Filtrer
Prix
€ €
Fabricants
Longueur des cordes, mm
Taille
Sex
Pays
Acier
Poignée
Série
Dureté
Etui
Verrouillage
Matériel
Filtrer
Kiritsuke Couteau Japonais Hideo Kitaoka CN4216 24cm
Kiritsuke Couteau de cuisine Hideo Kitaoka 24cm CN4216
Kiritsuke knife 24 sm. Handmade by Mr. Hideo Kitaoka. Damascus blade - 11 layers of Shirogami steel. (White steel), magnolia-wood handle. Blade is sharpened on one side.
233,87 €

En stock

Nakiri Couteau Japonais Goko Hamono OUTLET! Shirogami S/S Clad GHO-004 16.5cm
-20%
Nakiri Couteau de cuisine Goko Hamono OUTLET! Shirogami S/S Clad 16.5cm GHO-004
OUTLET! Le tranchant est ondulé. La lame du couteau est droite. Goko Hamono nakiri knife with is 16,5 cm blade. The nakiri featured here is a perfect example of their philosophy. Utilizing a core of white #1 steel with a stainless cladding, the Goko nakiri is made with a slightly asymmetric edge grind. The steel is hardened to 60 HRC. A lovely rustic finish and oak wood octagonal handle complete the package.
127,74 €
159,68 €

En stock

Deba Couteau Japonais Hideo Kitaoka 11 Layered Shirogami CN1203 16.5cm
Deba Couteau de cuisine Hideo Kitaoka 11 Layered Shirogami 16.5cm CN1203
Custom Deba knife 165 mm. Handmade by Mr. Hideo Kitaoka. Shirogami steel, 11 layers. Blade is sharpened on one side. Handle made from Japanese magnolia wood, which has good water resistance and smooth surface. Deba is traditionally used to clean and fillet whole fish, but it is also commonly used for breaking down and dressing poultry and meats with small bones. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
183,27 €

En stock

Deba Couteau Japonais Hideo Kitaoka 11 Shirogami Layers CN-4205 21cm
Deba Couteau de cuisine Hideo Kitaoka 11 Shirogami Layers 21cm CN-4205
Couteau à poisson Deba de M. Hideo Kitaoka avec la lame composée de 11 couches d'un grand acier au carbone Shirogami. Ce couteau Deba lourd de 0,5 kg a une lame de 21 cm. Manche en bois de rose naturel. Il n'est pas recommandé pour de tels couteaux - de les laver au lave-vaisselle, de les laisser dans l'eau, de les nettoyer avec des liquides acides, de couper des fruits acides comme le citron. Séchez votre couteau à la main : cela doit être fait immédiatement après le lavage avec un torchon propre. Frotter avec de l'huile minérale. Si vous remarquez des taches de rouille, frottez une légère couche d’huile minérale et laissez sécher.
257,26 €

En stock

Japanese kitchen knife Goko Hamono Shirogam
Couteau de cuisine Goko Hamono Shirogami S/S Clad Honesuki 15cm GHO-010
Honesuki 15 cm made by Gokoo Hamono. Honesukis are boning knives specifically designed for parting out poultry. Walnut handle. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
192,74 €

En stock

Santoku Japanese kitchen knife Daisuke Nishida Small Shirogami Bocote DN-11223BGA 12cm
Santoku Couteau de cuisine Daisuke Nishida Small Shirogami Bocote 12cm DN-11223BGA
Small Santoku knife handmade by Daisuke Nishida. 12 cm blade is made of Shirogami carbon steel with iron clad. Daisuke Nishida santoku has handle made of bocote wood. This  knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by Japanese knives bones and meat with bones, coconuts and other nuts, other hard products. Daisuke Nishida knives due to hand-made may slightly differ from the pictures and dimensions shown. 
120,97 €

En stock

Yanagiba Japanese kitchen knife Hideo Kitaoka 11 Shirogami Layers CN-4207 21cm
Yanagiba Couteau de cuisine Hideo Kitaoka 11 Shirogami Layers 21cm CN-4207
Handmade yanagiba knife by Mr. Hideo Kitaoka with 11 layers of a great Shirogami carbon steel on the 21 cm blade. Handle made of a natural rosenwood. The Yanagiba is a Japanese single-beveled knife, originally designed for sushi and sashimi. Hideo Kitaoka in Takefu, Fukui Province specializes in the production of high-quality single-edged kitchen knives. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
193,55 €

