Couteaux Santoku

Filtrer
Prix
€ €
Fabricants
Longueur des cordes, mm
Pays
Acier
Poignée
Série
Dureté
Filtrer
Santoku Couteau Japonais TOJIRO F-316 17cm
-15% Sold out
Santoku Couteau Japonais TOJIRO 17cm F-316
Santoku F-316 japonais de la série Tojiro Basic avec une longueur de lame de 17 cm. Lame de en acier 3 couches VG10 (60 HRC) au centre et acier inox sur les flancs. Manche ergonomique en pakkawood. Malgré sa forme en hachoir, il n'est pas indiqué pour couper les os. Un bel emballage cadeau transforme un couteau tojiro en un merveilleux cadeau. Ne coupez pas d'aliments surgelés ni d'os. Lavez votre couteau avec de l'eau tiède et une éponge douce. Si nécessaire, utilisez un détergent neutre. Séchez complètement le couteau avec un chiffon doux. Ne le lavez jamais au lave-vaisselle. Gardez votre couteau bien aiguisé en utilisant des pierres à aiguiser de haute qualité avec le grain approprié. Poids 130 gr.
39,07 €
45,97 €

Sold out

Santoku Couteau Japonais Yoshikane Hamono Shirogami 2 YH-S2S165 16.5cm
-15% Sold out
Santoku Couteau Japonais Yoshikane Hamono Shirogami 2 16.5cm YH-S2S165
Couteau Santoku forgé à la main dans l'atelier Yoshikane Hamono, Japon. La lame est en acier au carbone Shirogami 2 (Blanc 2) avec revêtement en acier inoxydable. Ce couteau santoku japonais fabriqué à la main a un manche en bois de wengé. La hauteur de la lame est d'environ 50,5 mm. Ce couteau ne doit pas être lavé au lave-vaisselle. Les couteaux de cuisine japonais ont une lame très dure mais fine. Il n'est pas permis de couper des produits durs.
204,96 €
241,13 €

Sold out

Japanese kitchen knife Santoku Yu Kurosaki Fujin SG2 ZRF-165SAONWQ 16.5cm
-15% Sold out
Santoku Couteau Japonais Yu Kurosaki Fujin SG2 16.5cm ZRF-165SAONWQ
Santoku of special Fujin SG2 series by Yu Kurosaki. A functionally and aesthetically stunning Japanese knife. The octagonal handle is made this time of oak with a ring of natural turquoise. The blade with the unique Tsuchime forged pattern is crafted from three layers of SG2 stainless steel. In the manufacture of this series, Kurosaki was inspired by Fujin (Fujin) - the Shinto god of the wind, which can be seen in the forged pattern.
226,21 €
266,13 €

Sold out

Santoku Japanese kitchen knife Miyabi 5000FCD 34684-181-0 18cm - 1
-15% Sold out
Santoku Couteau Japonais Miyabi 5000FCD RAW 18cm 34684-181-0
MIYABI 5000 FCD Santoku, 18cm blade length. This Japanese santoku has a hard fine carbide steel core for very good cutting edge retention and sharpness. Santoku translates as "Three Virtues", these being meat, fish and vegetables. The flat cutting edge lends itself to a chopping motion rather than the rocking cutting movement of European chef's knives. The blade core is surrounded by 48 outer layers of steel which make up the unique Damascus-design pattern on the blade. The cutting edge is Honbazuke-honed and symmetrical (not single bevel), so can be used by those both right and left-handed. There is no finger guard so the whole length of the cutting edge can be used. The handle and half-bolster join seamlessly for comfortable use. The smooth surface helps to prevent the formation of calluses on the thumb and forefinger. Hand wash only for best care, and maintain and sharpen using a whetstone. We’d recommend using a wooden chopping board rather than glass, ceramic or stone boards as these will dull the cutting edge. - FC61 fine carbide steel blade core; - 48 layers of steel surrounding the core create the Damascus-design; - FRIODUR ice-hardened for extreme hardness; - Rockwell hardness of approximately 61; - Symmetrical cutting edge; - Pakka wood handle; - Steel mosaic pin and handle end cap; - Made in Japan.
175,48 €
206,45 €

Sold out

Japanese kitchen knife Santoku Yu Kurosaki Fujin VG10 Damascus ZVD-165SAOWQ 16.5cm
-15% Sold out
Santoku Couteau Japonais Yu Kurosaki 16.5cm ZVD-165SAOWQ
Santoku by Yu Kurosaki with Nickel Damascus-patterned blade. Blade has a core of VG-10 stainless steel. Hardness of 60-61 HRC provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of santoku Fujin VG10 Damascus Series is made of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
246,77 €
290,32 €

