Ittetsu Knives

Filter by
Categories
Price
€ €
Country
Steel
Handle
Blade Length, mm
Hardness
Filter
Gyuto Japanese kitchen knife Ittetsu Shirogami IW1189 24cm
Gyuto Kitchen knife Ittetsu Shirogami 24cm IW1189
Gyuto knife Ittetsu with 24 cm blade. Blade is made of Shirogami Iron Clad steel. Handle: waterproof mono octagonal walnut. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. For Ittetsu gyuto knife recommended hand wash with warm water and towel dry. The Gyuto is the Japanese equivalent to a standard western style chef's knife and is an essential for the professional cook/chef.
€169.35

In stock

Japanese kitchen knife Ittetsu Petty IW1183 15cm - 1
Kitchen knife Ittetsu Petty 15cm IW-1183
Japanese Petty knife Ittetsu with 150 mm blade. Blade is made of Shirogami Iron Clad steel. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
€108.87

In stock

Deba Japanese kitchen knife Ittetsu Shirogami 2 IJF-11107 16.5cm
Sold out
Deba Kitchen knife Ittetsu Forge-welded Shirogami 2 16.5cm IJF-11107
The japanese kitchen knife Ittetsu Deba IJF-11107 with 165 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€104.03

Sold out

Japanese kitchen knife Gyuto Ittetsu Aogami 2
Sold out
Gyuto Kitchen knife Ittetsu Aogami 2 S/S Clad 18cm ISW-16
The perfect Gyuto  Aogami 2 S/S Clad ISW-16 from Ittetsu knife with a 18 cm blade for any task in the kitchen. Octagonal handle is made of walnut. The bolster is made of Macassar ebony. The blade is made of Aogami #2 with stainless steel clad, Nashiji finnish. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance.  This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 345 gr.
€149.19

Sold out

Japanese kitchen knife Gyuto Ittetsu VG-10 Damascus IWZ-104 21cm
Sold out
Gyuto Kitchen knife Ittetsu VG-10 Damascus 21cm IWZ-104
An excellent knife Gyuto IWZ-104 from Ittetsu with a blade length of 21 cm for chopping and slicing fish, meat, vegetables and fruits. The blade is made of high quality VG10 Damascus steel, hammer finish. The octagonal handle is made of pakkawood wood. This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 250 gr.
€129.03

Sold out

Japanese kitchen knife Ittetsu Tadafusa OEM Honesuki Aogami 2 ISN-08 15cm
Sold out
Kitchen knife Ittetsu Honesuki Aogami 2 15cm ISN-08
Ittetsu Honesuki knife with 15 cm blade. Honesuki is specifically designed for de-boning and breaking down poultry, but is also capable of filleting fish or meat and carrying out many tasks. Blade is made of Aogami 2 steel. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance. Handle is antibacterial bubinga. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
€152.42

Sold out

Japanese kitchen knife Ittetsu Tadafusa OEM Honesuki Aogami 2 ISW-06 15cm
Sold out
Kitchen knife Ittetsu Honesuki Aogami 2 15cm ISW-06
Ittetsu Honesuki knife with 15 cm blade. Honesuki is specifically designed for de-boning and breaking down poultry, but is also capable of filleting fish or meat and carrying out many tasks. Blade is made of Aogami 2 steel. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance. Handle is made of walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
€120.16

Sold out

Sujihiki Japanese kitchen knife Ittetsu Shirogami Iron Clad IW-11812Z 24cm
Sold out
Sujihiki Kitchen knife Ittetsu Shirogami Iron Clad 24cm IW-11812Z
The Japanese double edge slicing knife Ittetsu Sujihiki IW-11812Z  with 240 mm blade. This blade is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle is made of waterproof mono octagonal Keyaki (Zelkova). Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
€116.94

Sold out

Japanese kitchen knife Ittetsu Mioroshi Shirogami 2 IJF-11115 21cm
Sold out
Kitchen knife Ittetsu Mioroshi Forge-welded 21cm IJF-11115
Japanese kitchen Ittetsu Mioroshi IJF-11115  knife with 210 mm forge-welded blade made of Shirogami #2 carbon steel. Mioroshi is perfectly suited to filleting and portioning fish, but it can also slice fish quite well. Mioroshi is a knife like a cross between a sashimi knife and a deba knife. The blade is long and is thicker than shobu but thinner than deba. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry. Ittetsu knives are handmade in Echizen city, Japan.
€125.00

