Gyuto Coltelli da Chef

Filtra per
Prezzo
€ €
Produttori
Lunghezza lama, mm
Paese
Acciaio
Maniglia
Collezione
Durezza
Filtro
Gyuto (coltello da chef) Coltello da cucina giapponese Dragon by Apogee Storm Chef 00863 22.9cm
-10%
Gyuto (coltello da chef) Coltello da cucina giapponese Dragon by Apogee Storm Chef 22.9cm 00863
Dragon Storm chef´s knife is a powerhouse food prep blade. Measuring in at 9" and with a gentle edge curvature, both push cuts and rocking motions are easy and comfortable to perform while slicing, dicing, mincing and chopping your way to a delicious meal. The ergonomic G10 handle fits in the hand as a natural extension of the body and the decorative center rivet adds a touch of class. The acid-etched American BD1N stainless steel cutting edge extends fully from tip to heel, so the entire blade can be maintained and sharpened properly. Overall length 14". Blade length 9". Weight 7.7 oz. Recommended hand-washed.
Winner of the Kitchen Knife of the Year at 2019's BLADE Show, the Dragon Storm series of knives is a cut above the rest. 
113,95 €
126,61 €

In magazzino

Utility kitchen knife Miyabi 6000MCT Gyutoh 34073-201-0 20cm - 1
-10%
Gyuto (coltello da chef) Coltello da cucina giapponese Miyabi 6000MCT Artisan Gyutoh 20cm 34073-201-0
Measuring 20 cm in length, the GYUTOH knife is suitable for cutting and separating fish and meat. Its pointed tip and sturdy blade enable clean cuts to be made. The handle’s flat finishing ensures safety by preventing your hand from slipping from the handle onto the blade. Miyabi also uses a Japanese blade profile, meaning that the GYUTOH combines high-cutting quality properties with comfort.
The blade is made of a micro-carbide powder steel core wrapped in two additional layers of steel. The blade is hammer-forged, giving it an appearance slightly reminiscent of the Tschumine design. In addition, each blade of the MIYABI 600MCT series is put through different ice-hardening processes which must be completed at -196°C, so that a final hardness of around 63 Rockwell is achieved.
The blade is polished on both sides and finished by hand using Honbazuke honing. The handle on the other hand is made out of pakka wood, which has a subtle pattern and stands out thanks to its sturdiness and flexibility. The perfect balance enables a high level of comfort and lets you work without tiring, thus making the knife from Miyabi a useful cutting utensil in your kitchen.
- Blade core made of MicroCarbide MC63 powder steel embedded in 2 layers of steel. This provides a hardness of approx. 63 Rockwell. (International standard unit of measurement for hardness); - CRYODUR® ice-hardened blades provide particularly good cutting edge retention, corrosion resistance and optimum blade flexibility. - Authentic Japanese blade profile with Tsuchime look (hammered finish). - The symmetrical blade with ultra-sharp Honbazuke edge ensures incredible sharpness. - Dimensionally-stable pakka wood handle for perfect balance, outstanding comfort and fatigue-free cutting with all cutting techniques; sophisticated dark wood look.
214,11 €
237,90 €

Spedizione dopo 15-30 giorni lavorativi

Gyuto Japanese kitchen knife Seki Kanetsugu 9006 23cm - 1
-10%
Coltello da cucina giapponese Gyuto (coltello da chef) Seki Kanetsugu Saiun 23cm 9006
Il coltello da chef Gyuto della serie Seki Kanetsugu Saiun è progettato per un'ampia gamma di attività, tra cui affettare carne, pesce, verdura, frutta ed erbe aromatiche. La lama da 23 cm offre una comoda maneggevolezza anche per alimenti di grandi dimensioni e permette di affettare persino i pezzi più sottili. Questo modello combina un filo tagliente di alta qualità con la funzionalità di un coltello da chef europeo. Vanta un eccellente equilibrio e un'affilatura impeccabile, che lo rendono adatto sia alle cucine professionali che agli appassionati di cucina casalinga più esigenti. La splendida lama della serie SAIUN è realizzata con la tecnologia Damasco multistrato: un'anima in acciaio VG-10 di alta qualità è rivestita da strati in acciaio AUS-2, per un totale di 33 strati. Il manico è in micarta, un materiale resistente e igienico, impermeabile e adatto a un uso intensivo. Il coltello da chef giapponese Seki Kanetsugu Saiun è prodotto nella città di Seki, uno dei centri storici della produzione di coltelli e spade giapponesi.
121,91 €
135,45 €