En stock

Gyuto Couteau Japonais Daisuke Nishida Shirogami DN-11212 18cm
Gyuto Couteau de cuisine Daisuke Nishida Shirogami 18cm DN-11212
Japanese chef knife gyuto is handmade by Daisuke Nishida. Blade length 180 mm. Blade of this chef knife is made of Shirogami carbon steel. The whole is complemented by a handle made  of cherry wood  finished  with a plastic cap. The structure is extremely light and the D-shaped  handle perfectly fits the hand. Weight is 165 g. This  knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by Japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. Daisuke Nishida knives due to hand-made may slightly differ from the pictures and dimensions shown. 
120,97 €

En stock

Kiritsuke Couteau Japonais Goko Hamono Shirogami S/S Clad GHO-009 20cm
Kiritsuke Couteau de cuisine Goko Hamono Shirogami S/S Clad 20cm GHO-009
Goko Hamono kiritsuke knife with is 20 cm blade. Kiritsuke blades have arguably the most iconic profiles of any blade in the Japanese knife world. The reverse tanto tip gives the knife a very weapon-like appearance. Constructed using a core of white #1 steel and covered with a stainless outer cladding. Comes with a nice oak octagonal handle and a durable pakka wood ferrule.
225,00 €

En stock

Bunka Couteau Japonais Goko Hamono Shirogami S/S Clad GHO-008 17cm
Bunka Couteau de cuisine Goko Hamono Shirogami S/S Clad 17cm GHO-008
Goko Hamono bunka knife with is 17 cm blade. Bunka is a general purpose knife tackling a wide range of common kitchen tasks. Constructed using a core of white #1 steel and covered with a stainless outer cladding. Comes with a nice oak octagonal handle and a durable pakka wood ferrule.
208,87 €

En stock

Gyuto Couteau Japonais Goko Hamono Shirogami S/S Clad GHO-005 18cm
Gyuto Couteau de cuisine Goko Hamono Shirogami S/S Clad 18cm GHO-005
With an overall blade length of 18 cm, the Goko Hamono gyuto is the perfect knife for almost all of your daily cutting and chopping needs. It comes with a lovely rustic blade constructed of white #1 carbon with a cladding of stainless steel. The steel is hardened to 60-61 HRC. A lovely rustic finish and oak wood octagonal handle complete the package.
205,65 €

En stock

Santoku Couteau Japonais Goko Hamono Shirogami S/S Clad GHO-003 16.5cm
Santoku Couteau de cuisine Goko Hamono Shirogami S/S Clad 16.5cm GHO-003
Goko Hamono santoku Japanese kitchen knife with is 16,5 cm blade. Santoku knife is the best model for slicing, dicing and mincing. Constructed using a core of white #1 steel and covered with a stainless outer cladding, this small and nimble knife is the ideal utensil for small slicing and dicing jobs as well as a great tool for those intricate garnishes. Goko Hamono santoku comes with a nice upgraded oak octagonal handle and a durable pakka wood ferrule.
159,68 €

En stock

Petty Couteau Japonais Goko Hamono Shirogami S/S Clad GHO-002 15cm
Petty Couteau de cuisine Goko Hamono Shirogami S/S Clad 15cm GHO-002
Goko Hamono petty Japanese kitchen knife with is 15 cm blade. Petty is the Japanese word for a paring or utility knife, it comes from the French word “petite". Constructed using a core of white #1 steel and covered with a stainless outer cladding, this small and nimble knife is the ideal utensil for small slicing and dicing jobs as well as a great tool for those intricate garnishes. The petty now comes with a nice upgraded oak octagonal handle and a durable pakka wood ferrule.
152,42 €

En stock

Petty Couteau Japonais Goko Hamono Shirogami S/S Clad GHO-001 12cm
Petty Couteau de cuisine Goko Hamono Shirogami S/S Clad 12cm GHO-001
This 120mm Goko Hamono petty is a perfect example of their simple philosophy to blade making. Constructed using a core of white #1 steel and covered with a stainless outer cladding, this small and nimble knife is the ideal utensil for small slicing and dicing jobs as well as a great tool for those intricate garnishes. The petty now comes with a nice upgraded oak octagonal handle and a durable pakka wood ferrule.
128,23 €

