Filtern nach
Preis
Marken
Klingenlänge, mm
Land
Stahl
Griff
Serie
Härte
Filter
-10% Sold out
Etui Tojiro Santoku Saya 18 cm M-311
The M-311 saya will fit all Tojiro Santoku knives with blades up to 180mm. About models of other manufactures, please, ask our consultants. Tojiro saya/wooden sheaths are made from magnolia wood which is a hard wood and is very light weight. Saya has small wooden pin which you remove to place your knife inside and you can then reattach the pin to make it safe. The saya are also very good if keeping knives in draws at home or in the professional kitchen as they will be protected from other sharp blade which can potentially chip or dull the cutting edge.
25,40 €
28,23 €

Sold out

-10% Sold out
Yanagiba Japanisches Messer Tojiro MV 27cm F-1058
Tojiro MV Resin Collar Yanagi-Sashimi with 270mm blade. Blade made from wear and rust resistant Molybdenum Vanadium steel. So that its maintenance is easier than carbon steel knives and therefore suitable for beginners. However, edge is carefully sharpened without compromise by our craftsman. Handle is made from magnolia and has good water resistance. Weight of Tojiro MV Yanagiba F-1058 knife is 145 g. Like other traditional Japanese knife blades, this knife has a bevel on only one side of the blade, to help achieve even slices.
98,71 €
109,68 €

Sold out

-10% Sold out
Sujihiki Japanisches Messer Tojiro Zen Black 21cm FD-1569
Die messer Tojiro Zen Black FD-1569 beidseitig angeschliffene Sushimesser eignet sich hervorragend zum Schneiden von Fischfilets. Die schlanke und schmale Klinge schneidet den Fisch mit einem einzigen langen, ziehenden Schnitt in feinste Scheiben. Es ähnelt dem europäischen Filetiermesser und kann auch als solches verwendet werden. Ein Sushimesser ist auch gut zum Zerteilen von größeren Fleischstücken geeignet. Die Klinge dieses Messers wird aus einem sogenannten 3-Lagen Stahl hergestellt. Als mittlere Lage wird der bewährte VG-10 (HRC 60 +/-1) Stahl eingesetzt. Ein kohlenstoffhaltiger Stahl, der der Schneide eine besonders lange Schnitthaltigkeit beschert. Dieser sehr harte Stahl wird von den äußeren, chromhaltigen Lagen geschützt. Dies ergibt einen Verbundstahl mit hoher Widerstandsfähigkeitund lang anhaltender Schärfe. Der Griff des Messers ist aus echtem, dunkelbraunem, gebranntem  Kastanienholz in Kastanienform gefertigt. Das bedeutet, dass der natürliche Griff an der rechten Seite eine leichte Kante hat. Diese sorgt dafür, dass er noch angenehmer und sicherer in der Handinnenfläche liegt.
100,16 €
111,29 €

Sold out

-10% Sold out
Nakiri Japanisches Messer TOJIRO Zen Black 16.5cm FD-1568
Das Tojiro Zen Black FD-1568 Nakiri-Messer hat eine 165 mm lange Klinge. Das Nakiri ist ein japanisches Küchenmesser zum Schneiden und Hacken, das vorwiegend für Gemüse verwendet wird. Die Klinge besteht aus einem VG-10-Stahlkern mit schwarz verchromten Stahleinlagen. Der traditionelle japanische ovale Griff aus Kastanienholz ist spülmaschinenfest und eignet sich zum Schneiden von Tiefkühlkost, Knochen und anderen sehr harten Lebensmitteln. Das Tojiro Zen Black FD-1568 Nakiri-Messer wiegt 145 g und wird in einer eleganten Markenverpackung geliefert.
114,74 €
127,49 €

Sold out

-10% Sold out
Sujihiki Japanisches Messer Mcusta Zanmai Forest 27cm HBG-6011M
Japanese slicing knife sujihiki Mcusta Zanmai Forest with 270 mm blade. Mcusta Zanmai Forest Molybdenum Series is a great introduction to high quality Japanese knives. For this series, Zanmai forges each blade using Molybdenum Vanadium 8A steel and sharpens them utilizing Zanmai's famous Hamaguri V-Cut form. This grinding method results in incredibly sharp knives that are easy to use and maintain. The handle’s end caps are mirror finished and provide additional balance. The beautiful green micarta hangles are triple-riveted to complete this professional quality knife at an affordable price. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives and scissors at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
115,40 €
128,22 €