Sold out

Santoku Japanese kitchen knife Miyabi 8000DP Hibana Rocking 54488-181-0 18cm
-15% Sold out
Santoku Couteau Japonais Miyabi 800DP Hibana Rocking 18cm 54488-181-0
The Miyabi 800DP Hibana Rocking 54488-181-0 supports Western circular motion and Asian chopping. The versatile blade is ideal for chopping vegetables, slicing through meats and preparing fish. Sleek black and brass spacers on the handle add to the beauty and weight that promotes sturdiness in hand and maneuverability at the tip. The MIYABI Hibana collection features a beautiful 49-layer Spark Damascus pattern on the blade that both strengthens and protects the core of FC61 steel. FRIODURx2 hardening improves the microstructure of the steel for improved cutting performance, corrosion resistance and durability. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Handcrafted in Seki, Japan.
191,25 €
225,00 €

Sold out

Santoku Japanese kitchen knife Zwilling J.A.Henckels Twin Fin II 30917-181-0 18cm
-15% Sold out
Santoku Couteau Japonais Zwilling J.A.Henckels Twin Fin II 18cm 30917-181-0
Comfortable santoku knife Zwilling J.A.Henckels Twin Fin II 30917-181-0 is suitable for cutting, chopping, dicing and mincing. With a FRIODUR ice-hardened blade made of Nitro 60 special formula stainless steel, these knives boast long-lasting durability. The curved bolster acts as an extension of the hand and the ergonomic steel handle with gilled design is hygienic and exceptionally well balanced, promoting fatigue-free cutting even for the largest chopping tasks. Ideal for preparing vegetables, meat and fish. Made in Seki, Japan. Dishwasher safe.
74,72 €
87,90 €

Sold out

Santoku Japanese kitchen knife Zwilling J.A.Henckels Twin Fin II 30917-141-0 14cm
-15% Sold out
Santoku Couteau Japonais Zwilling J.A.Henckels 14cm 30917-141-0
Comfortable santoku knife Zwilling J.A.Henckels Twin Fin II 30917-141-0  suitable for cutting and chopping. Ideal for preparing vegetables, meat and fish. With a FRIODUR ice-hardened blade made of Nitro 60 special formula stainless steel, these knives boast long-lasting durability. The curved bolster acts as an extension of the hand and the ergonomic steel handle with gilled design is hygienic and exceptionally well balanced, promoting fatigue-free cutting even for the largest chopping tasks. Made in Seki, Japan. Dishwasher safe.
58,23 €
68,51 €

Sold out

Chef knife Zwilling J.A.Henckels Bob Kramer Euro Stainless Damask 34897-181-0 18cm - 1
-15% Sold out
Couteau de Chef Zwilling J.A.Henckels Bob Kramer Santoku 18cm 34897-181-0
Zwilling Bob Kramer Santoku 18 cm est parfait pour les recettes de cuisine asiatique. Santoku est un couteau utilitaire dans la cuisine et peut être utilisé à la fois pour trancher la viande, le poisson et pour déchiqueter les légumes, les légumes verts ou les épices. Le couteau Bob Kramer de la série Euro Stainless Damask a une lame de 18 cm de long qui peut facilement gérer même les légumes plus gros. Il est recommandé de laver le couteau à la main, d'aiguiser les pierres d'eau et d'utiliser des planches à découper en bois. Les planches à découper en verre, en céramique ou en pierre ne conviennent pas à ce couteau et peuvent endommager le tranchant. Zwilling Bob Kramer Santoku est fabriqué au Japon.
276,93 €
325,80 €

Sold out

Santoku Japanese kitchen knife Yu Kurosaki Senko SG2 Oak wood ZSE-165SA 16.5cm
-15% Sold out
Santoku Couteau Japonais Yu Kurosaki SG2 Oak wood 16.5cm ZSE-165SA
Yu Kurosaki Senkou Ei ZSE-165SA Santoku knife with 165 mm blade. This Yu Kurosaki series features S/S Clad SG2 powdered steel tsuchime-finished blade. The blade surface has a unique hammered Senkou texture which represents Japanese fireworks. A really nice octagon handle made of oak. Handmade by Mr. Yu Kurosaki.
246,09 €
289,52 €

Sold out

Santoku Japanese kitchen knife Kunio Masutani VG-10 Damascus M-3246 14cm
-15% Sold out
Santoku Couteau Japonais Kunio Masutani VG-10 Damascus 14cm M-3246
Kunio Masutani santoku knife M-3246 with 15 cm blade. The very sharp, rustproof blades are ground on both sides and consist of a Damascus steel construction with a robust VG-10 core. The black handle is made of pakkawood. Not allowed to wash in dishwasher.
67,86 €
79,84 €

