Ittetsu Knives

Filter by
Categories
Price
€ €
Country
Steel
Handle
Blade Length, mm
Hardness
Filter
Gyuto Japanese kitchen knife Ittetsu IWK-105 21cm
New
Gyuto Kitchen knife Ittetsu 21cm IWK-105
Western style gyuto chef knife with 21 cm blade. Weight 370 g. This Japanese kitchen knife has a blade made of AUS-10 steel. Ittetsu chef knife has a western handle made of pakka wood. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
€142.63

In stock

Santoku Japanese kitchen knife Ittetsu Aogami Super IWK-002 18cm
New
Santoku Kitchen knife Ittetsu Aogami Super 18cm IWK-002
Ittetsu Santoku knife with 18 cm blade. Blade is made of Aogami Super steel blade with stainless steel clad. Handle is made of black pakka wood. This santoku Japanese knife weights about 160 g. Ittetsu knives are handmade in Echizen city, Japan. Santoku is a double-beveled multi-proposal Japanese knife.
€126.69

In stock

Gyuto Japanese kitchen knife Ittetsu Aogami 2 S/S Clad ISW-09 24cm
Gyuto Kitchen knife Ittetsu Aogami 2 S/S Clad 24cm ISW-09
Gyuto Japanese kitchen knife Ittetsu Aogami 2 S/S Clad ISW-09 from Ittetsu knife with a 24 cm blade for any task in the kitchen. Octagonal handle is made of walnut. The bolster is made of Macassar ebony. The blade is made of Aogami #2 with stainless steel clad, Nashiji finnish. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance.  This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan.
€176.61

In stock

Deba Japanese kitchen knife Ittetsu Shirogami 2 IJF-11107 16.5cm
Deba Kitchen knife Ittetsu Forge-welded Shirogami 2 16.5cm IJF-11107
The japanese kitchen knife Ittetsu Deba IJF-11107 with 165 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€104.03

In stock

Japanese kitchen knife Ittetsu Usuba Shirogami 2 IJF-11140 16.5cm
Kitchen knife Ittetsu Usuba Forge-welded 16.5cm IJF-11140
Designed specifically for cutting vegetables the Japanese kitchen knife Ittetsu Usuba IJS-1114O with 165 mm forge-welded blade made of Shirogami #2 carbon steel. As another tool in the kitchen, the Usuba knife can become invaluable when preparing traditional Japanese cuisine. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€112.10

In stock

Gyuto Japanese kitchen knife Ittetsu VG-10 Damascus IWZ-103 18cm
Gyuto Kitchen knife Ittetsu Sandvik 19C27 18cm IWZ-103
Excellent japanese knife Gyuto IWZ-103 from Ittetsu with a blade length of 18 cm for any task in the kitchen. The octagonal handle is made of pakkawood wood. The blade is made of high quality VG10 Damascus steel, hammer finish. This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 230 gr.
€120.16

In stock

Japanese kitchen knife Gyuto Ittetsu Aogami 2
Gyuto Kitchen knife Ittetsu Aogami 2 S/S Clad 18cm ISW-16
The perfect Gyuto  Aogami 2 S/S Clad ISW-16 from Ittetsu knife with a 18 cm blade for any task in the kitchen. Octagonal handle is made of walnut. The bolster is made of Macassar ebony. The blade is made of Aogami #2 with stainless steel clad, Nashiji finnish. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance.  This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 345 gr.
€149.19

In stock

Japanese kitchen knife Sujihiki Ittetsu Tadafusa OEM Aogami 2
Sujihiki Kitchen knife Ittetsu Aogami 2 S/S Clad 27cm ISN-11
Sujihiki Ittetsu OEM Aogami 2 ISN-11 knife with 27 cm blade. The blade is made of Aogami #2 with stainless steel clad, Nashiji finnish. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance. Handle is made of walnut. This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 440 gr.
€201.61

In stock

Japanese kitchen knife Gyuto Ittetsu VG-10 Damascus IWZ-105 24cm
Gyuto Kitchen knife Ittetsu VG-10 Damascus 24cm IWZ-105
Gyuto IWZ-105 from Ittetsu is a Japanese-designed chef's knife with a blade length of 24 cm, designed for chopping and slicing meat, fish, fruits and vegetables. The octagonal handle is made of pakkawood wood. The blade is made of high quality VG10 Damascus steel, hammer finish. This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 270 gr.
€140.32

In stock

Japanese kitchen knife Gyuto Ittetsu Tadafusa OEM Aogami 2
Gyuto Kitchen knife Ittetsu Aogami 2 S/S Clad 24cm ISN-15
The perfect Gyuto Ittetsu OEM Aogami 2 S/S Clad ISN-15 knife with a 24 cm blade for any task in the kitchen. Handle is made of walnut. The blade is made of Aogami #2 with stainless steel clad, Nashiji finnish. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance.  This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 450 gr.
€197.58

In stock

Japanese kitchen knife Gyuto Ittetsu Tall Shirogami IW-11844 21cm
Gyuto Kitchen knife Ittetsu Tall Shirogami 21cm IW-11844
Tall gyuto chef knife with a wide 60x210 mm blade. Weight 440 g. This kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
€149.19

In stock

Japanese kitchen knife Bunka Ittetsu Tall Shirogami IW-11843 21cm
Bunka Kitchen knife Ittetsu Tall Shirogami 21cm IW-11843
Tall bunka knife with a wide 60x210 mm blade. Weight 450 g. This kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
€181.45