Sold out

-10% Sold out
Santoku Japanisches Messer Mcusta Zanmai Supreme Ripple Damascus 18cm TZ2-4003DR
Mcusta Zanmai Supreme Ripple Damascus Santoku with 18 cm blade. Weight is 169 g. Mcusta Supreme Ripple Damascus series feature 33 layers of Damascus-patterned blades with a core of high carbon VG-10 stainless steel, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness.In addition, the unique Ripple pattern is originally created by the Zanmai technology, which you may never find it in the world.The design represents ocean and shore line. It's associated with a Japanese traditional picture in the Edo era.MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives and scissors at our stores are original and made is Seki city, Japan.Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
137,17 €
152,41 €

Sold out

-10% Sold out
Sujihiki Japanisches Messer Mcusta Zanmai Coreless Aranami 24cm ZUA-1010C
Mcusta Zanmai  “coreless steel” series Sujihiki slicing knife with 24 cm blade. VG-10 and VG-2 are laminated together like Damascus steel. Literally there is no core of the steel, that's why this Mcusta kitchen knife series called "coreless". Also the blade patterns are remarkably clearer than on Damascus steel. Mcusta use  “ocean wave” motif which came from a traditional Japanese painting. Handle of Mcusta Zanmai Coreless Aranami Sujihiki knife is made of red pakka wood with a bolster and bottom cap. Mosaic pin on handle and bottom cap. Each knife Mcusta Zanmai Ultimate Coreless Aranami goes in wooden box.
354,92 €
394,35 €

Sold out

-10% Sold out
Santoku Japanisches Messer Tojiro Shippu Black 16.5cm FD-1597
Dieses santoku japanisches Tojiro Shippu Black FD-1597 165mm lange, aus 63 Lagen bestehende Messer ist ideal zum Schneiden von Fisch, Fleisch und Gemüse geeignet. Die breite Klinge des Sippu Black Santokus sorgt für eine spielend einfache Handhabung und kann auch als Palette benutzt werden.Die enorme Schärfe des Damast-Messer wird durch das Verschmieden unterschiedlicher Lagen erreicht. Im Kern wird eine extrem harte Schicht VG-10 Stahl (HRC 60+/-1) in mehrere Lagen mit unterschiedlich hohem Karbonanteil eingebettet. Dadurch wird ein Höchstmaß an Härte und Schnitthaltigkeit bei maximaler Flexibilität und Schneidkantenstabilität erreicht. Die dunkel schimmernde Klingenbeschichtung verleiht dem Messer eine ganz besondere, glänzende Optik. Der dunkelbraune in klassischer, japanischer Kastanienform gefertigte Griff ist aus echtem Kastanienholz gefertigt. Er fühlt sich sehr natürlich an und liegt auch nach lang anhaltenden Schneidarbeiten noch sehr leicht und angenehm in der Hand.Ausgeliefert wird es in einer schwarzbraunen, japanischen Geschenkverpackung aus Kartonage.
139,35 €
154,84 €

Sold out

-10% Sold out
Japanisches Messer Shiro Kamo Kama-Usuba 16.5cm G-0104
Kama-Usuba knife is handmade by Shiro Kamo. Blade lenght is 165 mm. Traditional Japanese octagonal handles in rosewood. Blade is made of Shirogami steel, 11 layers. This japanese knife is not allowed to wash by dishwasher. Knife by mr. Shiro Kamo has very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. The smith Shiro Kamo crafts his blades in the Takefu Knife Village. Shiro Kamo, born in 1958, was honored for his skill with the famous Japanese title "Dento-Kogei-shi" at age 45 (Master of Traditional Craft). Currently, he is President of the Takefu Knife Village Association.
144,44 €
160,48 €

Sold out

-10% Sold out
Japanisches Messer Yoshimi Kato Petty 12cm D-500
Japanese utility Petty knife hand forged by Yoshimi Kato who is a certified traditional craftsman in Takefu, Fukui prefecture in Japan. Blade - Aogami carbon steel with stainless steel clad. Blade length 120 mm. Handle – cherrywood. Hand wash with warm water and towel dry.
137,18 €
152,42 €

