Filtra per
Prezzo
€ €
Produttori
Lunghezza lama, mm
Paese
Acciaio
Maniglia
Collezione
Durezza
Fodero
Chiusura
Filtro
Blade Nakagawa Satoshi Ginsan Gyuto NG-BGG240 24cm
Sold out
Lama Nakagawa Satoshi Ginsan Gyuto 23.2cm NG-BGG240
Japanese hand-forged blade for gyuto chef knife, master Nakagawa Satoshi. Blade length is about 23-24 cm. Blade is made of ginsan silver-3 steel. 3 layers. Ginsan steel is also known as Ginsanko, or Silver-3 has excellent stainless properties. This is a stainless carbon steel, with 14% added Chromium. Ginsan has similar hardness of Shirogami #2 and almost same edge retention. The high of blade is about 50 mm (may have small differ due hand made). 
289,52 €

Sold out

Japanese kitchen knife Gyuto Nakagawa Satoshi Ginsan NS-GG240 24cm
Sold out
Gyuto (coltello da chef) Coltello da cucina Nakagawa Satoshi Ginsan 24cm NS-GG240
Gyuto knife hand forged by Nakagawa Satoshi. Blade of gyuto chef knife is made of ginsan silver 3 steel. Ginsan steel is also known as Ginsanko, or Silver-3 has excellent stainless properties. This is a stainless carbon steel, with 14% added Chromium. Ginsan has similar hardness of Shirogami #2 and almost same edge retention. This japanese hand made chef knife has the beautiful handle made of stabilized and thermally treated birch with white spacer. The high of blade is about 50 mm. This knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by Japanese chef knives bones and meat with bones, coconuts or other hard products. 
330,65 €

Sold out

Blade Nakagawa Satoshi Ginsan Kiritsuke NG-BGKG210 21cm
Sold out
Lama Nakagawa Satoshi Ginsan Kiritsuke 21cm NG-BGKG210
Japanese hand-forged blade, master Nakagawa Satoshi. Blade is made of ginsan silver-3 steel. 3 layers. Ginsan steel is also known as Ginsanko, or Silver-3 has excellent stainless properties. This is a stainless carbon steel, with 14% added Chromium. Ginsan has similar hardness of Shirogami #2 and almost same edge retention. The high of blade is about 42 mm (may have small differ due hand made). 
273,39 €

Sold out

Kiritsuke Japanese kitchen knife Nakagawa Satoshi Ginsan NS-GKG210 21cm
Sold out
Kiritsuke Coltello da cucina Nakagawa Satoshi Ginsan 21cm NS-GKG210
Kiritsuke gyuto knife hand forged by Nakagawa Satoshi. This is a Japanese hybrid of a chef's knife and a slicer. Blade of kiritsuke knife is made of ginsan silver 3 steel. Ginsan steel is also known as Ginsanko, or Silver-3 has excellent stainless properties. This is a stainless carbon steel, with 14% added Chromium. Ginsan has similar hardness of Shirogami #2 and almost same edge retention. Traditional Japanese mono ebony wood handle. The high of blade is 42.3 mm. This knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by Japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
297,58 €

Sold out

Paring Vegetable knife Zwilling J.A.Henckels Bob Kramer Euro Stainless Damask 34890-101-0 10cm - 1
Sold out
Spelucchino Dritto Coltello da cucina Zwilling J.A.Henckels Euro Stainless Damask Bob Kramer 10cm 34890-101-0
Zwilling Bob Kramer vegetable knife 10 cm is ideal for peeling and slicing vegetables and fruits. The blade has an SG2 powder steel core lined with 100 layers of Damascus steel. The ergonomic and moisture-resistant handle of the vegetable knife is made of micard. Zwilling Bob Kramer vegetable knife is made in Japan.
172,58 €

Sold out

Blade Sukenari HAP40
Sold out
Lama Sukenari HAP40 S/S Clad 27cm S-3N9
Blade Sukenari HAP40 S/S Clad S-3N9 for Kiritsuke knife. Total length is 410 mm. The blade length 270 mm. Manufactured from three layers of steel (San Mai technique) with a cobalt alloyed HAP40 powder steel core with stainless steel clads. Not allowed to wash by dishwasher. It is not allowed to cut by Japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. Weight is 350 g.
290,32 €

Sold out

Japanese kitchen knife Bunka Daisuke Nishida Forge-welded Shirogami 1 DN-11225 18cm
Sold out
Bunka Coltello da cucina Daisuke Nishida Forge-welded Shirogami 1 18cm DN-11225
The Bunka Daisuke Nishida DN-11225 knife is forged by Daisuke Nishida and is one of the greatest, magnificent examples of Japanese knives. Blade 180 mm is made of carbon steel Shirogami No. 1 by forge welding with a black coating. The Daisuke Nishida Bunka has an octagonal walnut handle with a maple ring. The bolster is made of Macassar ebony wood. This knife cannot be washed in the dishwasher. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Daisuke Nishida knives due to handmade may differ slightly from those shown in the photos and sizes. Weight 250 gr.
144,35 €

