Carbon Knives

Carbon steel kitchen knives are valued by chefs and cooking enthusiasts for their exceptional sharpness and ease of sharpening. Carbon steels, from which kitchen knives are made, usually contains from 0.5% to 1.5% carbon.

Among the well-known carbon steels, we can highlight Japanese Shirogami (White Steel) and Aogami (Blue Steel), as well as European and American: 440C, 1095, 1055.

One of the main advantages of carbon steel knives is their ability to achieve an ultra-thin cutting edge. In addition, they are very easy to sharpen, especially on whetstones. You can buy various sharpeners, including whetstones, in our store.

However, kitchen knives made of carbon steel require special care, as they are subject to corrosion. After each use, the blade must be washed by hand and wiped dry. When in contact with acidic foods (lemon, tomatoes) - rinse immediately. Long-term exposure to moisture leads to rust. Carbon steel knives cannot be washed in the dishwasher.

Please note that rust on a carbon steel knife is not a warranty case. Often, a patina appears on such knives. This is not rust. Patina is an oxide layer that protects the metal from corrosion. Unlike rust, patina is dense and stable, and it does not destroy the metal. Patina appears as a result of oxidation of iron when in contact with moisture and acidic substances. The color of the patina can vary - from light gray to dark blue or even black.

To ensure that carbon steel knives serve for a long time, it is important to follow basic care rules: do not leave them wet, wipe them thoroughly after use, periodically lubricate with mineral oil. You can buy care and maintenance products for carbon steel knives in a special section of our store.

-15% Sold out
Yanagiba Kitchen knife Ittetsu Forge-welded Shirogami 2 for left-handed 21cm IJF-11123L
The japanese knife Ittetsu Yanagiba Forge-welded Shirogami 2 for left-handed IJF-11123L with 210 mm blade. Handle is made from magnolia and has good water resistance. This knife has a bevel on only one side of the blade, to help achieve even slices. Forge-welded blade is made of Shirogami #2 carbon steel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. Ittetsu knives are handmade in Echizen city, Japan.
€150.55
€177.12

Sold out

-15% Sold out
Gyuto Kitchen knife Tsutomu Kajiwara 21cm TK-1123
Japanese Chef knife gyuto handmade by Tsutomu Kajiwara. Blade 21 cm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
€197.86
€232.78

Sold out

-15% Sold out
Kitchen knife Ittetsu Mioroshi Forge-welded 21cm IJF-11115
Japanese kitchen Ittetsu Mioroshi IJF-11115  knife with 210 mm forge-welded blade made of Shirogami #2 carbon steel. Mioroshi is perfectly suited to filleting and portioning fish, but it can also slice fish quite well. Mioroshi is a knife like a cross between a sashimi knife and a deba knife. The blade is long and is thicker than shobu but thinner than deba. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry. Ittetsu knives are handmade in Echizen city, Japan.
€133.34
€156.88

Sold out

-15% Sold out
Gyuto Kitchen knife Daisuke Nishida Shirogami Bocote 18cm DN-11212BGA
Gyuto Japanese chef knife handmade by Daisuke Nishida. Blade length 180 mm. Blade of this chef knife is made of Shirogami carbon steel with iron clad. Daisuke Nishida gyuto has handle made of bocote wood. This  knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by Japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. Daisuke Nishida knives due to hand-made may slightly differ from the pictures and dimensions shown. 
€146.25
€172.06

Sold out

-15% Sold out
Yanagiba Kitchen knife Hideo Kitaoka Shirogami 24cm CN-2208
Handmade yanagiba knife by Mr. Hideo Kitaoka with a great Shirogami carbon steel on the 24 cm blade. Handle made of a natural pakkawood. The Yanagiba is a Japanese single-beveled knife, originally designed for sushi and sashimi. Hideo Kitaoka in Takefu, Fukui Province specializes in the production of high-quality single-edged kitchen knives. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
€154.85
€182.18