In magazzino

Gyuto Japanese kitchen knife Seki Kanetsugu Pro-M 7007 27cm - 1
-10%
Gyuto (coltello da chef) Coltello da cucina giapponese Seki Kanetsugu Pro-M 27cm 7007
The blade is made of Molybdenum alloy high carbon stainless steel with traditional"Hamaguri ba" (Convex edge grind), the edge that made Japanese swords famous, for an outstanding sharpness and durability,and yet easy to resharpen. It is heat treated and then Sub Zero quenched. which refrigerates the blade to 70 degrees for longer edge retention and strength to brittleness and chipping.pro m handle1.jpg Since introducing the Kanetsugu Pro M series two years ago, Seki Kanetsugu has received a positive reputation for their unique Round Shape of Black Pakka wood handle for comfortable grip, well balanced and practical shape. You might have not been familiar with this shape of the handle and the blade edge (Convex edge). Mr. Kawamura (President of Kanetsugu company) has spent numerous times to research and study to produce the best performance chef knives. Recomeneded for both - Home Chefs to Pro Chefs who demand extra sharpness and cutting performance for the sophisticated cooking life.
72,22 €
80,24 €

In magazzino

Coltello da cucina giapponese Gyuto (coltello da chef) TOJIRO Zen Black FD-1565 24cm
-10%
Coltello da cucina giapponese Gyuto (coltello da chef) TOJIRO Zen Black 24cm FD-1565
Il coltello da chef Tojiro Zen Black FD-1565 è dotato di una lama da 24 cm. Lo strato tagliente delle lame a tre strati della serie di coltelli giapponesi ZEN è realizzato in acciaio VG-10 e vanta un'affilatura eccezionale. I foderi esterni sono realizzati in acciaio cromato con finitura ossidata nera. Il manico marrone è in legno di castagno. Questo coltello da chef non è lavabile in lavastoviglie e non deve essere utilizzato per tagliare alimenti congelati. Il coltello da chef Tojiro Zen Black FD-1565 pesa 170 g ed è disponibile in una scatola con marchio.
137,18 €
152,42 €

In magazzino

Gyuto Japanese kitchen knife Tojiro VG10 Hammered F-1114 18cm
-10%
Coltello da cucina giapponese Gyuto (coltello da chef) TOJIRO VG10 Hammered 18cm F-1114
Il coltello da chef Tojiro VG10 Hammered ha una lama da 18 cm. La lama è realizzata in VG10 e un sandwich san mai di acciaio inossidabile morbido. Il peso è di 215 g. Il VG10 Hammered è una delle linee di coltelli più popolari di Tojiro. Il VG10 è l'acciaio inossidabile più apprezzato nella produzione di coltelli giapponese. È stato sviluppato dalla Takefu Specialty Steels Company, quindi è logico che la maggior parte dei fabbri locali lo utilizzi.
90,73 €
100,81 €

In magazzino

Coltello da cucina giapponese Gyuto (coltello da chef) Ittetsu Shirogami IW1189 24cm
-10%
Coltello da cucina giapponese Gyuto (coltello da chef) Ittetsu Shirogami 24cm IW1189
Coltello da chef Gyuto Ittetsu con lama da 24 cm. Lama in acciaio Shirogami con rivestimento in ferro. Manico: noce mono ottagonale impermeabile. Non tentare di tagliare, colpire o tritare prodotti congelati o ossa. La lama potrebbe scheggiarsi o rompersi. Per il coltello Gyuto Ittetsu si consiglia il lavaggio a mano con acqua tiepida e l'asciugatura con un panno. Il Gyuto è l'equivalente giapponese di un coltello da chef standard in stile occidentale ed è essenziale per il cuoco/chef professionista.
152,42 €
169,35 €