Sold out

-10% Sold out
Sujihiki Japanisches Messer Ittetsu Shirogami 27cm IW11813
Sujihiki Ittetsu with 270 mm blade is a double edge slicing knife with a long narrow blade that smoothly slices through meat or vegetables and preserves the integrity of each ingredient's freshness. This Ittetsu sujihiki is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
187,98 €
208,87 €

Sold out

-10% Sold out
Nakiri Japanisches Messer Ittetsu Shirogami 16.5cm IW1185
Japanese Nakiri vegetable knife Ittetsu with 165 mm blade. This nakiri is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
105,24 €
116,94 €

Sold out

-10% Sold out
Santoku Japanisches Messer Ittetsu Shirogami 16.5cm IW1184
Santoku knife Ittetsu with 165 mm blade. This santoku is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. The word santoku translates to three virtues which refers to slicing, dicing and chopping or meat, fish and vegetables depending on who you ask. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. 
97,98 €
108,87 €

Sold out

-10% Sold out
Santoku Japanisches Messer Ittetsu Shirogami 18cm IW11833
Santoku knife Ittetsu with 18 cm blade. The word santoku translates to three virtues which refers to slicing, dicing and chopping or meat, fish and vegetables depending on who you ask. Blade is made of Shirogami Iron Clad steel. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. 
105,24 €
116,94 €

Sold out

-10% Sold out
Japanisches Messer Ittetsu Petty 15cm IW-1183
Japanese Petty knife Ittetsu with 150 mm blade. Blade is made of Shirogami Iron Clad steel. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
97,98 €
108,87 €

Sold out

-10% Sold out
Kiritsuke Japanisches Messer Hideo Kitaoka 11 Layered Shirogami 27cm CN3217
Handmade kiritsuke knife by Mr. Hideo Kitaoka. Shirogami steel, 11 layers. Handle made from Japanese magnolia wood, which has good water resistance and smooth surface. Hideo Kitaoka in Takefu, Fukui Province specializes in the production of high-quality single-edged kitchen knives. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
203,23 €
225,81 €

Sold out

-10% Sold out
Kiritsuke Japanisches Messer Mcusta Zanmai Revolution SPG4 23cm ZRB-1206G
The Mcusta Zanmai Revolution SG2 Kiritsuke Knife is designed for all the tasks for which you'd use a chef's knife. It works extremely well with vegetables, julienne, dice, and more. Can also be used for cleaning and portioning boneless proteins, particularly fish, and slices cooked proteins with grace and ease. The straight edge won't rock through cuts such as a traditional chef's knife. Mcusta Zanmai Revolution SG2 features a SG2 powder steel blade. The 62° Rockwell blade displays hardness, toughness, and flexibility for ultimate sharpness and long lasting edge retention.  The pakkawood handle is accented with a traditional Japanese decorative pin. Handcrafted in Seki city, Japan.
217,74 €
241,93 €

Sold out

-10% Sold out
Gyuto Japanisches Messer Mcusta Zanmai Revolution SPG3 21cm ZRB-1205G
The Mcusta Zanmai Revolution SPG2 Gyoto is fantastic chef's knife with a very thin 3-layer steel blade and SPG2 core, a japanese powder steel known for excellent resistance to wear and corrosion. Mcusta Zanmai Revolution SG2 features a SG2 powder steel blade. The 62° Rockwell blade displays hardness, toughness, and flexibility for ultimate sharpness and long lasting edge retention.  The pakkawood handle is accented with a traditional Japanese decorative pin. Handcrafted in Seki city, Japan.
195,97 €
217,74 €

Sold out

-10% Sold out
Schälmesser Obst- / Schälmesser Mcusta Zanmai Coreless Aranami 11cm ZUA-1001C
Mcusta Zanmai  “coreless steel” series Petty knife with 11 cm blade . VG-10 and VG-2 are laminated together like Damascus steel. Literally there is no core of the steel, that's why this Mcusta kitchen knife series called "coreless". Also the blade patterns are remarkably clearer than on Damascus steel. Mcusta use  “ocean wave” motif which came from a traditional Japanese painting. Handle of Mcusta Zanmai Coreless Aranami Petty knife is made of red pakka wood with a bolster and bottom cap. Mosaic pin on handle and bottom cap. Each knife Mcusta Zanmai Ultimate Coreless Aranami goes in wooden box.
181,45 €
201,61 €