Sold out

-15% Sold out
Kitchen knife Ittetsu Usuba Forge-welded 18cm IJF-11141
Designed specifically for cutting vegetables the Japanese kitchen knife Ittetsu Usuba IJS-11141 with 180 mm forge-welded blade made of Shirogami #2 carbon steel. As another tool in the kitchen, the Usuba knife can become invaluable when preparing traditional Japanese cuisine. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€116.14
€136.63

Sold out

-15% Sold out
Yanagiba Kitchen knife Ittetsu Forge-welded Shirogami 2 33cm IJF-11127
The japanese knife Ittetsu Yanagiba IJF-11127 with 330 mm blade. This knife has a bevel on only one side of the blade, to help achieve even slices. Forge-welded blade is made of Shirogami #2 carbon steel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. Handle is made from magnolia and has good water resistance. Ittetsu knives are handmade in Echizen city, Japan.
€249.48
€293.51

Sold out

-15% Sold out
Yanagiba Kitchen knife Ittetsu Forge-welded Shirogami 2 27cm IJF-11125
The japanese knife Ittetsu Yanagiba IJF-11125 with 270 mm blade. Forge-welded blade is made of Shirogami #2 carbon steel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. Handle is made from magnolia and has good water resistance. This knife has a bevel on only one side of the blade, to help achieve even slices. Ittetsu knives are handmade in Echizen city, Japan.
€153.13
€180.15

Sold out

-15% Sold out
Yanagiba Kitchen knife Ittetsu Forge-welded Shirogami 2 24cm IJF-11124
The japanese knife Ittetsu Yanagiba IJF-11124 with 240 mm blade. Handle is made from magnolia and has good water resistance. Forge-welded blade is made of Shirogami #2 carbon steel. This knife has a bevel on only one side of the blade, to help achieve even slices. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. Ittetsu knives are handmade in Echizen city, Japan.
€118.72
€139.67

Sold out

-15% Sold out
Yanagiba Kitchen knife Ittetsu Forge-welded Shirogami 2 21cm IJF-11123
The japanese knife Ittetsu Yanagiba IJF-11123 with 210 mm blade. Forge-welded blade is made of Shirogami #2 carbon steel. Handle is made from magnolia and has good water resistance. This knife has a bevel on only one side of the blade, to help achieve even slices. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. Ittetsu knives are handmade in Echizen city, Japan.
€105.81
€124.49

Sold out

-15% Sold out
Kitchen knife Ittetsu Mioroshi Forge-welded 24cm IJF-11116
Japanese kitchen Ittetsu Mioroshi IJF-11116  knife with 240 mm forge-welded blade made of Shirogami #2 carbon steel. Mioroshi is perfectly suited to filleting and portioning fish, but it can also slice fish quite well. Mioroshi is a knife like a cross between a sashimi knife and a deba knife. The blade is long and is thicker than shobu but thinner than deba. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry. Ittetsu knives are handmade in Echizen city, Japan.
€144.01
€169.43

Sold out

-15% Sold out
Gyuto Kitchen knife Matsubara Hamono Aogami 24cm KT-205
A chef's knife by master craftsman Katsuto Tanaka, who makes knives under the Matsubara Hamono brand. The 24 cm blade is crafted from three layers. The core is Aogami #2 Blue Paper steel. The traditional Japanese Wa handle is octagonal and made of walnut wood. The knife is not dishwasher safe. It comes in a branded box.
€225.25
€265.00

Sold out

-15% Sold out
Yanagiba Kitchen knife Ittetsu Uraoshi Stamped Shirogami 2 27cm IJS-11125
 Polished blade the knife Ittetsu Uraoshi Yanagiba IJS-11125 is made of Shirogami #2 carbon steel. The blade lenght is 270mm. Handle is made from magnolia and has good water resistance. This knife has a bevel on only one side of the blade, to help achieve even slices. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€103.23
€121.45

Sold out

-15% Sold out
Yanagiba Kitchen knife Ittetsu Uraoshi Stamped Shirogami 2 24cm IJS-11124
The japanese knife Ittetsu Uraoshi Yanagiba IJS-11124 with 240mm blade. Polished blade is made of Shirogami #2 carbon steel. Handle is made from magnolia and has good water resistance. This knife has a bevel on only one side of the blade, to help achieve even slices. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€84.31
€99.19