In magazzino

Gyuto Japanese kitchen knife Seki Kanetsugu Heptagon-Silver 8005 21cm
-10%
Coltello da cucina giapponese Gyuto (coltello da chef) Seki Kanetsugu Heptagon-Silver 21cm 8005
Coltello da chef giapponese gyuto della serie Heptagon-Silver di Seki Kanetsugu. Questa serie economica è facile da usare e non richiede cure particolari. Lama da 21 cm in acciaio inossidabile ad alto tenore di carbonio, molibdeno e vanadio. Il codolo intero della lama è stampato a iniezione con rinforzo/testa in resina ABS blu scuro resistente al calore e impugnatura in alluminio anodizzato argento per impedire all'acqua di penetrare nel manico, garantendo igiene e resistenza alla ruggine. Anche l'impugnatura a forma di septangle è molto particolare e comoda da impugnare.
56,58 €
62,87 €

In magazzino

Gyuto Japanese kitchen knife Seki Kanetsugu 5006 24cm - 1
-10%
Gyuto (coltello da chef) Coltello da cucina giapponese Seki Kanetsugu Pro-S 24cm 5006
Seki Kanetsugu chef gyuto knife. The 240 mm blade is made of Molybdenum alloy high carbon stainless steel with traditional "Hamaguri ba" (Convex edge grind), the edge that made Japanese swords famous, for an outstanding sharpness and durability, and yet easy to resharpen. It is heat treated and then Sub Zero quenched, which refrigerates the blade to 70 degrees for longer edge retention and strength to brittleness and chipping. Seki Kanetsugu now pleased to add the Stainless steel Hollow Handle version. Light weight, yet Well balanced 18-8 Hollow Stainless steel handle has traditional Katana Handle Pattern (The pattern also makes non-slip grip) and comfortable Round shape grip. Advantage of Stainless steel handle is sanitary, seamless and has good durability, does not get shrinked ulike wooden handle. It's good idea and design of Pro S Katana style handle, as it perfectly matches with Katana sharpness of Pro S special Hamaguri convex edge blade. This could be a special weapon for chefs.
70,40 €
78,23 €

In magazzino

Gyuto Japanese kitchen knife Tojiro Atelier TA-CH180 18cm - 1
-10%
Gyuto (coltello da chef) Coltello da cucina giapponese TOJIRO Atelier 18cm TA-CH180
Gyuto knife Tojiro Forged with 180 mm balde. The gyuto is a Japanese designed chef’s knife. New especial series from Tojiro are hand forged by masters of Tojiro Atelier. This japanese kicthen knife has classic kitchen knife's handle made of reinforced laminated material. Unique damascus blade with black finish. Tojiro knives of this exclusive series are forged by hands, using same method as japanese swords traditionally were made.
284,52 €
316,13 €

In magazzino

Gyuto Japanese kitchen knife Tojiro DP Damascus Flash FF-CH210 21cm
-10%
Coltello da cucina giapponese Gyuto (coltello da chef) TOJIRO DP Damascus Flash 21cm FF-CH210
Tojiro Damascus Flash has been released as an exclusive export model in abroad but finally came into Japanese domestic market, the name is “Senko(“Flash”)”. Sticking to not only blades but shape of the handle and bolster considering ergonomic aspects. These perfectly designed knives you have never seen are completely different from the other design knives with no substances in the past. DP 37 layers(Peeling, Paring and Deba) or 63 layers(the rest of items) are extravagantly used for this series and the keenness is just like “Flash” in dark sky. The beautiful pattern on the blade is a proof of the sharpness and the wide variety is one the reason to attract people in the world.
Features, Micarta Handle and Plates
Employed “Micarta” for the handle material, which is usually used for high-grade outdoor knives as well. The beautiful handle grains that appear just like in combination with its blade’s ripple has strong duration covered with impressive metal plates. The plates are welded inside of the handle, which is difficult ways and we even spend time and effort on it. The die-cast bolster has suitable weight and a soft touch to fingers. The design also enables you to grip in many ways when you use and provides very comfortable feeling. The weight is well-balanced considering most effective usability and it goes just as you want using the weight. The more you use, the better you will understand.
214,11 €
237,90 €

In magazzino

Japanese kitchen knife Gyuto Takeshi Saji Ebony HA-4808 21cm
-10%
Coltello da cucina giapponese Gyuto (coltello da chef) Takeshi Saji Ebony 21cm HA-4808
Japanese chef's knife handmade by Mr. Takeshi Saji. Blade - 31 layers nickel damaskus steel, VG10 core. Blade length 21 cm. Handle - ebony with buffalo horn bolster. Weight of chef's knife by Takeshi Saji is 290 g.Takeshi Saji is a Chairman of Saji Balacksmith (Japan). Member of Japan Knife Guild and Japan Custom Knife Makers. In 1992, he was officially certified as Dentoukougeishi, a “Traditional Master Craftsman” by the Japanese “Ministry of International Trade & Industry”.
377,42 €
419,35 €