Sold out

Santoku Couteau Japonais Kunio Masutani VG-10 Damascus M-3221 17cm
-15% Sold out
Santoku Couteau Japonais Kunio Masutani VG-10 Damascus 17cm M-3221
Kunio Masutani santoku knife with 17 cm blade. The very sharp, rustproof blades are ground on both sides and consist of a Damascus steel construction with a robust VG-10 core and kokuryu finish. The black handle is made of pakka wood. Not allowed to wash in dishwasher.
75,40 €
88,71 €

Sold out

Santoku Couteau Japonais Yu Kurosaki Fujin VG10 Damascus Wenge ZVD-165SAW 16.5cm
-15% Sold out
Santoku Couteau Japonais Yu Kurosaki Fujin VG10 Damascus Wenge 16.5cm ZVD-165SAW
Yu Kurosaki Santoku knife with wenge wood handle. Yu Kurosaki Fujin series fearture Nickel Damascus-patterned blades with a core of VG-10 stainless steel for professional with a hardness of 60-61 HRC, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Santoku Fujin VG10 Damascus Series is made of Octagonal-shaped wenge wood. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
183,02 €
215,32 €

Sold out

Santoku Couteau Japonais Kenshiro Hatono VG10 Damascus, Japanese lacquer KH-A 17cm
-15% Sold out
Santoku Couteau Japonais Kenshiro Hatono VG10 Damascus, Japanese lacquer 17cm KH-A
Japanese santoku knife handmade by Kenshiro Hatono. Blade 170 mm made of damascus steel with VG10 core. Japanese lacquer handle. Kenshiro Hatono is a talanted knife maker. Currently he is working in Takefu knife village. This Japanese handmade knife is not allowed to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
129,56 €
152,42 €

Sold out

Santoku Couteau Japonais Zwilling J.A.Henckels 30917-161-0 17cm
-15% Sold out
Santoku Couteau Japonais Zwilling J.A.Henckels 17cm 30917-161-0
Japanese knife Santoku from the Zwilling Twin Fin II series with a blade length of 17 cm is very versatile. This knife combines innovative design with traditional craftsmanship. The result is an unusual knife that will appeal to both amateur and professional chefs. At first glance and for many years to come. Santoku literally means "three advantages", but this utility knife offers much more. This high-quality chef's knife is forged from N60 stainless steel, which features a special blend of chromium and carbon. It fits comfortably in your hand and handles a wide variety of tasks. It can be used to easily cut vegetables, meat and fish. The ergonomically shaped handle makes it easier to work with the Japanese knife, and the decorative gills give the knife a special look. The ice-hardened blade of this kitchen knife is durable and flexible.
71,12 €
83,67 €

Sold out

Santoku Couteau Japonais Yu Kurosaki Fujin R2 ZRF-165SA 16.5cm
-15% Sold out
Santoku Couteau Japonais Yu Kurosaki Fujin R2 16.5cm ZRF-165SA
Fujin R2 Santoku est un excellent couteau santoku japonais polyvalent, esthétique et fonctionnel, fabriqué à la main par le maître Yu Kurosaki. La poignée octogonale est en bois de wengé résistant à l'eau et en minéral turquoise, séparés les uns des autres par un anneau en argent. La lame de 16,5 cm de long présente un motif Tsuchime martelé unique et est en acier R2 à trois couches. Lors de la réalisation de cette série, Kurosaki s'est inspiré de Fujin, le dieu shintoïste du vent, que l'on peut voir dans le motif forgé.
284,48 €
334,68 €

Sold out

Santoku Couteau Japonais Yu Kurosaki SPG2 Damascus Turquoise ZTQ-165SA 16.5cm
-15% Sold out
Santoku Couteau Japonais Yu Kurosaki SPG2 Damascus Turquoise 16.5cm ZTQ-165SA
Amazing Yu Kurosaki Fujin SPG2 Hammered Damascus Turquoise Kiritsuke Santoku knife, 16,5 cm. Crafted with a beautiful full tang design using SPG2 core steel and finished with a sensational Western shaped turquoise handle, this is a real collectors knife and very difficult to find due to the limited numbers made. Weight of Yu Kurosaki SPG2 Damascus Turquoise ZTQ-165SA is about 230 g. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
418,15 €
491,94 €

Sold out

Santoku Japanese kitchen knife Mcusta Classic Pro Zebra HFZ-8003D 18cm - 1
-15% Sold out
Santoku Couteau Japonais Mcusta Zanmai Classic Pro Zebra 18cm HFZ-8003D
Mcusta Zanmai Classic Pro Zebra Santoku knife. Blade lenght is 18 cm. Santoku means 'Three Virtues' or 'To solve Three Problems'. The virtues or problems are slicing, dicing and mincing. The blade of Mcusta Zanmai Classic Pro Zebra santoku knife is made of of Damascus steel (VG-10), 33 layers. The handle is made of pakka wood with mosaic pin. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
145,32 €
170,97 €

