Tojiro Knives

Filter by
Categories
Price
€ €
Country
Steel
Handle
Blade Length, mm
Collection
Hardness
Sheath
Filter
Cutting board Tojiro Paulownia Small F-344 - 1
Cutting board Tojiro Paulownia Small F-344
Because paulownia is hard to soak up water, it never sinks inside of the wood. It also dries within just 10 minutes after washing and never turns black or rots that usually happen to the other wooden cutting boards. Cutting board series using paulownia wook from Kamo city in Niigata where is very famous for paulownia chests of drawers. The lightness and hygiene offers much more advantages than the other woods and it is the best material for cutting board thinking about edge of knife. 270×190x20mm. Weight-0,285 kg. 
€25.80

In stock

Bread knife Tojiro Pro ”Service en Salle” FD-711 21.5cm
Kitchen knife Tojiro Pro ”Service en Salle” 21.5cm FD-711
This series is for professional Gueridon Service people developed by corporation of Mr. Toshikazu Fukuoka, chief instructor of FFCC (French Food Culture Center). AlsoAssociation des Maitres de Service recommends.It is first trial in the world. It realizes “fascinating service” and necessary for the service.
€100.80

In stock

Gyuto Japanese kitchen knife Tojiro Hammered Black F-1092 24cm - 1
Gyuto Kitchen knife TOJIRO Hammered Black 24cm F-1092
Tojiro Japanese hand forged chef knife. Blade length is 24 cm. Blade is made of carbon steel, wa handle is made of magnolia wood. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
€153.22

In stock

Deba Japanese kitchen knife Tojiro Hammered Black F-1077 21cm
Deba Kitchen knife TOJIRO Hammered Black 21cm F-1077
A traditional Japanese Tojiro Hammered Black Deba knife. Blade length: 21 cm. The Deba is a Japanese single bevel knife. It is primarily used for filleting fish. Thanks to its heavy blade, it easily removes fins, heads, and other parts of even large fish like salmon. The Tojiro Hammered Black Deba knife is made of high-carbon steel. It has a black finish. It is not dishwasher safe.
€185.48

In stock

Santoku Japanese kitchen knife Tojiro Pro F-895 17cm
Santoku Kitchen knife Tojiro Pro 17cm F-895
This series knives are superior for sharpness and maintenence for re-sharpening due to special alloy steel which is made from stainless steel and sandwiched high purity iron ore with low temperature gas reduction method. Tornade pattern handle is proud of superior design which become familiar with more use.
€91.94

In stock

Peeling Vegetable knife Tojiro Zen FD-560 7cm - 1
Peeling Kitchen knife Tojiro Zen 7cm FD-560
The essence of “Tojiro”, fusion of Japanese-style sticking to the keenness and Western-style. This is a standard series with basic functions of Japanese-style knives have been cultivated in their mind by working hard. Edging is the sharpness is the same as upper grade’s even if this is a standard series. Please feel Japanese knife culture close to you.
€46.77

In stock

Deba Japanese kitchen knife Tojiro Zen FD-570 11.5cm - 1
Deba Kitchen knife Tojiro Zen 11.5cm FD-570
Traditional Mini Deba. The essence of “Tojiro”, fusion of Japanese-style sticking to the keenness and Western-style. This is a standard series with basic functions of Japanese-style knives have been cultivated in their mind by working hard. Edging is the sharpness is the same as upper grade’s even if this is a standard series. Please feel Japanese knife culture close to you.
€77.42

In stock

Gyuto Japanese kitchen knife Tojiro Zen FD-564 21cm
Gyuto Kitchen knife Tojiro Zen 21cm FD-564
Tojiro Zen 3Layered Cobalt Alloy Steel Chef Knife FD-564 with 21 cm blade. VG10 as core steel, clad by 13-chrome stainless steel, it has achieved both professional sharpness and easy maintenance. Handle is made from magnolia and has good water resistance. Weight 135 g.
€103.23