Sold out

Deba Japanese kitchen knife Ittetsu Shirogami 2 IJF-11110 21cm
Sold out
Deba Kitchen knife Ittetsu Forge-welded Shirogami 2 21cm IJF-11110
The japanese kitchen knife Ittetsu Deba IJF-11110 with 210 mm polished blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€192.74

Sold out

Bunka Japanese kitchen knife Ittetsu Tadafusa OEM Aogami 2 ISN-13 17cm
Sold out
Bunka Kitchen knife Ittetsu Aogami 2 17cm ISN-13
Bunka Japanese kitchen knife Ittetsu Aogami 2 ISN-13 with 17 cm blade. Blade is made of Aogami 2 steel. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance. Handle is antibacterial bubinga. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
€144.35

Sold out

Japanese kitchen knife Ittetsu Usuba Shirogami 2 IJF-11141 18cm
Sold out
Kitchen knife Ittetsu Usuba Forge-welded 18cm IJF-11141
Designed specifically for cutting vegetables the Japanese kitchen knife Ittetsu Usuba IJS-11141 with 180 mm forge-welded blade made of Shirogami #2 carbon steel. As another tool in the kitchen, the Usuba knife can become invaluable when preparing traditional Japanese cuisine. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€108.87

Sold out

Yanagiba Japanese kitchen knife Ittetsu Shirogami 2 IJF-11127 33cm
Sold out
Yanagiba Kitchen knife Ittetsu Forge-welded Shirogami 2 33cm IJF-11127
The japanese knife Ittetsu Yanagiba IJF-11127 with 330 mm blade. This knife has a bevel on only one side of the blade, to help achieve even slices. Forge-welded blade is made of Shirogami #2 carbon steel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. Handle is made from magnolia and has good water resistance. Ittetsu knives are handmade in Echizen city, Japan.
€233.87

Sold out

Yanagiba Japanese kitchen knife Ittetsu Shirogami 2 IJF-11125 27cm
Sold out
Yanagiba Kitchen knife Ittetsu Forge-welded Shirogami 2 27cm IJF-11125
The japanese knife Ittetsu Yanagiba IJF-11125 with 270 mm blade. Forge-welded blade is made of Shirogami #2 carbon steel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. Handle is made from magnolia and has good water resistance. This knife has a bevel on only one side of the blade, to help achieve even slices. Ittetsu knives are handmade in Echizen city, Japan.
€143.55

Sold out

Yanagiba Japanese kitchen knife Ittetsu Shirogami 2 IJF-11124 24cm
Sold out
Yanagiba Kitchen knife Ittetsu Forge-welded Shirogami 2 24cm IJF-11124
The japanese knife Ittetsu Yanagiba IJF-11124 with 240 mm blade. Handle is made from magnolia and has good water resistance. Forge-welded blade is made of Shirogami #2 carbon steel. This knife has a bevel on only one side of the blade, to help achieve even slices. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. Ittetsu knives are handmade in Echizen city, Japan.
€111.29

Sold out

Japanese kitchen knife Ittetsu Mioroshi Shirogami 2 IJF-11116 24cm
Sold out
Kitchen knife Ittetsu Mioroshi Forge-welded 24cm IJF-11116
Japanese kitchen Ittetsu Mioroshi IJF-11116  knife with 240 mm forge-welded blade made of Shirogami #2 carbon steel. Mioroshi is perfectly suited to filleting and portioning fish, but it can also slice fish quite well. Mioroshi is a knife like a cross between a sashimi knife and a deba knife. The blade is long and is thicker than shobu but thinner than deba. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry. Ittetsu knives are handmade in Echizen city, Japan.
€135.00