Sold out

-10% Sold out
Gyuto Japanisches Messer Miyabi 5000MCD 24cm 34373-241-0
Zwilling Miyabi 5000MCD Gyutoh 34373-241-0, 24 cm Kochmesser ist perfekt zum Schneiden oder Hobeln von Fleisch oder Fisch. Seine schlanke und dennoch stabile Klinge sorgt für einen perfekt kontrollierten und sauberen Schnitt. Es hat ein authentisches japanisches Profil mit einer extrem scharfen Honbazuke-Honung und ist symmetrisch in einem Winkel von 19 Grad poliert. Die Klinge wird zunächst zweimal auf rotierenden Steinen geschärft und anschließend auf einer Lederscheibe poliert.
Der Griff des Gyutoh ist aus Maser-Birke gefertigt, um jedem Messer eine einzigartige Holzmaserung zu verleihen. Eine Endkappe und ein dezent gestylter Mosaikstift runden den eleganten Look des Messers ab. Der Griff ist D-förmig, um dem Messer perfekte Balance und Kontrolle für müheloses und präzises Schneiden zu geben. Die Klinge hat ein wunderschönes Damastmuster und einen harten Kern aus MicroCarbide MC63-Pulverstahl, der in 100 Schichten aus zwei verschiedenen Stählen eingeschlossen ist. Die CRYODUR®-Klinge wird bei -196 Grad Celsius eisgehärtet, um eine Härte von etwa 63 Rockwell zu erreichen, die die Klinge scharf und flexibel hält. Es wird empfohlen, nur von Hand zu waschen, auf einem Schleifstein zu pflegen und zu schärfen, und die Verwendung von Glas-, Keramik- oder Steinschneidebrettern sollte vermieden werden.
Zwilling Miyabi 5000MCD Gyutoh Kochmesser aus Japan. Es gibt nur die besten Küchenmesser im Sortiment von MyGoodKnife.
333,15 €
370,16 €

Sold out

-10% Sold out
Santoku Japanisches Messer Kenshiro Hatono Red lacquer 16.5cm HRS
Santoku knife handmade by Kenshiro Hatono. Blade 165 mm made od damascus steel with VG10 core. Traditional handle made of red lacquer. Kenshiro Hatono is a knife maker from Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
150,97 €
167,74 €

Sold out

-10% Sold out
Santoku Japanisches Messer Kenshiro Hatono Black lacquer 16.5cm HBS
Japanese santoku knife handmade by Kenshiro Hatono. Blade 165 mm made od damascus steel with VG10 core. Black lacquer handle. Kenshiro Hatono is a knife maker from Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
150,97 €
167,74 €

Sold out

-10% Sold out
Gyuto Japanisches Messer TOJIRO Atelier 21cm TA-CH210
Gyuto japanese knife Tojiro Forged with 210 mm damascus balde. The gyuto is a Japanese designed chef’s knife. New series from Tojiro are hand forged by masters of Tojiro Atelier. This chef knife has classic kitchen knife's handle made of reinforced laminated material. Unique damascus blade with black finish. Tojiro knives of this exclusive series are forged by hands, using same method as japanese swords traditionally were made.
319,35 €
354,84 €

Sold out

-10% Sold out
Nakiri Japanisches Messer Tojiro Atelier 16.5cm TA-VE165
Special japanese Nakiri knife Tojiro Forged with 165 mm balde. A nakiri knife, also known as a nakiri bocho, is a Japanese-style knife used for chopping vegetables. New exclusive series from Tojiro are hand forged by masters of Tojiro Atelier. This nakiri knife has classic kitchen knife's handle made of reinforced laminated material. Unique damascus blade with black finish. Tojiro knives of this exclusive series are forged by hands, using same method as japanese swords traditionally were made.
284,52 €
316,13 €

Sold out