In stock

Santoku Japanese kitchen knife Tojiro Powdered High Speed Steel F-517 17cm
Santoku Kitchen knife Tojiro Powdered High Speed Steel 17cm F-517
Powdered high speed steel is made of processed high speed steel that is extremely hard and usually used for cutting metals. It processed by the way called Powder metallurgy (injecting into a mold and harden by rapid heating), which is one of the most superior method to refine metals. The atoms are uniformly in lines and the material is very minute. Blade made by being gathered the best advanced modern technology must provide you an amazing keenness and its sustainability, which may be the longest in Japanese knife industry. The keenness lasts much longer than you think and it is ultimate blade.
€183.87

In stock

Yanagiba Japanese kitchen knife Tojiro Hammered Black sushi and sashimi F-1080 21cm
Yanagiba Kitchen knife TOJIRO Hammered Black sushi and sashimi 21cm F-1080
The “Black hammered finish” may look bluntly but a lot of heart and soul of craftsman inside inversely proportional to the appearance. The price range is also reasonable compared to the other free hand forged knives. In modern society, everything is rationalized and made efficient. However, workplaces of free hand forging are taking over traditional manufacturing process and everything has been processing by hand. Every single piece is made by hand and put craftsman’s skill in the every single process such as forging, edging and putting handle etc. They are all holy works to put their soul into knives. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
€112.90

In stock

Japanese kitchen knife Tojiro Pro F-896 21cm
Kitchen knife Tojiro Pro 21cm F-896
DP cobalt alloy steel is an epoch-making clad steel manufactured by low temperature gas reduction method, which takes away impurities in a ore and lead to high purity iron.The cobalt alloy steel is sandwiched by 13 chrome. This series is absolutely “Global Standard” of all stainless knives combining 3 layers blade, which has good reputation among professionals with stainless handle.
€96.77

In stock

Gyuto Japanese kitchen knife Tojiro Pro F-890 24c
Gyuto Kitchen knife Tojiro Pro 24cm F-890
This series is absolutely “Global Standard” of all stainless knives combining 3 layers blade, which has good reputation among professionals with stainless handle.
€129.03

In stock

Gyuto Japanese kitchen knife Tojiro Pro F-889 21cm
Gyuto Kitchen knife Tojiro Pro 21cm F-889
DP cobalt alloy steel is an epoch-making clad steel manufactured by low temperature gas reduction method, which takes away impurities in a ore and lead to high purity iron.The cobalt alloy steel is sandwiched by 13 chrome. This series is absolutely “Global Standard” of all stainless knives combining 3 layers blade, which has good reputation among professionals with stainless handle.
€100.81

In stock

Sujihiki Japanese kitchen knife Tojiro Pro F-886 24cm
Sujihiki Kitchen knife Tojiro Pro 24cm F-886
Tojiro Pro Western Sujihiki - slicing knife with long blade.  This series knives are superior for sharpness and maintenence for re-sharpening due to special alloy steel which is made from stainless steel and sandwiched high purity iron ore with low temperature gas reduction method. Tornade pattern handle is proud of superior design which become familiar with more use.
€129.03

In stock

Nakiri Japanese kitchen knife Tojiro DP Damascus Flash FF-VE180 18cm
Nakiri Kitchen knife Tojiro DP Damascus Flash 18cm FF-VE180
Premium Series with Global Standards Has been released as an exclusive export model in abroad but finally came into Japanese domestic market, the name is “Senko(“Flash”)”. Sticking to not only blades but shape of the handle and bolster considering ergonomic aspects. These perfectly designed knives you have never seen are completely different from the other design knives with no substances in the past. DP 37 layers(Peeling, Paring and Deba) or 63 layers(the rest of items) are extravagantly used for this series and the keenness is just like “Flash” in dark sky. The beautiful pattern on the blade is a proof of the sharpness and the wide variety is one the reason to attract people in the world. Features, Micarta Handle and Plates Employed “Micarta” for the handle material, which is usually used for high-grade outdoor knives as well. The beautiful handle grains that appear just like in combination with its blade’s ripple has strong duration covered with impressive metal plates. The plates are welded inside of the handle, which is difficult ways and we even spend time and effort on it. The die-cast bolster has suitable weight and a soft touch to fingers. The design also enables you to grip in many ways when you use and provides very comfortable feeling. The weight is well-balanced considering most effective usability and it goes just as you want using the weight. The more you use, the better you will understand.
€233.87