In stock

Japanese kitchen knife Bunka Ittetsu Tall Shirogami IW-11842 18cm
Bunka Kitchen knife Ittetsu Tall Shirogami 18cm IW-11842
Tall bunka knife with a wide 57x180 mm blade. Weight 400 g. This kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
€149.19

In stock

Japanese kitchen knife Ittetsu Usuba Shirogami 2 IJF-15141 18cm
Kitchen knife Ittetsu Usuba Shirogami 2 18cm IJF-15141
 Usuba knife with 180 mm forge-welded blade made of Shirogami #2 carbon steel. Weight is 400 g. Usuba is a traditional Japanese knife for slicing vegetables. Unlike nakiri, usuba is a single-beveled knife. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€157.26

In stock

Japanese kitchen knife Ittetsu Usuba Shirogami 2 IJF-15140 16.5cm
Kitchen knife Ittetsu Usuba Shirogami 2 16.5cm IJF-15140
 Usuba knife by Ittetsu has 165 mm forge-welded blade made of Shirogami #2 carbon steel. Weight is 310 g. Usuba is a traditional Japanese knife for slicing vegetables. Unlike nakiri, usuba is a single-beveled knife. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€149.19

In stock

Japanese kitchen knife Yanagiba Ittetsu Forge-welded Shirogami 2 IJF-15123 21cm
Yanagiba Kitchen knife Ittetsu Forge-welded Shirogami 2 21cm IJF-15123
 This sushi knife by Ittetsu has 210 mm forge-welded blade made of Shirogami #2 carbon steel. Weight is 350 g. The oval shaped handle is made of magnolia wood.  Yanagiba knives are primarily used to slice boneless fish fillets for Sashimi and Sushi dishes. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€133.06

In stock

Japanese kitchen knife Yanagiba Ittetsu Forge-welded Shirogami 2 IJF-15122 18cm
Yanagiba Kitchen knife Ittetsu Forge-welded Shirogami 2 18cm IJF-15122
 This Yanagiba knife by Ittetsu has 180 mm forge-welded blade made of Shirogami #2 carbon steel. Weight is 310 g. The oval shaped handle is made of magnolia wood.  Yanagiba knives are primarily used to slice boneless fish fillets for Sashimi and Sushi dishes. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€125.00

In stock

Japanese kitchen knife Deba Ittetsu Forge-welded Shirogami 2 IJF-15112 24cm
Deba Kitchen knife Ittetsu Forge-welded Shirogami 2 24cm IJF-15112
Large Deba knife by Ittetsu has 240 mm forge-welded blade made of Shirogami #2 carbon steel.  Weight is 700 g. The oval shaped handle is made of magnolia wood.  Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€282.26

In stock

Japanese kitchen knife Deba Ittetsu Forge-welded Shirogami 2 for left-handed IJF-15108L 18cm
Deba Kitchen knife Ittetsu Forge-welded Shirogami 2 for left-handed 18cm IJF-15108L
 This Deba knife is made for left-handed. Knife has 180 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood.  Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€193.55

In stock

Japanese kitchen knife Ittetsu Tadafusa OEM Honesuki Aogami 2 ISN-08 15cm
Kitchen knife Ittetsu Honesuki Aogami 2 15cm ISN-08
Ittetsu Honesuki knife with 15 cm blade. Honesuki is specifically designed for de-boning and breaking down poultry, but is also capable of filleting fish or meat and carrying out many tasks. Blade is made of Aogami 2 steel. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance. Handle is antibacterial bubinga. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
€152.42

In stock

Deba Japanese kitchen knife Ittetsu Forge-welded Shirogami 2 for left-handed IJF-11108L 18cm
Deba Kitchen knife Ittetsu Forge-welded Shirogami 2 for left-handed 18cm IJF-11108L
 Ittetsu Deba knife IJF-11108L with 180 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. The blade is single bevel and this model is made for left-handed. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€161.29

In stock

Yanagiba Japanese kitchen knife Ittetsu Forge-welded Shirogami 2 IJF-15125 27cm
Yanagiba Kitchen knife Ittetsu Forge-welded Shirogami 2 27cm IJF-15125
 This Yanagiba knife by Ittetsu has 270 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood.  Yanagiba knives are primarily used to slice boneless fish fillets for Sashimi and Sushi dishes. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€185.48

In stock

Yanagiba Japanese kitchen knife Ittetsu Forge-welded Shirogami 2 IJF-15124 24cm
Yanagiba Kitchen knife Ittetsu Forge-welded Shirogami 2 24cm IJF-15124
 Yanagiba knife by Ittetsu has 240 mm forge-welded blade made of Shirogami #2 carbon steel. Yanagiba knives are primarily used to slice boneless fish fillets for Sashimi and Sushi dishes. The oval shaped handle is made of magnolia wood.  Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€136.29

In stock

Deba Japanese kitchen knife Ittetsu Forge-welded Shirogami 2 IJF-15108 18cm
Deba Kitchen knife Ittetsu Forge-welded Shirogami 2 18cm IJF-15108
 This Deba knife by Ittetsu has 180 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood.  Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€136.29

In stock

Ittetsu knives are handcrafted in Echizen, Japan by various master blacksmiths. The knife blades are made of three-layer steel with an inner layer of Shirogi and are hardened to approximately 60 HRC. The octagonal grips are made of walnut and equipped with a pakka wood clip. The Kurouchi finish makes the knives look classically Japanese and a little more rustic. The sharpness and stability of the blade is excellent, so the good value for money of these high quality knives should be emphasized.