En stock

Gyuto Couteau Japonais Goko Hamono Shirogami S/S Clad GHO-007 24cm
Gyuto Couteau de cuisine Goko Hamono Shirogami S/S Clad 24cm GHO-007
Gyuto 240 made by Goko Hamono. This knife is made from 3 layers of steel using a technique called Sanmai (Forge welding). It involves laminating a piece of carbon steel with pieces of stainless steel, which gives the knife all the benefits of the carbon steel (edge retention, ease of sharpening, cutting feel) and the aase of Maintenance from stainless steel. 2-3 millimeters of the carbon steel is exposed at the curring edge of the knife and is susceptible to rust and discoloration if not properly maintained. Oak octagon handle. Hand-dry your knife. This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
241,13 €

En stock

Kiritsuke Japanese kitchen knife Shiraki Hamono Honyaki HRS 24cm - 1
Kiritsuke Couteau de cuisine Shiraki Hamono Honyaki 24cm HRS
Japanese Shiraki Hamono Honyaki kitchen knife is completely handmade. Blade length is 240 mm. The blade is made of Shirogami Japanese carbon steel. A honyaki knife requires tremendous experience and time to make it. Only a small number of craftsmen in the world are able to make a knife like this. Honyaki translates to "properly forged."Honyaki is forged entirely from a single piece of steel. Forging and shaping a knife is very difficult. Steel is rolled and forged many times to evenly distribute carbon.The honyaki knife is tempered unevenly - to higher values ​​(up to HRC64-66) at the cutting edge. In reflected light, the boundary between parts with different hardening is visible and it is called jamon (hamon). The Japanese Honyaki knife requires professionalism in use and sharpening.
1 774,19 €

En stock

Bunka Couteau Japonais Matsubara Hamono Shirogami KT-014 17cm
Sold out
Bunka Couteau de cuisine Matsubara Hamono Shirogami 17cm KT-014
Un couteau bunka conçu par le maître artisan Katsuto Tanaka, fabricant de couteaux pour la marque Matsubara Hamono. Le bunka est un petit couteau de cuisine polyvalent à la pointe acérée. Sa lame de 17 cm est en acier Shirogami. Son manche wa est en noyer. Ce couteau de cuisine japonais ne passe pas au lave-vaisselle. L'acier Shirogami étant riche en carbone, il est conseillé de le laver à la main et de le sécher immédiatement après utilisation. Nous recommandons l'utilisation d'huile de camélia pour l'entretien de la lame.
163,35 €

Sold out

Kiritsuke Couteau Japonais Hideo Kitaoka Shirogami CN-22161 24cm
Sold out
Kiritsuke Couteau de cuisine Hideo Kitaoka Shirogami 24cm CN-22161
Kiritsuke Couteau Japonais Hideo Kitaoka Shirogami. La lame de 24 cm est en acier au carbone avec un noyau en acier Shirogami. Le manche est en bois de pakka naturel. Hideo Kitaoka à Takefu, province de Fukui, est spécialisé dans la production de couteaux de cuisine à un seul tranchant de haute qualité. Veuillez utiliser vos couteaux en carbone avec précaution. Il n'est pas recommandé pour ces couteaux de les laver au lave-vaisselle, de les laisser dans l'eau, de les nettoyer avec des liquides acides, de couper des fruits acides comme le citron. Séchez votre couteau à la main : cela doit être fait immédiatement après le lavage avec un torchon propre. Frottez avec de l'huile minérale. Si vous remarquez des taches de rouille, frottez une légère couche d'huile minérale et laissez sécher. Le couteau a une pointe arrondie.
177,42 €

Sold out

Bunka Couteau Japonais Matsubara Hamono Shirogami Iron clad Walnut KT-003 17cm
Sold out
Bunka Couteau de cuisine Matsubara Hamono Shirogami Iron clad Walnut 17cm KT-003
Couteau Bunka avec lame de 17 cm. Ce couteau est fabriqué à partir de 3 couches d'acier selon une technique appelée Sanmai (soudure à la forge). Il s'agit de laminer un morceau d'acier au carbone avec du fer plaqué. Manche en bois de noyer. Séchez votre couteau à la main. Cela doit être fait immédiatement après le lavage avec un torchon propre. Frottez avec de l'huile minérale. Si vous remarquez des taches de rouille, frottez une légère couche d'huile minérale et laissez sécher. Les couteaux sous le nom de Matsubara Hamono sont fabriqués par le maître forgeron Katsuto Tanaka-san qui a commencé à fabriquer des couteaux à l'âge de 20 ans en 1982. L'histoire de la fabrication de couteaux dans la région de Matsubara remonte à l'année 1474, lorsque Maître Yukiyasu Naminohira s'est installé ici pour fabriquer des épées dans le sanctuaire Hachiman. En utilisant le couteau Hamono Matsubara, évitez les os, les aliments surgelés, les noix et les bonbons durs ou tout autre chose que les fruits, les légumes et autres produits mous.
153,23 €