Sold out

Santoku Japanese kitchen knife Mcusta Revolution ZRB-1215G 15cm - 1
-15% Sold out
Santoku Couteau Japonais Mcusta Zanmai Revolution 15cm ZRB-1215G
Mcusta Zanmai Revolution Kosantoku is fantastic small japanese chef's knife with a very thin 3-layer steel blade and SPG2 core, a japanese powder steel known for excellent resistance to wear and corrosion. The 62° Rockwell blade displays hardness, toughness, and flexibility for ultimate sharpness and long lasting edge retention.The beautifully designed handle of black pakka wood lies perfectly in the hand and gives a firm and steady grip. The handle of Mcusta Zanmai Revolution Kosantoku is accented with traditional Japanese decorative pin. Blade length: 15 cm. Full length: 30 cm. Weight: 146 gram. Handcrafted in Seki city, Japan.
143,95 €
169,35 €

Sold out

Santoku Couteau Japonais Gihei Hamono Aogami 2 Iron clad GH-502 16.5cm
-15% Sold out
Santoku Couteau Japonais Gihei Hamono Aogami 2 Iron clad 16.5cm GH-502
Japanese kitchen knife santoku by Gihei Hamono. Blade is made of Aogami 2 steel with iron clad. Aogami #2 by Hitachi sometimes called Blue Paper #2 since the steel is wrapped in blue paper. It has a very good edge sharpness and excellent edge retention. This Gihei Hamono santoku has a handle of baked magnolia. Never wash any Japanese knife in a dishwasher. This knife has a thin blade and should not be used on hard items such as bones or frozen foods.
102,82 €
120,97 €

Sold out

Santoku Couteau Japonais Gihei Hamono SLD GH-302 16.5cm
-15% Sold out
Santoku Couteau Japonais Gihei Hamono SLD 16.5cm GH-302
Japanese kitchen knife santoku by Gihei Hamono. The Santoku is the Japanese version of the chef's knife. Blade is made of SLD steel.  SLD stainless steel was originally designed by Hitachi for cutting other steels. It holds an edge as long as a carbon steel, but is much easier to care for. The base of the steel is SKD11 with hardness up to 61-63HRC. This Gihei Hamono santoku has a handle of magnolia. Never wash any Japanese knife in a dishwasher. This knife has a thin blade and should not be used on hard items such as bones or frozen foods.
108,99 €
128,23 €

Sold out

Santoku Couteau Japonais Kunio Masutani VG-10 Damascus Pakka M-3241 17cm
-15% Sold out
Santoku Couteau Japonais Kunio Masutani VG-10 Damascus Pakka 17cm M-3241
Kunio Masutani Santoku knife with 17 cm blade. Santoku means “three virtues” or “three uses”: slicing, dicing, and mincing. You can cut fish, meat and vegetables with the Santoku. However, it is particularly suitable for vegetables due to the rather flat cutting edge profile. The very sharp, rustproof blades are ground on both sides and consist of a Damascus steel construction with a robust VG-10 core with a hardness of 61-63HRC. The black handle is made of pakka wood. Not allowed to wash in dishwasher.
74,72 €
87,90 €

Sold out

Santoku Couteau Japonais Kunio Masutani VG-1 Damascus Walnut M-2761 17cm
-15% Sold out
Santoku Couteau Japonais Kunio Masutani VG-1 Damascus Walnut 17cm M-2761
Kunio Masutani Santoku knife with 17 cm blade. Santoku means “three virtues” or “three uses”: slicing, dicing, and mincing. You can cut fish, meat and vegetables with the Santoku. However, it is particularly suitable for vegetables due to the rather flat cutting edge profile.The very sharp, rustproof blades are ground on both sides and consist of a Damascus steel construction with a robust VG-1 core with a hardness of 60HRC. The octagon-shaped handle is made of walnut wood and is equipped with a clamp made of pakka wood. Not allowed to wash in dishwasher.
102,82 €
120,97 €

Sold out

Santoku Couteau Japonais Miyabi MIZU 32917-181-0 18cm
-15% Sold out
Santoku Couteau Japonais Miyabi MIZU 18cm 32917-181-0
Miyabi MIZU 5000MCT Santoku Japanese chef´s knife with its measuring 18 cm in length is idealy suitable for cutting and chopping  vegetables, herbs and also meat, fish and other products. This series 5000MCT has a core of MC 63, microcarbide powdereel (63 HRC) covered with 2 layers of ice- hardened Cryodur stainless steel. Cutting edge has an angle of 19°. Hammered finish (Tsuchime) which prevents food from sticking to the blade and ergonomic handle of micarta. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Made in Seki, Japan.
191,25 €
225,00 €

Sold out