In magazzino

Gyuto Japanese kitchen knife Miyabi 5000FCD 34681-241-0 24cm - 1
-10%
Gyuto (coltello da chef) Coltello da cucina giapponese Miyabi 5000FCD RAW 24cm 34681-241-0
Zwilling Miyabi 5000FCD Gyutoh chef's knife 24 cm is perfectly balanced, contains a unique Damascus design and an incomparable edge. With a blade length of 24 cm, it is ideal for cutting meat and large vegetables, the Japanese equivalent of the European chef's knife. Gyutoh knife has a hard fine carbide steel core which gives very good cutting edge retention and sharpness. The FC61 steel core of the blade is embedded in 48 outer layers of Damascus-design steel, giving each knife its unique pattern. The cutting edge is symmetrical (not single bevel) so it’s suitable for both right and left-handed use. The edge is Honbazuke-honed – a three-stage grinding, sharpening and polishing process resulting in razor-like sharpness. There is no finger guard so the whole length of the cutting edge can be used. The pakka wood handle seamlessly joins the half-bolster. The smooth join helps to prevent calluses forming on the thumb and forefinger. For best care, it’s recommended to hand wash only. Maintain and sharpen on a whetstone, and using glass, ceramic or stone cutting boards should be avoided as this can prematurely dull the cutting edge. Zwilling Miyabi 5000FCD Gyutoh chef's knife made in Japan.
202,50 €
225,00 €

Spedizione dopo 15-30 giorni lavorativi

Gyuto Japanese kitchen knife Miyabi 5000FCD 34681-161-0 16cm - 1
-10%
Coltello da cucina giapponese Gyuto (coltello da chef) Miyabi 5000FCD RAW 16cm 34681-161-0
Zwilling Miyabi 5000FCD gyutoh chef's knife 16 cm is used as a general purpose knife for preparing larger cuts of meat and vegetables. Gyutoh knife has a hard fine carbide steel core which gives very good cutting edge retention and sharpness. The FC61 steel core of the blade is embedded in 48 outer layers of Damascus-design steel, giving each knife its unique pattern. The cutting edge is symmetrical (not single bevel) so it’s suitable for both right and left-handed use. The edge is Honbazuke-honed – a three-stage grinding, sharpening and polishing process resulting in razor-like sharpness. There is no finger guard so the whole length of the cutting edge can be used. The pakka wood handle seamlessly joins the half-bolster. The smooth join helps to prevent calluses forming on the thumb and forefinger. For best care, it’s recommended to hand wash only. Maintain and sharpen on a whetstone, and using glass, ceramic or stone cutting boards should be avoided as this can prematurely dull the cutting edge. Zwilling Miyabi 5000FCD gyutoh chef's knife made in Japan.
158,95 €
176,61 €

Spedizione dopo 15-30 giorni lavorativi

Gyuto Japanese kitchen knife Miyabi 6000MCT 34073-241-0 24cm - 1
-10%
Gyuto (coltello da chef) Coltello da cucina giapponese Miyabi 6000MCT Artisan 24cm 34073-241-0
Zwilling Miyabi 6000MCT Gyuto 24 cm chef's knife is suitable for cutting and separating fish and meat also vegetables. The double-edged blade and Honbazuke honing give the knife its sharpness. The authentic Japanese blade profile ensures the 24 cm long Gyuto is easy to use and will stay sharp. The knife is part of the MIYABI 6000MCT series and has a blade with a hammered finish and a Tsuchime look. The handle is made of premium, smooth-grained cocobolo pakka wood. A mosaic pin gives it a special design feature. The handle will retain its shape and has easy care properties. The knife is finely balanced to make cutting an effortless and pleasurable task. The blade is manufactured from MicroCarbide powder steel embedded between two additional steel layers. The central section achieves a hardness rating of around 63 Rockwell. The knife also undergoes special hardening procedures such as ice hardening at -196 degrees Celsius. This increases the blade's stability, flexibility, durability and robustness to provide you with a practical and sharp knife to effortlessly carry out a multitude of kitchen tasks. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.
231,53 €
257,26 €