Sold out

Japanese kitchen knife Sujihiki Ittetsu Tadafusa OEM Aogami 2
Sold out
Coltello da cucina Sujihiki Ittetsu Aogami 2 S/S Clad 27cm ISN-11
Sujihiki Ittetsu OEM Aogami 2 ISN-11 knife with 27 cm blade. The blade is made of Aogami #2 with stainless steel clad, Nashiji finnish. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance. Handle is made of walnut. This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 440 gr.
201,61 €

Sold out

Cherry D-900 15cm
Sold out
Coltello da cucina Yoshimi Kato Petty Aogami Super S/S clad Cherry 12cm D-900
Japanese petty knife hand crafted by Yoshimi Kato. The compact size and relatively narrow blade make this knife very controllable, and also ideal for making precise cuts. Blade is made of Aogami Super steel with stainless steel clad. Blade length 120 mm. Handle – cherry wood. For petty knife made by Yoshimi Kato recommended hand wash with warm water and towel dry. Avoid bones, frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins.
177,42 €

Sold out

Japanese kitchen knife Santoku Yu Kurosaki Fujin SG2 ZRF-165SAONWQ 16.5cm
Sold out
Santoku Coltello da cucina Yu Kurosaki Fujin R2 Fujin SG2 16.5cm ZRF-165SAONWQ
Santoku of special Fujin SG2 series by Yu Kurosaki. A functionally and aesthetically stunning Japanese knife. The octagonal handle is made this time of oak with a ring of natural turquoise. The blade with the unique Tsuchime forged pattern is crafted from three layers of SG2 stainless steel. In the manufacture of this series, Kurosaki was inspired by Fujin (Fujin) - the Shinto god of the wind, which can be seen in the forged pattern.
266,13 €

Sold out

Blade Sukenari HAP40
Sold out
Lama Sukenari HAP40 S/S Clad 27cm S-3N4
Blade 27 cm Sukenari HAP40 S/S Clad S-3N4 for Gyuto knife. Manufactured from three layers of steel (San Mai technique) with a cobalt alloyed HAP40 powder steel core with stainless steel clad. Total length is 410 mm. Stainless steel clads. Not allowed to wash by dishwasher. It is not allowed to cut by Japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. Weight is 350 g.
290,32 €

Sold out

Japanese kitchen knife Daisuke Nishida Funayuki DN-11211 16.5cm
Sold out
Coltello da cucina Daisuke Nishida Funayuki 16.5cm DN-11211
The Funayuki DN-11211 knife is forged by Daisuke Nishida and is one of the greatest, magnificent examples of Japanese knives. Funayuki was originally used by fishermen to prepare meals at sea. This is a universal knife, it is equally convenient for them to butcher medium-sized fish, butcher its fillet and cut vegetables. Funayuki combines the look of a deba, a nakiri, and a yanagiba. Blade 165 mm is made of carbon steel Shirogami No. 1 by forge welding with a black coating. The Daisuke Nishida Funayuki has an octagonal walnut handle with a maple ring. The bolster is made of Macassar ebony wood. This knife cannot be washed in the dishwasher. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Daisuke Nishida knives due to handmade may differ slightly from those shown in the photos and sizes. Weight 240 gr.
137,10 €

Sold out

Chef knife Miyabi 5000MCD 67 Gyutoh 34401-201-0 20cm - 1
Sold out
Gyuto (coltello da chef) Coltello da cucina Miyabi 5000MCD 67 20cm 34401-201-0
Zwilling Miyabi 5000MCD 67 japanese gyutoh or chef's knife has a MicroCarbide powder steel MC66 core which gives extremely good sharpness and cutting edge retention. The blade has 132 outer layers of steel which surround the core and make up the unique Damascus-design pattern on the blade. The cutting edge is Honbazuke-honed and symmetrical (not single bevel), so can be used by those both right and left-handed. There is no finger guard so the whole length of the cutting edge can be used. The black Ash wood handle sits comfortably in the hand, allowing firm control and tireless working. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Rockwell hardness of approximately 66. Zwilling Miyabi 5000MCD 67 gyotoh chef's knife made in Japan.
362,10 €

Sold out

Santoku Japanese kitchen knife Miyabi 5000FCD 34684-181-0 18cm - 1
Sold out
Santoku Coltello da cucina Miyabi 5000FCD RAW 18cm 34684-181-0
MIYABI 5000 FCD Santoku, 18cm blade length. This Japanese santoku has a hard fine carbide steel core for very good cutting edge retention and sharpness. Santoku translates as "Three Virtues", these being meat, fish and vegetables. The flat cutting edge lends itself to a chopping motion rather than the rocking cutting movement of European chef's knives. The blade core is surrounded by 48 outer layers of steel which make up the unique Damascus-design pattern on the blade. The cutting edge is Honbazuke-honed and symmetrical (not single bevel), so can be used by those both right and left-handed. There is no finger guard so the whole length of the cutting edge can be used. The handle and half-bolster join seamlessly for comfortable use. The smooth surface helps to prevent the formation of calluses on the thumb and forefinger. Hand wash only for best care, and maintain and sharpen using a whetstone. We’d recommend using a wooden chopping board rather than glass, ceramic or stone boards as these will dull the cutting edge. - FC61 fine carbide steel blade core; - 48 layers of steel surrounding the core create the Damascus-design; - FRIODUR ice-hardened for extreme hardness; - Rockwell hardness of approximately 61; - Symmetrical cutting edge; - Pakka wood handle; - Steel mosaic pin and handle end cap; - Made in Japan.
206,45 €