In stock

Santoku Japanese kitchen knife Tojiro DP Damascus Flash FF-SA180 18cm
Santoku Kitchen knife Tojiro DP Damascus Flash 18cm FF-SA180
Premium Series with Global Standards Has been released as an exclusive export model in abroad but finally came into Japanese domestic market, the name is “Senko(“Flash”)”. Sticking to not only blades but shape of the handle and bolster considering ergonomic aspects. These perfectly designed knives you have never seen are completely different from the other design knives with no substances in the past. DP 37 layers(Peeling, Paring and Deba) or 63 layers(the rest of items) are extravagantly used for this series and the keenness is just like “Flash” in dark sky. The beautiful pattern on the blade is a proof of the sharpness and the wide variety is one the reason to attract people in the world. Features, Micarta Handle and Plates Employed “Micarta” for the handle material, which is usually used for high-grade outdoor knives as well. The beautiful handle grains that appear just like in combination with its blade’s ripple has strong duration covered with impressive metal plates. The plates are welded inside of the handle, which is difficult ways and we even spend time and effort on it. The die-cast bolster has suitable weight and a soft touch to fingers. The design also enables you to grip in many ways when you use and provides very comfortable feeling. The weight is well-balanced considering most effective usability and it goes just as you want using the weight. The more you use, the better you will understand.
€217.74

In stock

Gyuto Japanese kitchen knife Tojiro DP Damascus Flash FF-CH240 24cm
Gyuto Kitchen knife Tojiro DP Damascus Flash 24cm FF-CH240
Big damascus chef's knife. Employed “Micarta” for the handle material, which is usually used for high-grade outdoor knives as well. The beautiful handle grains that appear just like in combination with its blade’s ripple has strong duration covered with impressive metal plates. The plates are welded inside of the handle, which is difficult ways and we even spend time and effort on it. The die-cast bolster has suitable weight and a soft touch to fingers. The design also enables you to grip in many ways when you use and provides very comfortable feeling. The weight is well-balanced considering most effective usability and it goes just as you want using the weight. The more you use, the better you will understand.
€279.84

In stock

Tojiro was founded in 1955 in Tsubame-Sanjo, Niigata Prefecture, Japan as Fujitora. The history of TOJIRO knives began with a stainless steel fruit knife. At that time, stainless steel blades were considered not sharp enough in Japan compared to carbon steel. Therefore, TOJIRO focused on the cutting properties of knives, making their slogan “More than just sharpness”.

In 2000, the brand officially changed its name to Tojiro, focusing on the production of world-class kitchen knives. Since the factory is located in a region that has historically been a center of metalworking, TOJIRO values ​​​​tradition. The company combines ancient hand-forging technologies with modern steel processing methods. For example, the DP (Decarburization Prevention) method prevents carbon loss during heat treatment, maintaining the hardness of the blade (60-61 HRC).

The TOJIRO factory itself also combines handcrafted craftsmanship with automated quality control processes. Each knife goes through dozens of stages: from forging and hardening to manual sharpening and polishing. Both carbon and high-tech multilayer steels are used in production, including the popular VG-10, which holds an edge perfectly. Our exclusive film about the Tojiro factory in Japan is available on the MyGoodKnife YouTube channel. You can see with your own eyes how Tojiro knives are created and see how blacksmiths create blades by hand, as well as the sharpening and polishing process.

Our assortment includes both classic TOJIRO series - DP, Basic, Shippu, Zen, Damascus Flash and others, as well as new ones - Sakuya, Reppu. Each series of knives includes the most popular models: chef's knife gyuto, santoku, nakiri, vegetable and utility knives. TOJIRO also produces classic Japanese knives with single-sided sharpening for sushi and sashimi, fish cutting.

TOJIRO also produces high-quality sharpening stones and accessories, including sharpening angle stabilizers and combined stones for finishing and basic sharpening. This ensures that the knife will serve you for decades with proper care.

MyGoodKnife store is the official TOJIRO dealer.