Spedizione dopo 15-30 giorni lavorativi

Gyuto Japanese kitchen knife Tojiro Handmade J6 21cm - 1
-10%
Gyuto (coltello da chef) Coltello da cucina giapponese TOJIRO Handmade 21cm J6
Chef knife handmade by Tojiro blacksmiths. Tojiro designs and builds several collections of chef knives at their shop in the Japanese city of Niigata, long known for its knife and tool making expertise. This Chef knife represents the pinnacle of their kitchen knives, hand-forged by a small team outside of the operations where many of their knives are produced. Handle of this japanese kitchen knife is combined: rosewood and white and black buffalo horn. Blade is made of 63 layers VG10 steel. Tojiro handmade chef knife goes in wooden box.
428,22 €
475,80 €

In magazzino

Gyuto Japanese kitchen knife Takeshi Saji VG10, bull bone HA4608 21cm - 1
-10%
Gyuto (coltello da chef) Coltello da cucina giapponese Takeshi Saji VG10, bull bone 21cm HA4608
Japanese chef knife handmade by Mr. Takeshi Saji. Blade - 31 layers damaskus steel, VG10. Blade length 21 cm. Handle - bull bone. Brass bolster. Weight of japanese chef knife Takeshi Saji is 330 g. Takeshi Saji is a Chairman of Saji Balacksmith (Japan). Member of Japan Knife Guild and Japan Custom Knife Makers. In 1992, he was officially certified as Dentoukougeishi, a “Traditional Master Craftsman” by the Japanese “Ministry of International Trade & Industry”.
355,64 €
395,16 €

In magazzino

Gyuto Japanese kitchen knife Miyabi 7000D 34543-241-0 24cm - 1
-10%
Gyuto (coltello da chef) Coltello da cucina giapponese Miyabi 7000D 24cm 34543-241-0
Zwilling Miyabi 7000D Gyutoh 24 sm. - Blade of Zwilling Miyabi 7000D Gyutoh is made from steel with 65 layers and Damask design. - CRYODUR® blade, hardened in a specifically developed process (including ice-hardening at -196°C) for its extreme hardness. - Symmetric blades with an ultra-sharp Honbazuke honing. - The traditional “D-handle” allows tireless working in all cutting techniques. - Solid and easy-care Micarta handle of Zwilling Miyabi 7000D Gyutoh in fine wood texture, made from a multi-layered linen/resin compound in combination with stainless steel. There are only best kitchen knives in MyGoodKnife’s range.
246,05 €
273,39 €

In magazzino

Gyuto Japanese kitchen knife Tojiro VG10 Hammered F-1116 24cm
-10%
Coltello da cucina giapponese Gyuto (coltello da chef) TOJIRO VG10 Hammered 24cm F-1116
Il coltello da chef Tojiro VG10 Hammered ha una lama da 24 cm. La lama è realizzata in VG10 e un sandwich san mai di acciaio inossidabile morbido. Un semplice manico in legno di ho con profilo a D completa questo coltello ben fatto e di facile manutenzione. Il peso del coltello da chef Tojiro VG10 Hammered è di 275 g.
VG10 Hammered è una nuova linea di coltelli Tojiro. Il VG10 è l'acciaio inossidabile più apprezzato nella produzione di coltelli giapponese. È stato sviluppato dalla Takefu Specialty Steels Company, quindi è logico che la maggior parte dei fabbri locali lo utilizzi.
132,10 €
146,77 €