Sold out

Japanese kitchen knife Gyuto Ittetsu Tall Shirogami IW-11844 21cm
Sold out
Gyuto (coltello da chef) Coltello da cucina Ittetsu Tall Shirogami 21cm IW-11844
Tall gyuto chef knife with a wide 60x210 mm blade. Weight 440 g. This kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
149,19 €

Sold out

Blade Sukenari ZDP-189 S-1N7 21cm
Sold out
Lama Sukenari ZDP-189 21cm S-1N7
Sukenari blade for kiritsuke knife. Made of ZDP-189 steel. Weight is 190 g. Total length is 315 mm. Stainless steel clads. Not allowed to wash by dishwasher. It is not allowed to cut by Japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
266,13 €

Sold out

Japanese kitchen knife Bunka Ittetsu Tall Shirogami IW-11843 21cm
Sold out
Bunka Coltello da cucina Ittetsu Tall Shirogami 21cm IW-11843
Tall bunka knife with a wide 60x210 mm blade. Weight 450 g. This kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
181,45 €

Sold out

Japanese kitchen knife Bunka Ittetsu Tall Shirogami IW-11842 18cm
Sold out
Bunka Coltello da cucina Ittetsu Tall Shirogami 18cm IW-11842
Tall bunka knife with a wide 57x180 mm blade. Weight 400 g. This kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
149,19 €

Sold out

Japanese kitchen knife Santoku Kunio Masutani VG-1 M-1321 17cm
Sold out
Santoku Coltello da cucina Kunio Masutani VG-1 17cm M-1321
Santoku knife made by Kunio Masutani. Hand forged balde is made of 3 Layer VG-1 steel with hammered finish. The handle is made of mahogany wood. Weight is 155 g. Not allowed to wash in dishwasher.
116,94 €

Sold out

Japanese kitchen knife Nakiri Yoshimi Kato Petty Aogami Super
Sold out
Nakiri Coltello da cucina Yoshimi Kato Petty Aogami Super S/S clad Cherry 16.5cm D-902
Nakiri knife made by Yoshimi Kato. Blade is made of Aogami Super steel with stainless steel clad. Blade length 165 mm. Weight 265 g. Handle – cherrywood. Recommended only hand wash with warm water and towel dry. Avoid bones, frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins.
216,94 €

Sold out

Japanese kitchen knife Santoku Yu Kurosaki Fujin VG10 Damascus ZVD-165SAOWQ 16.5cm
Sold out
Santoku Coltello da cucina Yu Kurosaki Fujin VG10 Damascus 16.5cm ZVD-165SAOWQ
Santoku by Yu Kurosaki with Nickel Damascus-patterned blade. Blade has a core of VG-10 stainless steel. Hardness of 60-61 HRC provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of santoku Fujin VG10 Damascus Series is made of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
290,32 €

Sold out

Japanese kitchen knife Bunka Yu Kurosaki Fujin VG10 Damascus ZVD-165BUOWQ 16.5cm
Sold out
Bunka Coltello da cucina Yu Kurosaki Fujin VG10 Damascus 16.5cm ZVD-165BUOWQ
Yu Kurosaki Bunka knife with Nickel Damascus-patterned blade with a core of VG-10 stainless steel. Hardness of 60-61 HRC provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Bunka Fujin VG10 Damascus Series is made of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
290,32 €

Sold out

Japanese kitchen knife Nakiri Yu Kurosaki Fujin VG10 Damascus ZVD-165NAOWQ 16.5cm
Sold out
Nakiri Coltello da cucina Yu Kurosaki Fujin VG10 Damascus 16.5cm ZVD-165NAOWQ
Yu Kurosaki Fujin series nakiri with Nickel Damascus-patterned blades with a core of VG-10 stainless steel. Hardness of 60-61 HRC provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Nakiri Fujin VG10 Damascus Series is made of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
290,32 €

Sold out

Peeling Vegetable knife Zwilling J.A.Henckels Twin Grip 38186-060-0 6.5cm
Sold out
Spelucchino curvo Coltello da cucina Zwilling J.A.Henckels Twin Grip 6.5cm 38186-060-0
The ZWILLING TWIN® Grip Knife for Cleaning Vegetables 38186-060-0 with a blade length of 6.5 cm has a sturdy and suitable for everyday use design. Thanks to the ergonomic non-slip plastic handle, the knife fits comfortably in your hand, which allows you to work without fatigue. Thanks to special stainless steel, this peeler is durable, resistant to corrosion and the blade remains particularly sharp. Vegetables and fruits can be peeled without significant loss of the product itself.
6,45 €

Sold out