Sold out

Gyuto Japanese kitchen knife Ittetsu IS-44 21cm
Sold out
Gyuto Kitchen knife Ittetsu 21cm IS-44
Ittetsu gyuto with 210 mm blade. The Gyuto is the Japanese version of the classic Western Chef's knife. The difference is that the gyuto's blade is thinner and holds a sharper edge.  Blade is made of SLD steel by Hitachi. SLD is a cold work die steel with high abrasion resistance for general use, excellent harden-ability and minimal quench stress. Handle: ashtree / quince. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
€153.23

Sold out

Yanagiba Japanese kitchen knife Ittetsu Uraoshi Stamped Shirogami 2 IJS-11125 27cm
Sold out
Yanagiba Kitchen knife Ittetsu Uraoshi Stamped Shirogami 2 27cm IJS-11125
 Polished blade the knife Ittetsu Uraoshi Yanagiba IJS-11125 is made of Shirogami #2 carbon steel. The blade lenght is 270mm. Handle is made from magnolia and has good water resistance. This knife has a bevel on only one side of the blade, to help achieve even slices. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€96.77

Sold out

Yanagiba Japanese kitchen knife Ittetsu Uraoshi Stamped Shirogami 2 IJS-11124 24cm
Sold out
Yanagiba Kitchen knife Ittetsu Uraoshi Stamped Shirogami 2 24cm IJS-11124
The japanese knife Ittetsu Uraoshi Yanagiba IJS-11124 with 240mm blade. Polished blade is made of Shirogami #2 carbon steel. Handle is made from magnolia and has good water resistance. This knife has a bevel on only one side of the blade, to help achieve even slices. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€79.03

Sold out

Japanese kitchen knife Ittetsu Uraoshi Usuba Stamped IJS-11143 21cm
Sold out
Kitchen knife Ittetsu Uraoshi Usuba Stamped 21cm IJS-11143
Designed specifically for cutting vegetables the Japanese kitchen knife Ittetsu Uraoshi Usuba. This 21 cm polished blade is made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€137.10

Sold out

Japanese kitchen knife Ittetsu Uraoshi Ajikiri Stamped IJS-11101 10.5cm
Sold out
Kitchen knife Ittetsu Uraoshi Ajikiri Stamped 10.5cm IJS-11101
Ajikiri is used for small fish, meat and vegetable. Also it's a paring knife in the can be used as a small paring knife. Japanese kitchen knife Ajikiri Ittetsu IJS-11101 with 105 mm polished blade made of Shirogami #2 carbon steel. The blade is single bevel Uraoshi. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€55.65

Sold out

Nakiri Japanese kitchen knife Ittetsu Shirogami Tall IW-11839 18cm
Sold out
Nakiri Kitchen knife Ittetsu Shirogami Tall 18cm IW-11839
Japanese Tall Nakiri knife Ittetsu with 180 mm blade. Tall nakiris are longer and taller than a normal nakiri knife. This one is 65 mm tall.  This nakiri is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
€144.35

Sold out

Bunka Japanese kitchen knife Ittetsu Shirogami IW-11835 18cm
Sold out
Bunka Kitchen knife Ittetsu Shirogami 18cm IW-11835
Japanese bunka knife Ittetsu with 180 mm blade. This kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
€136.29

Sold out

Japanese kitchen knife Ittetsu Honesuki Black Pakka wood IWY-9009 15cm
Sold out
Kitchen knife Ittetsu Honesuki Black Pakka wood 15cm IWY-9009
Honesuki knife from Ittetsu with 15 cm blade. The blade is made of stainless Sandvik 19C27 steel. Handle is black pakka wood. Honesuki is specifically designed for de-boning and breaking down poultry, but many people have found the knife is also capable of filleting fish and red meat, or carrying out many of the tasks. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. 
€95.97

Sold out

Ittetsu knives are handcrafted in Echizen, Japan by various master smiths. Most Ittetsu Japanese kitchen knives feature a triple-layer steel blade with an inner layer of Shirogami steel and are hardened to approximately 60 HRC. The Kurouchi finish gives the knives a classic Japanese look and a slightly more rustic feel. If you are looking for an authentic and affordable Japanese kitchen knife, Ittetsu is a great choice. The sharpness and durability of the blade are excellent, so it is worth emphasizing the good value for money of these high-quality knives. Ittetsu has all the popular models of Japanese kitchen knives: santoku, gyuto chef's knife, nakiri, yanagiba and others.