Sold out

-15% Sold out
Kitchen knife Ittetsu Uraoshi Usuba Stamped 21cm IJS-11143
Designed specifically for cutting vegetables the Japanese kitchen knife Ittetsu Uraoshi Usuba. This 21 cm polished blade is made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€146.25
€172.06

Sold out

-15% Sold out
Santoku Kitchen knife Yu Kurosaki Fujin VG10 Damascus Wenge 16.5cm ZVD-165SAW
Yu Kurosaki Santoku knife with wenge wood handle. Yu Kurosaki Fujin series fearture Nickel Damascus-patterned blades with a core of VG-10 stainless steel for professional with a hardness of 60-61 HRC, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Santoku Fujin VG10 Damascus Series is made of Octagonal-shaped wenge wood. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
€229.70
€270.23

Sold out

-15% Sold out
Kitchen knife Hideo Kitaoka Honesuki 15cm Ao2
Handmade honesuki knife by Mr. Hideo Kitaoka. Aogami steel with iron clad. Handle made of rosenwood. The Honesuki is a Japanese style boning knife. Originally designed for poultry. Hideo Kitaoka in Takefu, Fukui Province specializes in the production of high-quality single-edged kitchen knives. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
€206.47
€242.90

Sold out

-15% Sold out
Yanagiba Kitchen knife Ryusen Hamono Houenryu 27cm HE-308
Yanagiba Houenryu is an exclusive knife created by Ryusen Hamono to commemorate the opening of their impressive new factory and boutique in Echizen, Fukui Prefecture. The blade is completely made of Damascus steel, which consists of stainless VG-10 and VG-2. The backside of the knife is thinner than on most yanagi knives and gives a sharper edge to the touch and makes it easier to slide over fish. The handle is crafted from a solid piece of walnut wood with a mosaic pin on one side and the Ryusen logo on the other. The knife comes in a beautiful box.
€2,752.90
€3,238.71

Sold out

-15% Sold out
Nakiri Kitchen knife Ittetsu Shirogami Tall 18cm IW-11839
Japanese Tall Nakiri knife Ittetsu with 180 mm blade. Tall nakiris are longer and taller than a normal nakiri knife. This one is 65 mm tall.  This nakiri is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
€153.99
€181.17

Sold out

-15% Sold out
Bunka Kitchen knife Ittetsu Shirogami 18cm IW-11835
Japanese bunka knife Ittetsu with 180 mm blade. This kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
€145.39
€171.04

Sold out

-15% Sold out
Sujihiki Kitchen knife Tsutomu Kajiwara 27cm TK-1128
Japanese kitchen knife sujihiki handmade by Tsutomu Kajiwara. Blade 27 cm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. The Sujihiki is a double edge slicing knife with a long narrow blade that smoothly slices through meat or vegetables and preserves the integrity of each ingredient's freshness. The Sujihiki slicer can carve and fabricate large roasts and other meats and fish, and can be used for thinly slicing other ingredients. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife.
€215.07
€253.02

Sold out

-15% Sold out
Gyuto Kitchen knife Ittetsu Shirogami 18cm IW1187
Japanese chef knife gyuto Ittetsu with 18 cm blade. Blade is made of Shirogami Iron Clad steel. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. The Gyuto is the Japanese equivalent to a standard western style chef's knife and is an essential for the professional cook/chef.
€131.62
€154.85

Sold out

-15% Sold out
Kiritsuke Kitchen knife Tsutomu Kajiwara 24cm TK-1126
Japanese kiritsuke knife handmade by Tsutomu Kajiwara. Blade 24 cm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
€210.77
€247.96

Sold out

-15% Sold out
Kitchen knife Ittetsu Honesuki Shirogami 15cm IW11837
Honesuki knife Ittetsu with 150 mm blade. This honesuki is made from 3 layers of material: iron clad and Shirogami steel. Honesuki is specifically designed for de-boning and breaking down poultry, but many people have found the knife is also capable of filleting fish and red meat, or carrying out many of the tasks. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
€119.58
€140.68

Sold out