknung. Vermeiden Sie Knochen, Tiefkühlkost, Nüsse und Hartbonbons oder etwas anderes als Obst, Gemüse und Eiweiß.
197,58 €

Sold out

Santoku Japanese kitchen knife Mcusta Supreme Ripple Damascus TZ2-4003DR 18cm - 1
Sold out
Santoku Japanisches Messer Mcusta Zanmai Supreme Ripple Damascus 18cm TZ2-4003DR
Mcusta Zanmai Supreme Ripple Damascus Santoku with 18 cm blade. Weight is 169 g. Mcusta Supreme Ripple Damascus series feature 33 layers of Damascus-patterned blades with a core of high carbon VG-10 stainless steel, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness.In addition, the unique Ripple pattern is originally created by the Zanmai technology, which you may never find it in the world.The design represents ocean and shore line. It's associated with a Japanese traditional picture in the Edo era.MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives and scissors at our stores are original and made is Seki city, Japan.Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
152,41 €

Sold out

Santoku Japanisches Messer Tojiro Shippu Black FD-1597 16.5cm
Sold out
Santoku Japanisches Messer Tojiro Shippu Black 16.5cm FD-1597
Dieses santoku japanisches Tojiro Shippu Black FD-1597 165mm lange, aus 63 Lagen bestehende Messer ist ideal zum Schneiden von Fisch, Fleisch und Gemüse geeignet. Die breite Klinge des Sippu Black Santokus sorgt für eine spielend einfache Handhabung und kann auch als Palette benutzt werden.Die enorme Schärfe des Damast-Messer wird durch das Verschmieden unterschiedlicher Lagen erreicht. Im Kern wird eine extrem harte Schicht VG-10 Stahl (HRC 60+/-1) in mehrere Lagen mit unterschiedlich hohem Karbonanteil eingebettet. Dadurch wird ein Höchstmaß an Härte und Schnitthaltigkeit bei maximaler Flexibilität und Schneidkantenstabilität erreicht. Die dunkel schimmernde Klingenbeschichtung verleiht dem Messer eine ganz besondere, glänzende Optik. Der dunkelbraune in klassischer, japanischer Kastanienform gefertigte Griff ist aus echtem Kastanienholz gefertigt. Er fühlt sich sehr natürlich an und liegt auch nach lang anhaltenden Schneidarbeiten noch sehr leicht und angenehm in der Hand.Ausgeliefert wird es in einer schwarzbraunen, japanischen Geschenkverpackung aus Kartonage.
154,84 €

Sold out

Santoku Japanisches Messer Ittetsu Shirogami IW1184 16.5cm
Sold out
Santoku Japanisches Messer Ittetsu Shirogami 16.5cm IW1184
Santoku knife Ittetsu with 165 mm blade. This santoku is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. The word santoku translates to three virtues which refers to slicing, dicing and chopping or meat, fish and vegetables depending on who you ask. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. 
108,87 €

Sold out

Santoku Japanisches Messer Ittetsu Shirogami IW11833 18cm
Sold out
Santoku Japanisches Messer Ittetsu Shirogami 18cm IW11833
Santoku knife Ittetsu with 18 cm blade. The word santoku translates to three virtues which refers to slicing, dicing and chopping or meat, fish and vegetables depending on who you ask. Blade is made of Shirogami Iron Clad steel. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. 
116,94 €

Sold out

Santoku Japanese kitchen knife Kenshiro Hatono Red lacquer HRS 16.5cm - 1
Sold out
Santoku Japanisches Messer Kenshiro Hatono Red lacquer 16.5cm HRS
Santoku knife handmade by Kenshiro Hatono. Blade 165 mm made od damascus steel with VG10 core. Traditional handle made of red lacquer. Kenshiro Hatono is a knife maker from Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
167,74 €

Sold out

Santoku Japanese kitchen knife Kenshiro Hatono Black lacquer HBS 16.5cm - 1
Sold out
Santoku Japanisches Messer Kenshiro Hatono Black lacquer 16.5cm HBS
Japanese santoku knife handmade by Kenshiro Hatono. Blade 165 mm made od damascus steel with VG10 core. Black lacquer handle. Kenshiro Hatono is a knife maker from Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
167,74 €

Sold out

Santoku Japanese kitchen knife Tojiro Shippu Special TSSS 16.5cm - 1
Sold out
Santoku Japanisches Messer Tojiro Shippu Special 16.5cm
New! Limited edition of Tojiro Shippu series. Santoku with 165 mm blade. Unlike usual Shippu series knives, this has 95 layered Damascus Steel blade with a VG-10 core. Oak wood handle. This Shippu Special Santoku has buffalo horn bolster.
144,35 €

