Darex (Work Sharp) Sharpeners and accessories

 Three replacement belts Böker 09DX284  with a grit of 220. The abrasive belts are exclusively for use with the Blade Grinding Attachment of the Work Sharp Knife & Tool Sharpener Ken Onion Edition. Made in Germany.

1 belt each ( 3/4" x 12") in grits P120, X65 (= P220), X22 (= P1000), X4 (= P3000), and P6000 in ½" x 12". The abrasive belts are exclusively for use with the Work Sharp Knife & Tool Sharpener Ken Onion Edition.

Grinder belt kit with one belt each (1" x 18") in grits P120, X65, X22, X4, P12.000 micro-mesh, exclusively for use with the blade grinder attachment ( Only compatible with the blade grinding attachment).

The fabric strop replaces the previous leather strop and ensures the ultimate finish of the blade. The kit contains 2x Norton fabric strops (18"), 1x iron-oxide grinding paste (red), 1x ultra-fine chrome-oxide grinding paste (green) and an English user manual. Only compatible with the blade grinding attachment.

Main belt for Work Sharp Ken Onion Edition.

This one of the best knife sharpeners was created in close cooperation with the US custom knife maker, Ken Onion. Dimensions (operational mode) 250 x 150 x 140. Shipped with grinding belt kit P120, X65 (equivalent to P220), X22 (equivalent to P1000), X4 (equivalent to P3000), P6000. 220V power supply.

The overwhelming success of the Worksharp knife and tool sharpeners impressively documents the ability of US-based Darex to generate new ideas and innovations for the development of knife sharpeners. The GSS ("Guided Sharpening System") now allows Darex to tap into the manual sharpening system segment. And Darex would not be Darex if this did not involve blazing completely new paths. In addition to the angle guide typical for Darex, the special features of the GSS also include a sharpening surface that has a pivot response along the length axis. This has the unique advantage that the user does not need to adjust the holding angle to the angle of the edge while guiding the blade. The blade is instead always held at a right angle to the sharpening direction irrespective of the edge angle, because the pivoting sharpening stone independently and automatically follows the edge angle. This dramatically simplifies handling since the straight line motion allows the edge angle to be held constant with much greater ease than on a rigid system, which requires the user to track the edge angle. Even less experienced users can therefore create a razor-sharp edge. When required, the sharpening stone can also locked, therefore deactivating the pivot mechanism. Rubber feet for proper stability. Exchangeable diamond stones in 2 grits (320 and 600) for roughing and finishing. Additional ceramic insert with 3 surfaces (fine, coarse, groove) for recurve blades, serrations, etc. Angle ramps with 17° and 20° provide a fixed starting position for sharpening. The angle ramps and sharpening stones are exchanged in seconds without tools. 42 year manufacturer warranty (excluding replacement parts). Suited for all types of knifes, axes, chisels, and other tools, as well as fishing hooks, and much more. LxWxH: 220 mm x 60 mm x 58 mm. Sharpening surface: 151 mm x 32 mm. Weight 559 g

The combination of easy operation, which requires basically no prior sharpening experience, with an excellent professional sharpening result is the philosophy of Darex, which has clearly raised the bar for sharpening systems with the Knife and Tool Sharpener. The new Combo Knife Sharpener is even more oriented towards ease of use. The blade guide with predetermined grinding angle, only one kind of grinding belt, and a pre-set belt speed make any guesswork or adjustments redundant. It makes it easy and fast to sharpen any kind of knife, from kitchen knives and pocket knives to hunting and outdoor knives. The grinding belt is used for pre-grinding, and the fine honing and sharpening of serrations is performed using the integrated ceramic grinding rod, which also comes with a default angle. Rubber feet ensure a safe stance. Includes 2 grinding belts (P120).

Bulk pack 6000 abrasive belts (6 belts) for the Original and Ken Onion Edition Work Sharp Knife & Tool Sharpener.

Contains six P220 abrasive belts for the WSKTS. Intended for light shaping and sharpening applications. Produces a toothy cutting edge for long life utility applications.

Professional knife makers use flexible belts to put a razor sharp edge on their blades, and now you can have the same technology at home to use any time your knives get dull. You may already have other sharpening methods, but never before has a knife sharpener been able to quickly and easily sharpen this broad range of knives to such extremely sharp results.

The Work Sharp® Knife & Tool Sharpener is also able to sharpen other common tools including scissors, axes and hatchets, mower blades, garden shears, shovels, and just about any tool with a blade. Can even sharpen ceramic blades, when used with a diamond abrasive belt (models 09DX014 and 09DX015). The versatility of the Knife & Tool Sharpener makes it an invaluable tool for keeping all your blades in razor sharp condition and ready whenever you need them.

Includes abrasive belt kit (P80, P220 and 6000), kitchen guide, outdoor knife guide, instructional DVD and user manual.