In magazzino

Utility kitchen knife Miyabi 6000MCT Gyutoh 34073-161-0 16cm - 1
-10%
Gyuto (coltello da chef) Coltello da cucina giapponese Miyabi 6000MCT Artisan Gyutoh 16cm 34073-161-0
The GYUTOH measuring 16 cm in length has a smooth, pointed blade which makes the knife well suited to cutting and slicing fish and meat. Large vegetables are also no problem. Miyabi paid attention to making an authentic Japanese blade profile that makes the knife extremely hard and sharp. The cutting qualities are completed by the Pakka wood handle which is comfortable to hold. The blade is manufactured from micro-carbide powder steel which is embedded between two other layers of steel. The blade is hardened even further using a special procedure such as ice-hardening at -196 degrees Celsius in order to achieve extremely high levels of hardness and sharpness. The blade has been ground on both sides and finished using the Honbazuke blade-honing technique. It is also very aesthetically pleasing thanks to the Tsuchime design which looks like the surface has been hammered. The ergonomically shaped handle is made out of cocobolo pakkawood, which is a dark, smooth-grained wood standing in direct contrast to the blade. The handle has a bent shape to make effortless cutting possible. The handle is well balanced which is typical of knives of the MIYABI 6000MCT series. Thanks to this balance, it’s possible to work for extended periods without tiring. With the high-quality, Japanese knife, you can complete many jobs in the kitchen - Blade core made of MicroCarbide MC63 powder steel embedded in 2 layers of steel. This provides a hardness of approx. 63 Rockwell. (International standard unit of measurement for hardness); - CRYODUR® ice-hardened blades provide particularly good cutting edge retention, corrosion resistance and optimum blade flexibility. - Authentic Japanese blade profile with Tsuchime look (hammered finish). - The symmetrical blade with ultra-sharp Honbazuke edge ensures incredible sharpness. - Dimensionally-stable pakka wood handle for perfect balance, outstanding comfort and fatigue-free cutting with all cutting techniques; sophisticated dark wood look.
185,08 €
205,65 €

In magazzino

Gyuto Japanese kitchen knife Tojiro DP Damascus Flash FF-CH180 18cm
-10%
Gyuto (coltello da chef) Coltello da cucina giapponese TOJIRO DP Damascus Flash 18cm FF-CH180
Chef knife 18 sm. Has been released as an exclusive export model in abroad but finally came into Japanese domestic market, the name is “Senko(“Flash”)”. Sticking to not only blades but shape of the handle and bolster considering ergonomic aspects. These perfectly designed knives you have never seen are completely different from the other design knives with no substances in the past. DP 37 layers(Peeling, Paring and Deba) or 63 layers(the rest of items) are extravagantly used for this series and the keenness is just like “Flash” in dark sky. The beautiful pattern on the blade is a proof of the sharpness and the wide variety is one the reason to attract people in the world. Features, Micarta Handle and Plates Employed “Micarta” for the handle material, which is usually used for high-grade outdoor knives as well. The beautiful handle grains that appear just like in combination with its blade’s ripple has strong duration covered with impressive metal plates. The plates are welded inside of the handle, which is difficult ways and we even spend time and effort on it. The die-cast bolster has suitable weight and a soft touch to fingers. The design also enables you to grip in many ways when you use and provides very comfortable feeling. The weight is well-balanced considering most effective usability and it goes just as you want using the weight. The more you use, the better you will understand.
195,97 €
217,74 €

In magazzino

Gyuto Japanese kitchen knife Kasumi VG10 Pro 58024 24cm - 1
-10%
Coltello da cucina giapponese Gyuto (coltello da chef) Kasumi VG10 Pro 24cm 58024
Chef knife Kasumi VG10 Pro 24 sm. These latest generation of Kasumi VG-10 Pro Series knives are forged from one single piece of Solid Super Stainless Steel High Carbon VG-10 (HRC 60~61). The beautiful ergonomic handle is made from durable marble resin in high gloss finish and comes decorated with a mosaic pin. The blades have a hardness Rockwell HRC 59-60 representing the ideal hardness for kitchen professional knives of high quality and guaranteeing the best cutting and tight performances of the cutting-edge and having a longer duration with respect to the major part of other knives. There are only best kitchen knives in MyGoodKnife’s range.
151,69 €
168,54 €

In magazzino

Gyuto Japanese kitchen knife Kasumi VG10 Pro 58020 20cm - 1
-10%
Gyuto (coltello da chef) Coltello da cucina giapponese Kasumi VG10 Pro 20cm 58020
Kasumi Chef knife 20 cm VG10 Pro Series. These latest generation of Kasumi VG-10 Pro Series knives are forged from one single piece of Solid Super Stainless Steel High Carbon VG-10 (HRC 60~61). The beautiful ergonomic handle is made from durable marble resin in high gloss finish and comes decorated with a mosaic pin. The blades have a hardness Rockwell HRC 59-60 representing the ideal hardness for kitchen professional knives of high quality and guaranteeing the best cutting and tight performances of the cutting-edge and having a longer duration with respect to the major part of other knives. There are only best kitchen knives in MyGoodKnife’s range.
143,70 €
159,67 €

In magazzino