Sold out

Santoku Japanese kitchen knife Mcusta Revolution SPG2 ZRB-1203G 18cm - 1
Sold out
Santoku Japanisches Messer Mcusta Zanmai Revolution SPG2 18cm ZRB-1203G
The Mcusta Zanmai Revolution SPG2 Santoku is a fantastic japanese chef's knife with a very thin 3-layer steel blade and SPG2 core, a japanese powder steel known for excellent resistance to wear and corrosion. Hardness level is 61HRC with an amazingly lasting sharpness. The soft line between the side supporting steel and the core steel makes an incredibly beautiful blade with design reminding of japanese swords. Revolution has an ergonomic soft, bent handle compared to many other models from japanese Zanmai. The beautifully designed handle of black pakka wood lies perfectly in the hand and gives a firm and steady grip. Blade length: 18 cm. Full length: 34 cm. Weight: 166 gram.
193,54 €

Sold out

Santoku Japanese kitchen knife Ryusen Hamono Bonten Unryu BU307 17.5cm - 1
Sold out
Santoku Japanisches Messer Ryusen Hamono Bonten Unryu 17.5cm BU307
The Bonten Unryu is one of the signature lines by Ryusen. It is considered as one of the best VG10 line by any Japanese maker, because of its unmatched artistics and more importantly, their VG10 blades are hande forged one-by-one. This Santoku Ryusen Hamono Bonten Unryu with japanese type handle.The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Santoku knife goes in black gift box.
217,74 €

Sold out

Santoku Japanese kitchen knife Mcusta Forest HBG-6003M 18cm - 1
Sold out
Santoku Japanisches Messer Mcusta Zanmai Forest 18cm HBG-6003M
Japanese kitchen knife Mcusta Zanmai Forest Santoku with 180 mm blade. Mcusta Zanmai Forest Molybdenum Series is a great introduction to high quality Japanese knives. For this series, Zanmai forges each blade using Molybdenum Vanadium 8A steel and sharpens them utilizing Zanmai's famous Hamaguri V-Cut form. This grinding method results in incredibly sharp knives that are easy to use and maintain. The handle’s end caps are mirror finished and provide additional balance. The beautiful green micarta hangles are triple-riveted to complete this professional quality knife at an affordable price. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives and scissors at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
92,74 €

Sold out

Santoku Japanese kitchen knife Mcusta Coreless Aranami ZUA-1003C 18cm - 1
Sold out
Santoku Japanisches Messer Mcusta Zanmai Coreless Aranami 18cm ZUA-1003C
Mcusta Zanmai  “coreless steel” series Santoku with 18 cm blade. VG-10 and VG-2 are laminated together like Damascus steel. Literally there is no core of the steel, that's why this Mcusta kitchen knife series called "coreless". Also the blade patterns are remarkably clearer than on Damascus steel. Mcusta use  “ocean wave” motif which came from a traditional Japanese painting. Handle of Mcusta Zanmai Coreless Aranami Santoku is made of red pakka wood with a bolster and bottom cap. Mosaic pin on handle and bottom cap. Each knife Mcusta Zanmai Ultimate Coreless Aranami goes in wooden box.
293,89 €

Sold out

Santoku Japanese kitchen knife Mcusta Classic Damascus HKC-3003D 18cm - 1
Sold out
Santoku Japanisches Messer Mcusta Zanmai Classic Damascus 18cm HKC-3003D
Mcusta Zanmai Classic  Santoku. Santoku means 'Three Virtues' or 'To solve Three Problems'. The virtues or problems are slicing, dicing and mincing. The blade of Mcusta Zanmai Classic Santoku knife is coated with 33 layers of Damascus steel and has a VG-10 core. The handle is made from Corian, a composite material that consists of 2/3 natural minerals and 1/3 acrylic with pigment. Blade length: 18 cm
133,06 €

Sold out

Santoku Japanese kitchen knife Tojiro SD Mol. Van. F-882 17cm - 1
Sold out
Santoku Japanisches Messer Tojiro SD Mol. Van. 17cm F-882
Tojiro SD Molybdenum Vanadium Steel Series. Sticking to sharpness, the edge satisfies even professionals. Tojiro has more than 5 manufacturing process for edging on this series and are willing to spend a lot of time. Usually, durability is required for business-use, however, “Tojiro” have been pursuing the sharpness and studying edging and structure of a blade for a long time. This is one of a reason that many professionals use “Tojiro” as their favorite knife all over the world.
44,35 €

Sold out

Santoku Japanese kitchen knife Tojiro Teflon FA-87 16.5cm - 1
Sold out
Santoku Japanisches Messer Tojiro Teflon 16.5cm FA-87
Original teflon knife.
16,12 €

Sold out