Sold out

Japanese kitchen knife Bunka Daisuke Nishida Forge-welded Shirogami 1 DN-11225 18cm
Sold out
Bunka Couteau de cuisine Daisuke Nishida Forge-welded Shirogami 1 18cm DN-11225
The Bunka Daisuke Nishida DN-11225 knife is forged by Daisuke Nishida and is one of the greatest, magnificent examples of Japanese knives. Blade 180 mm is made of carbon steel Shirogami No. 1 by forge welding with a black coating. The Daisuke Nishida Bunka has an octagonal walnut handle with a maple ring. The bolster is made of Macassar ebony wood. This knife cannot be washed in the dishwasher. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Daisuke Nishida knives due to handmade may differ slightly from those shown in the photos and sizes. Weight 250 gr.
144,35 €

Sold out

Japanese kitchen knife Daisuke Nishida Funayuki DN-11211 16.5cm
Sold out
Couteau de cuisine Daisuke Nishida Funayuki 16.5cm DN-11211
Le couteau Funayuki DN-11211 a été forgé par Daisuke Nishida et est l'un des magnifiques exemples de couteaux japonais. Le Funayuki était traditionnellement utilisé sur les bateaux de pêche japonais pour cuisiner en haute mer. Il s'agit d'un couteau polyvalent qui est également utile pour fileter et déjouer des poissons de taille moyenne et pour hacher des légumes. Funayuki combine l'apparence d'un deba, d'un nakiri et d'un yagiba. La lame de 165 mm est fabriquée en acier au carbone Shirogami n° 1 avec un revêtement noir. Le Daisuke Nishida Funayuki possède un manche octogonal en bois de noyer avec un anneau en érable. Le traversin est en bois d'ébène de Macassar. Les couteaux Daisuke Nishida ne passent pas au lave-vaisselle. Les couteaux de cuisine japonais ont un tranchant très dur mais fin. Il n'est pas autorisé d'utiliser de tels couteaux pour des produits durs (par exemple, de la viande avec des os, des coquilles de noix de coco et d'autres noix). Les couteaux Daisuke Nishida sont fabriqués à la main et peuvent légèrement différer de ceux présentés sur les photographies. Poids 240 gr.
137,10 €

Sold out

Japanese kitchen knife Goko Hamono Shirogami S/S Clad Honesuki GHO-0101 15cm
Sold out
Couteau de cuisine Goko Hamono Shirogami S/S Clad Honesuki 15cm GHO-0101
Couteau Honesuki, fabriqué à la main par l'atelier Goko Hamono. Le Honesuki est similaire à un couteau à désosser et est destiné à la transformation de la viande. Sa lame de 150 mm de long est en acier Shirogami 1 avec un revêtement en acier inoxydable. Le manche traditionnel japonais wa est en palissandre. Séchez votre couteau à la main : faites-le immédiatement après le lavage avec un torchon propre. Frottez avec de l'huile minérale. Si vous remarquez des taches de rouille, appliquez une fine couche d'huile minérale et laissez sécher.
192,74 €

Sold out

Yanagiba Japanese kitchen knife Hideo Kitaoka 11 Shirogami Layers CN-4209 27cm
Sold out
Yanagiba Couteau de cuisine Hideo Kitaoka 11 Shirogami Layers 27cm CN-4209
Yanagiba sushi-knife by Mr. Hideo Kitaoka with 11 layers of a great Shirogami carbon steel on the 27 cm blade. Handle made of a natural rosenwood. The Yanagiba is a Japanese single-beveled knife, originally designed for sushi and sashimi. Hideo Kitaoka in Takefu, Fukui Province specializes in the production of high-quality single-edged kitchen knives. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
257,26 €

Sold out

Kiritsuke Japanese kitchen knife Hideo Kitaoka Shirogami CN-2216 24cm
Sold out
Kiritsuke Couteau de cuisine Hideo Kitaoka Shirogami 24cm CN-2216
Handmade single-beveled kiritsuke knife by Mr. Hideo Kitaoka. 24 cm blade is made of carbon steel with Shirogami steel core Handle made of a natural pakkawood.  Hideo Kitaoka in Takefu, Fukui Province specializes in the production of high-quality single-edged kitchen knives. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
177,42 €

Sold out